Please help me interface visa to c8051f320 Mc

is the driver of c8051f320 necessary to be installed while interfacing it through visa? what if the driver is unavailable ? is there any other way out?

Hey sallu,
I am having trouble finding information on the c8051f320. Is this a part number for a NI device? If so, could you post the model number (NI-####)? If not, then could you post the manufacturer and model of the device? Also, what driver are you talking about?
Thanks,
Jason W
Application Engineer
National Instruments

Similar Messages

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

PLEASE HELP, AUDIO INTERFACE PROBLEMS

hi, i just got a new macbook and logic express 7. i also just uploaded something for this audio interface iv got, the tascam US122. but it is not recognising it. the light for phantom power comes on if i plug the usb cable into my mac from the tascam but it doesnt come up anywhere on my mac to say that it has recognised it. if you could help pleeease do.
thanks

Hi,
The Tascam US122 is no longer a supported device. Try to go to the Tascam website, and see if they do have a driver that can run in your particular Mac.
If not, then you're S.O.L.
Cheers

Can't access Facebook on my iPad mini. When ever I try to login, it says go to settings.. And in setting I am asked to renter the password, after that nothing happens on screen. Please help.

I am unable to access my Facebook account on iPad mini. When ever I try to login, it says go to setting and there i am asked to renter the password. After entering the password nothing happens, neither the option of done gets activated and nor anything happens automatically.
But when I press the return button, it says that "Error: we are unable to connect to sever".
Please help.

Problem solved
Visit the below URL to solve the problem: http://howtoapple.com/facebook-login-issues-ios-7/

Why is my app in the app store is all need to purchase with visa and such other things? As a example i wanted to update the clash of clan apps, but it keep saying that i have to do a billing thing. Please help me.

Im currently new to this iphone. Im using iphone 5s with a version iOS 7.1.1. My problem is what is wrong with my app store? It keep telling me to update my billing method. Was all apps in the app store is need to be purchase. Such as i wanted to update my clash of clan game. It keep telling me to fill in my billing method. I already fill in the billing method, but it say that "There is a billing problem with a previous purchase. Please update you payment method. " i don't know why he keep telling me this even though in my visa card got money. Please help me with this problem

This is incorrect. "There is a billing problem with a previous purchase. Please update you payment method. " means you have made a purchase and iTunes/Apple hasn't received the finds for it yet. hence the "There is a billing problem with a previous purchase. Please update you payment method. ". This means you would need to either use an iTunes gift card to pay it off or another debit or credit card that is currently on the account.

Can't download anything from app store or itunes. everytime i try to install an app i get "there is abilling problem with a previous purchase. please update ur payment method". i have recently changed my address and visa debit card. please help

can't download anything from app store or itunes. everytime i try to install an app i get this error "there is a billing problem with a previous purchase. please update ur payment method". i have recently changed my visa debit card and home adress and when i make these changes i still get the same error.
will u please help me out?

Are you listing the billing address for the card correctly? The address in the iTunes/MAS account must match the address on your bill exactly.

Supplier Sites Interface errors out -- URGENT!! please help.

Hi All,
The log file has the following message when executing the supplier sites interface import program that errored out:
REP-1419: 'beforereport': PL/SQL program aborted.
I have searched Metalink where they said the Batch Size should be 1000 by default. I did the same but still did not work.
I have made sure that teh vendor_id, vendor_site_code, org_id combination is unique.
I am not sure why I am getting this record. I have to process around 300000 records. When I ran the import progam the first time, it errored out after processing 171000 records. Then when I ran the program again for new records(that were not imported) it errored out after processing 42000 records. I dod not know how to resolve this issue.
Please help!!
Swati

Please check if the following notes are applicable to the issue:
Note: 369443.1 - Supplier Sites Open Interface Import Errs With Rep-1419 Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369443.1
Note: 369913.1 - Supplier Open Interface Import (APXSUIMP) Errors: Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369913.1

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Question: Inadvertently a visiting toddler gained access to my computer during a visit. He's obviously fiddled with something as I can no longer use my arrow keys to navigate through my albums or events on iPhoto. Please help!

Question: Inadvertently a visiting toddler gained access to my computer during a visit. He's obviously fiddled with something as I can no longer use my arrow keys to navigate through my albums or events on iPhoto. Only one pic shows up in the album view - I can't see any thumbnails. To see the other pics I have to use the scroll bar on the right hand side of the window. Please help!

Depeding on your version of iPhoto: On the left (iPhoto 11) or right (earlier versions) of the lower frame of the iPhoto Window you'll see a slider. Drag it left.
Regards
TD

A question about class and interface? please help me!

the following is program:
interface A{
public class B implements A{
public static void main(String [] args){
A a = new B();
System.out.println(a.toString());
}i want to ask a question, the method toString() is not belong to interface A, why a can call method toString()? the interface call the method that isn't belong to, why? please help me...

because a.toString() call the method toString() of class Object because B implements A, but extends Object and in the class Object there is a method toString(). infact if you override the method toString() in class B, a.toString() call toString() in class B.
try this:
interface A {}
public class B implements A
public String toString()
    return "B";
public static void main(String [] args)
    A a = new B();
    System.out.println(a.toString());
}by gino

[Urgent] Please help me verify the debug output on E&M interface.

Hello,
    I've got a problem when trying to make a call from the E&M interface on the router to PABX(Panasonic). I've got any dail-tone back. Please help me verify the logging output. It seemed to already send the digits.
###########################debug vpm signal####################
.Sep 20 06:43:43.911: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_1100]em_onhook_offhook htsp_setup_ind
.Sep 20 06:43:43.911: [0/0/0] get_local_station_id calling num= calling name= calling time=09/20 13:43 orig called=
.Sep 20 06:43:43.915: htsp_timer - 3000 msec
.Sep 20 06:43:43.923: htsp_process_event: [0/0/0, EM_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]em_wait_setup_ack_get_ack
.Sep 20 06:43:43.923: htsp_timer_stop interdigit timer cfgd to 3000
.Sep 20 06:43:44.183: htsp_digit_ready: digit = 38
.Sep 20 06:43:44.183: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.443: htsp_digit_ready: digit = 39
.Sep 20 06:43:44.443: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.724: htsp_digit_ready: digit = 30
.Sep 20 06:43:44.724: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.996: htsp_digit_ready: digit = 38
.Sep 20 06:43:44.996: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:45.004: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_PROCEEDING]
.Sep 20 06:43:46.224: htsp_call_bridged invokedhtsp_progress_notify
.Sep 20 06:43:46.228: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]em_offhook_voice_cut
.Sep 20 06:43:51.184: htsp_process_event: [0/0/0, EM_OFFHOOK, E_DSP_SIG_0000]em_offhook_onhook, HF duration=480
.Sep 20 06:43:51.184: mlpp_detection_enabled MLPP is not supported on this interface
.Sep 20 06:43:51.184: em_start_timer: 480 ms
.Sep 20 06:43:51.184: htsp_timer - 480 msec
.Sep 20 06:43:51.664: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_EVENT_TIMER]em_offhook_wait_release_req
.Sep 20 06:43:51.664: htsp_timer_stop
.Sep 20 06:43:51.664: htsp_timer_stop2
.Sep 20 06:43:51.676: htsp_process_event: [0/0/0, EM_RLS_WAIT_RLS_REQ, E_HTSP_RELEASE_REQ]em_wait_rls_release em_onhook (0)
.Sep 20 06:43:51.676: [0/0/0] set signal state = 0x0 timestamp = 0
.Sep 20 06:43:51.676: em_start_timer: 400 ms
.Sep 20 06:43:51.676: htsp_timer - 400 msec
.Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_WAIT_CLR_DONE, E_HTSP_EVENT_TIMER]em_clr_done
.Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_0000]em_onhook_onhook
##########################debug vpip vtsp all####################
.Sep 20 07:02:51.640: //44/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
   Timer Stop Time=23417277
.Sep 20 07:02:51.640: //-1/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
   CDB=0x47575388
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_allocate_cdb:
   CDB=0x47574E08
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_insert_cdb:
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
   [state:INVALID STATE MACHINE, event:E_CC_SETUP_REQ]
.Sep 20 07:02:55.416: htsp_timer_stop3
.Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_og_call_req:
   Echo Cancel=TRUE, Gain Control=0
   Auto Gain Control=FALSE, Dual Tone Detect Mask=0x0, Seq Tone Detect=FALSE
.Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_do_call_setup_req:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PEND, event:E_VTSP_DSM_OPEN_SUCCESS]
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_pend_succ:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
   Mode=0, Peer=2
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
   Target Carrier ID=
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
   Source Carrier ID=htsp_setup_req
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
   Progress Indication=3, Info Trans Capability=16
   Calling Number=, TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed
   Called Number=7744, TON=Unknown, NPI=ISDN
.Sep 20 07:02:55.420: htsp_process_event: [0/0/1, EM_ONHOOK, E_HTSP_SETUP_REQ]em_onhook_setup
.Sep 20 07:02:55.424: em_offhook (0)
.Sep 20 07:02:55.424: [0/0/1] set signal state = 0x8 timestamp = 0
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQUEST, event:E_TSP_PROCEEDING]
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
   Timer Start Time=23417655, Timer Value=10000(ms)
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
   Peer=2, Progress Indication=0, Return Code=2
.Sep 20 07:02:55.424: htsp_process_event: [0/0/1, EM_BRANCH, EM_EVENT_IMMEDIATE]em_branch_immediate
.Sep 20 07:02:55.424: htsp_timer - 300 msec
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_NULL, event:E_VTSP_DSM_OPEN_SUCCESS]
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_wait_pend_success:
   Event=72
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
   Timer Stop Time=23417655
.Sep 20 07:02:55.724: htsp_process_event: [0/0/1, EM_WAIT_DIALOUT_DELAY, E_HTSP_EVENT_TIMER]em_imm_send_digits em_send_digits htsp_dial
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_TSP_DIAL]
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial:
   Digits=7744, Tone Mode=0
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dial:
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
   Digits To Dial=7744
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_dial_done_cb:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_DS_DIALING, event:E_VTSP_DSM_DIALING_COMPLETE]
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_dialing:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
   Digits To Dial=
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial_comp:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:exit@556
.Sep 20 07:02:56.568: htsp_process_event: [0/0/1, EM_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]em_offhook_digit_done
.Sep 20 07:02:56.568: htsp_timer_stop2 htsp_progress
.Sep 20 07:02:56.568: htsp_timer2 - 850 msec
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_TSP_PROGRESS]
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_progress:
   Progress Indication=8, Signal Indication=2, cdb->answer_supervision=0
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_start:
   Timer Start Time=23417770, No Answer Timer Value=180000(ms)
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:
.Sep 20 07:02:56.572: htsp_call_bridged invoked
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:exit@1187
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
   Fax Relay=ENABLED
   Primary Fax Protocol=CISCO_FAX_RELAY, Fallback Fax Protocol=NONE_FAX_RELAY
   Fax Relay CM Suppression :=ENABLED, Fax Parameters Set By=Global Settings
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_fax_feat_param:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
   Save TTY configuration
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
   Set TTY feat parameters
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_CC_DO_CAPS_IND]
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
   Event=E_DSM_CC_CAPS_ACK
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_CC_CAPS_IND]
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
   Event=E_DSM_CC_CALL_MODIFY
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_feature_notify_cb:
   Feature ID=0, Feature Status=1
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:exit@996
.Sep 20 07:02:56.580: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_VOICE_CUT_THROUGH]
.Sep 20 07:02:56.580: htsp_timer_stop2
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_SETUP_REQ_PROC, event:E_CC_DISCONNECT]
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_disconnect:
   Cause Value=16
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_stop:
   Timer Stop Time=23419504
.Sep 20 07:03:13.913: htsp_timer_stop3
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_WAIT_STATS, event:E_VTSP_DSM_STATS_COMPLETE]
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_dsm_dsp_stats_complete:
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
   Timer Start Time=23419505, Timer Value=60000(ms)
.Sep 20 07:03:13.929: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_RELEASE_REQ]em_wait_answer_release
.Sep 20 07:03:13.929: em_stop_timers
.Sep 20 07:03:13.929: htsp_timer_stop
.Sep 20 07:03:13.929: htsp_timer_stop2 em_onhook (0)
.Sep 20 07:03:13.929: [0/0/1] set signal state = 0x0 timestamp = 0
.Sep 20 07:03:13.929: em_start_timer: 400 ms
.Sep 20 07:03:13.929: htsp_timer - 400 msec
.Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_GUARD_ALL, E_HTSP_EVENT_TIMER]em_guard_all_timer
.Sep 20 07:03:14.329: em_stop_timers
.Sep 20 07:03:14.329: htsp_timer_stop
.Sep 20 07:03:14.329: em_start_timer: 3000 ms
.Sep 20 07:03:14.329: htsp_timer - 3000 msec
.Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_PARK, E_DSP_SIG_0000]em_park_onhook
.Sep 20 07:03:14.329: htsp_timer_stop
.Sep 20 07:03:14.329: htsp_timer_stop2 htsp_report_onhook_sig
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_WAIT_RELEASE, event:E_TSP_CALL_FEATURE_IND]
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_call_feature_ind:
   Feature Type=6
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
   [state:S_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF]
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_wrelease_release:
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_play_busy_timer_stop:
   Timer Stop Time=23419546
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
   Timer Stop Time=23419546
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
   Coder Rate=16
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_dsm_closed_cb:
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
   [state:S_CLOSE_DSPRM, event:E_VTSP_DSM_CLOSE_COMPLETE]
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/act_terminate:
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
   Timer Stop Time=23419546
.Sep 20 07:03:14.333: //-1/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
   CDB=0x47574E08
Thanks in advance.
Toshi

EDIT:
            I've not got any dial-tone back from PABX.
Thanks in advance
Toshi

HT2534 I have apple ID with out Visa card but I can't use to Tunis store please help me to open Tunis with out Visa card

I need to download Facebook YouTube and Google search on my screen with all the programs I have apple ID but when I ask to load it say that this apple ID is not known by Tunis store so please I open my ID with out Visa card so as to use Tunis store with out Visa card because I am poor to have Visa card please help me soon!!! Thanks for your kind immediately support !!!!

If you follow, exactly, the instructions on the HT2534 page that you posted from when creating a new account (the instructions won't work with existing accounts) then you will get the 'none' option - I tried it earlier today on both my computer's iTunes and iPhone and I got 'none' for new accounts on both. If you don't use those instructions then credit card details will need to be entered before the account can be used in the store.
using a computer : https://discussions.apple.com/message/24321860
using an iPhone : https://discussions.apple.com/message/24700173
If you want to try using the same email address on a new account then you will need to replace it on that one first e.g. via the Store > View Account menu option on your computer's iTunes or http://appleid.apple.com

Audio Interface not working Please Help

I have been using Logic express with no problems with my Tascam us-122 audio interface , I recently downloaded a program for firefox to be able to capture webpage-video i.e. You-tube etc, and now I cannot get sound out of my interface, even after trying to unistall that program and reinstall my interface driver
Please help, many thanks

Hello,
"and now I cannot get sound out of my interface, even after trying to unistall that program and reinstall my interface driver"
Try using AppZapper: http://www.apple.com/downloads/macosx/systemdiskutilities/appzapper.html
This way you make sure you have UNinstalled all the associated files.
Carolyn

I have a problem in the data entry Visa card please help

I have a problem in the data entry Visa card please help

abdulaziz711 wrote:
I have a problem in the data entry Visa card please help
Is this what you mean...
http://support.apple.com/kb/TS1646
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Please help me interface visa to c8051f320 Mc

Similar Messages

Maybe you are looking for