Please help - My iPod freezes after playing an mp4 movie

Hi all!
I've converted some dvd movies to mp4 using Avex DVD converter. However, after I watch one of these movies, my iPod freezes, and I have to reset it.
Any ideas why this is happening?
Thanks!
-K

.m4v, .mp4 and .mov file formats are recognized formats. There could be a problem with the conversion.
You could try another converter.
http://www.squared5.com/svideo/mpeg-streamclip-win.html

Similar Messages

  • Please help my ipod nano wont play my playlist

    Someone please help!! i just got my ipod nano for christmas in `07 and my XP wouldnt recognize my ipod. So i downloaded songs that i already had on my XP to a CD and put thoose on my brothers computer which did recognize my ipod. Then i added the playlist to my ipod and when i tried selecting my ipod nothing happened. Please help!!! i really want to be able to listen to my ipod.

    Did you use iTunes to load the music? If you didn't, you need to.

  • My ipod freezes after playing a few songs.

    Playing it through an ipod stereo.  I hard restart it and it works fine again for a little while, but after 30 minutes or so it freezes again.  Any thoughts?

    Try here >   Apple - Support - iPod Troubleshooting Assistant

  • Please Help! iPod won't play videos anymore!

    I've had my 5th generation iPod for a year now and for the last 3 months I have not been able to get my videos to play. I have DVD's that I've burned as well as movies that I've downloaded. At first, only one or two wouldn't play and now I am down to only 1, out of about 20 videos that will still work.
    When I try to play a video I get a black screen. I can adjust the volume and see that the video is there, but the elapsed time just stays frozen at 00:00. The only way to recover the iPod after this is to reset it by holding down the menu and select buttons. I've checked that the TV out is off and tried everything else that I can figure out to try. I have even restored the iPod and reloaded all of the content. Still, only that one video will play and all the others lock up the iPod. I've tried re-downloading the videos and ripping the DVD's again. I also tried adding new videos. The iPod syncs and the videos upload fine but when I try to play them… no luck.
    Anyone else have this same problem? It's driving me crazy. Ready to go buy a Zune.

    Hello,
    Only i could say, that i have the same problem with my 30Gb iPod during the last two or three months. Just after syncing my iPod i was not able to see any video. In the beginning one restart of the device was helpful and video started playing as usual. Now does not help anything: either multiple restarts of the iPod, or restoring all settings via iTunes.
    Since i have encountered this problem, i have not found any answer.

  • Please Help! - MBP freezing after EFI 2.2 firmware update

    Hey guys. I'm hoping someone understands whats happening with my 2011 13" MBP (corei5, 4gb ram, 750 gig HDD)
    I updated the computer with EFI Firmware 2.2 and the most recent security update a few days ago.
    My computer will boot to my username fine.
    It immediately begins INDEXING (***!?) even though that obviously isn't needed.
    My HDD spins like crazy and I notice in activity monitor 3 things: Finder and MDWorker will user over 100% of my CPU, my RAM is completely used down to 3MB free, and my hard drive free space is going down slowly as i leave the computer on.
    Nothing will open, constant beach balls, the longer I leave the comp on the worse it gets.
    My fans will run on high to cool down the computer which is obviously working very hard.
    I have tried re-installing EFI 2.2 (didn't work), I have tried going back to 2.1 but Lion says its not compatible.
    I have re-set the PRAM, no luck.
    I have repaired disk permissions, no luck.
    The Guest account boots up fine
    The HDD is fine because it boots up in the same time as always and runs guest account fine, and my account for the first minute or two fine.
    Does anyone know WHAT IS GOING ON HERE? It's driving me nuts. Thanks for your help in advance.
    Dan

    My 2011 17" MacBook Pro was freezing up to 20 or more times a day after I installed the 2.2 firmware.  I created a new user account and even new partitions with 10.6.8 and 10.7.1 installed and they all would freeze with no other software installed.  I reset the SMC and PRAM.  Repaired the permissions and disk.  Nothing helped.
    Today I took it to the local Apple store (100 miles away lol) and of course they couldn't reproduce the problem in the limited time they had but they gave me a new machine so I can get back to work.  I'm still restoring from a backup so I have no idea how it will run but so far it's behaving and it is running from a CCC version of the drive that was in my old laptop and it has been solid.
    The lesson I learned is that I am going to update to 2.1 and skip the 2.2 firmware.
    BTW - Props to Alex @ the Apple store for all his help.

  • Help! Lightroom freezes after installing.

    I get this message after trying to create or open a catalog: "An error occured when attemting to change modules." Then Lightroom freezes.
    I work on a Mac and have formatted and reinstalled my systemdisk with a qlean install. I had Lightroom installed and have used it for some years. But when installing the programs again I went for the Creative Cloud solution. When I tried to open my previous catalog I got this error message. And after several deinstallings and reinstallings I still get the same message and Lightroom freezes.
    Anyone who can help?

    Hi Ian.
    Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
    Best wishes,
    Magne
    6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
    Re: Help! Lightroom freezes after installing.
    created by Ian Lyons in Photoshop Lightroom - View the full discussion
    Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • IPod freezes after updating to software version 1.2!!!

    iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
    like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

    Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

  • All songs missing from my iPod Video after playing movies

    hi there,
    can some one help me, why everytime after playing my movies, all the songs that i have downloaded into the iPod is missing!
    Where am I did wrong?
    Thanks in Advance!
    cheers

    Try restoring your iPod, this will erase the hard drive, reload the software and put it back to default settings so make sure you have everything backed up. Once the restore is complete it should connect to iTunes and you can begin updating your library onto the fresh installation: Restoring iPod to Factory Settings

  • IPod freezes after connecting to PC/iTunes

    I think it's a common problem that iPods freeze after plugging in the USB cable. I don't know if it's working for others, but if i do a reset (hold menu plus select) on the iPod while it is plugged and iTunes is running it works. But i have to do this every time i plug it in... So much to years of software development...

    "All of my songs that were numbered or had numbers in the title are not at the bottom of the songs list instead of being the first songs listed."
    I assume you meant to say "now" at the bottom of the list?
    Unfortunately, like it or not this how the latest version of iTunes sorts songs. Numbers now appear at the end of the listings.

  • Please Help , I Need semicolon ; after TABLESPACE "MFEED_DATA"

    Hi All,
    please Help , I Need semicolon ; after TABLESPACE "MFEED_DATA"
    as I am getting ; like below example
    select dbms_metadata.get_ddl('TABLE', 'A') || ';' As Result
    from dual;
    CREATE TABLE "MFEED"."A"
    (     "A" NUMBER
    ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "MFEED_DATA"
    regards,

    Hi,
    well, I don´t know if this works for any table, but I tried two of mine and it was ok:
    select substr(dbms_metadata.get_ddl('TABLE', '<table_name>'), 1,
    length(dbms_metadata.get_ddl('TABLE', '<table_name>') || ';')-4)|| ';' As Result
    from dual;
    If the string gets too long, you must use dbms_lob - functions for string manipulation, but for "normally sized" tables, it should work.
    Regards,
    Gerd
    Message was edited by: Gerd
    OK, Jens has the perfect solution - forget mine!
    gerd_99

  • Please help my ipod disconnected from the Internet and wont reconnect and i did the right password

    please help my ipod disconnected from the Internet and wont reconnect and i did the right password

    - Do other devices still connect to the network?
    - Does the iPod connect to other networks?
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • Freezes after playing video playlist

    My 60G freezes after playing my video playlist. I have to wait until the battery runs down then plug it in to reboot it for it to work again. I took it back to Best Buy where I purchased it, and they installed the latest update. They claimed this would fix the problem. Wrong! Any suggestions?
    Thanks!

    There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
    If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing.  However, you may find that on different PCs with different system specs the video may take slightly more or less time to play.

  • Can a one please help me turn off auto play for Facebook the option is no longer in my  General settings  why is this ?

    Can a one please help me turn off auto play for Facebook the option is no longer in my  General settings  why is this ?

    And yet the link you posted only tells you how to do it on the Facebook App for Android. Nothing about the Facebook page is mentioned at all, or how to do it on an iPhone.
    With that said, and assuming you have the most up to date version of the Facebook App, you can now turn the auto play feature Off within the Facebook App itself.  Tap on the "More" icon on the bottom right, then scroll down to Settings->Videos and Photos->Auto Play. If Smart auto-Play is on turn it off. Then you can set the check mark on "Never Play Videos Automatically" which is the same as Off.

  • Please help: Why JMF does't play .avi video clip?

    The player doesn't play .avi media file, or plays sound only, but it works fine when palying .mpg files, anything I need to pay attention to when using the following code to generate a player to play video clips?
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    import javax.swing.*;
    import javax.media.*;
    public class PlayClip extends JFrame {
    //singliton design pattern
    private static PlayClip instance;
    protected Player player;
    private File file= new File ("goal.avi");
    private PlayClip () {
    instance=null;
    initComponents();
    public static PlayClip getInstance(){
    if (instance==null)
    instance=new PlayClip ();
    return instance;
    private void initComponents() {
    JButton OK = new JButton ("OK");
    OK.addActionListener (
    new ActionListener () {
    public void actionPerformed (ActionEvent e) {
    player.close ();
    instance = null;
    dispose();
    getContentPane ().add (OK, BorderLayout.NORTH);
    setSize (300, 300);
    show ();
    createPlayer ();
    /** Creates new form PlayClip */
    private void createPlayer () {
    if (file == null) {
    return;
    removePreviousPlayer ();
    try {
    //create a new player and add listener
    player = Manager.createPlayer (file.toURL () );
    player.addControllerListener (new EventHandler () );
    player.start (); //start player
    catch (Exception e) {
    JOptionPane.showMessageDialog (this, "Invalid file or location", "Error loading file", JOptionPane.ERROR_MESSAGE );
    System.exit (1);
    private void removePreviousPlayer () {
    if (player == null )
    return;
    player.close ();
    Component visual = player.getVisualComponent ();
    Component control = player.getControlPanelComponent ();
    Container c = getContentPane ();
    if (visual != null)
    c.remove (visual);
    if (control !=null)
    c.remove (control);
    private class EventHandler implements ControllerListener {
    public void controllerUpdate (ControllerEvent e) {
    if (e instanceof RealizeCompleteEvent ) {
    Container c = getContentPane ();
    Component visualComponent = player.getVisualComponent ();
    if (visualComponent != null)
    c.add (visualComponent, BorderLayout.CENTER);
    Component controlsComponent = player.getControlPanelComponent ();
    if (controlsComponent != null)
    c.add (controlsComponent, BorderLayout.SOUTH);
    c.doLayout ();
    }

    JDunlop,
    thanks for your quick reply to my java.sun.com forum posting! i just got back from vacation, so i didn't get a chance to try your method til now. i pulled your email address off the website to update you on my problem playing an avi file in JMStudio (JMF).
    as per your instructions, i downloaded the divx player at www.divx.com and tried to play the avi file. this is the error the divx player gives:
    Divx Player 2.1
    The file contains unknown video data
    The file contains the following type of data:
    Video data: FOURCC code "MP42"
    You may need to install a new video codec on your computer to watch this video
    Some quick questions:
    1. Where could I find the "MP42" codec to play my avi file in JMStudio (JMF)? Does java.sun.com have video codecs?
    2. You mentioned in your posting "If you don't have the one that was used in the encoding, your out of luck." Does this mean that I need to know how the avi file was originally coded and have the original codec to decode (play) it?
    Thanks,
    lac410
    P.S. If you need more Duke Dollars for your help, I'd be happy to award them to you.
    Re: Please help: Why JMF does't play .avi video clip?
    Author: JDunlop Jun 5, 2003 5:00 AM
    sounds to me like you are missing a video codecs. If you don't have the one that was used in the encoding, your out of luck. Download the player from divx.com, it will tell you which codecs the video needs (if it won't play). You can then search the net for that particular codecs.

  • When I import a video I recorded to my laptop from my Iphone 5c  it won't play on window media centre or vec or any medium. Please help??? It plays perfect on the phone.

    When I import a video I recorded to my laptop from my Iphone 5c  it won't play on window media centre or vec or any medium. Please help??? It plays perfect on the phone.

    The format from the phone is :
    h.264 encoded video, AAC audio. Both standards of MPEG 4.
    You need Windows Media Player version 12 or above to play MP4 (or add the codecs to your current version).

Maybe you are looking for