Please help with margins and tags

Hope someone can help with a sudden problem I’m having with tags and margins. Out of the blue it seems Dreamweaver wants to create a margin between two <div’s,> but only if a tag is applied to the text, such as <p><h1><h2> etc.  Here’s an example; Say at the top of the page you have a <div> named “header,” below it there’s a <div> named “content.” So far no problem, but as soon as I put text in the “content” <div> and give the text a tag, the “content <div> drops roughly 25 – 30px below the “header” <div> leaving a margin.  To make it even stranger; If I were to insert an image into the “content” <div> first, then the text, it behaves as normal.  I’m just baffled; if anyone has an answer it would be greatly appreciated.

That did it, thank you so much!
It's still just a bit of a mystery why it suddenly started doing this, guess I’ll just have to strip that code in manually from now on, unless you have the answer on how to have it default to a margin and padding of 0.
Anyway, thank you for your help.

Similar Messages

  • Please help with importing and using imovie and idvd

    Hi,
    Please forgive my lack of knowledge. I previously had a mini dv camcorder that was so easy to use with imovie hd. Now that I have switched to an HD Usb 2.0 camcorder that has built in 16gb memory and memory cards, I have had such a great deal of trouble. I really hope you can help and point me in the right directions.
    Importing movies are fine, but they take so long! Currently, when I import a movie, I set the camcorder to PC mode and import through imovie. But the camcorder stays on, and I'm not sure if this is the best way or healthiest for the camcorder. Do you have a better/faster way to import movies? Is there a way to drag the video from the memory onto the computer, and then from there import the movie? I think at least I wouldn't have to leave the camcorder on.
    Also, one major issue I have is that each movie is broken down into 100 or so clips. I coach basketball, and videotape the games. When there is stoppage, I pause the camcorder. I guess that creates so many clips, so that when the film is imported, there are over 100 clips for the entire movie. Is there a way of making that just 1 entire movie/clip?
    Once I have imported the entire movie, which is 100+ clips, I want to simply create a dvd of the game. I know I have to share it, but do you have a better suggestion as to how I should handle this?
    In the past, all I did was import the mini dv movie into imovie HD, share into idvd, and then that was it, dvd made. This process had become so time consuming.
    Please help!

    Yes, I recognized there would be a slight pause between clips - but after all - you paused the camera at those points.
    Putting them all in sequence in iMovie and then encoding in iDVD will take a lot of time.
    An old favorite saying of mine is "not every job worth doing, is worth doing well'. The meaning being sometimes 95% is good enough so you can go on to the next job.
    How much work do you want to put into each DVD? Can you live with the slight pauses?
    would you suggest using a memory card?
    Yes, but 16GB cards aren't cheap (yet).

  • Please help with audio and video not syncing.

    I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
    Here's what I've done.
    1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
    Format: Video and Audio
    Video codec: H.264
    Resolution: 1920x1080
    Audio file format: Quicktime Movie (AAC)
    Include chapter markers: Unchecked
    Roles as: Quicktime Movie
    2) I run the .mov file in Compressor using the "Disc Burning" preset.
    3) I then import the .ac3 and .m2v files that Compressor created into Encore.
    4) In Encore, I select both files and go to New > Timeline.
    In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
    Video Clip:
    Source In: 00;00;00;00
    Duration: 00;02;33;29
    In-Point: 00;00;00;00
    Out-Point: 00;02;33;29
    Audio Clip:
    Source In: 00;00;00;00
    Duration: 00;02;34;00
    In-Point: 00;00;00;00
    Out-Point: 00;02;34;00
    What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
    Please help.
    Thanks!
    Mark

    Hi Mark.
    Do you have any situations where there is more than one video file in a timeline?
    Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
    I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
    As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
    Eliminating this may help.

  • Please Please help with JavaScript and Actions

    Hello!
    Is there a way to perform a saved Action from the Action Pallette using a JavaScript script? I know there is a way to do it with Visual Basic.
    Is there a way to run a Visual Basic script from a JavaScript script?(which could be a potential workaround if JavaScript CANNOT call on an Action)
    Is there a way to call on a JavaScript from an Action?
    Here's specific information on my problem:
    I am using Illustrator CS2 on a PC
    I have written all of the JavaScript scripts that I need to perform various layer selection procedures and they all work perfectly. I have placed them in the Presets > Scripts folder so that they appear in my file menu.
    I wrote a very long action that called on these scripts (using Insert Menu Item > then selecting the script by going File > Scripts) sequentially and did some selecting and copy-pasting and applying graphic styles in between scripts. The Action worked PERFECTLY and ran all the scripts I needed to an automated a process that usually takes me an hour in less than five minutes!
    I saved the actions and saved the file.
    After closing Illustrator all of the lines of the action that called on scripts disappeared! It seems this is a known bug...I currently know of no workaround.
    Can anyone help with any of the following things:
    1. Getting actions to SAVE the commands to run javascripts
    2. Writing a JavaScript that runs an Illustrator Action
    3. Writing a JavaScript that runs a Visual Basic script that runs an Illustrator Action.
    I spent three days learning the basics of JavaScript (mostly by trial and error) and successfully wrote all the scripts I needed...I was overjoyed! But now that I've closed illustrator my actions to run said scripts do not work. PLEASE ADVISE!!!
    Thanks in advance,
    Matthew

    try next
    1)if possible split JS-code into 2 parts (before/after action)
    2)make vbs script with contents
    Set appRef = CreateObject("Illustrator.Application.3")
    appRef.DoJavaScriptFile("C:\my1.js")
    appRef.DoScript(Action As String, From As String)
    'add wait while ActionIsRunning
    appRef.DoJavaScriptFile("C:\my2.js")
    3) run vbs (File > Scripts or double-click).

  • Please help with ovals and arrays

    i'm creating an array that will be used to create a number of bubbles (simple ovals) on the screen. I can create 1 bubble/oval with no problem, but when i use the array to create multiple ones, everything craches and i get a big number of errors.
    Can someone please help or point me in the right direction?
    thank you
    Marko
    p.s. the code that i'm using at the moment is listed below. * to draw 1 oval, array not used
    import java.awt.Color;
    import java.awt.Graphics;
    import javax.swing.JPanel;
    import javax.swing.JFrame;
    public class Bubbles extends JPanel
        int array[] = {1,2,3,4,5};
        public void paintComponent(Graphics g)
            super.paintComponent(g);
            this.setBackground(Color.WHITE);
            for(int x = 0; x<5; x++)
            g.setColor(Color.BLUE);
            g.drawOval((array.(30,30,100,100));
    public static void main( String args[])
    JFrame frame = new JFrame();
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Bubbles b = new Bubbles();
    b.setBackground(Color.WHITE);
    frame.getContentPane().add(b);
    frame.setSize(400, 400);
    frame.setVisible(true);

    Finally, this plug-in is ready for beta testing on www.amazoncanvas.com
    Thank you all who have participated in this program.

  • Please Help with Forms and SQL Plus Connection Issues in XE

    I am not able to connect with the Forms Builder or SQL Plus with the following errors:
    When attempting to connect with the supplied website.edu:port/orcl
         ORA-06401: NETCMN: invalid driver designator
    When leaving the connection information blank and using my local login and password
    for my copy of Oracle XE
         ORA-12560: TNS:protocol adapter error
    Based on some reading, I set the TNS_ADMIN user environmental variable, trying each of the tnsnames.ora locations but I'm still receiving the same errors
    Location 1: DevSuiteHome\...\tnsnames.ora
    Location 2: oraclexe\...\tnsnames.ora

    Thanks, Vikas!
    But I did a search for 6iServer.conf and did NOT locate any such file
    Please help
    TIA
    SHANKAR
    Shankar,
    It would have helped if you had indicated what is the full version of 9iAS that you have installed. By default the portnumber that is used is 7778.
    As per the entries, they should have already been made in the config files. But check that the 6iServer.Conf file and it should contain the entries that you are being told to update. If not, then add the entries in the 6iServer.conf file and that is all you need.
    HTH.
    Vikash

  • Please help with download and installation

    Hi,
    I am trying to download jdk1.4etc to Solaris Sparc. I tried downloading several times, all the times I get corrupt files. How and from where do I install JDK2 on Solaris. i am also in search of a good text editor like textpad for Solaris. Can anyone give me suggestions? Also, I need it immediately for my term assignments.
    Please Help!

    I am also having this problem. I have tried both the
    tar.Z and sh files. I have run the .sh as myself and
    as root. Here's what I see with the .sh installer:
    Do you agree to the above license terms? [yes or no]
    yes
    Unpacking...
    Checksumming...
    1
    The download file appears to be corrupted. Please
    refer to the Troubleshooting section of the Installation
    Instructions on the download page for more information.
    Please do not attempt to install this archive file.
    I am anxious to find a solution.I am having the same problem with both a download, j2sdk-1.4.0-linux-i386-rpm.bin, and Sun ONE cdrom, /disc3/j2se/1.4/j2sdk-1_4_0-linux-i386.bin, versions. I sincerely doubt that both are corrupted, at least I hope not. I'm attempting to set up the sdk under RedHat 7.2 in /usr/java. Have tried as both a user and as root - no joy! I would greatly appreciate any suggestions or help.

  • Please help with Firewall and/or other Settings to Chat (MSN Messenger).

    I've tried to chat on all (I think) the messenger programs available for Mac that use a hotmail account or .net passport - Adium, Fire, Mercury (current) and MSN itself - and I have the same problem with all of them: I keep getting cut off/disconnected from MSN! No problems with Yahoo messenger or Yahoo ID (although it can be a bit slow sometimes), just with .net passport account.
    I'm pretty sure it's got something to do with Firewall and/or related settings, but after months of trying to fix it, I'm about to give up... please help!
    Currently the following Firewall ports are all open:
    6891 – 6900
    1863
    80
    1080
    5060, 9000, 9010 (UDP – typed like that)
    including:
    Personal File Sharing
    Windows Sharing
    Remote Login - SSH
    and Printer Sharing.
    In my most recent disconnected conversation, Mercury logged a "socket fired exception" error.
    I'm on a broadband/adsl connection, shared with hubby's pc through ethernet (and he never gets disconnected from msn, btw).
    ANY suggestions would be welcome, but apart from the above, please tell me how/where to find what you tell me to look at or for, because I'm a new Mac user (six months), and on top of that I'm blonde
    Many Thanks!
    Mac Mini (PowerMac10,1)   Mac OS X (10.4.3)   1.42 GHz PowerPC G4 with 1 GB DDR SDRAM

    Update:
    Someone very kindly pointed out that my Firewall is actually Off (probably because I omitted to click on the Start button)... I did say I'm blonde
    So now I'm really stumped... anybody got any ideas? Please?

  • Please Help with multiple video tag editing

    I have about 650 music videos that I would like to have show up under the music video tab in my ipod and would like to know if there are any apps out there thay will allow me to change all the videos to Music Videos so they all dont show as Movies under iTunes and my iPod without having to right click and get info than change to music video - I think this option not already being included in Itunes for iPod videos is extremely stupid - anyone who can help me out and shed some light on a faster way please feel free to tell me and If there is a way in itunes to do this please let me know as I cant seem to find one
    And all Apple care says is maybe in the future we will look into to implementing this feature or something like it if we see fit and makes sense as we like to make our software as user friendly as possible
    Thanx
    Black Ipod Video 60gb
      Windows XP Pro  

    bump this up
    As I think this is a very good question and it should deff be looked into I mean cmon this is crazy there is no good reason that you should have to edit them 1 by 1
    Black 80gb Gen 5.5 Video as of Today

  • Please help with TV and home theater system for very large basement room....

    I'm looking to get my boyfriend either a TV or home theater system for the basement.  I know he eventually wants a 3d TV.  Right now he has a set up where he has 2 tv's so he can play video games and watch sports.
    The basement that the tv and home theater system will be in is large (I'd estimate at least 15 ft x 30 ft...maybe more) so I want to make sure the home theater system will be enough for the room.  We live in a ranch so basically the basement is almost the size of the house with some of it being storage.
    I've started to look at products online but there are so many and technology isn't really my thing.
    If anyone could help with recommendations for the home theater system and/or the tv I'd appreciate it!
    Thanks so so sooo much!!!!

    What will he be using the HT system for?  Just watching sports or skipping the movie theater and watching them at home.   If you plan to watch them at home your going to be on a tight budget with the home theater system but it is possible.   Spend good money on the sub, that is one speaker you don't want to skimp out on.  With such a big space you have a lot of room to fill and the cheap subs aren't going to cut it.   You will probably need two subs as it is.  The speakers I recommend on a tight budget Polk or Klipsch.  My list includes a Denon receiver as I am a Denon fan but Yamaha, Onkyo, or Pioneer will suffice.
    Here is a Option 1 will run you about 1700 with just one sub. You could always go up a model on each speaker if you feel the one sub is enough.  I like an explosion sounding like it happened in front of me so that is why I mention 2 subs.
    http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
    http://www.bestbuy.com/site/Polk+Audio+-+Dual+5-1/4%22+2-Way+Floor+Speakers+(Each)+-+Black/8825453.p... speakers&cp=1&lp=12
    http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Bookshelf+Speakers+(Pair)+-+Black/8825444.p?id=120... speakers&cp=1&lp=2
    http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Center-Channel+Speaker+-+Black/8826149.p?id=120735... speakers&cp=1&lp=28
    http://www.bestbuy.com/site/Speakers/Subwoofer-Speakers/abcat0205008.c?id=abcat0205008&&initialize=f...
    Option 2 will cost $1400 before a subwoofer
    http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
    http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-CC+Ompipolar+3-Way+Center-Channel+Speaker+-+Blac... speaker&cp=1&lp=11
     and 4 of the below speaker
    http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-SAT+4-1/2%22+2-Way+Satellite+Speaker+(Each)+-+Hi... speaker&cp=1&lp=15

  • Please Help with Deleting and Putting in Music

    Hi. I have a Nokia5300 Express Music. I want to add music on it but i don't know how. I have windows media player the PC suite thing and everything. But I don't know how to delete music or import music please help. This is very different from the ways i do it from the Ipod ...
    HELP HELP HELP

    wait wait guys please help me delete my music i really want to delete ALL my music and put in NEW music i hate the windows media player iuno how to unsync it and delete it T_T

  • Please help with jsp and database!!

    Hello,
    i first created a jsp page and printed out the parameters of a user's username when they logged in. example, "Welcome user" and it worked fine...
    i inserted a database into my site that validates the username and password, and ever since i did that in dreamweaver, when a user logs in sucessfully, it returns the jsp page like its supposed to, only that it says "Welcome null" instead of "Welcome John." pretty strange, huh!? can anyone please help? thanks!
    here is the important part of the code to Login.jsp, and LoginSuccess.jsp: <%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" %>
    <%@ include file="Connections/Login.jsp" %>
    <%
    // *** Validate request to log in to this site.
    String MM_LoginAction = request.getRequestURI();
    if (request.getQueryString() != null && request.getQueryString().length() > 0) MM_LoginAction += "?" + request.getQueryString();
    String MM_valUsername=request.getParameter("Username");
    if (MM_valUsername != null) {
      String MM_fldUserAuthorization="";
      String MM_redirectLoginSuccess="LoginSuccess.jsp";
      String MM_redirectLoginFailed="LoginFailure.jsp";
      String MM_redirectLogin=MM_redirectLoginFailed;
      Driver MM_driverUser = (Driver)Class.forName(MM_Login_DRIVER).newInstance();
      Connection MM_connUser = DriverManager.getConnection(MM_Login_STRING,MM_Login_USERNAME,MM_Login_PASSWORD);
      String MM_pSQL = "SELECT UserName, Password";
      if (!MM_fldUserAuthorization.equals("")) MM_pSQL += "," + MM_fldUserAuthorization;
      MM_pSQL += " FROM MemberInformation WHERE UserName=\'" + MM_valUsername.replace('\'', ' ') + "\' AND Password=\'" + request.getParameter("Password").toString().replace('\'', ' ') + "\'";
      PreparedStatement MM_statementUser = MM_connUser.prepareStatement(MM_pSQL);
      ResultSet MM_rsUser = MM_statementUser.executeQuery();
      boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
      if (MM_rsUser_isNotEmpty) {
        // username and password match - this is a valid user
        session.putValue("MM_Username", MM_valUsername);
        if (!MM_fldUserAuthorization.equals("")) {
          session.putValue("MM_UserAuthorization", MM_rsUser.getString(MM_fldUserAuthorization).trim());
        } else {
          session.putValue("MM_UserAuthorization", "");
        if ((request.getParameter("accessdenied") != null) && false) {
          MM_redirectLoginSuccess = request.getParameter("accessdenied");
        MM_redirectLogin=MM_redirectLoginSuccess;
      MM_rsUser.close();
      MM_connUser.close();
      response.sendRedirect(response.encodeRedirectURL(MM_redirectLogin));
      return;
    %>
          <form action="<%=MM_LoginAction%>" method="get" name="Login" id="Login">
            <table width="55%" border="0">
              <tr>
                <td width="41%">Username </td>
                <td width="59%"><input name="Username" type="text" id="Username" value="" size="25" maxlength="10"></td>
              </tr>
              <tr>
                <td>Password </td>
                <td><input name="Password" type="password" id="Password" value="" size="25" maxlength="10"></td>
              </tr>
              <tr>
                <td> </td>
                <td><input type="submit" name="Submit" value="Submit"></td>
              </tr>
            </table>
          </form>And LoginSuccess.jsp where i want it to print out the "Welcome username
             <%String Name=request.getParameter("Username");
         out.println ("Welcome ");
         out.println (Name); %>

    <%@ page contentType="text/html; charset=iso-8859-1"
    language="java" import="java.sql.*" %>
    <%@ include file="Connections/Login.jsp" %>
    <%
    // *** Validate request to log in to this site.
    String MM_LoginAction = request.getRequestURI();
    if (request.getQueryString() != null &&
    request.getQueryString().length() > 0) MM_LoginAction
    += "?" + request.getQueryString();
    String
    MM_valUsername=request.getParameter("Username");
    if (MM_valUsername != null) {
    String MM_fldUserAuthorization="";
    String MM_redirectLoginSuccess="LoginSuccess.jsp";
    String MM_redirectLoginFailed="LoginFailure.jsp";
    String MM_redirectLogin=MM_redirectLoginFailed;
    Driver MM_driverUser =
    =
    (Driver)Class.forName(MM_Login_DRIVER).newInstance();
    Connection MM_connUser =
    =
    DriverManager.getConnection(MM_Login_STRING,MM_Login_US
    RNAME,MM_Login_PASSWORD);
    String MM_pSQL = "SELECT UserName, Password";
    if (!MM_fldUserAuthorization.equals("")) MM_pSQL +=
    = "," + MM_fldUserAuthorization;
    MM_pSQL += " FROM MemberInformation WHERE
    E UserName=\'" + MM_valUsername.replace('\'', ' ') +
    "\' AND Password=\'" +
    request.getParameter("Password").toString().replace('\'
    , ' ') + "\'";
    PreparedStatement MM_statementUser =
    = MM_connUser.prepareStatement(MM_pSQL);
    ResultSet MM_rsUser =
    = MM_statementUser.executeQuery();
    boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
    if (MM_rsUser_isNotEmpty) {
    // username and password match - this is a valid
    lid user
    session.putValue("MM_Username", MM_valUsername);
    if (!MM_fldUserAuthorization.equals("")) {
    session.putValue("MM_UserAuthorization",
    ion",
    MM_rsUser.getString(MM_fldUserAuthorization).trim());
    } else {
    session.putValue("MM_UserAuthorization", "");
    if ((request.getParameter("accessdenied") != null)
    ll) && false) {
    MM_redirectLoginSuccess =
    ess = request.getParameter("accessdenied");
    MM_redirectLogin=MM_redirectLoginSuccess;
    MM_rsUser.close();
    MM_connUser.close();
    response.sendRedirect(response.encodeRedirectURL(MM_re
    irectLogin));
    return;
    %>
    <form action="<%=MM_LoginAction%>" method="get"
    "get" name="Login" id="Login">
    <table width="55%" border="0">
    <tr>
    <td width="41%">Username </td>
    <td width="59%"><input name="Username"
    ="Username" type="text" id="Username" value=""
    size="25" maxlength="10"></td>
    </tr>
    <tr>
    <td>Password </td>
    <td><input name="Password" type="password"
    ="password" id="Password" value="" size="25"
    maxlength="10"></td>
    </tr>
    <tr>
    <td>�</td>
    <td><input type="submit" name="Submit"
    me="Submit" value="Submit"></td>
    </tr>
    </table>
    </form>
    And LoginSuccess.jsp where i want it to print out the
    "Welcome username
             <%String Name=request.getParameter("Username");
         out.println ("Welcome ");
         out.println (Name); %>When the page is rediredted u r not passing the user name in the query string,so it is not availble in the query string for LoginSuccess page
    Since u have added user in session user this
    <%String Name=(String)session.getValue("MM_Username") ;%>
    <%     out.println ("Welcome ");
    <%      out.println (Name); %>

  • Please Help with Viewstack and custom component

    I'm having trouble trying to embed a component within a
    viewstack. I have my main applicaiton main.mxml application and the
    calander control from quietly scheming (app.mxml) is the component.
    The issue I'm having is how to have the calendar show within my
    viewstack canvas. The app.mxml file namespaces below:
    <?xml version="1.0" encoding="utf-8"?>
    <local:app_code xmlns:local="*" xmlns="
    http://www.adobe.com/2006/mxml"
    xmlns:qs="qs.controls.*" xmlns:g="qs.graphics.*"
    xmlns:qc="qs.containers.*"
    creationComplete="load();" xmlns:ns1="qs.containers.*"
    xmlns:effects="qs.effects.*" width="100%" height="100%"
    layout="absolute">
    <Style source="calendar.css" />
    <Style source="styles.css" />
    <Script source="app_imports.as" />
    </local>
    My application main.mxml has different namespaces:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application
    xmlns:mx="
    http://www.adobe.com/2006/mxml"
    initialize="showLogin();"
    layout="absolute"
    horizontalGap="0"
    horizontalAlign="center"
    cornerRadius="20"
    xmlns:controls="com.adobe.ac.controls.*"
    >
    </application>
    If I take the code out of app.mxml and plae it on my
    viewstack canvas, I get all types of errors referencing functions
    or components in the other namespaces.
    Does this make any sense ? I just want to view the calendar
    in the viewstack.
    Please help

    I guess I'm just not understanding the difference betweeen
    the <local:app_code> in the app.mxml file and the
    <mx:Application> in my main application.
    If I run the app.mxml by itself, everything is fine. if I try
    to take the code out and past it within the viewstack canvas I get
    reference errors. It can't find the objects/functions from the
    <local:app_code> namespace.
    I guess I'm just confused on how to structure the entire
    application.
    Thanks all for your responses.

  • Please help with email and synching

    Hoping someone could help with my email!! I have my show filed messages to off. So, when I go in the hub and click my one email account, it shows all my filed emails, such as a folder named old mail. Now, I can fix this by clicking on the dropdown and click inbox, then it shows just my inbox and no filed messages. But if I get a text or FB and enter that in the hub, then click back in the email account it then shows all my filed messages. I just want to see my inbox and that is it! Why is this not working right? I'm on 10.1 and using Microsoft Exchange. I have my old mail being synced, but I don't want to see my old mail. It's literally thousands of emails.  If I unsych old mail then it is fine...but if I want to file something to the old mail file, then the whole thing sychs again and shows all my filed messages.
    I don't know why this is becoming so difficult, but I just can't continue with my email folder showing all of these folders I don't want to see. The email is hard enough without seeing a line of the body of the email and only the subject....this is making it even more crazy for me. I really want to stick it out....but not sure if I can...and I want to. Is this a bug or just the new way BB handles email.  Assuming its a bug being I have filed messages not to be seen.

    Finally, this plug-in is ready for beta testing on www.amazoncanvas.com
    Thank you all who have participated in this program.

  • Please help with servlet and database!!

    Hello,
    i first created a servlet that generated an html page and printed out the parameters of a user's username when they logged in. example, "Welcome user" and it worked fine...
    i inserted a database into my site that validates the username and password, and ever since i did that in dreamweaver, when a user logs in sucessfully, it returns the servlet page like its supposed to, only that it says "Welcome null" instead of "Welcome John." pretty strange, huh!? can anyone please help? thanks!

    Check whether the username textfield name has changed or not. Also print the code over here so that we can check the code.

Maybe you are looking for