Please Help - "page error" / a system error occurred

I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail    Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message    Could not find the included template components/mix_documents2.cfm.
MissingFileName    components/mix_documents2.cfm
StackTrace    coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext    Error - array
1    Error - struct
COLUMN    0
ID    CFINCLUDE
LINE    15
RAW_TRACE    at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE    D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE    CFML
TagName    CFINCLUDE
Type    MissingInclude

With LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using?

Similar Messages

HT201210 please help with error occured 3194

Please I would like to update my iphone 4 to ios 6.0.1 but i tried and keeps saying error occured 3194 ...i would like to resore my iphone factory mode..or about to sale...apple stuff keeps breaking on me please... help...

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Please help: Strange error occurs when loading courseware

Hi all,
We have developed numerous training packages using Captivate 5. For the most part they seem to work nicely, however, three of our users (out of hundreds) have reported the following error (please view attached screenshot).
One user is using Firefox (dont know browser or flash version),
Second User is using Internet Explorer 8.0.7601 with a flash version of 10.2.1.53
Third user tried both IE and Firefox and has a flash version of 10.2.15.1
I myself am using IE 8 with a flash version of 10.2.153 and am not able to replicate the error.
I have done a search on the forums trying to see if anyone else has come accross the same error and found the following thread: http://forums.adobe.com/message/3269584 However we are not using the aggregator for our projects, and although we do use a preloader, the vast majority of our users are not experiencing problems. For those users who are having difficulties two of them seem to be able to open some modules but not others (yet the same pre loader is used throughout all our courseware).
One interesting observation that I have had is that for one user the error only occurs on modules that are using a table of contents (in overlay mode) and they are able to open all other modules. Yet, for one of the other users the error is occuring on all modules, even those without a table of contents.
I can't figure out what may be causing the problem because each user is experiencing the error under slightly different circumstances (In terms of flash versions, browsers and whether or not the module has a table of contents or preloaders).
Has anyone else experienced the above error. If so did you figure out what was causing the problem?
thanks!

Hi,
Would it be possible to share that swf file, so that i will try from my end and see whether i can reproduce the issue?
You can e-mail to my address [email protected]
Thanks,
Vikranth.

Hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud apple please help support errors no service network.thank you

hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud.apple please help support errors no service network.thank you
<Personal Information Edited by Host>

tran ngoc nhan,
Viết bằng tiếng mẹ đẻ của bạn?
Tôi đoán Việt Nam?
Chúng tôi có thể dịch!
Nói cho tất cả vấn đề của bạn!
Cung cấp cho nhiều chi tiết!
Nếu không Việt Nam, dịch này ở đây!
https://translate.google.com/
Write in your native language?
I guess Vietnamese?
We can translate!
Tell all your problem!
Give much detail!
If not Vietnamese, translate this here!
https://translate.google.com/
CCC

I've installed iTunes 10.2.1 but my computer doesn't recognise the hardware certificate and denies it, and the installation isn't complete. This results in my iPod being unrecognised. Please help me! My system is a Windows XP.

I've installed iTunes 10.2.1 but my computer doesn't recognise the hardware certificate and denies it, and the installation isn't complete. This results in my iPod being unrecognised and so, it cant synchronize with iTunes. Please help me! My system is a Windows XP.

Malware can cause digital signing issues, I would run a malware check with the free version of MalwareBytes:
http://www.malwarebytes.org/
After that, the is a Microsoft fixit for:
The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important.)
This software will not be installed. Contact your system administrator.
http://support.microsoft.com/kb/822798
It might be worth trying it.

Help "An error occured during the installation of assembly 'Microsoft.VC.80.CRT,version="8.0.50727.4053",type="win32".publicKeyToken="1fc8 b3b9a1e3b".process orArchitecture="x86"".Please refer to Help and Support for more information. HRESULT: 0x800736FD.

Help - I keep getting this message when trying to install iTunes on my computer - I have tried it on 2 different computers - one with Windows 7 and one with Vista - getting same message for both.
"An error occured during the installation of assembly 'Microsoft.VC.80.CRT,version="8.0.50727.4053",type="win32".publicKeyToken="1fc8 b3b9a1e3b".process orArchitecture="x86"".Please refer to Help and Support for more information. HRESULT: 0x800736FD.
Thanks

HRESULT: 0x800736FD
Are you running Vista or Windows 7, josh?

Please help, urgently Error 1 occurred at Scan From String (arg 1).

I am communicating with the AT Trainer 5000 via serial port to USB converter.
I installed all drivers of converter successfully and it is shown in MAX as com port. I also installed VISA software.
I am using labview 2013 version.
When I connect the hardware to PC via usb to serial converter, try to run the program for seeing of real time graphs, I am receiving this error Error 1 occurred at Scan From String (arg 1) whereas there is no waveform shown in waveform chart.
Also read buffer didn't show an incoming data at read buffer.
Other details for this error is
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
Also pics of error is:
Program is also attached. Please checked the also.
Expert please help me how to get rid of this error.
Attachments:
Project.vi ‏23 KB

duplicate post http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Error-1-occurred-at-Scan-From-String-arg-1/td...

Please Help! ERROR: Application Server failed. when Refreshing

Please help on this below issue. Thanks.
We have a requirement that using ASP.NET (C#), we need to open saved .rpt file (saved with data and the rpt file is assigned to the web page as query string) and let the users refresh themselves with latest data by clicking at refresh icon of the CrystalReportViewer. But it throws 'The Report Application Server failed' error message. What could cause this message. below is the piece of code we are using to configure the report.
private void ConfigureCrystalReports()
string reportPath = Server.MapPath("Reports
SEMS0001_UBS.rpt");
this.CrystalReportSource2.ReportDocument.Load(reportPath);
CrystalReportViewer1.Visible = false;
SetDBLogonForReport(this.CrystalReportSource2.ReportDocument);
int i = 0;
foreach (ParameterField field in this.CrystalReportSource2.ReportDocument.ParameterFields)
field.HasCurrentValue = true;
//this.CrystalReportSource2.ReportDocument.Refresh();
CrystalReportViewer1.ParameterFieldInfo = this.CrystalReportSource2.ReportDocument.ParameterFields;
CrystalReportViewer1.Visible = true;
public void SetDBLogonForReport(ReportDocument reportDocument)
Tables tables = reportDocument.Database.Tables;
connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
//foreach (CrystalDecisions.Shared.IConnectionInfo connection in reportDocument.DataSourceConnections)
// connection.SetConnection(ConfigurationManager.AppSettings["DBServer"], "", ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
// connection.SetLogon(ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
TableLogOnInfo tableLogonInfo = table.LogOnInfo;
tableLogonInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogonInfo);
//reportDocument.Database.Tables[0].ApplyLogOnInfo(tableLogonInfo);

Attaching full code ... Our case is the RPT files are stored wih default parameters and saved data. We need to let users just refresh the rpt files with latest db data and overwrite with the same rpt files. But this code keep showing The application server failed mesg. when the refresh icon of viewer is clicked.
Attaching the code as it is not properly attached in my previous reply ...
=======================
Begin - aspx.cs code
=======================
using System;
using System.Data;
using System.Data.OleDb;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.CrystalReports;
using CrystalDecisions.Shared;
using CrystalDecisions.Web;
public partial class _Default : System.Web.UI.Page
    private ConnectionInfo connectionInfo = new ConnectionInfo();
    protected void Page_Load(object sender, EventArgs e)
        if (!IsPostBack)
            //ConfigureCrystalReports();
    protected void CrystalReportViewer1_Init(object sender, EventArgs e)
        ConfigureCrystalReports();
    private void ConfigureCrystalReports()
        string reportPath = Server.MapPath(@"Reports\Report1.rpt");
        this.CrystalReportSource1.ReportDocument.Load(reportPath);
        CrystalReportViewer1.Visible = false;
        SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
        foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
            field.HasCurrentValue = true;
        //this.CrystalReportSource1.ReportDocument.Refresh();
        CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
        CrystalReportViewer1.Visible = true;
    public void ReportDocument_RefreshReport(object sender, EventArgs e)
        try
SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
            this.CrystalReportSource1.ReportDocument.SetDatabaseLogon("user", "passwd", "server", "");
            foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
                field.HasCurrentValue = true;
                field.AllowCustomValues = true;
                //field.EnableNullValue = true;
            this.CrystalReportSource1.ReportDocument.Refresh();
                   this.CrystalReportSource1.ReportDocument.SaveAs(@"C:\Inetpub\wwwroot\XsiteRpt\Reports\Report1.RPT", true);
        catch (Exception ex)
            Msg.Text = ex.Message;
    public void SetDBLogonForReport(ReportDocument reportDocument)
        Tables tables = reportDocument.Database.Tables;
        connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
        connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
        connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
        foreach (CrystalDecisions.CrystalReports.Engine.Table table in reportDocument tables)
            TableLogOnInfo tableLogonInfo = table.LogOnInfo;
            tableLogonInfo.ConnectionInfo = connectionInfo;
            table.ApplyLogOnInfo(tableLogonInfo);
=======================
End - aspx.cs.code
=======================
=======================
Begin - Assemblies
=======================
<assemblies>
                    <add assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.ReportSource, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Framework, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
      </assemblies>
=======================
End - Assemblies
=======================
=======================
Begin - aspx
=======================
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Xsite.aspx.cs" Inherits="_Default" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
    <title>Refresh Report</title>
    <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
        rel="stylesheet" type="text/css" />
    <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
        rel="stylesheet" type="text/css" />
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <asp:Panel ID="PanelMsg" runat="server">
        <br />
        <asp:Label ID="Msg" runat="server" Font-Bold="False" Font-Names="Verdana" ForeColor="Navy"></asp:Label>
        <br />
        </asp:Panel>
        <asp:Panel ID="PanelViewer" runat="server">
        <CR:CrystalReportViewer ID="CrystalReportViewer1" OnReportRefresh="ReportDocument_RefreshReport" runat="server" AutoDataBind="True"
            EnableDatabaseLogonPrompt="False" EnableParameterPrompt="False" ReuseParameterValuesOnRefresh="True" HasRefreshButton="True" Height="820px" OnInit="CrystalReportViewer1_Init" ReportSourceID="CrystalReportSource1" ShowAllPageIds="True" Width="1215px" />
        <CR:CrystalReportSource ID="CrystalReportSource1" runat="server">
        </CR:CrystalReportSource>
        </asp:Panel>
    </div>
    </form>
</body>
</html>
=======================
End - aspx
=======================

Urgent ..Please Help .Geting error URI too long

I have a jsp page and it has a text area. When I am inputing shorter
text it works fine but when I am putting longer text I am
having an error that "Get is not defined" and in the http server error
log I am getting URI too long error.
The text area when submitted...supposed to invoke a servlet which(the servlet) will do some error checking on the input text.
How can i overcome this limitation of http server ?
Please help ...
Thanks.

I tried with post method but still get the error.
Here is my jsp code..
<form name="inputnews" method="post" action="validation">
<table>
<tr>
<td width="600"><img src="//www.ibm.com/i/c.gif" width="600" height="4" alt=""/>
</td>
</tr>
and here is the servelet(name validation) code:
public void doPost(
     javax.servlet.http.HttpServletRequest req,
javax.servlet.http.HttpServletResponse resp)
     hrows javax.servlet.ServletException, java.io.IOException
          System.out.print("i am in post");
          HttpSession session = null;
          String flag3 = "";
          String check = "checkok";
          Info info = null;
          String category = req.getParameter("category");
          String title = req.getParameter("title");
          String content_area = req.getParameter ("content_area");
*** the content_area is the text area where user put long input
Anything i am missing here ?

PLEASE HELP! Error Message When Trying to Publish Site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP!!@

Business Catalyst does not support special characters in file names (i.e. "&"). Through normal paths of placing or importing files, Muse will automatically alter the file names during publish to remove the special characters. The one exception path I'm aware of is an .oam file from Edge, where Muse doesn't have enough knowledge of what all is within the .oam package to safely alter the file names.
When the error occurs, is it always for a file that contains a special character in the file name?
How many files are being uploaded?
If you click "Resume" does the Publish process:
A) Proceeds and completes
B) Puts up the same dialog for the same file
C) Puts up a similar dialog, but for a different file
D) Other?
Thanks.

Please help! error -61399, how to create custom vi for every input in project explorer

Please help! I have been trying whole night but couldn't get through it.
I am creating custom vi to simulate cRIO inputs on development computer. ( FPGA target>>execute vi on>> development computer>>custom vi) I then follow tutorial creating test benches:
Tutorial: Creating Test Benches (FPGA Module)
but when I run fpga vi I get error -61399, input item/node is not supported (input item/node is my input which I've added from project explorer).
The closest I got in my research on why this error is occuring- I have not connected all inputs/outputs in project explorer to custom vi. I followed tutorial exactly step by step but still I couldn't get through it.
Please help! Please help!
In order to do further investigation, I converted custom vi to a state machine , please find attachment. Having highlight execution on, it clearly demonstrates that input in cRIO are not being selected as a result default cases execute.
Please find attached modified custom vi with state machine, fpga vi, and original custom vi.
Best regards
Ta
Attachments:
custom vi.vi ‏32 KB
inverter.vi ‏16 KB
original custom vi.vi ‏22 KB

Solution:
You will see this error if no Custom VI has been selected or the Custom VI has not been configured for every I/O item that you are using in your FPGA code???
I think that's exactly where I'm stuck!
How do I configure it for inputs??? My attachement show that I have done everything being asked in tutorial!
Thanks!

Please Help unknown error

I just finished redesigning my website www.thelostsheepcompany.com and I did a preview in browser from Muse to check out the functionality and layout and everything worked seamlessly. however once I published it, it now comes up with this error: MuseJSAssert: Error calling selector function: Error no such interface supported on the contact us page (Contact Us) and the ministry registration page (Ministry Registration). I have no idea why this is happening. PLEASE HELP!!!

Hello,
It could be because of many reasons like conflict of any code with the form etc. If you have the back up file from the time when it was giving issue, we can check it for you and let you know the exact issue.
Regards,
Neha

PLEASE HELP, new error when I try to sync my iPod!!!

The past two times I've tried to sync my iPod nano (4th gen.), a message comes up saying "The iPod, 'Emily's iPod', cannot be synced. An unknown error occured (-48)." Though it seems that my iPod is still being synced, this message pops up three times throughout the process & the songs don't appear on my iPod.
I really don't want to have to lose all my songs & start iTunes all over again! Can someone please help?

You might want to reset that ipod, if still getting error 48 then try a restore or a different USB port.
That worked for this person:
http://discussions.apple.com/thread.jspa?messageID=7852037

PLEASE HELP! Error -50

I have tried EVERYTHING!
"media browser"
"export movie"
"export using QuickTime"
"share to iDVD"
"share to media browser"
But always:
The project could not be prepared for publishing because an error occured. (-50)
My film:
lasts for 06:51 mins
music is mp3
I have deleted many videos to get space for my film, so that doesn't seem to be the problem. PLEASE HELP ME, I'm dying here!
BTW: I have a Mac OS X version 10.06.08 and imovie´ 11 9.0.4

Hi
Error -50
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
I convert all audio to .aiff 48kHz or from Audio-CD 44.1kHz (still .aiff)
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Yours Bengt W

PLEASE HELP SOLVE ERRORS

Hi I'm new to Java & trying to create a simple calculator program by reading in three integers but I'm not exactly sure how to do it, I have attempted it below but keep getting errors, if anyone could tell me how to correct my code so I can read in the integers a,b,c when prompted to input them.
My code and the errors are below
//import ;
public class quadratic {
public static void main( String args[] ) {
double a, b, c;
System.out.println("\nA simple calculator program");
System.out.println("\n\nPlease enter a value for A");
a=(int)System.in.read();
System.out.println("\n\nPlease enter a value for B");
b=(int)System.in.read();
System.out.println("\n\nPlease enter a value for C");
c=(int)System.in.read();
Errors:
A:\>javac quadratic.java
quadratic.java:26: unreported exception java.io.IOException; must be caught or declared to be thrown
a=(int)System.in.read();
^
quadratic.java:29: unreported exception java.io.IOException; must be caught or
declared to be thrown
b=(int)System.in.read();
^
quadratic.java:32: unreported exception java.io.IOException; must be caught or
declared to be thrown
c=(int)System.in.read();
^
3 errors
Thanks for any help.

"System.in" is an InputStream and the "read" method can throw an IOException so you need to catch it. You should also probably check that the String read from System.in is an integer before you cast to (int).
e.g.
String s;
try {
a = Integer.parseInt(System.in.read());
} catch (NumberFormatException nfexc) {
... code to handle non-integer ...
} catch (IOException ioexc) {
... code to handle when an IO error occurs ...

Please Help - "page error" / a system error occurred

Similar Messages

Maybe you are looking for