Please HELP - Strange importing problems

If anyone can help me I would greatly appreciate it.
I already went through all of the support articles on importing for WinXP so I'm not sure what else to do.
My itunes will show the track titles and everything correctly, but when I try to play the tracks, the speaker that represents if a track is playing goes down the list of tracks very fast and doesnt actually play any of the songs.
When I import the songs, they all have a length of the ENTIRE length of the album, like 787:16 or something like that.
The diagnostics test confuses me even more;
E: ARTEC WRR-52Z, Rev 1.25
Audio CD in drive.
Found 10 songs on CD, playing time 45:32 on Audio CD.
Track 1, start time 00:02:32
Track 2, start time 03:31:22
Track 3, start time 07:03:00
Track 4, start time 10:54:05
Track 5, start time 14:32:20
Track 6, start time 18:37:30
Track 7, start time 21:52:52
Track 8, start time 27:43:25
Track 9, start time 34:36:60
Track 10, start time 41:21:05
Audio CD reading failed. Error Code: 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450.
To play or import music from a CD in this drive, you must be logged in as an administrator.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24 32 40 48 52.
The drive CDRW speeds are: 4.
Someone PLEASE help me thank you so much!

I have this same problem. iTunes was working fine until yesterday... then the problem you described started! Help!

Similar Messages

PLEASE HELP FILE IMPORT PROBLEMS

I HAVE A WONDERFUL ARRAY OF SOUNDS I WOULD LIKE TO IMPORT AND PLAY THRU MY MIDI INSTRUMENT I.E. KEYBOARD BUT CANNOT. PLEASE SOMONE HELP ME VERRY FUSTRATED WITH LOGIC BECAUSE OF THIS REASON!!

NO ONE COULD HELP ME THANKYOU

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

HT5312 i forgot my secret question, please help me this problem. Thanks

I forgot my secret question, please help me this problem. Thanks

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
And/or see the More Like This section on the right.

HT4906 hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

Not ure what this has to do with iPhoto. Perhaps you'd be better off asking on the forum for your MacBookPro.

Please help with slideshow problems!

Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
Thanks

Thanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>

Problem-PLEASE HELP! IMPORTANT!

I have a Lenovo G530 laptop and all of a sudden, for no reason at all, the integrated webcam that is built into the computer won't work. I always keep my laptop in the same safe place, have never spilled anything on it, have done nothing to make it not work properly. I bought it brand new in September (it is February now) so it isnt that old either. I went to use my webcam on windows live messenger and it came up as a white screen. I went to My Computer, then to take pictures with it from its icon and it came up as the same white screen. I just used my webcam on Skype the other night and it worked fine. Everything else on my computer is running normally, but my webcam is very important to me as I use it alot to keep in touch with friends and family while I'm in university. If someone could please help me it would be greatly appreciated.
Solved!
Go to Solution.

right click my computer > manage > device management > camera > right click > remove device.
restart your computer and let windows install it again.
also you may need to re-install camera software, too.

PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors

http://www.smmlv.com/testproject/
Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
What is causing this color shift on the displayed NTSC image?
In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
PLEASE tell me there is a solution to this.

I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made.

Please help - CD import issue in itunes

I would really appreciate some help.
I have a Sony Vaio laptop and a HP I Pod.
Have used Itunes with no problems for 9 months and have imported/ripped hundreds of CDs into my library with no issues.
Recently, however, iTunes stopped allowing me to import/rip CDs into my library. When I try, it imports the first 4-5 seconds of the first song and then locks my entire computer up. I have to power down the laptop.
I attempted to run the CD diagnostic through iTunes, that also locked up the laptop.
I have uninstalled and re-installed iTunes several times.
I had my IT guy look at the laptop and do some preliminary research. He indicated that this is not uncommon and that others have reported having this problem since upgrading to iTunes 6.0.
Based on that, I un-installed 6.0 and went back to the version that came with the iPod. I think it is 4.9. Problem still exists.
Please help. I still have a lot of music I would like to load into iTunes.
Thanks!

This is what my CD Diagnostics results are:
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
HP Pavilion 061 PE529A-ABA A523X
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204), PxHelp20 (2.0.0.0), AFS2K (3.1.19.0), MxlW2k (1.1.0.116),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: VIA/S3G UniChrome Graphics\VIA/S3G UniChrome Graphics Adapter
IDE\DiskSAMSUNGSP1203N________________________TL100-24, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomNEC_DVD+RW_ND-2100AD___________________1.26___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: _NEC DVD+RW ND-2100AD, Rev 1.26
Audio CD in drive.
Found 12 songs on CD, playing time 54:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:08:02
Track 3, start time 10:47:27
Track 4, start time 15:01:15
Track 5, start time 19:07:55
Track 6, start time 22:46:30
Track 7, start time 27:29:05
Track 8, start time 31:34:72
Track 9, start time 35:35:07
Track 10, start time 39:56:50
Track 11, start time 43:22:07
Track 12, start time 49:42:17
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

Please help me - importing videos

Please help me if you can... I just finished converting a video on Videora, and now I have located the file, but I cannot drag and drop it into iTunes. I have tried going to File > Import... locating the file, and entering it, but that has not worked. Then I tried putting the file as a desktop icon and dragging and dropping it into iTunes, but that appeared to have failed also. Your suggestions would be greatly appreciated - please!

I have the same problem too. I downloaded videos from limewire and it says that its a WAV file or something but its really quicktime. Maybe I have that backwards but I wonder if it can be converted to the correct file that the ipod plays.

Please Help! Calendar problems :(

Hello there ~
I did a system update the other night and when it was complete, I had to reinstall Facebook. Once I did that, I accidently forgot to un-check the FB calendar (which I realize much too late) and it was causing my today theme calendar appts not to show.
I did a search to see why my calendar appts was not showing, which I ran across a thread on another forum - and it said to delete the CICAL, not the CMIME.. I accidently deleted the CMIME. Someone said to go to BIS and have my service book resent, which would restore the CMIME. I did that, then turned around and deleted the CICAL. Still was having the same problem.
Last night I was trying to figure it out - deleted the Facebook app, trying to select the default calendar.. and it still wouldn't work. When I would add an event - it would do it multiple times, yet still not show my other current events (which is what I am needing it to show!!).
Finally, somone suggested some steps to not only go into the calendar options or the service book - but to go into default services, then pick my default calendar (CICAL). The only "option" that is showing is Facebook and I have no other options. I am guessing that I need my original CICAL restored so I can choose it!! Am I correct?? I seriously wish I would of gotten that info a few days ago BEFORE I deleted my original CICAL!!
Unfortunately - I did not backup anything before I did the service update, which oddly enough caused my assigned ringtones to un-assign themselves.. which I think is strange, but whatever. That is an easy fix, but I desperately need my calendar to show up on my today theme!!
Please HELP!! I really need my calendar to show up on my today theme!!
Thank you!!!!

Welcome to the forums
Send service books to the phone by:
1. Logging in to your carrier's BIS site (where you setup your email)
2. Go to Help and click "Send Service Books"
Next, you have to move all your calendar appointments back into your default calendar (whicever one you want it to be). See this KB article, paying attention to Scenario 1 under Resolution: http://www.blackberry.com/btsc/KB19240
Then go back into options>advanced options>default services and set the default calendar to the one you want it to be.
Cheers,
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Please help - cannot import CDs into i-tunes

My other thread seems to have stalled out so I thought I would try again:
I have a Sony Vaio laptop and a HP I Pod.
Have used Itunes with no problems for 9 months and have imported/ripped hundreds of CDs into my library with no issues.
Recently, however, iTunes stopped allowing me to import/rip CDs into my library. When I try, it imports the first 4-5 seconds of the first song and then locks my entire computer up. I have to power down the laptop.
I have uninstalled and re-installed iTunes several times.
I had my IT guy look at the laptop and do some preliminary research. He indicated that this is not uncommon and that others have reported having this problem since upgrading to iTunes 6.0.
Based on that, I un-installed 6.0 and went back to the version that came with the iPod. I think it is 4.9. Problem still exists.
Please help. I still have a lot of music I would like to load into iTunes.
Thanks!
Sony Vaio Windows XP

First search your lap for any malware or viruses. Then check for any firmware/software updates for your laptop by going to the companys web site.

Please help Verticle line problem

Please help I have worked on this for hours below is my code. I need to create a face and I have a problem getting my g.drawline in the right place. I need it in the middle between the two eyes and not matter what I do it won't work. Could you help, please.
import java.awt.*;
import javax.swing.*;
public class Face extends JFrame {
     public Face(){
          super( "Face" );
          setSize( 300, 170 );
          setVisible ( true );
     public void paint ( Graphics g ){
          super.paint( g );
          g.setColor( Color.yellow );
          g.drawArc( 100, 45, 80, 80, 0, 360);
          g.setColor( Color.blue );
          g.drawArc( 120, 70, 10, 10, 0, 360);
          g.setColor( Color.blue );
          g.drawArc( 150, 70, 10, 10, 0, 360);
          g.setColor( Color.magenta );
(this is the nose)     g.drawLine ( 90, 147, 90, 180 ); THIS IS THE LINE I HAVE A PROBLEM
          g.setColor( Color.red );
          g.drawArc ( 110, 55, 60, 60, 0, -180 );
     public static void main(String args[])
          SmileyFace application = new SmileyFace();
          application.setDefaultCloseOperation(
                    JFrame.EXIT_ON_CLOSE );
I have changed the int to every possible number and it just won't work for me what am I doing wrong

try:
g.drawLine ( 140, 85, 140, 110 );
When you drew your head you specified g.drawArc( 100, 45, 80, 80, 0, 360);
What you are really saying is:
a) position the circle inside an imaginary rectangle with the top left corner at (100, 45) and make the width of the rectangle 80 and the height 80.
b) the center of this rectangle is
x = 100 + 80/2 = 140
y = 45 + 80/2 = 85
c) therefore draw a circle using (140, 85) as the center point (which is where I started your nose)
Add the following line to your program and you will see how the head fits into the rectangle:
g.drawRect(100, 45, 80, 80);
Hope my explanation helps.

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

Please HELP - Strange importing problems

Similar Messages

Maybe you are looking for