Please Please help with set up

Had my time capsule for 6 months and I can not get it to sync with my Mac Book Pro. When I set up the wireless part the internet works great. When I open up time machine it says "connecting to back up volume" then "time machine backup disk can't be found". It then asks to set up time machine which I click on then turn time machine on, then "select disk" which give me the option of "none" or "data on time capsule" When I click on "data on time capsule" it asks for my password which i set up on time capsule then it says invalid password. I just get stuck there.
When I go to finder I can set up the time machine to manually drop some files on there but when I do the internet does not work. I have to hit the little reset button on the time capsule to reset it and I just leave it alone and the internet comes back on. I have been doing this back and forth as I am trying to move some pictures over to the time capsule because my memory is so full I don't have room to update any programs.
I know this is long winded but there has got to be something I am missing. I really am at the end of my rope trying to get this to work. Many thanks in advance for any help.

Suggest that you open AirPort Utility, and click Manual Setup
Click the Time Capsule tab just below the row of icons.
Enter a new Time Capsule Password here and confirm that again. Write that password down.
Click the Disks icon
Click the File Sharing tab
Make sure that the setting for Secure Shared Disks = With Time Capsule password
Update to save settings
Restart the Mac
Try to access the disk again entering the new password that you created

Similar Messages

Why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Please, need help with a query

Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_date

Take a look on the syntax :
max(...) keep (dense_rank last order by ...)
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions056.htm#i1000901
Nicolas.

Please need help with this query

Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_date

Perhaps something like this...
select id, create_date, loanid, rate, pays, gracetime, emailtosend, first_name, last_name, user_id
from (
      select distinct a.id,
                      create_date,
                      a.loanid,
                      a.rate,
                      a.pays,
                      a.gracetime,
                      a.emailtosend,
                      d.first_name,
                      d.last_name,
                      a.user_id,
                      max(create_date) over (partition by a.user_id, a.loadid) as max_create_date
      from CLAL_LOANCALC_DET a,
           loan_Calculator b,
           bv_user_profile c,
           bv_mr_user_profile d
      where b.loanid = a.loanid
      and   c.NET_USER_NO = a.resp_id
      and   d.user_id = c.user_id
      and   a.is_partner is null
      and   a.create_date between
            TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
            TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
where create_date = max_create_date
order by create_date

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

Help with set(index, object) please / new to java

private static void setDobject(Rectangle [] setrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.set(1,myrectangle);
          for(Rectangle x : setrect)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
     } //End of unsorted
     } the other previous code works, i have used the add(object) and it works here is the code for that:
private static void addDobject(Rectangle [] addrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.add(myrectangle);
             for(Rectangle x : rects)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
          System.out.println();
     } //End of unsorted
this is the output error it is giving me :
Part 1 : An Array List of Rectangles
Enter length or 999 to exit: 3
Enter width: 2
Enter length or 999 to exit: 1
Enter width: 2
Enter length or 999 to exit: 10
Enter width: 20
Enter length or 999 to exit: 999
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Display Object with added item
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Rectangle: 9.0 by 9.0
Displaying Objects with SET item
Exception in thread "main" java.lang.IndexOutOfBoundsException: Index: 1, Size:
0
at java.util.LinkedList.entry(LinkedList.java:365)
at java.util.LinkedList.set(LinkedList.java:328)
at Lab11.setDobject(Lab11.java:129)
at Lab11.main(Lab11.java:78)
Press any key to continue...
finally here is the Rectangle class i'm using:
public class Rectangle
    private double length;     // Instance variables
    private double width;
    public Rectangle(double l, double w) // Constructor method
        length = l;
        width = w;
    } // end Rectangle constructor
    public double getLength()             // getter
         return length;
    } // end getLength
     public double getWidth()             // getter
         return width;
    } // end getWidth
    public void setLength(double l)      // setter
         length = l;
    } // end setLength
     public void setWidth(double w)     // setter
         width = w;
    } // end setWidth
     public double calculateArea()         // calculation method
        return length * width;
    } // end calculateArea
    public void displayRectangle()         // display method
        System.out.println("Rectangle Length = " + length);
        System.out.println("Rectangle Width = " + width);
    } // end displayRectangle
} // Rectangle ClassHope you can help guys! thanks!

LinkedList<Rectangle> rects = new LinkedList<Rectangle>();rects is an empty LinkedList at this point. It has no elements added to it.
rects.set(1,myrectangle);So you can't set the item at index 1 (the 2nd element in the list) because it doesn't even exist. You need to add items to it.

New computer ~ Help with setting up

Hi everyone, Newbie here!
I am going to set my new computer up tomorrow. The computer I am using at present was installed and set up by someone else so this will be a great learning curve for me. Also I had Infinity installed by the engineer.
Is everything I need to install relating to my broadband available to download? What do I need altogether? I spoke to a BT chap on the phone and he said he would help by remote access. I am a bit nervous of this!
I need to ensure my computer is safe and secure and it all seems technically daunting. Norton security came with my Microsoft Office package. Is this better than McAfee (Net Protect Plus), do I need both? What about a key code scrambler (someone mentioned this to me). As you can see I need reassurance and help arghhhhhhh.
A step by step guide would be great!
Thanks
Solved!
Go to Solution.

It is best not to install any of the BT software, just connect your computer to the BT Home hub using an Ethernet cable, or by using the wireless key, if its a wireless connected computers.
See http://bt.custhelp.com/app/answers/detail/a_id/14964/~/getting-started-with-wireless
Using a direct cable connection is best, if you want to get maximum speed.
I would not allow anyone remote access, but if you have no choice, and cannot resolve the issue any other way, then make sure that it is as a direct result of you ringing BT, and not some random person ringing you at home, pretending to be from BT or even Microsoft.
Many people have been caught out by that type of call, and had their computer infected with spyware.
If you already have a trial version of Norton Security, then by all means use it until it expires, then uninstall it.
After that, you have the choice of using the free Microsoft Security Essentials, which is preferred by many forum members, or using BTs Netprotect which is free with some broadband packages. This has been known to make computers run more slowly though.
That is all you need.
If you have any problems, then please return here.
If you have any problems with BT Infinity, then please visit the Infinity board on this forum.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

Help with setting a MDX goal expression in SSAS

Our data is updated monthly and the last date of available data can be anywhere from 45-75 days behind. For example, data is current through 6/30/2014
as of 8/25/2014.
I have a Time dimension hierarchy named [Calendar] with [Year]>[Half Year]>[Quarter]>[Month]>[Date]
I have a measure, [Measures].[Fatalities] set as a calculated member.
I have a KPI with [Measures].[Fatalities] set as the Value Expression. My issue is with setting up the goal expression.
I am trying to set a goal expression that is a percent reduction for a 5-year baseline average (Year-7:Year-3). So for the current year (2014, with data through
June 2014), the goal would be a 20% reduction of the average of the Jan-Jun 2007, Jan-Jun 2008,Jan-Jun 2009,Jan-Jun 2010,Jan-Jun 2011.
I have set up the following MDX as the goal expression:
.8*((
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],7,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],6,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],5,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],4,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],3,[Time].[Calendar].CurrentMember))
)/5
The problem is that the goal is taking the entire year average at the year level of the Calendar hierarchy. For example, in the attached screenshot, the
Fatalities Goal would be empty when the fatalities is empty, and more importantly, the goal at the Year level of the Calendar hierarchy would only be the sum of Jan-Jun goal. The Fatalities Goal in this example should read 549.28 at the Calendar 2014
Year level and the status would still be green.
http://i.imgur.com/peHD9Wl.png

you might find this app interesting: http://ivolume.en.softonic.com/mac.

Please Help with Setting Up an iCloud Account with a PC

Friends,
I'm using a IBM ThinkPad W510 with Mozilla Firefox as my search engine, Thunderbird as my email program and I recently purchased an iPad 3 and own an iPod. I am very interested in using iCloud but short of finding an IT Engineer, I am in dire need of step by step help on how to set up iCloud on these three pieces of hardware. I'm willing to pay for the information if needed but as it looks now, after spending three nights and about 9 hours I don't think it's possible. My email address is [email protected] and I am unclear as to if I have to use .me or whatever Apples email options are. I really need help and it's stuff like this that really keep 30 year PC users from jumping the fence and going totally Apple which I may consider in the future after seeing Windows 8 in the fall. Please help me out.
With Great Respect and Needs,
Ed

iCloud Help
Creating an iCloud account- Frequently Asked Questions
Apple IDs and iCloud
iCloud: What version of Windows software am I using for iCloud?

Help with set up please

I have just bought a second airport xtreme card for my G5 powermac and now have this and the G5 imac wirelessly connected via a belkin F5D7630 router. Strangley I have noticed that the signal strength is weaker on my powermac compared with the Imac. I have checked the installation of the card and ensured that I have the external arial connected to the back on the computer. As I am typing this I have noticed that I have 2 bars showing on the menubar and the imac has 5 bars. These machines are in different rooms on the same floor and the router is in another room on the same floor.
I called Belkin and they said that I should change my settings to 10 half duplex. Apparently the airpport cards are set for 10 full duplex. Well, i don't know where I would make this change and whether the change is actually needed.
Does the signal level impact on the connection speed?
WHat does 'interface robustness' mean and should I have it ticked in the menu?
What is this 10 half duplex stuff about and how do I change it?
Please can someone help me on this one - It is most frustrating

"10 half duplex" applies to cabled ethernet network connections - not wireless network connections. This suggestion isn't of any relevance to your problem.
"Interference robustness" helps alleviate the effects of some types of radiofrequency interference. Don't enable this feature unless interference is known to be an issue. Are the any other wireless networks in range of yours (listed in the Mac's Airport menu)?
Double check the connection of the internal Airport antenna cable to the Airport Extreme card on the G5. Make sure the connector is FULLY seated, which can take some force to do properly.

Please Please help with set up

Similar Messages

Maybe you are looking for