Please help, urgently Error 1 occurred at Scan From String (arg 1).

I am communicating with the AT Trainer 5000 via serial port to USB converter.
I installed all drivers of converter successfully and it is shown in MAX as com port. I also installed VISA software.
I am using labview 2013 version.
When I connect the hardware to PC via usb to serial converter, try to run the program for seeing of real time graphs, I am receiving this error Error 1 occurred at Scan From String (arg 1) whereas there is no waveform shown in waveform chart.
Also read buffer didn't show an incoming data at read buffer.
Other details for this error is
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
Also pics of error is:
Program is also attached. Please checked the also.
Expert please help me how to get rid of this error.
Attachments:
Project.vi ‏23 KB

duplicate post http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Error-1-occurred-at-Scan-From-String-arg-1/td...

Similar Messages

Error 1 occurred at Scan From String (arg 1)

I am communicating with the AT Trainer 5000 via serial port to USB converter.
I installed all drivers of converter successfully and it is shown in MAX as com port. I also installed VISA software.
I am using labview 2013 version.
When I connect the hardware to PC via usb to serial converter, try to run the program for seeing of real time graphs, I am receiving this error Error 1 occurred at Scan From String (arg 1) whereas there is no waveform shown in waveform chart.
Also read buffer didn't show an incoming data at read buffer.
Other details for this error is
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
Also pics of error is:
Program is also attached. Please checked the also.
Expert please help me how to get rid of this error.
Attachments:
Project.vi ‏23 KB

Since you are using the termination character, you should not use the Bytes At Port property node. Just set the number of bytes to read for the VISA Read to something really high (larger than what you expect in a single transmission). The VISA Read will stop reading once the termination character is reached.
Now, what is the format of the data coming from the instrument? I see you are converting an ASCII Hex string into a number while trying to also turn it into a double. That is likely why you are getting your error.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions

Error 88 occured at Scan From String (arg 1)

I am encountering this error. Please let me know what this is and how I can handle this.
Thanks,
Dushyant

Error 88 is listed as a run-time menu error.
I suggest you search this site for it, and if that doesn't help, post the relevant code here, so we can try to see what caused it.
Try to take over the world!

Error 85 occurred at Scan From String

Hi,
Below is my attached Vi.. Its was kind of working randomly, cause the timing of this error "Error 85 occurred at Scan From String (arg1)" Pops out randomly. Hope someone can tell me roughly where is my mistake.. Thanks...
Attachments:
E-Start.vi ‏41 KB

In your code, the function 'Scan From String' expects a string input that contains data in some specific (numeric) format.
If its not the case, it gonna throw this error (85).
You need to include additional code to handle this error in your program. While running your program, keep a probe at this input wire (string) and observe the data whenever you get this error (85).
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Please help with error message invoking external service from BPEL

Yes, I'm new to Oracle SOA Suite and BPEL Process manager. I've searched the forums, OTN, and Google and have not found any description of this error message:
"oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: <operation-name>"
Using JDeveloper 11.1.1.2.0 and WebLogic/SOA 10.3.2.0.
The BPEL process was built completely using JDeveloper's graphical tools... I haven't done any raw editing of the BPEL files yet. What types of things might I possibly be doing wrong that would cause this error to occur? Any idea what two things the server is comparing and deciding that there's a mismatch? It doesn't look like it is even attempting to invoke the external service, but bailing out before that, thinking that it's going to send bad data. Below is a bit more detail.
Also, I loaded up the WSDL (same one that I gave to JDeveloper) into SOAPUI. Then I took the payload that SOA was about to send (see below) and pasted it into SOAPUI. SOAPUI didn't complain and the target web service accepted the message and produced a "success" response. It looks like the payload is correct, so I don't know why SOA is complaining.
Thanks for any help you can offer.
=====================================================
Faulted while invoking operation "UpsertEmp" on provider "SiebelUSEmployeeIntegration".
<messages>
<input>
<UpsertEmpInput>
<part name="SiebelMessage">
<SiebelMessage>
<ns1:USEmployment>
<ns1:globalId>123456abcdef</ns1:globalId>
<ns1:employeeId>000123456</ns1:employeeId>
<ns1:effDt>1/1/2009</ns1:effDt>
<ns1:emplStatus>A</ns1:emplStatus>
<ns1:supported>N</ns1:supported>
<ns1:employed>Y</ns1:employed>
<ns1:activeStatus>Y</ns1:activeStatus>
<ns1:hrEditOnly>Y</ns1:hrEditOnly>
<ns1:paygroup/>
<ns1:statusCode/>
<ns1:origHireDate/>
<ns1:termDate/>
<ns1:latestHireDate/>
<ns1:locationCode/>
<ns1:locationDescr>Somewhere</ns1:locationDescr>
<ns1:positionCode/>
<ns1:jobCode/>
<ns1:jobDescr/>
<ns1:supervisorEmplid>000654321</ns1:supervisorEmplid>
<ns1:deptCode>ITG</ns1:deptCode>
<ns1:deptDescr>Information Technology Group</ns1:deptDescr>
<ns1:ministryCode/>
<ns1:ministryDescr>Core Services</ns1:ministryDescr>
<ns1:subministryCode/>
<ns1:subministryDescr>Information Technology Group</ns1:subministryDescr>
<ns1:wwcFreeSubFlag>N</ns1:wwcFreeSubFlag>
<ns1:lakeHartMC>1234</ns1:lakeHartMC>
<ns1:testFlag>Y</ns1:testFlag>
</ns1:USEmployment>
</SiebelMessage>
</part>
</UpsertEmpInput>
</input>
<fault>
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: UpsertEmp</summary>
</part>
<part name="detail">
<detail>Number of SOAP body elements and parts do not match in operation: UpsertEmp</detail>
</part>
</remoteFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>

Welcome to BPEL. Take a moment, and write "it's a namespace issue" on a sheet of paper. Post it near your monitor. It won't always be a namespace issue, but it's usually a good thing to suspect first! Is the namespace prefix ns1: defined somewhere? Does your XML that is being sent really match what the WSDL has for input to the UpsertEmp operation? The namespaces for each element level in the XML need to match, not just the lowest level.
When problems like this get really sticky, you can use TCP tunneling (obtunnel shell?) to capture what is really being sent to the server, and compare that to what is sent from SOAPUI. That's more useful if it's a subtle header problem, but you may get better error messages if you catch the BPEL message and send it using SOAPUI.
Good Luck, Andy

Please help me with my code (has conversion from string to int)

import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
public class Test3 extends MIDlet implements CommandListener
{   Form mForm;
    Command mCommandQuit;
    Command mCommandItem;
    TextField input,prime1,prime2,prime3,output;
    Display mDisplay;
    int i,j=0,k1,k2,p,q,b;
    //int [] current=new int [1000];
    String mstring,a="";
    String [] temp=new String [1000];
    public void startApp()
    {System.out.println("startApp");
     mForm=new Form("RSA Encryption");
     mCommandQuit=new Command("QUIT",Command.EXIT,0);
     mCommandItem=new Command("ENCRYPT",Command.ITEM,0);
     mForm.append("Enter text:\n");
     input=new TextField(null,"",100, TextField.ANY);
     mForm.append(input);
     mForm.append("Enter first prime number(p):\n");
     prime1=new TextField(null,"",100, TextField.ANY);
     mForm.append(prime1);
     mForm.append("Enter second prime number(q):\n");
     prime2=new TextField(null,"",100, TextField.ANY);
     mForm.append(prime2);
     mForm.append("Enter d:\n");
     prime3=new TextField(null,"",100, TextField.ANY);
     mForm.append(prime3);
     mForm.addCommand(mCommandQuit);
     mForm.addCommand(mCommandItem);
     mDisplay=Display.getDisplay(this);
     mDisplay.setCurrent(mForm);
     mForm.setCommandListener(this);
    public void pauseApp()
    {System.out.println("pauseApp");
    public void destroyApp(boolean unconditional)
    {System.out.println("destroyApp");
    public void commandAction(Command c, Displayable d)
    {System.out.println("commandAction");
     if(c==mCommandQuit)
        notifyDestroyed();
     else if(c==mCommandItem)
     {p = Integer.parseInt(prime1.getString());
         q = Integer.parseInt(prime2.getString());
         b = Integer.parseInt(prime3.getString());
         //breaking up of big string into ints
         mstring=input.getString();
         temp[0]="";
         for(i=1;i<mstring.length();i++)
            {if (mstring.charAt(i) == ' ')
                {j++;
                 temp[j]="";
             else
                {temp[j]=temp[j]+mstring.charAt(i);
         mForm.append("\n\nThe array is:\n");
         for(i=0;i<temp.length && temp!=null;i++)
{k1=Integer.parseInt(temp[i]); ***********************
k2=k1;
for(j=1;j<b;j++)
{k1=k1*k2;
k1=k1 %(p*q);
k2=k1 %(p*q);
a=a+new Character((char)k2).toString();
output=new TextField(null,a,100, TextField.ANY);
mForm.append(output);
}hi
this code basically takes an input of string like " 179 84 48 48 155 " (with spaces)
then it creates smaller strings in an array like "179","84","48","48","155" without the spaces
then it creates int values 179,84,48,48,155 and finally after some math functions it prints the corresponding letters.
the problem is that it is not printing the letter because of some exceptions-->java.lang.NumberFormatException .it comes in the line where i have put stars
could anybody please help me print the letters

thanks for all ur help guys, but me and my team member solved it on our own. here is the new code:
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
public class Test3 extends MIDlet implements CommandListener
{   Form mForm;
    Command mCommandQuit;
    Command mCommandItem;
    TextField input,prime1,prime2,prime3,output;
    Display mDisplay;
    int i,j=0,l,k1,k2,p,q,n,b;
    String mstring,a = "";
    String [] temp=new String [1000];
    public void startApp()
    {System.out.println("startApp");
     mForm=new Form("RSA Encryption");
     mCommandQuit=new Command("QUIT",Command.EXIT,0);
     mCommandItem=new Command("DECRYPT",Command.ITEM,0);
     mForm.append("Enter text:\n");
     input=new TextField(null,"",100, TextField.ANY);
     mForm.append(input);
     mForm.append("Enter first prime number(p):\n");
     prime1=new TextField(null,"",100, TextField.NUMERIC);
     mForm.append(prime1);
     mForm.append("Enter second prime number(q):\n");
     prime2=new TextField(null,"",100, TextField.NUMERIC);
     mForm.append(prime2);
     mForm.append("Enter d:\n");
     prime3=new TextField(null,"",100, TextField.NUMERIC);
     mForm.append(prime3);
     mForm.addCommand(mCommandQuit);
     mForm.addCommand(mCommandItem);
     mDisplay=Display.getDisplay(this);
     mDisplay.setCurrent(mForm);
     mForm.setCommandListener(this);
    public void pauseApp()
    {System.out.println("pauseApp");
    public void destroyApp(boolean unconditional)
    {System.out.println("destroyApp");
    public void commandAction(Command c, Displayable d)
    {System.out.println("commandAction");
     if(c==mCommandQuit)
        notifyDestroyed();
     else if(c==mCommandItem)
     {p = Integer.parseInt(prime1.getString());
         q = Integer.parseInt(prime2.getString());
         b = Integer.parseInt(prime3.getString());
         n=p*q;
         //breaking up of big string into ints
         mstring=input.getString();
         temp[0]="";
         for(i=1;i<mstring.length();i++)
            {if (mstring.charAt(i) == ' ')
                {j++;
                 temp[j]="";
             else
                {temp[j]=temp[j]+mstring.charAt(i);
         l=j;
         mForm.append("\n\nThe result is:\n");
         for(i=0;i<l;i++)
            {k1=Integer.valueOf(temp).intValue();
k2=k1;
for(j=1;j<b;j++)
{k2=k2*k1;
k2=k2 %n;
k1=k2 %n;
a=a+new Character((char)k1).toString();
output=new TextField(null,a,100, TextField.ANY);
mForm.append(output);

How do I avoid Error 85 in Scan From String scanning VISA read buffer?

I have encountered an Error 85 with my Scan From String VI. I have a timed
loop to read data from a device (flowmeter) using a serial port. This device takes
periodic measurements and sends the reading which contains a numerical value to the serial port COM1. It cannot be read continuously, and the period
between measurements may vary, so I decided a timed loop would be better than a while loop.
The VI begins with VISA Configure Serial Port and then
goes to a VISA Write which sends the message to the device to begin
taking measurements. After this, the device usually says "TAKE FLOWMETER READINGS" to the terminal, thereafter only sending numbers. Then begins my timed loop containing VISA Read. I
am taking the read buffer two places.
First, I am taking it to an Array to Spreadsheet String with the
Format String %.3f, as was in the Write to Text File example. Then I am
using Concatenate Strings with this string and also a string containing
the System Time. This string goes to Write to Text File, which I have
configured using Open/Create/Replace File outside of the loop.
Second, I am taking the read buffer to a waveform chart. I thought
it would be a good idea to use Scan From String to convert the string
into a DBL which I am then sending to the waveform
chart.
I am not sure if the initial "TAKE READINGS" message is giving me an error. I was able to get one reading saved to my text file from the device.
Also the format string for my Scan From String is %.3f
I am getting the Error 85 at the Scan From String only sometimes.
When this happens, there is no data being written to the text file. But
other times, I get data and it writes to the text file just fine (but
rounds to nearest whole number).
Any help would be greatly appreciated! This serial port device has been giving me a lot of trouble.

Is this what you mean? Did I wire the shift registers correctly?
I didn't know if you meant to Concatenate before Scan From String or Concantenate before or after VISA Read?
Message Edited by YeungJohn on 11-20-2008 03:48 PM
Message Edited by YeungJohn on 11-20-2008 03:49 PM
Attachments:
SerialShiftVI.JPG ‏87 KB

Scan from String (arg1) in TKTDS1k2K, Input parameter invalid

After calibration, i am getting a error about Command Requires GPIB controller to be controller in charge, and Scan from String (arg 1) in TKTDs1K2K scalewaveformarray.vi>scope_vppmeaurement.vi
LABVIEW: An input parameter is invalid.
NI-488: Commands Requires GPIB Controller to be in charge .
This program was working before 3rd party calibrated. Failing on first scope measurement. Passes Scope Setup.
Thanks from newbie scheduled a May Class.
Greg Shepherd
RUNNING tEST STAND & lABVIEW 8
Greg

One additional note. I have not had to use Regular Expressions very much, so I'm somewhat of a novice. My FIRST attempt to match either the Verbose or Abbreviated commands from the DSO was as follows:
:WFMP.*:XZE.* $
In words, what I’m trying to say is, “Match any instance of “:WFMP”, followed by any number of any character, followed by “:XZE” followed by any number of any character, and ending with a Space character.” It sure seemed like that should work...but it did not within the VI. That was when I tried other options and found the longer, "A or B" type of match would work, as described in my previous post.
This morning, a buddy sent me links to a couple of websites where you can experiment with Regular Expressions and see if your input is getting matched correctly. By using one of those tools, it appears that my initial attempt IS VALID, but yet, it didn't work within LabVIEW (8.6 for me). I have read some other posts RE: "Bugs" within the way LabVIEW works with Regular Expressions, so maybe this is something similar. But at least I'm up and running by using the long-way.

Please Help - "page error" / a system error occurred

I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail    Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message    Could not find the included template components/mix_documents2.cfm.
MissingFileName    components/mix_documents2.cfm
StackTrace    coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext    Error - array
1    Error - struct
COLUMN    0
ID    CFINCLUDE
LINE    15
RAW_TRACE    at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE    D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE    CFML
TagName    CFINCLUDE
Type    MissingInclude

With LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using?

Please Help - Urgent

Hi everyone, I�m having problems with Java Mail, I have just installed it along with the java activation framework, they are located in the following directories:
JavaMail: C:\jdk1.3.1\lib\javamail-1_2[1]
Java activation framework: C:\jdk1.3.1\lib\jaf1_0_1[1]
I have the classpath set as: C:\jdk1.3.1\lib\mail.jar;C:\jdk1.3.1\lib\activation.jar
When I try to compile the sample code provided with these packages, msgsend.java using Jbuilder 2 I get the following errors:
Error (36): cannot access directory javax\mail.
Error (37): cannot access directory javax\mail\internet.
Error (209): class message not found in class msgsend.
Error (210): class MessagingException not found in class msgsend
Error (134): class Session not found in class msgsend
Error (134): variable Session not found in class msgsend
Error (139): class Message not found in class msgsend
Error (139): class MimeMessage not found in class msgsend
Error (141): class InternetAddress not found in class msgsend
Error (145): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (146): Variable InternetAddress not found in class msgsend
Error (148): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (149): Variable InternetAddress not found in class msgsend
Error (151): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
Error (152): Variable InternetAddress not found in class msgsend
Error (162): Variable Transport not found in class msgsend
Error (170): class Store not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (172): class URLName not found in class msgsend
Error (189): class Folder not found in class msgsend
Error (195): Variable Folder not found in class msgsend
Error (197): class Message not found in class msgsend
Error (197): class Message not found in class msgsend
If I try to use another Java package to compile it I get even more errors (52), I cannot compile it by using the Javac command line compiler, it just says �Bad command or file name�.
Can anyone tell me Why this is happening and how I might be able to fix it please, I need to start learning Java Mail quickly but at the moment I can�t even begin to do this until I can understand how to get this sample code to work.
Thanks Everyone
Noel

First of all... don't post with topics like "Please Help - Urgent". The topic is supposed to reflect what the question is about.
Secondly... think for a second. If mail.jar is in C:\jdk1.3.1\lib\javamail-1_2[1]... why are you with your classpath saying that mail.jar is in C:\jdk1.3.1\lib ?
You classpath is supposed to point directly at you jar-files.
/Michael

Starting tomcat problem, please help urgent

I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
java.util.zip.ZipException: Access is denied
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:127)
     at java.util.jar.JarFile.<init>(JarFile.java:138)
     at java.util.jar.JarFile.<init>(JarFile.java:80)
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Bootstrap: Class loader creation threw exception
java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
     at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
     at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
     at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
THANKS
jim

Hi,
I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
SEVERE: Error deploying web application directory usi
java.lang.IllegalArgumentException
     at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
     at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
     at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
     at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
     at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
     at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

PASSWORD FOR FLODERS PLEAse HELP URGENT

HI ALL
please tell me the method of implementing password
provision for some folders/files in the system.
it should ask for password authentification before
opening when i click on the folder.
please help urgent
thanks
belur

Hi Swaroopba,
It can be very well done thru Form based Authentication.
For eg let me explain with respect to Tomcat.
Go to
$TOMCAT_HOME/webapps/examples/WEB-INF directory.
Please add the following code in it.
<security-constraint>
<web-resource-collection>
<web-resource-name>Protected Area </web-resource-name>

<url-pattern>/jsp/security/protected</url-pattern>
</web-resource-collection>
</security-constraint>
Please add the following code in it. And you have to specify the roles for it.
I hope this will be helpful for you.
Or if you want it in an application, please let me know.
Thanks
Bakrudeen

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Please help URGENT : Chinese handwriting doesn't seem to work on Lion OSX. the handwriting trackpad appears but anything i write in Chinese doesn't appear in word, chrome,..... HELP PLEASE

please help URGENT : Chinese handwriting doesn't seem to work on Lion OSX. the handwriting trackpad appears but anything i write in Chinese doesn't appear in word, chrome,..... HELP PLEASE
And in system prefs/language and text/input languages, simplified chinese and traditional chinese are ticked as usual with handwriting options on !!!!

Please search the forum for "chinese" to find the many other earlier posts about your issue, like
https://discussions.apple.com/message/15746805#15746805

I bought an iphone 5 on 01 February 2013 from your store to use in Turkey. But the phone is sim-locked. What can I do now? Please help urgently.

I bought an iphone 5 from apple store in Geneva to use in Turkey. But it is sim-locked. What can I do now. Please help urgently.

Return it to the store where you purchased & get your money back. Either that, or call the store. No one here can help you, as there is no one from Apple here.

Please help, urgently Error 1 occurred at Scan From String (arg 1).

Similar Messages

Maybe you are looking for