Please help : how to know the caller ?

Hi,
suppose servlet 'C' can be called by servlet 'A' and servlet 'B'.
How can servlet 'C' know by which servlet it has been called ? Is there something foreseen in HttpServletRequest ?
Thanks,
Javamad.

If it needs to know that -- and in a good design it should not need to know that -- you could store something in the session object to indicate it.

Similar Messages

Please help me to know the answers

Hi ALL,
Please help me to know the answers
What is the role of the container element in BPM?
What is the difference between Idoc and RFC adapter ? How to decide which one will be used?
How to restart the adapter engine or J2ee engine?
What is the role of wndows1 and windows2 in SXMB_MONI?
Is it possible to see the message after mapping ?If it is possible how to check?
Regards,
Somenath

Hi somenth,
What is the difference between Idoc and RFC adapter ? How to decide which one will be used?
A)in case of sender idoc means Sender IDOC adapter need not be configured because IDOC adapter
lies in ABAP engine - IDOC adpter resides in Integration engine.
Incase of receiver, whatever is the adapter, you need an adapter configuration and receiver
agreement - from the IE, the xml msg need to be sent to pipeline of idoc adapter,
so you need a recever agreement......
IDOC #
Idoc Adapter: The next most commonly used adapter is Idoc adapter for sending and receiving Idocs from SAP XI.
The foremost step before configuring the idoc adapter is the system settings that have to be done
Details:
In the case where we encounter a standard IDOC provided by SAP or Situation where a mapping is available or
an IDOC as well as a BAPI exits, the approach will be dependent on the specific integration scenarioo......
for For example, options might be
1) sending one IDOC at a time
2) combing multiple IDOCS and sending as a single IDOC.
3) making one single RFC call, for each business transation.
4) avoiding multiple calls to the same BAPI / RFC by deploying a wrapper BAPI and sending all records in one call.
5) Using the proxy and sending all data in one shot and making single calls to the BAPI from the proxy.
proxy and rfc adapter #
a proxy on the SAP application system should be used while interfacing with a standard BAPI or remote enabled
function modules on the application system. the proxy will be invoked by SAP PI/XI and on the application system
the proxy will call the BAPI. in SAP systems with WEB AS versions <6.20 the proxy option is not available and hence
the RFC adapter should be used insted.
Disadvantage:
pre-built meta data and the mapping that SAP delivers will not be usefull as the BAPI is wrapped with a proxy.
so if the pre-defined integration content is not taken into account the proxy should be used insted of configuring
the RFC adapter and calling the BAPI / RFC
Advantage:
it bypasses the adapter engine and directly interacts with the application system and integration engine thereby
enchancing the performance
2 )What is the role of the container element in BPM?
A)The workflow container contains an element which is defined with a data type reference to the same object type that is created in the referenced task, this binding definition is proposed automatically when an activity is defined.
If no element with an appropriate data type reference is available in the workflow container, a suitable element is added to the workflow container and the binding entered.
Defines the data for a business process and to enable data to be transferred between the individual steps of the business process.
consists of an unlimited number of container elements.
Container elements ( Variable declaration)
Consists of a name to address data in the process
Can be typed to
*Simple XSD ypes :XSD:data,XSD:time,XSD:integer, XSD:string.
*Abstract interface
*Receiver
*Can be multiline ( a vector of the types above)
3)How to restart the adapter engine or J2ee engine?
SMICM
4)What is the role of wndows1 and windows2 in SXMB_MONI?
Window1 and window2 will get you the message payload
we can check the messages in SXMB_moni
regards
srinivas

Please help how to pass the dynamic value to VO -- Urgent.

Hi,
I have an Oracle Standard VO( SQL Query). As per my requriemnt i extended standard VO with one new feild.Now i want to query the new VO dynamically.
How to pass the dynamic values to new query?
for refence i am giving my old query.
select
secondary_inventory_name as SubInventoryName,
description as Description,
from mtl_secondary_inventories
my new Query is like this:
select
secondary_inventory_name,
description,
Item
from mtl_secondary_inventories
where item='123456'
I want to pass this "where item="123456" as dynamically. please help where i will do the change's.
Thanks,
Sekhar.

Hi,
thanks pratap for quick response...but i am extending VO from Standard VO.
I have a Standard VO which contains a bind variable suppose :1.
I have extended this above standard VO and i want to add another bind variable say :2 to the custom VO.
Please tell me how will i pass bind parameter value to the bind variable in runtime ?
what are files i want to change?
Thanks,
Sekhar.

Please help me to know the tables which contain details of APD and Open hub destination

Hi experts,
I need to know the list of APDs that have been created in our system. So can you please let me know the table name (if there is any) which contains the name of the APD and as well as the status (active / inactive) of the APD.
Thanks ,
Shalini

Hi Shalini,
Go to RSANWB T-code and select any analysis process. Then press the "monitor" button. On the monitor screen, you can see the selection criteria in a table on the right. Now double-click on the table and a popup will come up where you can set the selection criteria. in particular, you can set the time frame and the analysis process selection.
Hope it 'll help you..........
Regards,
Mukesh

Please help how to undo the post in general ledger?

dear all,,
please help me ?
we have R12 Orcale.
I made a post in general ledger for closing purpose ??
now I want to undo post whatever I posted should return back as it is ??
how I can do it ??
for more clarification
for closing the account period we went to the general ledger than post journal after that we select the period name than we select find ?
after find I made tick to all the transactions there than I posted ?
my question How I can cancel the post or undo and keep it as it is ??
please help

A posted journal batch can not be deleted, You can reverse it to nullify the accounting effects of the posted journal batch.
refer MOS note:
Can a Posted General Ledger Journal Entry be Deleted? [ID 135532.1]
regards,

Receiving a call (how to know the call from) city

Hi, I would like to know if it's possible when you receive a call to be able to know the city of the number calling from like iphone does.
thank you for you help
Solved!
Go to Solution.

I've noticed that my phone doesn't do that either. I'm coming from a galaxy s2 on boost mobile. My old phone didn't do it for a while until I got an update from 4.0 to 4.1. It was then built into the operating system. So, unless you go with the recommendation of downloading an app, then I'm guessing that it won't be available..
Unless BlackBerry decides to include it in a future update.. which I'd be a fan of!

Please help : How to make the anomalistic table just like below?

Hi all,
How to make the anomalistic table just like below? Anyone can give the way detail or thoughtway ?
http://61.132.17.188/webber/table.gif

This is just a suggestion.
If you put your "JTable" in a "JScrollPane", then you can add any "java.awt.Component" to the corner of the "JScrollPane" -- using the "setCorner()" method (of "JScrollPane").
I would suggest making a custon "JPanel" and overriding its "paintComponent()" method to draw a diagonal line (and the required text) on it.
You can find out more about how to do this from the links I provided in my first reply.
Hope this helps.
Good Luck,
Avi.

Urgent: Please help. how to solve the time delay during buffer read and write using vc++

I need to continuously acquire data from daqmx card, write into a file and at the same time corelate (in terms of time) the data with signals from other instruments. The current problem is that there is time delay during read and write data into buffer,thus causing misalignment of the data from multiple instruments. Is there a way to solve the delay? or Is there a way to mark the time of the data acquisition in the buffer? If I know the starting time (e.g. 0) of data acquisition and sampling rate (e.g. 1kHz), can I simply add 1ms to each data sample in the buffer? The current code is shown below.
void DataCollectionWin::ConnectDAQ()
DAQmxErrChk(DAQmxCreateTask ("", &taskHandle));
    DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0,Dev1/ai1,Dev1/ai2,Dev1/ai3,Dev1/ai4,Dev1/ai5,Dev1/ai16,Dev1/ai17,Dev1/ai18,Dev1/ai19,Dev1/ai20,Dev1/ai21,Dev1/ai6,Dev1/ai7,Dev1/ai22","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
  DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandle,"",1000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,60000));
  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,50,0,EveryNCallback,NULL));// Every 50 samples the EveryNSamplesEvent will be trigured, to reduce time delay.
  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
  DAQmxErrChk (DAQmxStartTask(taskHandle));
int32 CVICALLBACK EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void *callbackData)
DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,50,10.0,DAQmx_Val_GroupByScanNumber,data,50*15,&read,NULL));
   //memcpy(l_data,data,6000);
SetEvent(hEvent);
l_usstatus_e[0]=g_usstatus[0];// signals from other instruments that need to be corelated with the data from daq cards.
l_optstatus_e[0]=g_optstatus[0];
if( read>0 ) // write data into file
   //indicator=1;
for (i=0;i<read;i++)
{  //fprintf(datafile,"%d\t",i);
  fprintf(datafile,"%c\t",l_usstatus_s[0]);
  fprintf(datafile,"%c\t",l_usstatus_e[0]);
        fprintf(datafile,"%c\t",l_optstatus_s[0]);
  fprintf(datafile,"%c\t",l_optstatus_e[0]);
          fprintf(datafile,"%.2f\t",data[15*i]);
//   sprintf( pszTemp, "%f", data[6*i]);
// pListCtrl->SetItemText(0, 2, pszTemp);
    //pWnd->m_trackinglist.SetItemText(0, 2, pszTemp);
     fprintf(datafile,"%.2f\t",data[15*i+1]);
     fprintf(datafile,"%.2f\t",data[15*i+2]);

Hello kgy,
It is a bit of a judgment call. You should just choose the board that you think has the most to do with your issue. For example, this issue was much more focused on setting up your data acquisition task than the Measurement Studio environment/tools, so the MultifunctionDAQ board would have been the best place for it. As for moving your post to another board, I do not believe that is possible.
Regards,
Dan King

PLEASE HELP How to Activate the Correlation with the workflow ?

Hi everyone,
I am trying to retrigger a workflow with object (QMSM) using another Object event (BUS2007 event TECCOMPLETED )
The objects are QMSM(complete task) and BUS2007(Plant Maintenance order) .
I tried to do that using correlation but I am stuck in the following step because there is no name of the event there to choose from.
*3. Select the event for which the correlation is to be activated and the correlation to be activated*
The procedure I used was from this link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/26/0b8b3f81fef93de10000000a114084/frameset.htm
Things done so far:
Defining a Correlation
Defining a Wait Step: Wait for Event with Correlation
Not done: Activating a Correlation
Please help everyone.
Edited by: SAMI JAPR on Apr 29, 2008 6:34 PM

You need to add events under WF header, version-dependent---> events.
Regards, IA

Please help, how to guide the user to deploy a web application easily.

hello,
i have created an application which creates a new web application every time it is run. now i am writing the documentation of it and dont know which web server the client may have so i have to write / show to the user general steps that he should follow to deploy the web application after it has been created.
i have written that the user should deploy the web app by making the following entry into the server.xml file (for tomcat)
<Context path="/webappname" docBase="webapppath"></Context>
it is not compulsary that the user should place the web application in the webapps directory of the server hence the above webapppath is used.
now i want to indicate to him where and before / after which tag and under which host name etc the above line should be added in a manner that he is able to do it properly.
please anyone can help me how to do it.

i would like to know if there is any way without Java web start.
it has to be set manually.
i.e every user should make this entry in the server.xml so that the context is set.

Please help - Getting to know the Hardware-Revision of an T60p

Hi there! I own an T60p,like it very much cause of WUXGA and Flexview an would like an Dealer to upgrade the processor cause of my needs.
Thinkwiki told that core2duo are only possible if the mainbord comes from Hardware-Revision 3. I am afraid I dont know if this is the case. How can I see if this is the case? Thanks

i would like to know if there is any way without Java web start.
it has to be set manually.
i.e every user should make this entry in the server.xml so that the context is set.

Please Help - How to Fetch the Data from a Cube

Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi Krishna

You appear to have the wrong forum. This forum is for the Oracle Workspaces application, which is a component of Oracle Collaboration Suite.
Perhaps one of the forums in the database section will be more relevant:
http://forums.oracle.com/forums/category.jspa?categoryID=18
regards,
-Neil.

I have iphone 4 ios 6.1.3. My wifi disconnects everytime i lock my phone. Please help if you know the solution

Please help

But still its a disadvantage. Suppose my phone is in sleep mode and i get a chat message or some email. I wont get it at that moment, but after turning on my wifi manually, i'll receive the message. Dont you think its irritating?

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Hello - does anyone now how to place a complain for an over charged invoice over a in-purchase game? Apple is charging 10 times more the purchase we made and I cannot find anyplace in the App store to complain online or via email? Please help if you know

Hello - does anyone now how to place a complain for an over charged invoice over a in-purchase game? Apple is charging 10 times more the purchase we made and I cannot find anyplace in the App store to complain online or via email? Please help if you know

Use the Report a Problem link in the iTunes email receipt you received. Also in-app purchases can be made without the password if you bought the app within the last 15min. You should enable the in-app restriction in Settings.

Please help : how to know the caller ?

Similar Messages

Maybe you are looking for