Please help me resolve the many problems with my airport extreme
Dear Community,
My Apple Airport Extreme has never worked properly out of the box and I do not understand why. I must be doing something wrong. It is replacing a series of Linksys products which integrated with several Linux and Windows machines, and they worked flawlessly.
Problem (1):
Extreme crashes/reboots every now and then, especially when I try to send a lot of data from one machine to another. I assume that I am sending too much data then, and would like to know how I can slow down my data transmission so as to not hurt the Extreme.
Problem (2):
Airport Extreme when restarting either on its own or through the software refuses to let previously connected clients reconnect. The problem is probably because of of Windows XP, Windows Vista, and Linux. This causes major networking issues as each individual machine must have its network layer restarted or be rebooted. So I would like to know what I can do to work around these problems in the operating systems.
Problem (3):
Airport Utility after a spontaneous dropping of all connections by the Extreme is unable to find "any base stations within range" (it is connected to the base station by Ethernet). Base station and computer were both power cycled, problem remains. Perhaps my ethernet cable is too long and this has made the base station "out of range?"
Problem (4):
Apple claimed that I would be able to use a USB 2.0 disk on the Extreme to do backups. When I plug in the USB disk as advertised, the transfer rate is 12% of its transfer rate when plugged into any other hardware. Please let me know which configuration options I need to set on the disk in order to obtain full data transfer rates that will allow me to back up several networked machines in a reasonable timeframe (i.e. less than 3 days).
Problem (5):
Please describe to me how to connect to the router with a web browser. Every other router I have worked with allows me to connect with a web browser, and since the Apple software refuses to connect to the base station I am no longer able to configure it as I do not own a shorter ethernet cable that will bring the base station within range of the computer. Since the apple software does not take any obvious arguments that allow me to specify the IP address of the base station, my only conclusion is that I am supposed to use a web browser which will take an IP address to connect. However, when I do this, I get a "page load error." I am confused, because I was told this is an extreme unit, so I thought it had at least industry standard features, therefore I must be the one doing something wrong.
Your assistance is much appreciated.
Problems 1 through 4 are the topic of many (often long) past discussions in this forum. Though I hate to say it, I have yet to see anything that comes close to a "solution" for the problems you describe. Sometimes, Problem #3 results from radio interference which might be alleviated by changing the default channel the base station transmits on.
Unlike every non-Apple router on the market, Apple's Airport Base Station must be configured using Apple's own "Airport Utility" software application. It is not possible to configure an Airport Base Station using a web browser.
Regrettably, in your case it sounds like you would be better off continuing to use your previous Linksys wireless router.
Similar Messages
-
My iphone keeps freezing, then turning itself off. Please help me resolve the problem whatever it is
My iphone keeps freezing, then turning itself off. Please help me resolve the problem whatever it may be.
You said that you restored it. "forgot to mentioned that ive tried all of that"
When you restore, you can restore from backup or as new.
Did you or did you not restore it?
iPhone User Guide (For iOS 5.0 Software) -
Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer
There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/
-
Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Database get hang please help to resolved the issue.
Hi,
we are getting below error at that time db not allowed user to connect database.please help to resolved the issue.
db version is 10.2.0.3
Errors in file /oracle/oradata/bdump/pmspr_j002_1593486.trc:
ORA-12012: error on auto execute of job 42597
ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j003_1347686.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j004_1995004.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Process OS id : 2064550 alive after kill
Errors in file /oracle/oradata/udump/pmspr_ora_1572972.trc
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j005_1617988.trc:
ORA-12012: error on auto execute of job 42597
ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j007_1523820.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j009_1933354.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j006_1536044.trc:
ORA-12012: error on auto execute of job 42597
ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
ThanksI think the following Oracle two note looks interesting:
Note: 330725.1 Scheduler Job has Been Locked For Days Ora-27468
Note: 731678.1 Scheduled jobs do not run as expected after 10.2 upgrades
HTH -- Mark D Powell -- -
Problems with Bonjour, Airport Extreme and OS 10.4.3
I have a networked, HP Photosmart 8450 printer. The printer was connected to both an iMac 20" and PowerBook G4 15" running OS 10.4.3. Yesterday, I lost the ability to print from the PowerBook. I have identified it as a problem with my Airport Extreme connection.
The iMac can see the printer just fine, and it shows up using Bonjour when I browse printers in the Printer Setup Utility. The PowerBook, however, cannot see the printer - that is, it does not show up in the browser, but only when I use the Airport connection. However, when I connect the printer to the PowerBook via USB, or when I plug a network cable in to the PowerBook, it sees the printer immediately using Bonjour.
It appears, then, the problem is with my Airport Extreme card. Has this issue been identified by anyone else/Apple? Perusing the discussion boards, it seems others have had this problem.
PowerBook G4/iMac Mac OS X (10.4.3)Thanks for the response, however, my question remains: I'm wondering if anyone else with an Airport Extreme ("b" version) and OS 10.4.9 installed has a problem using Admin Utility 4.1.1 and/or Airport Setup Assistant 4.1.1? Specifically, the problem is, after resetting the Airport Extreme, I was able to set it up using the Setup Assistant (establish the network, set the password), but thereafter, it does not show up in the Admin Utility at all (but the Extreme's lights flash as it is being accessed) and in Setup Assistant, it shows up, but there are "errors" when trying to change settings. It is very odd.
When I was running 10.3.9, I had had no problems setting up/administering my Airport Extreme. Suspecting the Extreme itself, I even had an Apple Genius inspect it at the Apple store, but it was pronounced in working order. I might try to check the Airport card inside the G4 (by trying it in a friend's G4). If this communication problem is not shared by anyone else (ii.e., a software issue), it could be my Airport card. -
Problem with my Airport Extreme Base Station (old model)
I have two computers connecting to the internet with an old AEBS via ethernet. One is a Powerbook G4 and the other is a MacBook Pro. Since performing a software update this morning, the older machine stopped being able to connect to the base station wirelessly (the MacBook is fine though). The error message I receive is "There was an error joining Airport network". I am able to connect to other unsecured networks in the area so I don't think there is a problem with my Airport card.
I connected my Powerbook directly to the base station with an ethernet cable. While doing so I was able to access the internet and Airport Setup Utility but once unplugged I was still not able to connect wirelessly.
I have tried restarting the base station both via the utility and by unplugging it. I have also restarted my Powerbook multiple times.
Any suggestions would be greatly appreciated.Sorry, should have asked exactly how old your PowerBook is. Apparently the faster AirPort Extreme card didn't hit the market until early 2003. Find your PowerBook "Specifications" by clicking on that link above in the Apple website menu bar. Picking at random from the list, the 1GHz model released Nov 2002 didn't have an AirPort Extreme card, but only the AirPort card, which means the slower speed 802.11b wireless. The two PB models released in Jan 2003 both were AirPort Extreme models.
You'll be able to use the PB, just open AirPort Admin Utility and change your network "Mode:" selector (at the bottom of the panel) to "802.11b/g Compatible" from 802.11g Only.
Message was edited by: myhighway -
Please help to read the XML document with XMLTable
Hi Gurus,
I am not very familiar with XML parsing. It seems to me it should be very easy to get the data. For some reason, I am having a problem to get the data.
SELECT *
FROM util.hlsr_online_entries e,
XMLTABLE(
xmlnamespaces(
'http://tempuri.org/' as "dt",
'urn:schemas-microsoft-com:xml-diffgram-v1' as "dg"),
'/DataTable/dg:diffgram/DocumentElement/JrShowCustomerHeifers'
PASSING XMLTYPE(e.entry_data)
COLUMNS
SeqNo FOR ORDINALITY,
DocumentID NUMBER PATH 'DocumentID',
ClubName VARCHAR2(100) PATH 'ClubName') as test
WHERE e.ref_id = 33422
The above query does not bring any data for me. My hunts is the problem with DocumentElement tab. I have been trying a different variation to handle.
Please help me out to tune the query
I have the following XML document from the DotNet developer
<?xml version="1.0" encoding="utf-8"?>
<DataTable xmlns="http://tempuri.org/">
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:MainDataTable="JrShowCustomerHeifers" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="JrShowCustomerHeifers">
<xs:complexType>
<xs:sequence>
<xs:element name="DocumentID" type="xs:int" minOccurs="0" />
<xs:element name="ClubName" type="xs:string" minOccurs="0" />
<xs:element name="LastName" type="xs:string" minOccurs="0" />
<xs:element name="FirstName" type="xs:string" minOccurs="0" />
<xs:element name="PreferredName" type="xs:string" minOccurs="0" />
<xs:element name="Email" type="xs:string" minOccurs="0" />
<xs:element name="Exhibitor" type="xs:string" minOccurs="0" />
<xs:element name="AnimalName" type="xs:string" minOccurs="0" />
<xs:element name="RegistryNo" type="xs:string" minOccurs="0" />
<xs:element name="DateofBirth" type="xs:string" minOccurs="0" />
<xs:element name="NameofSire" type="xs:string" minOccurs="0" />
<xs:element name="SireRegistryNo" type="xs:string" minOccurs="0" />
<xs:element name="NameofDam" type="xs:string" minOccurs="0" />
<xs:element name="DamRegistryNo" type="xs:string" minOccurs="0" />
<xs:element name="Tattoo" type="xs:string" minOccurs="0" />
<xs:element name="SecondaryTattoo" type="xs:string" minOccurs="0" />
<xs:element name="UniversalIDNumber" type="xs:string" minOccurs="0" />
<xs:element name="Tattoo_Location" type="xs:string" minOccurs="0" />
<xs:element name="Secondary_Tattoo_Location" type="xs:string" minOccurs="0" />
<xs:element name="OracleBreedID" type="xs:int" minOccurs="0" />
<xs:element name="JrValidationBreedName" type="xs:string" minOccurs="0" />
<xs:element name="ValidationDate" type="xs:dateTime" minOccurs="0" />
<xs:element name="ValidatedBy" type="xs:string" minOccurs="0" />
<xs:element name="ValidationComment" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
<DocumentElement xmlns="">
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers1" msdata:rowOrder="0">
<DocumentID>18442</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>113</AnimalName>
<RegistryNo>C1026447</RegistryNo>
<DateofBirth>01/14/2013</DateofBirth>
<NameofSire>808 GAME DAY 808 LH</NameofSire>
<SireRegistryNo>C961101</SireRegistryNo>
<NameofDam>SADDIE 7/7 LE</NameofDam>
<DamRegistryNo>C941067</DamRegistryNo>
<Tattoo>113</Tattoo>
<SecondaryTattoo />
<UniversalIDNumber>1194F020</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location />
<OracleBreedID>6383</OracleBreedID>
<JrValidationBreedName>Beefmaster</JrValidationBreedName>
<ValidationDate>2014-11-25T08:39:00-06:00</ValidationDate>
<ValidatedBy>laineyb</ValidatedBy>
<ValidationComment />
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers2" msdata:rowOrder="1">
<DocumentID>18473</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>KPH PURPLE CORALEE 349</AnimalName>
<RegistryNo>P43461953</RegistryNo>
<DateofBirth>11/04/2013</DateofBirth>
<NameofSire>PURPLE MOXY 22X ET</NameofSire>
<SireRegistryNo>P43126458</SireRegistryNo>
<NameofDam>TCC CORKY 6603</NameofDam>
<DamRegistryNo>P42457119</DamRegistryNo>
<Tattoo>349</Tattoo>
<SecondaryTattoo>KPH</SecondaryTattoo>
<UniversalIDNumber>1194F021</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location>TATTOO - Right Ear</Secondary_Tattoo_Location>
<OracleBreedID>6389</OracleBreedID>
<JrValidationBreedName>Polled Hereford</JrValidationBreedName>
<ValidationDate>2014-12-01T11:55:00-06:00</ValidationDate>
<ValidatedBy>Hannah</ValidatedBy>
<ValidationComment />
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers3" msdata:rowOrder="2">
<DocumentID>18474</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>LANGFORDS SWEET N SOUR 4107</AnimalName>
<RegistryNo>43504761</RegistryNo>
<DateofBirth>03/02/2014</DateofBirth>
<NameofSire>LH TNT 1017</NameofSire>
<SireRegistryNo>43199794</SireRegistryNo>
<NameofDam>LANGFORDS LADY 2206 ET</NameofDam>
<DamRegistryNo>43315143</DamRegistryNo>
<Tattoo>4107</Tattoo>
<SecondaryTattoo />
<UniversalIDNumber>1194F018</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location />
<OracleBreedID>6398</OracleBreedID>
<JrValidationBreedName>Hereford</JrValidationBreedName>
<ValidationDate>2014-11-24T14:26:00-06:00</ValidationDate>
<ValidatedBy>Validator</ValidatedBy>
<ValidationComment />
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers4" msdata:rowOrder="3">
<DocumentID>18475</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>PURPLE CCC LYDIA 19A</AnimalName>
<RegistryNo>P43406978</RegistryNo>
<DateofBirth>02/05/2013</DateofBirth>
<NameofSire>PURPLE MB WOMANIZER 14UET</NameofSire>
<SireRegistryNo>P42945146</SireRegistryNo>
<NameofDam>PURPLE CMCC NASTIA 9U</NameofDam>
<DamRegistryNo>P42927201</DamRegistryNo>
<Tattoo>19A</Tattoo>
<SecondaryTattoo />
<UniversalIDNumber>1194F017</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location />
<OracleBreedID>6389</OracleBreedID>
<JrValidationBreedName>Polled Hereford</JrValidationBreedName>
<ValidationDate>2014-12-01T11:55:00-06:00</ValidationDate>
<ValidatedBy>Hannah</ValidatedBy>
<ValidationComment />
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers5" msdata:rowOrder="4">
<DocumentID>18477</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>PURPLE SGW EDEN 12B</AnimalName>
<RegistryNo>P43521932</RegistryNo>
<DateofBirth>04/02/2014</DateofBirth>
<NameofSire>RST TIME'S A WASTIN' 0124</NameofSire>
<SireRegistryNo>43123163</SireRegistryNo>
<NameofDam>PURPLE SM WONDER WOMAN 160Y</NameofDam>
<DamRegistryNo>P43235169</DamRegistryNo>
<Tattoo>12B</Tattoo>
<SecondaryTattoo>12B</SecondaryTattoo>
<UniversalIDNumber>1194F015</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location>TATTOO - Right Ear</Secondary_Tattoo_Location>
<OracleBreedID>6389</OracleBreedID>
<JrValidationBreedName>Polled Hereford</JrValidationBreedName>
<ValidationDate>2014-12-01T11:56:00-06:00</ValidationDate>
<ValidatedBy>Hannah</ValidatedBy>
<ValidationComment />
</JrShowCustomerHeifers>
</DocumentElement>
</diffgr:diffgram>
</DataTable>Hi odie_63,
Good evening. I am not sure what you are suggesting. Please provide me the example how to solve the problem. I am very new to XML parsing.
In the meantime, I am having another problem to get the data because .net developer changes the webservice format. To me it is supposed to work fine. May be my eyes are getting blurred so, I can't see where I am wrong.
Thanks in advance. Please help me out.
SELECT exh.docid,exh.clubname,exh.lname,exh.fname,exh.exhibitor,exh.animalname
FROM util.hlsr_online_entries e,
XMLTABLE(
xmlnamespaces(
'http://webservices.hlsr.net/JrShowOracleService/' as "dt",
'urn:schemas-microsoft-com:xml-diffgram-v1' as "dg"),
'/dt:GetJrShowCustomerHeifersResponse/GetJrShowCustomerHeifersResult/dg:diffgram/DocumentElement/JrShowCustomerHeifers'
PASSING XMLTYPE(e.entry_data)
COLUMNS
SeqNo FOR ORDINALITY,
DocID NUMBER PATH 'DocumentID',
ClubName VARCHAR2(100) PATH 'ClubName',
LName VARCHAR2(100) PATH 'LastName',
FName VARCHAR2(100) PATH 'FirstName',
Email VARCHAR2(100) PATH 'Email',
Exhibitor VARCHAR2(100) PATH 'Exhibitor',
AnimalName VARCHAR2(100) PATH 'AnimalName',
RegNo VARCHAR2(100) PATH 'RegistryNo',
DOB VARCHAR2(100) PATH 'DateofBirth',
SireName VARCHAR2(100) PATH 'NameofSire',
SireRegNo VARCHAR2(100) PATH 'SireRegistryNo',
Dam VARCHAR2(100) PATH 'NameofDam',
DamRegNo VARCHAR2(100) PATH 'DamRegistryNo',
Tattoo VARCHAR2(100) PATH 'Tattoo',
SecTattoo VARCHAR2(100) PATH 'SecondaryTattoo',
UnivIDNum VARCHAR2(100) PATH 'UniversalIDNumber',
TattooLoc VARCHAR2(100) PATH 'Tattoo_Location',
OraBreedID NUMBER PATH 'OracleBreedID',
Breed VARCHAR2(100) PATH 'JrValidationBreedName',
ValDate VARCHAR2(100) PATH 'ValidationDate'
) as exh
WHERE e.ref_id = 33432
<GetJrShowCustomerHeifersResponse xmlns="http://webservices.hlsr.net/JrShowOracleService/">
<GetJrShowCustomerHeifersResult>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:MainDataTable="JrShowCustomerHeifers" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="JrShowCustomerHeifers">
<xs:complexType>
<xs:sequence>
<xs:element name="DocumentID" type="xs:int" minOccurs="0"/>
<xs:element name="ClubName" type="xs:string" minOccurs="0"/>
<xs:element name="LastName" type="xs:string" minOccurs="0"/>
<xs:element name="FirstName" type="xs:string" minOccurs="0"/>
<xs:element name="PreferredName" type="xs:string" minOccurs="0"/>
<xs:element name="Email" type="xs:string" minOccurs="0"/>
<xs:element name="Exhibitor" type="xs:string" minOccurs="0"/>
<xs:element name="AnimalName" type="xs:string" minOccurs="0"/>
<xs:element name="RegistryNo" type="xs:string" minOccurs="0"/>
<xs:element name="DateofBirth" type="xs:string" minOccurs="0"/>
<xs:element name="NameofSire" type="xs:string" minOccurs="0"/>
<xs:element name="SireRegistryNo" type="xs:string" minOccurs="0"/>
<xs:element name="NameofDam" type="xs:string" minOccurs="0"/>
<xs:element name="DamRegistryNo" type="xs:string" minOccurs="0"/>
<xs:element name="Tattoo" type="xs:string" minOccurs="0"/>
<xs:element name="SecondaryTattoo" type="xs:string" minOccurs="0"/>
<xs:element name="UniversalIDNumber" type="xs:string" minOccurs="0"/>
<xs:element name="Tattoo_Location" type="xs:string" minOccurs="0"/>
<xs:element name="Secondary_Tattoo_Location" type="xs:string" minOccurs="0"/>
<xs:element name="OracleBreedID" type="xs:int" minOccurs="0"/>
<xs:element name="JrValidationBreedName" type="xs:string" minOccurs="0"/>
<xs:element name="ValidationDate" type="xs:string" minOccurs="0"/>
<xs:element name="ValidatedBy" type="xs:string" minOccurs="0"/>
<xs:element name="ValidationComment" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
<DocumentElement xmlns="">
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers1" msdata:rowOrder="0">
<DocumentID>18442</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>113</AnimalName>
<RegistryNo>C1026447</RegistryNo>
<DateofBirth>01/14/2013</DateofBirth>
<NameofSire>808 GAME DAY 808 LH</NameofSire>
<SireRegistryNo>C961101</SireRegistryNo>
<NameofDam>SADDIE 7/7 LE</NameofDam>
<DamRegistryNo>C941067</DamRegistryNo>
<Tattoo>113</Tattoo>
<SecondaryTattoo/>
<UniversalIDNumber>1194F020</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location/>
<OracleBreedID>6383</OracleBreedID>
<JrValidationBreedName>Beefmaster</JrValidationBreedName>
<ValidationDate>11/25/2014</ValidationDate>
<ValidatedBy>laineyb</ValidatedBy>
<ValidationComment/>
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers2" msdata:rowOrder="1">
<DocumentID>18473</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>KPH PURPLE CORALEE 349</AnimalName>
<RegistryNo>P43461953</RegistryNo>
<DateofBirth>11/04/2013</DateofBirth>
<NameofSire>PURPLE MOXY 22X ET</NameofSire>
<SireRegistryNo>P43126458</SireRegistryNo>
<NameofDam>TCC CORKY 6603</NameofDam>
<DamRegistryNo>P42457119</DamRegistryNo>
<Tattoo>349</Tattoo>
<SecondaryTattoo>KPH</SecondaryTattoo>
<UniversalIDNumber>1194F021</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location>TATTOO - Right Ear</Secondary_Tattoo_Location>
<OracleBreedID>6389</OracleBreedID>
<JrValidationBreedName>Polled Hereford</JrValidationBreedName>
<ValidationDate>12/01/2014</ValidationDate>
<ValidatedBy>Hannah</ValidatedBy>
<ValidationComment/>
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers3" msdata:rowOrder="2">
<DocumentID>18474</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>LANGFORDS SWEET N SOUR 4107</AnimalName>
<RegistryNo>43504761</RegistryNo>
<DateofBirth>03/02/2014</DateofBirth>
<NameofSire>LH TNT 1017</NameofSire>
<SireRegistryNo>43199794</SireRegistryNo>
<NameofDam>LANGFORDS LADY 2206 ET</NameofDam>
<DamRegistryNo>43315143</DamRegistryNo>
<Tattoo>4107</Tattoo>
<SecondaryTattoo/>
<UniversalIDNumber>1194F018</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location/>
<OracleBreedID>6398</OracleBreedID>
<JrValidationBreedName>Hereford</JrValidationBreedName>
<ValidationDate>11/24/2014</ValidationDate>
<ValidatedBy>Validator</ValidatedBy>
<ValidationComment/>
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers4" msdata:rowOrder="3">
<DocumentID>18475</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>PURPLE CCC LYDIA 19A</AnimalName>
<RegistryNo>P43406978</RegistryNo>
<DateofBirth>02/05/2013</DateofBirth>
<NameofSire>PURPLE MB WOMANIZER 14UET</NameofSire>
<SireRegistryNo>P42945146</SireRegistryNo>
<NameofDam>PURPLE CMCC NASTIA 9U</NameofDam>
<DamRegistryNo>P42927201</DamRegistryNo>
<Tattoo>19A</Tattoo>
<SecondaryTattoo/>
<UniversalIDNumber>1194F017</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location/>
<OracleBreedID>6389</OracleBreedID>
<JrValidationBreedName>Polled Hereford</JrValidationBreedName>
<ValidationDate>12/01/2014</ValidationDate>
<ValidatedBy>Hannah</ValidatedBy>
<ValidationComment/>
</JrShowCustomerHeifers>
<JrShowCustomerHeifers diffgr:id="JrShowCustomerHeifers5" msdata:rowOrder="4">
<DocumentID>18477</DocumentID>
<ClubName>Perrin FFA</ClubName>
<LastName>Hamman</LastName>
<FirstName>Kaily</FirstName>
<Email>[email protected]</Email>
<Exhibitor>Hamman, Kaily</Exhibitor>
<AnimalName>PURPLE SGW EDEN 12B</AnimalName>
<RegistryNo>P43521932</RegistryNo>
<DateofBirth>04/02/2014</DateofBirth>
<NameofSire>RST TIME'S A WASTIN' 0124</NameofSire>
<SireRegistryNo>43123163</SireRegistryNo>
<NameofDam>PURPLE SM WONDER WOMAN 160Y</NameofDam>
<DamRegistryNo>P43235169</DamRegistryNo>
<Tattoo>12B</Tattoo>
<SecondaryTattoo>12B</SecondaryTattoo>
<UniversalIDNumber>1194F015</UniversalIDNumber>
<Tattoo_Location>TATTOO - Left Ear</Tattoo_Location>
<Secondary_Tattoo_Location>TATTOO - Right Ear</Secondary_Tattoo_Location>
<OracleBreedID>6389</OracleBreedID>
<JrValidationBreedName>Polled Hereford</JrValidationBreedName>
<ValidationDate>12/01/2014</ValidationDate>
<ValidatedBy>Hannah</ValidatedBy>
<ValidationComment/>
</JrShowCustomerHeifers>
</DocumentElement>
</diffgr:diffgram>
</GetJrShowCustomerHeifersResult>
</GetJrShowCustomerHeifersResponse>
Thanks again. -
How can I resolve the major problems with Lightroom 5 on iMac 5k?
There are many many bugs that have come up in Lightroom 5 on my new iMac 5k (OSX10.10.1 Yosemite) that are seriously challenging my productivity!
A short list of the problems include: Huge slow-downs when navigating in the develop module, very slow and sometimes unresponsive crop tool, improper slider scaling when develop panel in resized (because it is far too narrow on retina screen), poor auto selection of spot removal tool, slow local adjustment brush tool, and overall slow load times of 1:1 previews. My 2011 iMac beats the maxed out 2014 5k iMac in almost every part of the develop module except for initial loading and export times. What the heck is going on?!
These are just some of the problems with LR, there are many more issues with premiere pro and after effects...Well, many of my issues evaporated when i re-installed the most recent update 5.7.1 (by download rather than cc desktop updater). Cropping is finally fast, sliders are ok for scale as long as you don't change panel size while the application in running (if you do you must close and reopen LR for slider scaling to match panel scaling). There are still some issue that I will be reporting on, but will make do for now.
This was a major retina 5k iMac compatibility update, even though its not really mentioned in the list of fixes -
How can i resolve the wifi problem with iphone 4s?
please help me, i update my iphone to ios 6.1 beta 5 but the wifi problem continues!
Why don't you try some basic troubleshooting instead of ranting about how someone else should solve a problem that's specific to YOUR phone.
-
PLEASE HELP!!!! Problem with my Huion H610n drawing tablet!!!
I recently purchased a drawing tablet which is the Huion H610N its working perfectly however when I opened photoshop cc I tried drawing in a blank canvas and Its not showing anything. I tried using the 'basic brushes' instead of my 'custom brushes' and it lets me draw and I can see it however the sensitivity is not showing when I draw using the 'basic brushes' the lines are just plain BOLD please help! I dont know why its doing this!
Try accessing the *System Preference* panel, named *Universal Access*;
then, note the choices within it include Mouse (among other) and click
on the Mouse section to check and see if _+the slider control+_ to change
the Size of the *Cursor icon* has been moved over to make it larger.
You can check/change several settings in Universal Access; also some
of these have keyboard shortcuts which may be engaged by a user,
by accident due to random use of a keyboard. Be aware of this, since
a pattern of changes when children use a computer may repeat; as
similar keyboard mistakes (or intentional odd results) use similar keys.
There are symbols representing keys used to engage Universal Access;
their icons in this control panel area of System Preferences should be-
come familiar to you, so when/if other odd visuals occur, check here.
Notice what the 'default' settings are, in the different U.A. panel areas.
This will help when you find another issue arise; a repeat is likely.
You may choose to set up a different user account in the Mac then have
it not allow full access to more than a few basic necessities, for a child.
+PS: Hello, and welcome to Apple Support Discussion Communities!+
Good luck & happy computing!
+{ edited }+ -
Problems with new airport extreme
i'm a network admin who has dealt with seemingly every network problem imaginable over the last 15 years, but this one has me stumped. really hoping someone can help me see the forest for the trees on this one.
the problem started last week when i decided to upgrade to the latest airport extreme - replacing my MB763LL/A. In my previous setup I also had an Airport Express on the network that I was using for the 18th stereo jack connected to a stero. the airport express has been unplugged and while it'd be nice to have it working again, i'm not terribly concerned about it at this point.
the extreme has two devices plugged directly into it - an iMac and a sony blu-ray and they both work great.
the wireless is where the problem exists. i thought originally this was the same old 2.4ghz/5.0ghz issue with 802.11n and iPhones, but that doesn't seem to be the case - or i am just really missing something in regards to it.
currently the airport extreme is setup as follows:
- create wireless network
- allow this network to be extrended is NOT checked
- radio mode: 802.11n only (5ghz) - 802.11b/g
- wireless security: WPA2 Personal
- seperate 5Ghz network name is specified under wireless network options.
- currently i have a guest network setup with no security (more to come on this later)
i have an iPad that connects to the 5Ghz wifi and works great and likewise an older dell laptop and a wireless security camera (both 802.11g) work great.
the problem is my wife's iphone (3gs) and mine (iphone4). if i connect them to the unsecured guest network they work great. unfortunately this is a bit of a pain as we use airplay and some other pieces regularly. when i connect to the WPA2 network it will connect, work fine for a couple minutes and then i start receiving timeouts to both the internet as well as anything else on my network. one interesting thing i've noticed is in the airport utility you can see them connect in the wireless client screen, but over the few minutes the rate will fall from 54 down to 1.
i've gone as far as completely restoring the phones to factory original state and reconfigured them manually - skipping the option to restore previous backups.
i've tried various options for the radio mode and this problem persists. my understanding is that in the current mode the iphones won't see the 802.11n since it's a separate 5Ghz SSID and therefore connect via 802.11g. I've tried WPA/WPA2 for the security and that doesn't seem to matter either.
is it possible this airport extreme is a dud? any other suggetions? please let me know if i ommited and details.
any help is REALLY appreciate.I seem to have the same problem you had. iPad, MacBook Air, and iTouch all connect to my airport extreme without an issue all the time. But my wife's iPhone 4s and now my Kindle Fire can't connect except once in a blue moon. Sometimes they see the network, sometimes they don't even if I am right beside the base station. I did the upgrade and things worked for about a day but now the same issue. Am configured like you but found disabling security doesn't guarantee reliable connections either. Very frustrated!!
-
PROBLEM with new Airport Extreme
i just bought the new airport extreme and what was supposed to be a simple setup process has taken longer than 10 hours!
please help!
i have 3 computers.
2 are macs, they will be using wireless. 1 is a PC, which will be wired to the airport extreme.
the airport extreme is connected to a VOIP router, which is then connected to the DSL router.
i have always used my old airport extreme without issues, but because i want to connect the PC as well, i must ditch the airport express in favour for one with LAN ports. hence, the troublesome airport extreme.
it doesn't work.
none of my computers can recognize the new network. (even though i've established one, with passwords and everything)
the router flashes amber - internet works, but not wireless.
the router periodically flashes green - ironically, nothing works then!!!!
please help!!!
EDIT: DIAGRAM
1. WHEN IT WORKED:
INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXPRESS --> MAC 1, MAC 2 (WIRELESS)
2. WHEN IT DOESN'T WORK:
INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXTREME --> MAC 1, MAC 2 (WIRELESS), PC (WIRED)It appears to me that you may possibly have sever conflict issues as well as maybe not having the Network confiqured correctly.
I have a 3 story OLD VICTORIAN and I am using the Old Airport Extreme Base and have expierianced NO PROBLEMS at all.
If I may suggest a different approach.
Try to start from scratch.
SHUT EVERYTHING OFF.
Run an ethernet cable from your Internet Service Providers MODEM to the WAN port of the Airport Extreme Base
Set it up DHCP and you want the Airport to distribute IP's
use the Airport setup assistant and Airport Admin Utility.
Using 2 Routers in the mix unless you have ony one the main to distribute the IP's, IF you have 2 Routers and they are both set up to distribute the IP's there is your problem.
The New Airport Extreme Base is far better then the older model and you shouldn't need another router in the mix at all to get the coverage of your entire house.
Take the Netgear clear out and use the Airport Extreme and the Expresses as you had them before. There is a very good possibility that you will need to do evrything one at a time and step by step.
Do not just plug everything in, and turn everything on and expect it to work. Do everthing step by step with all security disabled to begin with.
Be sure when you do your system reset that you start by powering up the MODEM 1st and wait for it to acquire the signal before you power up the Airport Extreme and again you must wait for it to acquire the signal. You can use the LAN Ports for anyyhing you need HARDWIRED. If you don't wait and do things in the proper order you will have problems, I can't stress enough that it must be done in the proper sequence. Have a look at the Paperwork of either the Netgear's Yellow Phamplet or the Booklet that came with the Extreme to bear out what I explained on the sequence.
Don -
Urgent Problems with my Airport Extreme
I purchased a latest airport extreme recently. Works perfect for several weeks.
Suddenly, from yesterday, the Internet speed where slightly distant from Airport becomes very slow which usually do very well. I just had to get to very close to the Airport to get the Internet speed. So I decided to factory reset the Airport. Works well until last step. The airport utility shows unexpected error when I finished configuration.
Right now, the airport shows green light but I cannot find it on any device or any airport utility!!!
Need help!!!I will assume that you have already tried different Ethernet patch cables and tried this on all of your 802.11n AirPort Extreme Base Station's (AEBSn) LAN ports and the problem continued ... correct?
If so, the problem may be the MTU setting on both of your Macs. The AEBSn, with Gigabit Ethernet, uses a Broadcom controller chip that supports Jumbo Frames. By default, both of your Macs should sense the type of Ethernet connection they have, but typically default the MTU to a "safe" 1500 byte value. Any value above this would be considered "Jumbo" and the controller chip in the AEBSn can support Jumbo Frames up to 9728 bytes.
I would recommend that you try changing the MTU value on both Macs to "Jumbo (9000)" to see if this will help.
To do so:
System Preferences > Network > Ethernet > Advanced > Ethernet tab
Configure: Manually
Speed: 1000baseT
Duplex: full-duplex, flow-control
MTU: Jumbo (9000)
Be sure to do this on both Macs, and then, try to copy at least a single 1 GB file between them, either direction. To quickly create this file, just use the Disk Utility to create a 1 GB disk image.
Please post back your results. -
Internet problem with New Airport Extreme base and new Macbook Pro
So I bought a Airport Extreme base station with my new Macbook pro.
My desktop system uses a DSL modem which is connected to my computer via an ethernet cable. It works flawless. I can also unhook the hard ethernet connection from the desktop and connect it to the Macbook Pro with no problems.
I then connected the ethernet cable from the DSL router to the WAN port on the Airport Base.
I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
Thanks,
DannyI have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Make sure you perform a complete power recycle when switching network components.
Modem/Router Power ReCycling
- Power-off the DSL modem & AEBS. (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
If that doesn't resolve the problem, and your DSL ISP requires PPPoE for connectivity, you will need to set that up on your AirPort Extreme Base Station (AEBS) as follows:
Connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
No, the AEBS will no longer be required.
Maybe you are looking for
-
epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes
-
I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library,
-
Setting different vibrations for contacts is not working in iOS 7. Thoughts?
Setting a different vibration alert for a variety of contacts "appears" to be working; the settings are accepted and visible, however, when an incoming text arrives, they all vibe the same - not differentiated. <shrug>. Using iphone 4S / iOS7
-
HT4946 Yesterday I brought home my new iPhone 5! Love it. Backup-Restore problem
Yesterday I brought home my new iPhone 5! Love it. Problem is I cannot put the stored information, that I backed up on iTunes from my iPhone 4S, onto the iPhone 5. I continue to get a message that the file is corrupt, or won't sync with the new de
-
I bought photoelements 7 a few years ago, now I want to use and can not. i don't want to upgrade
I purchased Photo elements 7 a few years ago and it is sufficient for my needs. but now i can not get into the program, I have account number and password. i am not interested in upgrading to version 12