PLEASE HELP with Audio for YouTube!

Hi,
I KNOW YouTube is not the best for quality, but I absolutely HAVE TO post a couple of videos there!
So.... having used Standard footage & the regular preset for DV-shot footage, does anyone KNOW which Encoding conversion to use (and I assume bitrate selection as well) that will allow me to post them on YouTube and actually hear something which even resembles the professionally Mastered recordings I am using. So far I have tried WMV, h264 & a few others with various bitrates and most all of them sound horrible once YT converts them. I was fine with the WMV video but the audio is way to disgusting to even listen to (especially compared to what the audio actually really is). I have read some posts here suggesting FLV, WMV, etc, & I am truly at a loss and in major need of help here. I have read Eddie's article link, & still the audio once YT does "it's thing" is ridiculous!
The audio sounds great (good enough) on my computer after Encoder does its thing, but if anyone has encountered this and has the answer....PLEASE - what conversion & WHAT BITRATE should I use to make YT NOT ruin my recordings (and sound good on there)?!?!
I even considered importing an already converted AAC or mp3 audio file into Pro, & then exporting it via Media Encoder but don't even think that's possible (or necessary).
Please help as I HAVE to post it on YT yesterday already!
As always, thank you for you help!!

I never really had problems with sound quality on youtube...but I just use stereo pcm/wav mostly in editor. I think you should post what your using in your project and what you are exporting it as...cause its too vague to really give much specific advice re: helping you. also, say whether you have any sound codec packs or anything loaded...anything other than the original program codecs...and say what version of the product you are using...premiere pro what ??

Similar Messages

Help with Audio for Premiere Project

Working on a lengthy project and need some help with audio which is not my specialty!
I am recording using a Sony EX1r and a wireless lav mic,     OK. Here is what is happening.
When I import the clip into project I get Audio from the left speaker.   If I burn a DVD and playback on home player with surround sound, I get audio out of just the left speaker which makes sense.    SO I go to Premier and use "Fill Left" which fixes the audio on my computer and get sound from left and right speakers.    The odd thing is that when I play this version back from DVD on the surround sound system, the audio now only comes from the CENTER speaker. I dont get anything out of left OR the right speaker so it sounds hollow.
I am sure I am missing something obvious so please be kind.
Is there an easy way to get my audio to come out of Left, Center, and Right speakers (and rear for that matter) ???
Thank you
Ted

Bill,
The DVD player is a Sony BluRay and the receiver is an Onkyo AV receiver HT-R380.
My thinking is that it is something that I am doing wrong inside Premiere vs something that the DVD player or receiver is doing.    My final product will need to play on a variety of DVD players so I need to get it right.
It just seems odd that my default output DVD provides sound to the left speaker but then removes it when I fill Left.
Am I setting up my audio tracks wrong? Or should I being doing something with a 5.1 track???
Thanks
Ted

Newbe requests help with audio for slide-show on Premiere Elements 4.

I recently wrote you regarding a problem I was having with a slide show I was making on Premiere Elements 4 importing photo clips and music from PhotoShop Elements 9. Thank you for your help.
This very large slide show, some 200 clips that I have not resized is completed. I am now having many problems with the music audio I am adding to various sequences of the slide show. Specifically:the audio will not stay fixed on the places where I put it and end it. Working on the Timeline Usually the length of the audio is shorter than the ending of the photo clips where it must go. I click on the audio and stretch it and end it at the place I designate. However, the other end has moved also so now I am left with a gap where there is no audio at the beginning of the segment. Now in addition, the "Delete and Close Gap" does not work most of the time causing me to manually move the photo tiles which sometimes move when this happens. I have to move each one or two individually to the left to close the gap and many times this causes loss of one or two photo tiles or they are out of order or have increase in number (of the one I am moving).
The program has also shut down for the past 10 days causing me to lose a good deal of work and sometimes photo clips and sometimes I get many duplicates of the photo clips. All I do is edit mostly the same two segments doing this over and over because I can't proceed to importing any more music because I can't get the first segments correct. I have chatted with you people, Sony techs, Microsoft Techs and Canon Techs. The Sony techs suggested the program was at fault and I used the original installation disk and repaired the program. It has still shut down on me but not as much.
I got error messages on the photo-cap instructions page you suggessted otherwise I would show pictures of the above problems.
I tried to copy and/or cut and paste from the Timeline thinking I would start a new slide show in PhotoShop Elements 9 using the same photos in reverse. The program would not let me copy or paste. There is great difficulty in highlighting the photo tiles in Timeline because I have to shift click on each individual tile and there are too many tiles and it would take too long to get a whole segment copied. Maybe you know another way to do this?
I am at a stand-still now and I am quite despondent because I have been working on this slide-show for 3 months and it was a surprise for my daughter's 25th anniversary that was last Tuesday.
I do hope you have some good suggestions that will lelt me complete this Project and get it on a disk. I am not that technical so please be specific.
Thanks in advance.
Kathy

Here's the basic advice I'd give, based on my experience. Much depends, though, on your goals and the specifics of your computer system:
1) Resize all of your photos to no larger than 1000x750 pixels in size. This is VITAL if you want the program to maintain stability as you work. Also render often (by pressing the Enter key). When the render, the red lines above the clips on your timeline will turn green and the program will run much more efficiently.
2) Work on your large slideshow project in shorter segments. You've got over 15 minutes worth of slides. Try working on this slideshow in 5 minute segments, output each segment and then combined the finished videos.
3) Use only WAV audio as your music and audio for your slideshow.
4) When you add video, audio or stills to a parallel track on your timeline, hold down the Ctrl key to override the ripple function and your current clips will remain in place.
5) Maintain your computer by using a tool like the excellent, free, one-click Advanced System Care available at http://www.iobit.com/advancedsystemcareper.html
As for Delete and Close Gap, how it performs depends on whether you've selected Clear or Delete, whether you've pressed the Backspace key or the Delete key and if there is video or audio on a parallel track. (This is all covered in my books, by the way, if you're interested.)
Without knowing the specifics of your project and your situation, it's hard to give out more specific information -- but this advice should get you a long way toward completing your project!

Please help with audio and video not syncing.

I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
Mark

Hi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help.

Please help with update for ios 8.1.3

Some one PLEASE HELP ME!!! I just updated my I phone 4s to ios 8.1.3 it was taking a long time then they finally updated and had the Hello screen after that I saw my photos then they would just delete it right in front of me I also lost some of my contacts but my notes still here can someone please help me find my photos are very important to me they have pictures of my relatives who passed away please help!!!

After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem.
We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month. Yes, you read it right. We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6. Just imagine what that does to battery life! The 5s would last about 5 hours and the 6 was dead in less than 14.
The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected. There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads. I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

Please help with audio problems, thanks!

Hi, I'm relatively new to DVD studio Pro and so far the manual has been useful but i've run into some sound related problems. I'm a composer/sound designer and this DVD is to be my reel so these are fairly integral issues to its success.
First, I want to add a sound effect to each of the roll over states, so one sound for the "over" and one sound for the "down" state. Currently i can only add audio as the backing track for each menu.
Second, whilst most of the items on the dvd are movies that include my music, I also want to have a page purely of audio tracks which play when pressed without changing the page. How can i do this? The only DVD i've seen this done on is "The Thin Red Line" extras, promoting the soundtrack to the film.
Thanks.

Welcome to the forum/discussions CC!
Sorry to have to inform you, but unfortunately layered menus aren't supporterd with audio in DVDSP, and technically what you're attempting is a layered menu-type function - although it just may be possible with scripts, I doubt it.
Your second request can be done however and there's several ways to go about doing it.
I like DVD@ccess but others would recommend a method of simply placing the audio files in the built file of the DVD making them accessible to users.
Another method I could suggest is to make a menu page exactly like the one you want to look the same and have the song you'd like to play as the music track for that duplicated-menu in question - set the target of the link for the song in the menu to go to the menu that has that song as the music track. Repeat that for the number of songs you'd like to have this feature.

Please help with sizing for a canvas wrap

I have looked at every video possible on this. I don't know what I am doing wrong?
RIght now my image size in cs3 is
60.2m
5616x3744 in pixels
18.72x12.48 in inches at 300 dpi
I want to make my image capable of being a 36x24 inch gallery wrap. I realize I have to go into image size but when I raise it to a 36x24 my calculations go out the roof! Is that okay?
222.5M
10800x7200 pixels
36x24 in inches at 300 dpi
Can I send something that large to a printing lab?
Sorry this is only my second time to do a gallery wrap and I am clueless about image size as far as measurements go!
I do have a 5d mark2 shooting RAW always that should allow me to have an image size of this quality easily right?

Grant
That is exactly why I am posting this... I HAVE NO FREAKING CLUE that I can reduce the dpi and if so how low can I go with my image needing to be sized at 36x24? Sorry, I am really just kidding around! I am no computer whiz with digital stuff, my love is strictly photography. I am so scared I will loose the quality I don't want to make a wrong move. I don't even know if I am suppose to up my size that much. I know my camera is good, but when it spits out a size like 18x12 in cs3 how high can I size it up and drop the dpi before I loose quality? Is there some kind of chart for this?
Thanks for your help!

Please help with snippet for form.

I'm building my wedding photography site with iWeb and I want to place a form on there where customers can, via a series of pull down menus, choose various addons to their wedding package which I want to show a running total at the bottom for an instant quote. I would then need to get a copy of this data sent to me.
What kind of HTML snippet would I need and where could I find one?
Thanks in advance.

Thanks Scott, that jot form looks great for a contact form etc. Due to being add free. But it doesn't look like it allows me to add a value to a selection on a drop down menu and a way of adding it up/displaying the total on my site.
Example id need fields like this;
"album required"
The available selections could be:
"12 x 8" value added to viable running total would be £100
"14 x 10" value added to viable running total would be £150
"16 x 12" value added to viable running total would be £200
Then another field may be:
"Hi Res CD required?"
the available selections could be:
"no thanks!" having a value of £0
"50 images" having a value of £100
"all images" having a value of £250
So if the user chooses "16 x 12" and "all images" the running total on the page would show the user "£450"
Any help would be greatly appreciated.
Thanks!

Please help with script for right-mouse click on 3D objects

Hi!
I have PDF file with two simple 3d objects (for example with two cube).
I need to make script that when user right-click to first cube, a PDF file (c:\a.pdf) opening (or c:\b.pdf for second one) in new windows. How to make it? Thank you so much!

Hi,
please check SDK sample 22 Right-Click, there is everything you need.
First catch RightClickEvent, then create the menu entry when beforeAction = true, and when beforeAction = false you have to remove it again (otherwise you will receive an error when rightclicking again).
Regards
Sebastian

Please help with query for 5 lastest opening balance !!!!!!!!!!!

Can anyone plese tell me or guide me how to write the query to show the 5 lastest opening balance from the A/R invoice on the specific BP partner?
Example
The box to input "BP partner"
and then show,
Lastest transaction | Ship date | Invoice number | Balance Amount | Culmulative
1
2
3
4
5
Your help will be very very appreciated.

This is very good but I would like to show only the top 5 remaining invoice. I think that I have to combine it with JDT1. I have seen one query that may be able to apply on my case.
SELECT
T1.CardCode + '' AS 'BP Code',
T2.Notes2 AS 'BP Name',
T0.RefDate,
CASE
     WHEN T0.TransType = 13 THEN 'IN'
     WHEN T0.TransType = 14 THEN 'CN'
     WHEN T0.TransType = 30 THEN 'JE'
     WHEN T0.TransType = 24 THEN 'RC'
     WHEN T0.TransType = 46 THEN 'PS'
     ELSE 'Error ! ! !'
END AS 'Doc Type',
T0.Ref1 'Doc. Number',
ISNULL(T0.FCCurrency, ' - ') AS 'Ccy',
(T0.BalFcDeb - T0.BalFcCred) AS 'Bal. F. Ccy',
(T0.BalDueDeb - T0.BalDueCred) AS 'Bal. Rs',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') <= -1)                     ,0) AS 'Future',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') = 0)                         ,0) AS 'Current Mth',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') = 1)                         ,0) AS '1 Mth Ago',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') = 2)                         ,0) AS '2 Mth Ago',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate ,'[%1]') = 3)                         ,0) AS '3 Mth Ago',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') between 4 and 6)    ,0) AS '4 - 6 Mth Ago',
ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') >= 7)                       ,0) AS '>7 Mth Ago'
FROM JDT1 T0
INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
LEFT OUTER JOIN OCPR T2 ON T1.CardCode = T2.Cardcode
LEFT OUTER JOIN OJDT T3 ON T0.TransID = T3.TransID
LEFT OUTER JOIN OINV T4 ON T3.TransID = T4.TransID
LEFT OUTER JOIN ORIN T5 ON T3.TransID = T5.TransID
WHERE
T1.CardType = 'C' and Balance != 0
and (T0.BalDueDeb - T0.BalDueCred) != 0
but still try to figure it out....

Please help with the FOR loop and the array..

I was trying to place some words in the Movie Clip
"TextPanel" and set a
random position to each of them.
But it's not working.
1) I created a Movie Clip "word" and inside that MC I created
a text field
and gave it an identifier "textFiled".
2) The linkage name for Movie Clip "word" I set to "word".
3) In the actionscript I created an Array called "aWords".
4) Then I created a FOR loop that should
place (attach) Movie Clips "word0", "word1", "word2" and
"word3" to the
movie clip TextPanel, and set the textField text for each of
them to the
text from the Array.
But the script attaches 4 Movie Clips with a name
"Undefined", instead of 4
different names (from the Array).
What is wrong with this script?
var aWords:Array = [apple,banana,orange,mango];
for(i=0;i<aWords.length;i++){
var v = TextPanel.attachMovie("word","word"+i,i);
v.textFiled.text = aWords
v._x = randomNumber(0,Stage.width);
v._y = randomNumber(0,Stage.height);
Thanks in advance

But in my Post I already wrote v.textFiled.text = aWords
so I don't understand what were you correcting..
And one more:
I have tested it by changing the
v.textFiled.text = aWords; to v.textFiled.text = "some
word";
and it's working fine.
So there is something wrong with the Array element, and I
don't know why..
"aniebel" <[email protected]> wrote in
message
news:ft2d5k$lld$[email protected]..
> Change:
> v.textFiled.text = aWords;
>
> to:
> v.textFiled.text = aWords
>
> It needs to know which element inside the array you want
to place in the
> textfield (or textfiled) :)
>
> If that doesn't work, double check that your instance
name is correct
> inside
> of "word".
>

Please help with script for 3D object

Hi!
I have PDF file with simple 3d object (for example a cube).
I need to make script that when user right-click to this cube, some PDF file (c:\mypdf.pdf) opening in new windows. How to make it? Thank you so much!

Hi!
I have PDF file with simple 3d object (for example a cube).
I need to make script that when user right-click to this cube, some PDF file (c:\mypdf.pdf) opening in new windows. How to make it? Thank you so much!

Please help with Specs for Elements 10

Its been so difficult to get to the detailed specs for Elements 10
Can anyone tell me if it does the following
1. Import raw data from a Panasonic X5?
2. Adjust vibrancy directly?
3. Add starburst effect like in this photo
Thanks

See this Adobe document for the latest Adobe Camera RAW (ACR) update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5371
The "ReadMe" link lists the supported cameras. (The DMC-LX5 is supported.)
Yes, a RAW file will open directly in ACR, and JPGs can be opened in ACR by using File...Open As.
No. You'll need to find a plug-in that does starbursts.
Ken
P.S., Barbara, once again, my slow typing did me in....

Please help with code for a program

Write a program which comutes the value of an investment over a 5 year period.The porgrm should display the value of an investment for each of the 5years were the initial investment and interest rate are to be specified by the user.It should compute and present value in the first year,compute and display value for the second year up to the last year(use a while or do...while loop).While there are more years to process ask the user for the next input,compute the value for the next year and output.

jverd wrote:
So what you're saying is that you're a lazy, stupid, unethical cheater and you want someone else to do your homework for you so that you can take credit you don't deserve and get a grade you didn't earn.
Go to hell.But he's willing to pay big bucks (10 duke stars!) for this, so let's race to get those precious dukes.

Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem?

PLEASE HELP with Audio for YouTube!

Similar Messages

Maybe you are looking for