Please HELP! Netstat Results
Hello everyone! I hope someone could help me with this netstat results, I can tell you for a fact that I'm not wildguessing about my connection being listened.
Here's what I got:
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 0 192.168.1.35.51681 vb-in-f100.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51677 www-slb-11-02-as.http ESTABLISHED
tcp4 0 0 192.168.1.35.51675 168.143.242.209.http ESTABLISHED
tcp4 0 0 192.168.1.35.51671 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51670 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51669 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51604 channel3-02-01-s.http ESTABLISHED
tcp4 0 0 192.168.1.35.51597 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51596 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51595 client-200.60.13.http CLOSE_WAIT
tcp4 0 0 192.168.1.35.51594 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51593 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51592 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51590 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51589 vb-in-f101.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51588 vb-in-f95.1e100..http ESTABLISHED
tcp4 0 0 192.168.1.35.51582 vb-in-f93.1e100..http ESTABLISHED
tcp4 0 0 192.168.1.35.51581 vb-in-f100.1e100.https ESTABLISHED
tcp4 0 0 192.168.1.35.51573 vb-in-f102.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51572 vb-in-f102.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51571 vb-in-f102.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51550 vb-in-f95.1e100..http ESTABLISHED
tcp4 0 0 192.168.1.35.51549 squarespace.com.http ESTABLISHED
tcp4 0 0 192.168.1.35.51548 squarespace.com.http ESTABLISHED
tcp4 0 0 192.168.1.35.51547 squarespace.com.http ESTABLISHED
tcp4 0 0 192.168.1.35.51546 squarespace.com.http ESTABLISHED
tcp4 0 0 192.168.1.35.51545 squarespace.com.http ESTABLISHED
tcp4 0 0 192.168.1.35.51544 squarespace.com.http ESTABLISHED
tcp4 0 0 192.168.1.35.51512 lpp01m01-in-f120.http ESTABLISHED
tcp4 0 0 192.168.1.35.51511 vb-in-f100.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51483 s3-1.amazonaws.c.http ESTABLISHED
tcp4 0 0 192.168.1.35.51474 a184-28-181-55.d.http ESTABLISHED
tcp4 0 0 192.168.1.35.51463 client-200.60.13.http ESTABLISHED
tcp4 0 0 192.168.1.35.51417 a23-15-8-89.depl.http ESTABLISHED
tcp4 0 0 192.168.1.35.51415 168.143.242.243.http ESTABLISHED
tcp4 0 0 192.168.1.35.51414 168.143.242.227.http ESTABLISHED
tcp4 0 0 192.168.1.35.51413 168.143.242.227.http ESTABLISHED
tcp4 0 0 192.168.1.35.51412 168.143.242.227.http ESTABLISHED
tcp4 0 0 192.168.1.35.51410 168.143.242.227.http ESTABLISHED
tcp4 0 0 192.168.1.35.51404 s3-1-w.amazonaws.http ESTABLISHED
tcp4 0 0 192.168.1.35.51402 s3-1-w.amazonaws.http ESTABLISHED
tcp4 0 0 192.168.1.35.51395 vb-in-f139.1e100.https ESTABLISHED
tcp4 0 0 192.168.1.35.51387 s3-1-w.amazonaws.http ESTABLISHED
tcp4 0 0 192.168.1.35.51306 vb-in-f155.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51283 vb-in-f148.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51282 vb-in-f148.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.51261 vb-in-f100.1e100.http ESTABLISHED
tcp4 0 0 192.168.1.35.50664 www-12-03-frc1.f.http ESTABLISHED
tcp4 0 0 192.168.1.35.50515 client-200.60.19.http ESTABLISHED
tcp4 0 0 192.168.1.35.50484 www-11-03-frc1.f.http ESTABLISHED
tcp4 0 0 *.3828 *.* LISTEN
tcp4 0 0 localhost.ipp *.* LISTEN
tcp6 0 0 localhost.ipp *.* LISTEN
udp4 0 0 *.rockwell-csp3 *.*
udp4 0 0 192.168.1.35.ntp *.*
udp6 0 0 fe80::129a:ddff:.ntp *.*
udp4 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 *.ntp *.*
udp4 0 0 *.ntp *.*
udp6 0 0 *.59429 *.*
udp4 0 0 *.59429 *.*
udp6 0 0 *.53724 *.*
udp4 0 0 *.53724 *.*
udp6 0 0 *.49597 *.*
udp4 0 0 *.49597 *.*
udp6 0 0 *.55506 *.*
udp4 0 0 *.55506 *.*
udp6 0 0 *.60628 *.*
udp4 0 0 *.60628 *.*
udp6 0 0 *.65311 *.*
udp4 0 0 *.65311 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp6 0 0 *.mdns *.*
udp4 0 0 *.mdns *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
568c880 stream 0 0 0 568c910 0 0 /var/run/mDNSResponder
568c910 stream 0 0 0 568c880 0 0
5db5bd0 stream 0 0 0 568b170 0 0
568b170 stream 0 0 0 5db5bd0 0 0
5db6560 stream 0 0 0 5db5b40 0 0
5db5b40 stream 0 0 0 5db6560 0 0
568aea0 stream 0 0 0 5db6d40 0 0
5db6d40 stream 0 0 0 568aea0 0 0
5db65f0 stream 0 0 0 5db67a0 0 0
5db67a0 stream 0 0 0 5db65f0 0 0
568b290 stream 0 0 0 5db6cb0 0 0 /var/run/mDNSResponder
5db6cb0 stream 0 0 0 568b290 0 0
568ba70 stream 0 0 0 5db6830 0 0 /var/tmp/launchd/sock
5db6830 stream 0 0 0 568ba70 0 0
5db7e20 stream 0 0 0 568b0e0 0 0 /var/run/mDNSResponder
568b0e0 stream 0 0 0 5db7e20 0 0
568a480 stream 0 0 0 568bd40 0 0 /var/run/mDNSResponder
568bd40 stream 0 0 0 568a480 0 0
5db6290 stream 0 0 0 5db6b90 0 0 /var/run/mDNSResponder
5db6b90 stream 0 0 0 5db6290 0 0
5db68c0 stream 0 0 0 568b950 0 0 /var/run/mDNSResponder
568b950 stream 0 0 0 5db68c0 0 0
5db6b00 stream 0 0 68379d4 0 0 0 /tmp/icssuis501
568a5a0 stream 0 0 0 5db69e0 0 0 /var/run/mDNSResponder
5db69e0 stream 0 0 0 568a5a0 0 0
5db63b0 stream 0 0 0 5db6680 0 0
5db6680 stream 0 0 0 5db63b0 0 0
568a360 stream 0 0 0 568a120 0 0 /var/run/mDNSResponder
568a120 stream 0 0 0 568a360 0 0
5db7b50 stream 0 0 0 5db7c70 0 0 /var/run/mDNSResponder
5db7c70 stream 0 0 0 5db7b50 0 0
568b560 stream 0 0 0 5db7910 0 0
5db7910 stream 0 0 0 568b560 0 0
568b7a0 stream 0 0 0 568b830 0 0
568b830 stream 0 0 0 568b7a0 0 0
568ac60 stream 0 0 0 568b200 0 0
568b200 stream 0 0 0 568ac60 0 0
5db76d0 stream 0 0 0 5db7490 0 0
5db7490 stream 0 0 0 5db76d0 0 0
5db77f0 stream 0 0 6853ea4 0 0 0 /tmp/launch-4UTHm5/org.x:0
5db7d00 stream 0 0 6837000 0 0 0 /tmp/launch-molo5O/Listeners
568aab0 stream 0 0 6837128 0 0 0 /tmp/launch-qf1Q8b/Render
5db7760 stream 0 0 6837534 0 0 0 /tmp/launchd-89.LmTfvt/sock
5db7010 stream 0 0 0 568ab40 0 0
568ab40 stream 0 0 0 5db7010 0 0
5db7520 stream 0 0 0 568a6c0 0 0
568a6c0 stream 0 0 0 5db7520 0 0
5db6e60 stream 0 0 0 568a510 0 0
568a510 stream 0 0 0 5db6e60 0 0
568a090 stream 0 0 0 5db7be0 0 0
5db7be0 stream 0 0 0 568a090 0 0
568ae10 stream 0 0 0 5db6f80 0 0 /var/run/mDNSResponder
5db6f80 stream 0 0 0 568ae10 0 0
568acf0 stream 0 0 0 568ad80 0 0
568ad80 stream 0 0 0 568acf0 0 0
568b8c0 stream 0 0 0 568a630 0 0
568a630 stream 0 0 0 568b8c0 0 0
5db7f40 stream 0 0 0 568a000 0 0
568a000 stream 0 0 0 5db7f40 0 0
568a1b0 stream 0 0 0 568a240 0 0
568a240 stream 0 0 0 568a1b0 0 0
568a750 stream 0 0 0 568a7e0 0 0
568a7e0 stream 0 0 0 568a750 0 0
568a990 stream 0 0 0 568aa20 0 0
568aa20 stream 0 0 0 568a990 0 0
568af30 stream 0 0 0 568afc0 0 0
568afc0 stream 0 0 0 568af30 0 0
568b3b0 stream 0 0 0 568b440 0 0
568b440 stream 0 0 0 568b3b0 0 0
568bb90 stream 0 0 5b60534 0 0 0 /var/run/pppconfd
568bcb0 stream 0 0 0 568bdd0 0 0
568bdd0 stream 0 0 0 568bcb0 0 0
568be60 stream 0 0 0 568bef0 0 0
568bef0 stream 0 0 0 568be60 0 0
568c010 stream 0 0 0 568bf80 0 0 /var/tmp/launchd/sock
568bf80 stream 0 0 0 568c010 0 0
568c0a0 stream 0 0 0 568c130 0 0
568c130 stream 0 0 0 568c0a0 0 0
568c250 stream 0 0 0 568c1c0 0 0 /var/tmp/launchd/sock
568c1c0 stream 0 0 0 568c250 0 0
568c370 stream 0 0 0 568c2e0 0 0
568c2e0 stream 0 0 0 568c370 0 0
568c490 stream 0 0 0 568c400 0 0
568c400 stream 0 0 0 568c490 0 0
568c5b0 stream 0 0 0 568c520 0 0
568c520 stream 0 0 0 568c5b0 0 0
568c6d0 stream 0 0 0 568c640 0 0
568c640 stream 0 0 0 568c6d0 0 0
568c760 stream 0 0 0 568c7f0 0 0
568c7f0 stream 0 0 0 568c760 0 0
568c9a0 stream 0 0 5942534 0 0 0 /var/tmp/launchd/sock
568ca30 stream 0 0 594265c 0 0 0 /private/var/run/cupsd
568cac0 stream 0 0 5942818 0 0 0 /var/run/usbmuxd
568cbe0 stream 0 0 5942940 0 0 0 /var/run/asl_input
568cc70 stream 0 0 59429d4 0 0 0 /var/run/SCHelper
568cd00 stream 0 0 5942a68 0 0 0 /var/run/vpncontrol.sock
568cd90 stream 0 0 5942afc 0 0 0 /private/var/run/printtool
568ce20 stream 0 0 5942b90 0 0 0 /var/run/portmap.socket
568cf40 stream 0 0 5942c24 0 0 0 /var/run/mDNSResponder
568ceb0 stream 0 0 5942cb8 0 0 0 /var/run/com.apple.ActivityMonitor.socket
568a900 dgram 0 0 0 5db7370 5db7370 0
5db7370 dgram 0 0 0 568a900 568a900 0
568b5f0 dgram 0 0 0 568b680 568b680 0
568b680 dgram 0 0 0 568b5f0 568b5f0 0
5db6dd0 dgram 0 0 0 5db6c20 5db6c20 0
5db6c20 dgram 0 0 0 5db6dd0 5db6dd0 0
5db6a70 dgram 0 0 0 5db6950 5db6950 0
5db6950 dgram 0 0 0 5db6a70 5db6a70 0
5db7eb0 dgram 0 0 0 5db7d90 5db7d90 0
5db7d90 dgram 0 0 0 5db7eb0 5db7eb0 0
568a2d0 dgram 0 0 0 568abd0 568abd0 0
568abd0 dgram 0 0 0 568a2d0 568a2d0 0
568a870 dgram 0 0 0 5db75b0 5db75b0 0
5db75b0 dgram 0 0 0 568a870 568a870 0
568b4d0 dgram 0 0 0 568a3f0 568a3f0 0
568a3f0 dgram 0 0 0 568b4d0 568b4d0 0
568bb00 dgram 0 0 0 568bc20 568bc20 0
568bc20 dgram 0 0 0 568bb00 568bb00 0
568cb50 dgram 0 0 59428ac 0 0 0 /var/run/syslog
Why do you think something is wrong with these results? I see multiple connections to Google (probably Google Docs), Squarespace, Amazon S3 and what appears to be Facebook and Verisign. Nothing jumps out as immediately suspicious.
Similar Messages
-
Please help - Scrollable result set in sql server 2000
Hi can some one please help me. I'm trying to create scrollable result set in sql server 2000, but i just can't get it to work. I've been trying to do this for the past 12 hours. I want to go home, but I can't till I get this going! please help!!! My crap code is as follows:
package transact;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.JInternalFrame;
import java.sql.*;
import java.io.*;
import java.util.*;
public class DummyFrame extends Dummy
protected String name, surname;
protected Connection conn;
protected CallableStatement cstatement;
public DummyFrame()
createFrame();
private void createFrame()
try
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
conn = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://server:1433;" +
"user=user;password=pwd;DatabaseName=Northwind");
catch (Exception e)
e.getMessage();
populateFields();
menuAction();
show();
private void menuAction()
btncontacts.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
getRecords();
populateFields();
btncontacts.setText("NEXT");
btnkeywords.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
// transaction.getRecords();
nextRecord();
populateFields();
btncontacts.setText("NEXT");
protected void nextRecord()
try
// CallableStatement cstatement = null;
cstatement = conn.prepareCall(
"{call Employee_Selection}", ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_UPDATABLE);
ResultSet rs = cstatement.executeQuery();
while (rs.next())
surname = rs.getString("Lastname");
cstatement.getMoreResults();
catch (Exception e)
e.getMessage();
protected void getRecords()
try
CallableStatement cstatement = null;
cstatement = conn.prepareCall(
"{call Employee_Selection}", ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_UPDATABLE);
ResultSet rs = cstatement.executeQuery();
while (rs.next())
surname = rs.getString("Lastname");
name = rs.getString("Firstname");
rs.first();
// call stored procedure
catch (Exception e)
e.getMessage();
// populate the fields;
private void populateFields()
txtfirstname.setText(name);
txtsurname.setText(surname);
}ummm ok i think the logic in your code is kinda screwy...
here is what your should be doing.
create the gui.
get the resultset...
have code that looks like this for nextRecord...
protected void displayNextRecord(){
// we do not call next here because we already called it last time
surname = rs.getString("Lastname");
name = rs.getString("Firstname");
populateFields();
if(!rs.next(){
btncontacts.setEnabled(false);// i'm not sure what btncontacts is but we want to disable next becuase there are no more records...
// in your intitalization code you need to do this...
// you old stuff ending with...
ResultSet rs = cstatement.executeQuery();
// the new stuff...
if(rs.first()){
displayNextRecord();
}else{
btncontacts.setEnabled(false);//the result set is empty
}ok the real problem you are having is that you are trying to display one record at a time but you are scrolling
through the entire result set using while(rs.next()... what you
want to do is create the result set once and scroll through
it one item at a time with your gui.
the example method i have given displays the data from the current
row in your gui. then it advances the result set forward one row if possible. this method assumes that the result set will always
be positioned on a valid row thus the need for calling
rs.first() before we originally call displayNextRecord()
well i hope you find this helpful. -
Please help - AbstractTableModel, result set and JTable
Pls help me on this:
I derive a new class, myTable that extends the AbstractTableModel, one of the member method is like this:
public void setValueAt( Object data, int row, int col ){
try{
resultSet.absolute( row + 1 );
resultSet.updateDouble( col + 1, Double.parseDouble( data.toString()));
resultSet.updateRow();
}//end try
catch( SQLException sqlEx ){
JOptionPane.showMessageDialog( null, "SQL error", "", 1 );
Everytime i try to update the data( which is double), example 2.00, i will see this runtime error:
java.lang.NumberFormatError: 2.00
The database is Microsoft Access 2000 and OS is Win ME. I update the data by using JTable GUI( which extends the new class myTable).
When i try to use Oracle database, then there is no problem for this.
How to solve this problem?can i get a look at your TableModel for the JTable.
Your problem with Access: Access "double" is not the same as
Oracle's double.
you can try the various types that have decimals until you find
which one access will accept. -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
I have my Calendar app syncing with iCloud. Every time I open it it says, "Moving Calendars to Server Account..." It runs and runs and does not stop. As a result, I cannot access my calendars. Please help.
I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that. Can someone help?
Elaine -
Last week, I purchased the pro version of PDF Max and today deleted the free version since I am not using it anymore.
I don't what happened or how, this also resulted in missing data on the pro version. I created loads of annotations and notes using the pro version. Now, all that's missing. I am using the word "missing" because I think the data (notes and annotations) is still there but its just not showing up in the app. Since, the size of the app did not change. It still is 1.24gb on iTunes. Can you guys please help me recover or should I say figure out a way to display the files on the app? Pretty please!I'm not familiar with the specific app, but generally speaking if the free and paid versions of an app are separate (i.e. not an in app purchase), what you are seeing will be the case. the only resolution I know of is if the vendor provides an account and stores the data online, or it integrates with something like DropBox. If not, once the old version is deleted, the data is pretty much gone.
-
How to code to get intermediate results in webdynpro ALV? Please help!
Hi Experts,
I got following info from help file to generate Intermediate Results(subtotal).
Can somebody help me with sample code to achieve this?
Basically I want to subtotal 'Qty' column based on 'Product' field.
By default, all values in a field are used in the calculation during aggregation. However, you
are also able to generate intermediate results. You group the data records that contain the
values for an intermediate result and display each intermediate result in its own result row.
To generate intermediate results, you have to provide certain information:
● To specify in which field the values from which the intermediate results are calculated
are located, generate an aggregation condition for the desired field. The overall result is
displayed in the result row.
● To specify which data records are contained in an intermediate result, group the data
records: You sort the ALV output by the field that includes the criterion for the
intermediate result.
● To then generate the intermediate results, calculate the intermediate results using the
field with the criterion.
● To then display the intermediate results, switch on the display of intermediate results.
You are able to make the following settings for intermediate results:
● Generate intermediate results
● Display intermediate results
● Setting levels for drilling down intermediate results
● Set the position of the result rows (see Settings for Aggregation [page 196])
● Forbid the generation of intermediate results
Prerequisites
● You have generated an aggregation object for at least one aggregatable field.
● The field with the criterion for intermediate results is not an aggregatable field, and
therefore has an alphanumeric data type.
Generate Intermediate Results
To generate intermediate results in a field that already has an aggregation condition, generate
a sort condition for the field of a column (another column) (see Sorting [page 190]).
In this sort condition, define whether intermediate results are to be generated. To do this, use
the methods of the class CL_SALV_WD_SORT_RULE.
Methods for Generating Intermediate Results
Function Method
Generate intermediate results SET_GROUP_AGGREGATION
Check whether intermediate results are displayed GET_GROUP_AGGREGATION
Display Intermediate Results
Once you have made all settings, to generate intermediate results you have to switch on the
display of these intermediate results. You use the methods of the interface class
IF_SALV_WD_FIELD_SETTINGS for this (implementing class
CL_SALV_WD_CONFIG_TABLE).
Methods for Displaying Intermediate Results
Function Method
Display intermediate results SET_GROUP_AGGR_DISPLAYED
Check whether intermediate results are displayed GET_GROUP_AGGR_DISPLAYED
I have tried a bit but it is not working. here is my code:
get field and create aggregation rule of type total
lr_field = l_value->if_salv_wd_field_settings~get_field( 'Qty' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
l_field = l_value->if_salv_wd_field_settings~get_field( 'PRODUCT' ).
l_sortrule = l_field->IF_SALV_WD_SORT~create_sort_rule( ).
l_sortrule~SET_GROUP_AGGREGATION( 'Y').
l_value->if_salv_wd_field_settings~SET_GROUP_AGGR_DISPLAYED( 'Y' ).
Please help
Message was edited by:
gopalkrishna baligaHi Gopalakrishna balgia,
I think i have answered in the below thread. Check it out.
How to show Subtotal in webdynpro ALV(ABAP)? Kindly help!
Regards
Rakesh -
Not getting Result please Help
Hi All
query_string VARCHAR2(2000);
query_string are EMPNO,ENAME
for rec1 in (SELECT query_string FROM p_table_name ) loop
utl_file.put_line(v_file, rec1.result1);
END LOOP;
not getting Result please Help
RegardsYou may look at this:
michaels> DECLARE
cur sys_refcursor;
query_string VARCHAR2 (2000) := '';
p_table_name VARCHAR2 (30) := UPPER ('emp');
p_stmt LONG;
BEGIN
FOR c IN (SELECT ROWNUM rn, column_name, COUNT (*) OVER () cnt
FROM user_tab_cols
WHERE table_name = p_table_name AND hidden_column = 'NO')
LOOP
query_string :=
query_string || c.column_name
|| CASE
WHEN c.rn != c.cnt
THEN ' || ''|'' || '
END;
END LOOP;
p_stmt := 'select ' || query_string || ' FROM ' || p_table_name;
-- DBMS_OUTPUT.put_line (p_stmt);
OPEN cur FOR p_stmt;
FOR rec1 IN (SELECT EXTRACTVALUE (t.COLUMN_VALUE, '/ROW//text()') result1
FROM TABLE (XMLSEQUENCE (cur)) t)
LOOP
/* replace with utl_file in case ... */
DBMS_OUTPUT.put_line (rec1.result1);
END LOOP;
CLOSE cur;
END;
7369|SMITH|CLERK|7902|17-DEC-80|800||20
7499|ALLEN|SALESMAN|7698|20-FEB-81|1600|300|30
7521|WARD|SALESMAN|7698|22-FEB-81|1250|500|30
7566|JONES|MANAGER|7839|02-APR-81|2975||20
7654|MARTIN|SALESMAN|7698|28-SEP-81|1250|1400|30
7698|BLAKE|MANAGER|7839|01-MAY-81|2850||30
7782|CLARK|MANAGER|7839|09-JUN-81|2450||10
7788|SCOTT|ANALYST|7566|19-APR-87|3000||20
7839|KING|PRESIDENT||17-NOV-81|5000||10
7844|TURNER|SALESMAN|7698|08-SEP-81|1500|0|30
7876|ADAMS|CLERK|7788|23-MAY-87|1100||20
7900|JAMES|CLERK|7698|03-DEC-81|950||30
7902|FORD|ANALYST|7566|03-DEC-81|3000||20
7934|MILLER|CLERK|7782|23-JAN-82|1300||10
PL/SQL procedure successfully completed. -
Quiz Reporting - No results are populated! Please HELP
Greetings,
I am currently developing a quiz for internal use. Something
very simple. I publish in flash, I have only 7 (short answer)
questions. However when I complete the questionaire, my email
client launches with the proper subject line, but that's it. I have
used multiple email clients (Outlook, OutlookExpress, Thunderbird)
with the lowest security settings available. I have also configured
my gloabl flash settings to allow everything. Even with all this
done I still get nothing. I've researched and found that Adobe
Captivate2 is compatible with my version of IE, although I haven't
had success with Firefox either. I have used 3 different computers
on my company's network, and 2 laptops that aren't even on it, in
addition my computer at the house.
Below are my settings I have been using (per Adobe's
instructions)
Reporting - enabled (email, with my email address filled in)
Report status as defined by report data
Report quiz results only
Report Interactions and score
Please help! Captivate is a great utility that I love
utilizing, but I feel this is a huge deficiency per my needs.
Adobe's Tech Support could not help. I emailed them my project and
they said it worked just fine on their computer. Which I find hard
to believe given the 6+ computers I have tried to use this on. The
final suggestion they had was to create an entirly new project from
scratch with Captivate2 (originally was using 1), but I have seen
no difference.
Thank YouHi chazzzmd and welcome to our community
Unfortunately, E-Mail is pretty weak and convoluted. Results
vary widely and are largely undesirable. But even so, are you able
to post the .CP file or resulting movie somewhere where the rest of
us can see it? Maybe one of us will see something that will help.
I've seen many here use something called
YouSendIt to do this.
Cheers... Rick -
Please Help Urgent:Fast Search returning wrong result sets
Hi All,
We are facing below issue with fast search.
Currently in My project when we are searching for a phrase it is returning wrong result sets.
For example if we search for “Endura”, It is returning documents related to
Endura as well as Centura.
But the expected results are only Endura documents.
When we look in to the documents we didn’t find the search term (“Endura” ) either inside document content or in its meta data.
In order to resolve the issue we tried the below steps
1-
We manually edited and saved the document, to ensure the appropriate Guid association to metadata.
2-
Index reset
3-
Full crawl
But no luck so far.
Please help.Thanks in advance.
Regards
SubratSubrat,
This may be related to spellchecking or may be synonym. Spellcheck is based on indexed terms.
The best test would be to run the queries from qrserver (13280) and then look at the spellcheck query transformations. If spellchecking is not doing it, then you must have a synonym setup .Check your keyword/synonyms from the SharePoint side. -
I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.
It appears that you may not have a properly installed OS X system.
You must be connected to the Internet to reinstall OS X.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Disk Utility,” and then click Continue.
Select your startup disk from the list on the left, and then Repair Disk.
After disk is repaired, select Reinstall OS X, then click Continue.
Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk -
Please help me in Query result.
Hello Friends..
Need some help .
I have refreshed one workbook for one sales document , and it is showing me all the data.
Could you please tell me how can i check all the key figure value , because in Query properties it is restricted to 0.
Means , if all the Key figure value are 0 , then it will not show that Row in Report .
I want to see the result of 0 value as well with out changing Query properties.
Please help me and advice me , how can i do this.
RegardsHi Jain,
Without changing the query properties it will not be possible to view all values.
If you want to view with changing the properties of query.
Youcan do the following steps
select each attributes right click >restrict->bring back the restricted value->and execute the query.
all the rows will be dispalyed
Hope this helps
Cheers
Sunil -
I've installed iTunes 10.2.1 but my computer doesn't recognise the hardware certificate and denies it, and the installation isn't complete. This results in my iPod being unrecognised and so, it cant synchronize with iTunes. Please help me! My system is a Windows XP.
Malware can cause digital signing issues, I would run a malware check with the free version of MalwareBytes:
http://www.malwarebytes.org/
After that, the is a Microsoft fixit for:
The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important.)
This software will not be installed. Contact your system administrator.
http://support.microsoft.com/kb/822798
It might be worth trying it. -
SQL Server 2012 Time(7) DataType values Comparison giving wrong result. Please help
We have a Table with StartTime and EndTime columns in Time(7) datatype, so we want to count the rows for each hour from 6 AM to 5 AM. If a record in table is as StartTime= 7 PM to EndTime = 5 AM (a shift of an employee) then the result is wrong beacause
being time(7) datatype the EndTime(5AM)< StartTime(7PM) in 24 hours format so following query gives wrong results.
select
* from EmpSchedule
where (StartTime>='19:00:00.0000000'
OR EndTime>='19:00:00.0000000')
Please help me out. ThanksDECLARE @clockIns TABLE (employeeID INT, startDateTime DATETIME, endDateTime DATETIME)
INSERT INTO @clockIns (employeeID, startDateTime, endDateTime)
VALUES
(1, '2014-07-01 19:01:00.000', '2014-07-02 04:27:00.000'),
(2, '2014-07-01 18:01:00.000', '2014-07-02 05:27:00.000'),
(3, '2014-07-01 19:01:00.000', '2014-07-02 05:27:00.000'),
(4, '2014-07-01 18:01:00.000', '2014-07-02 04:27:00.000')
SELECT *
FROM @clockIns
WHERE datepart(HOUR,startDateTime) BETWEEN 19 AND 23
OR datepart(HOUR,startDateTime) BETWEEN 0 AND 4
OR datepart(HOUR,endDateTime) BETWEEN 19 AND 23
OR datepart(HOUR,endDateTime) BETWEEN 0 AND 4
Try this out. -
Hello. I have a problem. I live in Armenia, now I am in Guangzho (China) and i have lost my Iphone 4S. Tryed to find in icloud, no result. it seems the finder has switched off or deleted my apple ID. Please help me. Can I do anything with IMEI code?
IMEI number is no use.
If you can't track it using find my phone.
Then report the lost to the local authority and your phone carrier.
change your passwords.
Maybe you are looking for
-
How can you update to the same row when........
Ok so now I have Session variables working correctly and come to find out that my host creates a new DB connection for each page displayed. So the Last_Insert_ID() will not work because of the new connection each time. What are my options for updatin
-
Adobe Story Desktop Application Won't Install
Hi, I just recently subscribed to the Adobe Creative Cloud CS6. I'm really interested in owning the Adobe Story desktop application and have attempted to download it by clicking the Install Desktop Application button. Unfortunately, all attempts have
-
CSS positioning not working in IE 5.2 on a Mac
Hi all, I have 2 images in my "about" page, the CSS positioning works fine in all other browsers. I'm working on a Mac with OS 10.41. I'm using Dreamwearver CS3. The page works great on all other browsers except IE 5.2 on my Mac, I have not checked o
-
Why doesn't CS5 Bridge see my RAW photos from my Canon 7D?
I just got a new Canon 7D. I can't open Raw files in CS5 Bridge...it only sees jpgs. Is there a setting I need to change? I have updated CS5 to latest updates.
-
Finder shows drives and folders, but no contents. It also won't show applications!
I have a really odd issue with Finder. I plugged in an external LaCie Rugged to a MacBook Pro, the drive shows up and when I open it I can see all of the folders on the drive, but when I try to open them it says there is nothing in them! At first I t