Please help - Brand new 8831 conf phone won't boot

Not sure how to troubleshoot these new phones, but when I power the phone via wall power (power cube) or 48v POE, the phone LEDs stay on for a second or two then go out, and then the phone does nothing. No display or additional blinking lights - nothing. At first I thought it was a bad power cube, so I tested on a working POE, and nothing. I'm wondering if this was shipped DOA or what. Any suggestions would be greatly appreciated!

Hi,
Try the suggestions as per the following post including a factory reset, if it still fails it will need a RMA.
https://supportforums.cisco.com/discussion/11947981/8831-doesnt-boot
HTH
Manish

Similar Messages

Brand New MacBook Pro 15" Won't Boot from CD only

This Macbook (which I just bought today) seems to refuse to boot CDs.
- Booting from the normal hard drive works fine.
- Loading the CD from the OS when booting from the hard drive works fine (I can interact with the CDs normally)
- Same problem with Apple OS disk & self-burned TechTool Pro disk
I've tried resetting the PRAM three times now. Any idea what's wrong?

Hmm, I hadn't tried booting the system restore CDs that came with it. Turns out they work just fine. The two CDs I was trying to boot (but aren't working) are:
- Micromat TechTool Pro 5.0.4 (self-burned on a Gigaware DVD-R)
- Mac OS X Snow Leopard OEM (bought independent of this machine when Snow Leopard was first released)
I've since tried resetting the SMC by another Apple Support article (http://support.apple.com/kb/HT3964) to see if that helps. My TechTool DVD still won't boot, and I haven't tried the Snow Leopard disc yet, but the CDs that came with the MacBook work fine.
It's also interesting in "how" it "doesn't work".
(By CD in the following points, I mean the TechTool CD):
1. I insert the CD when the system is running normally. I can install TT, and browse the contents of the CD without issue.
2. I restart the machine, holding down the Option key. Both my HD and the TT CD appear as bootable options. I select the CD.
3. I get the grey Apple, but the "spinning wheel" never appears. After a few minutes, all noise from the super drive dies, and the system sits there interminably.
Both the burned TT and Snow Leopard CDs boot just fine on my girlfriends older 13" white MacBook. Any reason why mine would boot some CDs and not others, when the others boot fine on other systems?

Please help - Brand new X1 Carbon defective out of the box - is this normal? what should I do next?

Hello all,
So, as a loyal Lenovo customer I decided to purchase the X1 Carbon 2nd Gen (non-touch, I5 version).
Last week I finally received it.
Unfortunately, the first thing I noticed was a defective touchpad - very loose, the right bottom corner was not solid
enough and made a weird noise while clicking it. It drove me crazy since I am used to the top build quality the Thinkpad series offers.
I took to the local Lenovo service center, they actually replaced it on the spot and it made it better, not great but better. I still think there is something wrong there, since the bottom two "buttons" don't feet and sound as good as the upper ones.
But that I can tolarate.
The thing that really pissed me off was this: To me demise, after using the laptop in a dark room I noticed this massive screen bleed :
(apologize for the ling stream of pics, didn't know how to thumbnail them)
My question to you guys, is this okay? is this an acceptable bleed? or should I do whatever it takes to get it repaired/replaced?
I just hope they will know how to handle this here at local center, as from my experience dealing with computer reps here, the local Lenovo agent (which is actually the importer) will not replace it for me (their excuse is that it wasn't bought in this country)
This is amazing, in one year Lenovo has lost it's entire reputation over the 2nd Gen X1 carbon.
Please help me. what should I do?
Thank you very much.

The official method of creating / escalating to a complaint is to call support, with previous call numbers handy, and request the representative to escalate your case to a complaint. They will then create a complaint on your behalf and also be able to inform you about the complaints proceedure.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HELP - My new Nokia Lumia 620 won't boot up, even ...

I'm worried my Nokia Lumia 620 is a lemon, and the Care Centre will just keep taking it in for repair. The reliability so far has been disappointing, especially as I was giving Nokia a try after a 10 year break, and also trying out Windows Mobile / Phone after a 6 year break. I want to recommend it - I'm continually being asked by friends and colleagues what I think of my new phone.   Nokia will be smart to just replace it.
The details: my Nokia Lumia 620 won't boot up today (again). It hung on boot this morning with the Nokia Logo. That was over 2 hours ago. It had this problem during February, and I returned it twice for repair to the local Nokia Care Centre. I guess I'll take it in again later today, but it just feels like a lemon handset so far.
Timeline:
Handset purchased in local Nokia Store on Jan 29 2013 ( 7 weeks ago)
Handset gave "Exclamation-Mark-Screen-of-Death" on Feb 19 2013 (3 weeks old handset)
Local Nokia Store sent me to local Nokia Care Centre, handed in overnight "for repair"
Phone returned on Feb-20-2013 after software refresh.
Worked fine for 1 week.   Problem returned Feb 26 2013. (4 week old handset)
Nokia Care Centre "replaced motherboard" on Feb 27 2013.
Has worked fine for 3 weeks.   Now Lumia 620 won't boot this morning - no Exclamation Mark, instead it's the Nokia Logo on boot.
The handset is 7 weeks old.
Hard reset (side-button-combination) hasn't worked either.
Any advice on getting this working, repaired or replaced?

Update on the repair - it didn't work. I returned the phone to the Yau Ma Tei Nokia Care Centre on March 20th, and was given what was termed a 'replacement' phone. I was pretty happy. All was well. But two days later when I tried to make a phone call using my headphones, I noticed that only the left audio channel was working through the earphones. I tried a second pair of earphones and the same problem. The audio was only working through the left channel. On a new phone. How strange.
So was it really new? My suspicion is that the repair centre has used old returned parts (parts they perhaps term as refurbished) - so in fact my replacement phone is my old phone assembled with old and refurbished parts. Was it in fact a refurbished phone assembled from refurbished parts? Frustrating when they tell me it's a replacement phone.
That was back in late March. I posted a couple of tweets and Nokia responded. They even phoned me to try and help. However no offer of a new phone. All they suggested was that I revisit the Nokia Service Centre. For a 4th time.
That was about 6 weeks ago, and I simply haven't made the time to go to the Service Centre again. It's hard to find the time when my last 3 visits have been so unsuccessful.
Sometimes you just get a lemon. It happened to me once before with a different manufacturer when I was on a contract and had to live with a phone for 2 years that kept cutting out during calls. Same problem - the manufacturer attempted to repair it, but it just never worked properly. That was 10 years ago. Now it's happening with my new Nokia. Luckily I'm not on contract this time. I've read good reviews for the Lumia 620, and overall it's a pretty decent handset in every other way.
But the issues this particular handset has been plagued with has overshadowed any positive feelings I have been having. I'll probably be cutting my losses and changing handsets in the summer.

Please Help!!! Macbook Pro Won't Boot Up

I purchased a new Unibody Macbook Pro about 2 months ago, and I haven't had any problems with it up til now. When I power it on, it stays at the white startup screen with the Apple logo, and the spinning loading circle. After a few mins, I touched the trackpad, and a grey background comes up and it says "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again" Of course I did this, and it just does the same thing. Please Help!! Thanks in advance.

That is a kernel panic. They can be caused by software or hardware. If there are any devices connected to the computer, disconnect them and try again. If not, insert the install disk that came with the computer and start up from it.
When the disk in is, click the Apple and select Restart. Once the screen is black, hold the C key until you see the spinning gear under the Apple logo.
Hopefully, it will boot to the install disk. If you get another kernel panic during this process, the issue is hardware and you will need to have the computer serviced.
If it boots, select English and go to the next screen. Stop there. Click Utilities from the top of the screen and open Disk Utility. Select the hard drive on the left and run Repair Disk. This will check for any disk errors.
Post back your results.

Brand new iMac 27 2011 won't boot after Lion upgrade

Got a brand new iMac 27 2011 yesterday and did an update to 10.6.8 first before installing OSX Lion over it...
After restarting it just shows then the "prohibitive icon" on screen and shuts down after few seconds...
It won't even boot from an USB stick with the OSX Lion image on it...
Recovery partition works but can't do a reinstall from there....
So going back to 10.6.8 now...

Just so you know I purchased brand new imac in July and did the same upgrade as you. I just installed Lion but did not have any issues. Only one concern overall though, it slowed down my new imac a bit. Not sure if there are settings or not but Leopard was faster than this. AppStore, iTunes are eating lot of memory and CPU util goes up.

PLEASE HELP!!!! Laptop won't boot up!

Last night, I closed the lid on my laptop without shutting it down or putting it in Sleep Mode, but when I got up this morning, my laptop was really warm and I couldn't get the screen to come back up. So, I manually shut it down and restarted it. When it booted up, I logged on and everything froze up within two minutes afterwards. So, I manually shut it down again (because everything was frozen) and I restarted it back again in Safe Mode and everything works fine. But the USB drives and the speakers aren't working in Safe or regular mode, so I'm not really sure what's going on. My laptop did this before (about 2 weeks ago), but I did a system restore and everything went back to normal, so I'm not sure what exactly is the issue now, because I've done another system restore and it didn't help. If anyone has any information on what this could be, please help. I have some important documents that I haven't backed up and I'd hate to lose them all since I can't use the USB ports to get anything off.
(I have a Satellite L-505D using Windows 7)

Can you do a Chkdsk from safe mode? Select all the options and let it run. Be patient.
Also try to system restore from something further back in time. Probably the restore image you used was no good.
Pull the battery out, reboot, reload the default settings in BIOS. Put battery back in later.
If you are able to fix it, make a habit of backing up things regularly. Use an external drive or second hard drive. You can automate backup too. Also consider purchasing something like RollbackRX to help correct things quickly.

Please Help: Brand new to Logic and Mac at the same time

Dear Board,
I joined the Mac family yesterday and have done pretty well with getting Logic and Cubase 4 installed on the Mac. (It's like trying to learn Spanish when you're from Alabama)
However, when I assign an instrument track to ESX sampler, no libraries or presets come up. I can hear one sound, but when I pull down the menu to load another sound, there are no other sounds to be found. Do I have them stored in the wrong place or did they not automatically load when I installed Logic?
Specifically, I am looking for a decent acoustic piano sound, but can't make it work.
I migrated from Logic 5 on PC to this setup yesterday, so it's all new to me. Any help you can give will be appreciated.
Thanks,
B3
Mac Pro Mac OS X (10.4.8) Logic 7.2

Well a fellow Las Vegan, that is something I
havent seen since I have been on this forum.
Anyway welcome and good choice to go with
Logic Pro 7. This app is a constant challenge.
First I have to ask an obvious question, did you
install the contents disc? That is the one with all
the samples on it. Since you have been using a
different version, I assume you know how the
EXS works so that should not be the issue.
If you click on the black area no menus come up?
Or do empty menus come up? We will get it going,
this sounds like misplaced files. Phil

Brand new x64 using ethernet won't stop spooling

Brand new 5740 using ethernet won't stop spooling. I can copy but I can't printing from HP Envy. It looks like the message is not reaching the printer.

Hi @gleongelpi
Let's first run the Print and Scan Doctor. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
If the issue perists, hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properties
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
Please let me know if the issue is resolved and the outcome of the Print and Scan Doctor if you require further assistance. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

boomer1630 wrote:
- i have a Samsung S3)
-I have tried using *228 to update.
You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through. The PRL updates are handled by the SIM card.
Try this and see if it helps: turn off the phone, remove the SIM card, and wait a few minutes. Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

My router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me

my router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me

naaa didnt work if you or any body else has any other ideas im open cuase now im thining about just taking it into apple and getting a new one but my friend said that he recently did the exact same thing and the apple store declined him cuase it was jailbroken sooo i really dont know what to do ....the purpose of getting the knew ipod was to have imessge and the new facetime and know that it isent working i dont know what to do or how to do it the correct way...............but thnk u Eric Ross and llaass

HT4623 Could you please help me to unlock my phone

I have an iPhone 4 32GB (black)and it's already out of contract so I think it's eligible to unlock as well.
Could you please help me to unlock my phone so I can use it with other carriers in other countries. I'll appreciate for your response.
My IMEI numbers is: 012427009166282
My hardware serial numbers is: 86025A71A4T
Please let me know if you could help me out. Thanks again.

ONLY the carrier to which it is locked can unlock it. no one else.
Contact that carrier and ask if they offer this service and if you qualify
You should not leave your iphone information on a public forum.

Dear Apple, I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone. Could you please help me to unlock my phone so I can use it with o

Dear Apple,
I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone.
Could you please help me to unlock my phone so I can use it with other carrier Sims. I would appreciate it.
Please let me know if you could help me out. Thanks again.
<Edited by Host>

Like ckuan said, Apple does not unlock iPhone; your carrier does, provided that the carrier offers this service.
Unfortunately, SoftBank does not offer authorized unlocking of iPhone.
Your best option is to sell this phone and buy another iPhone from the carrier of your choice or better buy a factory unlocked iPhone so you would be able to use it with any compatible GSM carrier around the world.

Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

The battery capacity on a 5S is a little better but be sure to read the special notes on conserving battery power on these phones. Here are two in particular.
17 Tips to Extend iPhone Battery Life (Updated for iOS 7)
How to improve iPhone battery life, what to do if your iPhone battery is running low - How to - Macworld UK
Regards, 71

HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards.

Please help - Brand new 8831 conf phone won't boot

Similar Messages

Maybe you are looking for