Please, please suggest me, Its very Urgent for
Hi everyone,
Please suggest me the right Sound Card. I have bought SBLi've and I found that very essential functionalities for me are missing in this card, which were there in SBLi've "Value".
I have 3 requirments stated below.
. Sound Card using which, I will be able to change Each and every Parameters of Reverb effect. (like delay, early reflection etc.) to make a custom efx.
2. The custom efx could be assigned Only to a Selected Source, like efx set on the Microphone input only (and Not on the main Output).
3. The efx should be processed by the Hardware only (not software rendered), directly through the Chip.
The SBLIVE!"Value" handled all these 3 requirments, but with SBLi've24bit I found that these things have been completely removed from the chip. moreover it seems to process the efx using the software, the sound has a distorted noise.
Thanks.Message Edited by Deba on 05-06-2005 06:02 PM
Hi Sridhar,
Thanks for ur reply.
Seg5 is under Seg4 and
seg6 is under seg5.
BLOBE is just a string on the target side under node Segment4
Iam concanating all the fields in seg5 and seg6 and mapping into Single string "BLOBE" which is at the target side of node Segment4.
Source Target
Seg4 Seg4
_____seg5 (1:unbounded)
|_____seg6 (1:unbounded) |___BLOBE(1:unbounded)
Pls reply me if u need any clarification.
Regards
Vijaya.
Similar Messages
-
Hi sap gurus can u please improve the performance ,its very urgent :-sneha
REPORT ZFIR_GRIR_IPV
NO STANDARD PAGE HEADING
LINE-SIZE 120
MESSAGE-ID ZFI02.
TABLES: BSEG,BKPF.
TYPES: BEGIN OF A_FINAL,
BUKRS TYPE CHAR12,
HKONT_P TYPE CHAR18,
GJAHR TYPE CHAR11,
BELNR TYPE CHAR19,
BUDAT TYPE CHAR12,
WAERS TYPE CHAR8,
XBLNR TYPE CHAR20,
BLART TYPE CHAR13,
MONAT TYPE CHAR13,
DMBTR_P TYPE CHAR13,
KOSTL TYPE CHAR11,
PRCTR_P TYPE CHAR13,
HKONT_G TYPE CHAR18,
DMBTR_G TYPE CHAR13,
PRCTR_G TYPE CHAR13,
BUZID_G TYPE CHAR15,
END OF A_FINAL.
changes on 30 th may by dileep
TYPES: BEGIN OF IT_FINAL,
BUKRS TYPE BUKRS ,
HKONT TYPE HKONT,
BELNR TYPE BELNR_D,
DMBTR TYPE DMBTR ,
KOSTL TYPE KOSTL,
PRCTR TYPE PRCTR,
END OF IT_FINAL.
TYPES: BEGIN OF IT_FINAL1,
BUKRS TYPE BUKRS,
HKONT TYPE HKONT,
GJAHR TYPE GJAHR ,
BELNR TYPE BELNR_D,
BUDAT TYPE BUDAT,
WAERS TYPE WAERS ,
XBLNR TYPE XBLNR1,
BLART TYPE BLART,
MONAT TYPE MONAT,
DMBTR TYPE DMBTR,
KOSTL TYPE KOSTL,
PRCTR TYPE PRCTR,
END OF IT_FINAL1.
end of changes on 30 th may by dileep
TYPES: BEGIN OF P_FINAL,
BUKRS TYPE CHAR12,
DELIMITER_1 TYPE CHAR1,
HKONT_P TYPE CHAR18,
DELIMITER_2 TYPE CHAR1,
GJAHR TYPE CHAR11,
DELIMITER_3 TYPE CHAR1,
BELNR TYPE CHAR19,
DELIMITER_4 TYPE CHAR1,
BUDAT TYPE CHAR12,
DELIMITER_5 TYPE CHAR1,
WAERS TYPE CHAR8,
DELIMITER_6 TYPE CHAR1,
XBLNR TYPE CHAR20,
DELIMITER_7 TYPE CHAR1,
BLART TYPE CHAR13,
DELIMITER_8 TYPE CHAR1,
MONAT TYPE CHAR13,
DELIMITER_9 TYPE CHAR1,
DMBTR_P TYPE CHAR13,
DELIMITER_10 TYPE CHAR1,
KOSTL TYPE CHAR11,
DELIMITER_11 TYPE CHAR1,
PRCTR_P TYPE CHAR13,
DELIMITER_12 TYPE CHAR1,
HKONT_G TYPE CHAR18,
DELIMITER_13 TYPE CHAR1,
DMBTR_G TYPE CHAR13,
DELIMITER_14 TYPE CHAR1,
PRCTR_G TYPE CHAR13,
DELIMITER_15 TYPE CHAR1,
BUZID_G TYPE CHAR15,
END OF P_FINAL.
DATA: IT_BSEG TYPE STANDARD TABLE OF IT_FINAL INITIAL SIZE 0,
I_BSEG TYPE STANDARD TABLE OF IT_FINAL1 INITIAL SIZE 0,
I_FINAL TYPE STANDARD TABLE OF A_FINAL INITIAL SIZE 0 WITH HEADER LINE,
I_FINAL_P TYPE STANDARD TABLE OF P_FINAL INITIAL SIZE 0 WITH HEADER LINE,
W_FINAL_P TYPE P_FINAL,
W_BSEG1 TYPE BSEG,
WA_BSEG TYPE IT_FINAL OCCURS 0 WITH HEADER LINE,
W_BSEG TYPE IT_FINAL1 OCCURS 0 WITH HEADER LINE,
T_BSEG TYPE STANDARD TABLE OF BSEG INITIAL SIZE 0 WITH HEADER LINE,
W_FINAL TYPE A_FINAL,
F_YEAR TYPE BAPI0002_4-FISCAL_YEAR,
F_PERIOD TYPE BAPI0002_4-FISCAL_PERIOD,
RETURN1 TYPE BAPIRETURN1,
V_DATE TYPE CHAR8, " Date in YYYYMMDD format
V_PRESPATH TYPE STRING, " Path
V_APPPATH TYPE STRING, " Path
V_FILENAME(25) TYPE C, " File Name
V_PERIOD TYPE CHAR3, " Date for Posting Period
V_FSYEAR TYPE BDATJ, " Fiscal Year
L_TEXT TYPE CHAR1. " Hypen
CONSTANTS: C_TXT TYPE CHAR4 VALUE '.txt', " File Extension
C_TXT1 TYPE STRING VALUE 'txt', " File Type
C_FLAG_X TYPE CHAR1 VALUE 'X', " Flag
C_ASC TYPE FILETYPE VALUE 'ASC', " File type
C_DAT TYPE CHAR4 VALUE '.dat', " File Type
C_FLAG_1 TYPE CHAR1 VALUE '1', " Constant value
C_ZERO TYPE CHAR1 VALUE '0', " Constant
C_GLD(10) TYPE C VALUE 'GRIR021S', " Constant in file Path
C_DIR TYPE CHAR3 VALUE 'C:\', " Presentation Server path
C_FLAG_12 TYPE CHAR2 VALUE '12', " Constant value
C_PCFILE TYPE STRING VALUE 'PC File',
C_DELIMITER TYPE C VALUE '|'.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
*--- Selection Criteria
SELECT-OPTIONS: S_BUKRS FOR BSEG-BUKRS DEFAULT '012T', " Company Code
S_HKONT FOR BSEG-HKONT OBLIGATORY DEFAULT '4505001',
S_GJAHR FOR BKPF-GJAHR DEFAULT SY-DATUM+0(4),
S_MONAT FOR BKPF-MONAT DEFAULT SY-DATUM+4(2),
S_BELNR FOR BSEG-BELNR ,
S_BUDAT FOR BKPF-BUDAT ,
S_PRCTR FOR BSEG-PRCTR OBLIGATORY DEFAULT '12TOTH00',
S_BLART FOR BKPF-BLART OBLIGATORY DEFAULT 'RE'.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
*--- Radio Buttons for chose the PC Path or App.. Server Path
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:
RB_PFILE RADIOBUTTON GROUP RAD2 DEFAULT 'X' USER-COMMAND UCOMM1.
SELECTION-SCREEN COMMENT 5(27) TEXT-002 FOR FIELD RB_PFILE.
PARAMETERS:
P_PFILE LIKE RLGRAP-FILENAME LOWER CASE.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:
RB_AFILE RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 5(27) TEXT-003 FOR FIELD RB_AFILE.
PARAMETERS:
P_AFILE LIKE RLGRAP-FILENAME LOWER CASE. " Path for AS
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PFILE.
*-- Select File name with Dialog Box
PERFORM SUB_GET_FILENAME CHANGING P_PFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_AFILE.
*--- Attach F4 HELP CORRESPONDING TO THE FIELD
PERFORM SUB_AP_F4.
AT SELECTION-SCREEN OUTPUT.
*--Modify screen parameters
PERFORM SUB_MODIFY_SCREEN.
AT SELECTION-SCREEN.
*--- Selection Screen validations for Company Code
PERFORM SUB_VALIDATION_BUKRS.
*--- Selection Screen validations for Chart of Accounts
PERFORM SUB_VALIDATION_HKONT.
*--- Selection Screen validations Fiscal Year
PERFORM SUB_VALIDATION_GJAHR.
*--- Selection Screen validations for Peiod
PERFORM SUB_VALIDATION_MONAT.
*--- Selection Screen validations for Company Code
PERFORM SUB_VALIDATION_BELNR.
*--- Selection Screen validations for Chart of Accounts
PERFORM SUB_VALIDATION_BUDAT.
*--- Selection Screen validations Fiscal Year
PERFORM SUB_VALIDATION_PRCTR.
*--- Selection Screen validations for Peiod
PERFORM SUB_VALIDATION_BLART.
START-OF-SELECTION
START-OF-SELECTION.
*--- Check whether filepath/name have been entered in the sel screen
PERFORM SUB_CHECK_FILEPATH.
*--- Prepare Final Internal Table.
PERFORM SUB_PREPARE_FINAL.
*--- Download data.
PERFORM SUB_DOWNLOAD_DATA .
*& Form sub_get_filename
text
<--P_PFILE Presentation server File name
FORM SUB_GET_FILENAME CHANGING P_FILE TYPE C.
DATA : L_FILENAME TYPE STRING, " For File Name
L_PATH TYPE STRING, " For Directory
L_FULLPATH TYPE STRING. " Full path
*--- For File Open Dialog Box
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
WINDOW_TITLE = C_PCFILE " Window Title
DEFAULT_EXTENSION = C_TXT1 " File Extn
PROMPT_ON_OVERWRITE = C_FLAG_X " Over write
CHANGING
FILENAME = L_FILENAME " File Name
PATH = L_PATH " File Path
FULLPATH = L_FULLPATH " Full Path
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
OTHERS = 4.
IF SY-SUBRC NE 0.
*--- Error in opening the file
MESSAGE E000.
ELSE.
CONCATENATE L_PATH
L_FILENAME
INTO P_FILE.
V_PRESPATH = L_PATH.
ENDIF.
ENDFORM. " sub_get_filename
*& Form sub_ap_f4
f4 help attched with application server
FORM SUB_AP_F4 .
*--- FM for to get the Application Server Path
IF RB_AFILE = C_FLAG_X.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
EXPORTING
DIRECTORY =
FILEMASK = C_ASC " File Extn
IMPORTING
SERVERFILE = P_AFILE " File Path
EXCEPTIONS
CANCELED_BY_USER = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
*--- Error in opening the file
MESSAGE E000.
ENDIF.
ENDIF.
ENDFORM. " sub_ap_f4
*& Form sub_modify_screen
text
--> p1 text
<-- p2 text
FORM SUB_MODIFY_SCREEN .
*--- Selection screen Modifications
IF RB_PFILE = C_FLAG_X.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_PFILE' OR
SCREEN-NAME = '%_P_PFILE_%_APP_%-TEXT'.
SCREEN-ACTIVE = C_FLAG_1.
CONCATENATE C_DIR C_GLD V_DATE SY-UZEIT(4) C_TXT INTO P_PFILE.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_PFILE' OR
SCREEN-NAME = '%_P_PFILE_%_APP_%-TEXT'.
SCREEN-ACTIVE = C_ZERO.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF RB_AFILE = C_FLAG_X.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_AFILE' OR
SCREEN-NAME = '%_P_AFILE_%_APP_%-TEXT'.
SCREEN-ACTIVE = C_FLAG_1.
CONCATENATE '/Solectron/Data/' C_GLD V_DATE SY-UZEIT(4) C_DAT
INTO P_AFILE.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_AFILE' OR
SCREEN-NAME = '%_P_AFILE_%_APP_%-TEXT'.
SCREEN-ACTIVE = C_ZERO.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF RB_PFILE = C_FLAG_X.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_PFILE'.
SCREEN-ACTIVE = C_FLAG_1.
ENDIF.
IF SCREEN-NAME = 'P_AFILE'.
SCREEN-ACTIVE = C_ZERO.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF RB_AFILE = C_FLAG_X.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_PFILE'.
SCREEN-ACTIVE = C_ZERO.
ENDIF.
IF SCREEN-NAME = 'P_AFILE'.
SCREEN-ACTIVE = C_FLAG_1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDFORM. " sub_modify_screen
*& Form sub_validation_bukrs
Validation For Company Code
FORM SUB_VALIDATION_BUKRS .
DATA: L_BUKRS TYPE BUKRS. " Company Code
IF S_BUKRS IS NOT INITIAL.
IF S_BUKRS-HIGH IS NOT INITIAL AND S_BUKRS-LOW IS INITIAL.
MESSAGE E006.
ELSE.
*--- Validation for chart of accounts
SELECT BUKRS " Company Code
FROM T001 UP TO 1 ROWS
INTO L_BUKRS
WHERE BUKRS IN S_BUKRS.
ENDSELECT.
IF SY-SUBRC NE 0.
*--- Invalid Company code
MESSAGE E001.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_bukrs
*& Form sub_validation_hkont
Validation For General Ledger Account
FORM SUB_VALIDATION_HKONT .
DATA: L_HKONT TYPE HKONT. " General Ledger Account
IF S_HKONT IS INITIAL.
MESSAGE E002.
ELSE.
IF S_HKONT-HIGH IS NOT INITIAL AND S_HKONT-LOW IS INITIAL.
MESSAGE E006.
ELSE.
*--- Validation for chart of accounts
SELECT SAKNR " General Ledger Account
FROM SKA1 UP TO 1 ROWS
INTO L_HKONT
WHERE SAKNR IN S_HKONT AND KTOPL = '1SLR'.
ENDSELECT.
IF SY-SUBRC NE 0.
*--- Invalid General Ledger Account
MESSAGE E003.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_hkont
*& Form sub_validation_gjahr
Validation For Fiscal Year
FORM SUB_VALIDATION_GJAHR .
DATA: L_GJAHR TYPE GJAHR. " Fiscal Year
IF S_GJAHR IS NOT INITIAL.
IF S_GJAHR-HIGH IS NOT INITIAL AND S_GJAHR-LOW IS INITIAL.
MESSAGE E006.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_gjahr
*& Form sub_validation_monat
Validation For Fiscal period
FORM SUB_VALIDATION_MONAT .
DATA: L_MONAT TYPE MONAT. " Fiscal period
IF S_MONAT IS NOT INITIAL.
IF S_MONAT-LOW LE C_ZERO.
*--- Invalid Fiscal Period
MESSAGE E006.
ENDIF.
IF S_MONAT-HIGH GT C_FLAG_12.
*--- Invalid Fiscal Period
MESSAGE E007.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_monat
*& Form sub_validation_belnr
Validation For Accounting Document Number
FORM SUB_VALIDATION_BELNR .
DATA: L_BELNR TYPE BELNR_D. " Accounting Document Number
IF S_BELNR IS NOT INITIAL.
IF S_BELNR-HIGH IS NOT INITIAL AND S_BELNR-LOW IS INITIAL.
MESSAGE E006.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_belnr
*& Form sub_validation_budat
Validation For Posting Date
FORM SUB_VALIDATION_BUDAT .
DATA: L_BUDAT TYPE BUDAT. " Posting Date
IF S_BUDAT IS NOT INITIAL.
IF S_BUDAT-HIGH IS NOT INITIAL AND S_BUDAT-LOW IS INITIAL.
MESSAGE E006.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_budat
*& Form sub_validation_prctr
Validation For Profit Center
FORM SUB_VALIDATION_PRCTR .
DATA: L_PRCTR TYPE PRCTR. " Profit Center
IF S_PRCTR IS INITIAL.
MESSAGE E010.
ELSE.
IF S_PRCTR-HIGH IS NOT INITIAL AND S_PRCTR-LOW IS INITIAL.
MESSAGE E006.
ELSE.
*--- Validation for chart of accounts
SELECT PRCTR " Profit Center
FROM CEPC UP TO 1 ROWS
INTO L_PRCTR
WHERE PRCTR IN S_PRCTR.
ENDSELECT.
IF SY-SUBRC NE 0.
*--- Invalid Profit Center
MESSAGE E011.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_prctr
*& Form sub_validation_blart
Validation For Document type
FORM SUB_VALIDATION_BLART .
DATA: L_BLART TYPE BLART. " Document type
IF S_BLART IS INITIAL.
MESSAGE E012.
ELSE.
IF S_BLART-HIGH IS NOT INITIAL AND S_BLART-LOW IS INITIAL.
MESSAGE E006.
ENDIF.
ENDIF.
ENDFORM. " sub_validation_blart
*& Form sub_check_filepath
Check user input for initial filename
FORM SUB_CHECK_FILEPATH .
IF RB_PFILE = C_FLAG_X.
IF P_PFILE IS INITIAL.
*--- The Local File Path can not be Empty
MESSAGE I014.
LEAVE LIST-PROCESSING.
ENDIF.
ELSEIF RB_AFILE = C_FLAG_X.
IF P_AFILE IS INITIAL.
*--- The App Server File Path can not be Empty
MESSAGE I015.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
ENDFORM. " sub_check_filepath
*& Form sub_prepare_final
append the required output data in to the internal table.
FORM SUB_PREPARE_FINAL.
changes on 30 th may by dileep
SELECT * FROM BSEG INTO TABLE I_BSEG WHERE HKONT IN S_HKONT AND "G/L Account
GJAHR IN S_GJAHR AND
PRCTR IN S_PRCTR AND "Profit Center
BLART IN S_BLART . "Document Type
SELECT BUKRS
HKONT
BELNR
DMBTR
KOSTL
PRCTR
FROM BSEG INTO TABLE IT_BSEG WHERE HKONT IN S_HKONT AND "G/L Account
PRCTR IN S_PRCTR. "Profit Center
LOOP AT IT_BSEG INTO WA_BSEG.
SELECT SINGLE GJAHR
BUDAT
WAERS
XBLNR
BLART
MONAT
INTO (W_BSEG-GJAHR,W_BSEG-BUDAT,W_BSEG-WAERS,W_BSEG-XBLNR,W_BSEG-BLART,W_BSEG-MONAT)
FROM BKPF WHERE BELNR = W_BSEG-BELNR AND
GJAHR IN S_GJAHR AND
BLART IN S_BLART . "Document Type
MOVE WA_BSEG-BUKRS TO W_BSEG-BUKRS.
MOVE WA_BSEG-HKONT TO W_BSEG-HKONT.
MOVE WA_BSEG-BELNR TO W_BSEG-BELNR.
MOVE WA_BSEG-DMBTR TO W_BSEG-DMBTR.
MOVE WA_BSEG-KOSTL TO W_BSEG-KOSTL.
MOVE WA_BSEG-PRCTR TO W_BSEG-PRCTR.
APPEND W_BSEG TO I_BSEG.
ENDLOOP.
changes on 30 th may by dileep
IF S_BUKRS IS NOT INITIAL.
SORT I_BSEG BY BUKRS ASCENDING.
DELETE I_BSEG WHERE NOT BUKRS IN S_BUKRS.
ENDIF.
IF S_MONAT IS NOT INITIAL.
SORT I_BSEG BY GJAHR MONAT ASCENDING.
IF S_MONAT-HIGH IS NOT INITIAL AND S_MONAT-LOW IS NOT INITIAL.
DELETE I_BSEG WHERE MONAT < S_MONAT-LOW OR MONAT > S_MONAT-HIGH.
ENDIF.
IF S_MONAT-HIGH IS INITIAL AND S_MONAT-LOW IS NOT INITIAL.
DELETE I_BSEG WHERE MONAT NE S_MONAT-LOW.
ENDIF.
ENDIF.
IF S_BELNR IS NOT INITIAL.
SORT I_BSEG BY BELNR ASCENDING.
DELETE I_BSEG WHERE NOT BELNR IN S_BELNR.
ENDIF.
IF S_BUDAT IS NOT INITIAL.
SORT I_BSEG BY BUDAT ASCENDING.
DELETE I_BSEG WHERE NOT BUDAT IN S_BUDAT.
ENDIF.
LOOP AT I_BSEG INTO W_BSEG.
MOVE W_BSEG-BUKRS TO W_FINAL-BUKRS.
MOVE W_BSEG-HKONT TO W_FINAL-HKONT_P.
MOVE W_BSEG-GJAHR TO W_FINAL-GJAHR.
MOVE W_BSEG-BELNR TO W_FINAL-BELNR.
MOVE W_BSEG-BUDAT TO W_FINAL-BUDAT.
MOVE W_BSEG-WAERS TO W_FINAL-WAERS.
MOVE W_BSEG-XBLNR TO W_FINAL-XBLNR.
MOVE W_BSEG-BLART TO W_FINAL-BLART.
MOVE W_BSEG-MONAT TO W_FINAL-MONAT.
MOVE W_BSEG-DMBTR TO W_FINAL-DMBTR_P.
MOVE W_BSEG-KOSTL TO W_FINAL-KOSTL.
MOVE W_BSEG-PRCTR TO W_FINAL-PRCTR_P.
SELECT SINGLE * FROM BSEG INTO W_BSEG1 WHERE BELNR = W_BSEG-BELNR AND "Document Type
BUZID = 'W' .
IF SY-SUBRC = 0.
MOVE W_BSEG1-HKONT TO W_FINAL-HKONT_G.
MOVE W_BSEG1-DMBTR TO W_FINAL-DMBTR_G.
MOVE W_BSEG1-PRCTR TO W_FINAL-PRCTR_G.
MOVE W_BSEG1-BUZID TO W_FINAL-BUZID_G.
ELSE.
EXIT.
ENDIF.
APPEND W_FINAL TO I_FINAL.
SORT I_FINAL BY BELNR ASCENDING.
ENDLOOP.
ENDFORM. " sub_prepare_final
*& Form sub_download_data
Download data
FORM SUB_DOWNLOAD_DATA .
DATA : V_PRD(2) TYPE N.
IF RB_PFILE = C_FLAG_X.
*--- Downloading To presentation server
V_PRESPATH = P_PFILE.
PERFORM SUB_DOWNLOAD_PRESSERVER.
ELSEIF RB_AFILE = C_FLAG_X.
*--- Downloading To Application server in Auto Mode
V_APPPATH = P_AFILE.
PERFORM SUB_DOWNLOAD_APPSERVER.
ENDIF.
ENDFORM. " sub_download_data
*& Form sub_download_presserver
text
FORM SUB_DOWNLOAD_PRESSERVER.
DATA: MESSAGE TYPE STRING.
IF I_FINAL[] IS INITIAL.
MESSAGE I016.
EXIT.
ELSE.
W_FINAL_P-BUKRS = 'Company Code'.
W_FINAL_P-DELIMITER_1 = '|'.
W_FINAL_P-HKONT_P = 'G/L Account Number'.
W_FINAL_P-DELIMITER_2 = '|'.
W_FINAL_P-GJAHR = 'Fiscal Year'.
W_FINAL_P-DELIMITER_3 = '|'.
W_FINAL_P-BELNR = 'A/c Document Number'.
W_FINAL_P-DELIMITER_4 = '|'.
W_FINAL_P-BUDAT = 'Posting Date' .
W_FINAL_P-DELIMITER_5 = '|'.
W_FINAL_P-WAERS = 'Currency'.
W_FINAL_P-DELIMITER_6 = '|'.
W_FINAL_P-XBLNR = 'Ref. Document Number'.
W_FINAL_P-DELIMITER_7 = '|'.
W_FINAL_P-BLART = 'Document Type'.
W_FINAL_P-DELIMITER_8 = '|'.
W_FINAL_P-MONAT = 'Fiscal Period'.
W_FINAL_P-DELIMITER_9 = '|'.
W_FINAL_P-DMBTR_P = 'Amount'.
W_FINAL_P-DELIMITER_10 = '|'.
W_FINAL_P-KOSTL = 'Cost Center'.
W_FINAL_P-DELIMITER_11 = '|'.
W_FINAL_P-PRCTR_P = 'Profit Center'.
W_FINAL_P-DELIMITER_12 = '|'.
W_FINAL_P-HKONT_G = 'G/L Account Number'.
W_FINAL_P-DELIMITER_13 = '|'.
W_FINAL_P-DMBTR_G = 'Amount'.
W_FINAL_P-DELIMITER_14 = '|'.
W_FINAL_P-PRCTR_G = 'Profit Center'.
W_FINAL_P-DELIMITER_15 = '|'.
W_FINAL_P-BUZID_G = 'Line Item Id'.
APPEND W_FINAL_P TO I_FINAL_P.
LOOP AT I_FINAL INTO W_FINAL.
W_FINAL_P-BUKRS = W_FINAL-BUKRS.
W_FINAL_P-DELIMITER_1 = '|'.
W_FINAL_P-HKONT_P = W_FINAL-HKONT_P.
W_FINAL_P-DELIMITER_2 = '|'.
W_FINAL_P-GJAHR = W_FINAL-GJAHR.
W_FINAL_P-DELIMITER_3 = '|'.
W_FINAL_P-BELNR = W_FINAL-BELNR.
W_FINAL_P-DELIMITER_4 = '|'.
W_FINAL_P-BUDAT = W_FINAL-BUDAT .
W_FINAL_P-DELIMITER_5 = '|'.
W_FINAL_P-WAERS = W_FINAL-WAERS.
W_FINAL_P-DELIMITER_6 = '|'.
W_FINAL_P-XBLNR = W_FINAL-XBLNR.
W_FINAL_P-DELIMITER_7 = '|'.
W_FINAL_P-BLART = W_FINAL-BLART.
W_FINAL_P-DELIMITER_8 = '|'.
W_FINAL_P-MONAT = W_FINAL-MONAT.
W_FINAL_P-DELIMITER_9 = '|'.
W_FINAL_P-DMBTR_P = W_FINAL-DMBTR_P.
W_FINAL_P-DELIMITER_10 = '|'.
W_FINAL_P-KOSTL = W_FINAL-KOSTL.
W_FINAL_P-DELIMITER_11 = '|'.
W_FINAL_P-PRCTR_P = W_FINAL-PRCTR_P.
W_FINAL_P-DELIMITER_12 = '|'.
W_FINAL_P-HKONT_G = W_FINAL-HKONT_G.
W_FINAL_P-DELIMITER_13 = '|'.
W_FINAL_P-DMBTR_G = W_FINAL-DMBTR_G.
W_FINAL_P-DELIMITER_14 = '|'.
W_FINAL_P-PRCTR_G = W_FINAL-PRCTR_G.
W_FINAL_P-DELIMITER_15 = '|'.
W_FINAL_P-BUZID_G = W_FINAL-BUZID_G.
APPEND W_FINAL_P TO I_FINAL_P.
CLEAR : W_FINAL_P, W_FINAL.
ENDLOOP.
ENDIF.
*---Downloading data to file on Presentation Server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = V_PRESPATH
FILETYPE = 'ASC'
TABLES
DATA_TAB = I_FINAL_P
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
*-- File can not be opened successfully
IF SY-SUBRC NE 0.
IF SY-BATCH EQ C_FLAG_X. " Stop Processing
MESSAGE E017. " File could not be opened
ELSE.
MESSAGE I017. " File could not be opened
LEAVE LIST-PROCESSING.
ENDIF.
ELSE.
CONCATENATE 'Data Successfully downloaded to the Specified Location' V_PRESPATH INTO MESSAGE SEPARATED BY SPACE.
MESSAGE MESSAGE TYPE 'S'.
ENDIF.
MODIFY SCREEN.
ENDFORM. " sub_download_presserver
*& Form sub_download_appserver
text
FORM SUB_DOWNLOAD_APPSERVER .
DATA: V_FILE TYPE STRING, " String
P_DMBTR TYPE CHAR20,
G_DMBTR TYPE CHAR20,
MESSAGE1 TYPE STRING.
IF I_FINAL[] IS INITIAL.
IF SY-BATCH EQ C_FLAG_X.
*--- File contains no data
MESSAGE E016 .
ELSE.
*--- File contains no data
MESSAGE I016 .
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
*--- To Open The file in Application Server
OPEN DATASET V_APPPATH FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC NE 0.
*--- Display error message: "Could not open file"
IF SY-BATCH EQ C_FLAG_X.
*--- File contains no data
MESSAGE E016 .
ELSE.
*--- File contains no data
MESSAGE I016 .
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
*--- Perform for building the Report header
CONCATENATE
'COMPANY_CODE'
'G/L_ACCOUNT_NUMBER'
'FISCAL_YEAR'
'A/C_DOCUMENT_NUMBER'
'POSTING_DATE'
'CURRENCY'
'REF_DOCUMENT_NUMBER'
'DOCUMENT_TYPE'
'FISCAL_PERIOD'
'AMOUNT'
'COSTCENTER'
'PROFIT_CENTER'
'G/L_ACCOUNT_NUMBER'
'AMOUNT'
'PROFIT_CENTER'
'LINE_ITEM_ID'
INTO V_FILE SEPARATED BY C_DELIMITER.
TRANSFER V_FILE TO V_APPPATH.
*--- Transfer the data to application Server
LOOP AT I_FINAL INTO W_FINAL.
P_DMBTR = W_FINAL-DMBTR_P.
G_DMBTR = W_FINAL-DMBTR_G.
CONCATENATE
W_FINAL-BUKRS
W_FINAL-HKONT_P
W_FINAL-GJAHR
W_FINAL-BELNR
W_FINAL-BUDAT
W_FINAL-WAERS
W_FINAL-XBLNR
W_FINAL-BLART
W_FINAL-MONAT
P_DMBTR
W_FINAL-KOSTL
W_FINAL-PRCTR_P
W_FINAL-HKONT_G
G_DMBTR
W_FINAL-PRCTR_G
W_FINAL-BUZID_G
INTO V_FILE SEPARATED BY C_DELIMITER.
TRANSFER V_FILE TO V_APPPATH.
IF SY-SUBRC NE 0.
Display error message: "Data could not be written at the location"
MESSAGE 'Data could not be written at the location' TYPE 'I'.
EXIT.
ENDIF.
CLEAR V_FILE.
ENDLOOP.
CLOSE DATASET V_APPPATH.
IF SY-SUBRC NE 0.
Display error message: "File could not be closed"
MESSAGE 'File could not be closed' TYPE 'I'.
EXIT.
ELSE.
CONCATENATE 'Data Successfully downloaded to the Specified Location' V_APPPATH INTO MESSAGE1 SEPARATED BY SPACE.
MESSAGE MESSAGE1 TYPE 'S'.
ENDIF.
ENDFORM. " sub_download_appserverIt may be better to summarize what you do in the steps, thereby avoiding such a long coding posted here.
This may be helping experts to pick the wrong spot to fix it. -
SQL SELECT Query Help ..Please its very Urgent!!
Hi All,
I am having Oracle Database whice is storing 1000's of records daily.
I need to select some information based on date and time.
I am having two coloumns for Date and time. The first column(testDate) of type Date stores date as MM/DD/YY format and the second column(testTime)of type Numeric stores the time in seconds.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
How can i write a SELECT Query to get the records of specific date and seconds to next day specific date and seconds.I mean i want all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
If any one helps me in this regard iam very thank full to them.Its very urgent for me.
ThanksHi m7nra,
I used the query as
SELECT * FROM table
WHERE testDate + (testTime/(24*60*60)) BETWEEN TO_DATE('MM/DD/YYYY','12.11.2002') AND TO_DATE('MM/DD/YYYY','14.11.2002')
its giving DATE FORMAT NOT RECOGNIZED error.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
infact i need all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
Please help me to find a full query beacuse iam very new to Oracle.
Thanks,
S R Mannava -
Please help me in creating and scheduling jobs. Its very urgent.
RDBMS: Oracle 9.2.0.4
OS: win2k
OWB Client: 9.2.0.2.8
OWB Repository: 9.2.0.2.0
Hi,
I have created a "process workflow" using OWB and deployed it successfully. Now, I would like to schedule this process. I have installed management server and tried to schedule it but all in vain. I am not able to understand anything. I have read "oracle administrator pdf" and couldnt understand anything. Please dont advise me to read any notes or pdf's because I have tried a lot and was not able to figure out the configuration.
I have a target database named "TARGET". I would like to schedule the workflow process I have created. I am not able to understand preferred credentials and how to execute the XML script generated by the "process workflow". Please help me coz its very urgent.
-AdityaWhy dont you try this? I found it after few tries,
In the create job dialog box
under General
for Override Node Preferred Credentials for entire job
username and password should be the NT or Unix
login where your Runtime database Server reside.
under Parameter
for Override preferred credentials
username and password should be of your runtime
repository user
Regards,
Shree -
Open items for purchase order its very urgent
hi
my requirement is to write extract program for purchase order(me21) to extract only open items.
please provide sample code its very urgent.
thanks in advance.
points will be rewarded.
thanks
hari prasad reddycheck the below report :
REPORT ZMM_OPEN_PO_REPORT no standard page heading
line-size 255
message-id zwave.
======================================================================
Program Name : ZMM_OPEN_PO_REPORT *
Description : This report displays all Open PO Items and output *
would be PO Number,Material number and so on *
Author : Seshu *
Date : 01/24/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
01/24/07| Seshu | DEVK921979 | Initial *
D A T A D E C L A R A T I O N P A R T ***
type-pools
type-pools : slis.
Tables
tables : ekko, " Purchase order Header
ekpo, " Purchase order Item
marc. " Material with Plant data
Internal table for output.
data : begin of i_output occurs 0,
ebeln like ekko-ebeln,
matnr like ekpo-matnr,
end of i_output.
ALV Data declaration.
data : v_repid like sy-repid.
ALV Function Module Variables
DATA: gs_layout type slis_layout_alv,
g_exit_caused_by_caller,
gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
gs_print type slis_print_alv,
gt_events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
g_status_set type slis_formname value 'PF_STATUS_SET',
g_user_command type slis_formname value 'USER_COMMAND',
g_top_of_page type slis_formname value 'TOP_OF_PAGE',
g_top_of_list type slis_formname value 'TOP_OF_LIST',
g_end_of_list type slis_formname value 'END_OF_LIST',
g_variant LIKE disvariant,
g_save(1) TYPE c,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Ranges
ranges r_eindt for eket-eindt.
initialization.
v_repid = sy-repid.
start-of-selection.
Get the data from EKKO ,EKPO and MARC Table
perform get_data_tables.
end-of-selection.
display the data in the form of ALV
perform display_data.
*& Form get_data_tables
Get the data from EKKO,EKPO and MARC Table
FORM get_data_tables.
clear : i_output.
refresh : i_output.
fill the dates in ranges
r_eindt-low = sy-datum - 7.
r_eindt-high = sy-datum + 14.
r_eindt-option = 'BT'.
r_eindt-sign = 'I'.
append r_eindt.
Get the data from EKKO,EKPO and EKET Tables
select aebeln bmatnr into table i_output
from ekko as a inner join
ekpo as b on aebeln = bebeln
inner join marc as c on cmatnr = bmatnr
inner join mara as d on dmatnr = bmatnr
inner join eket as e on eebeln = aebeln
and eebelp = bebelp
where c~beskz = 'E'
and c~werks = '1000'
and d~mtart = 'FERT'
and b~loekz = space
and b~elikz = space
and e~eindt in r_eindt.
if sy-subrc ne 0.
message e000(zwave) with 'No open purchase order found'.
endif.
ENDFORM. " get_data_tables
*& Form display_data
text
FORM display_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = gr_layout_bck
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = g_save
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Purchase order number
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-ref_fieldname = 'EBELN'.
LS_FIELDCAT-ref_tabname = 'EKKO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Purchase Order'.
ls_fieldcat-seltext_M = 'Purchase Order'.
ls_fieldcat-seltext_S = 'Purchase Order'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'EKPO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init -
Hi all,
Its very urgent for me to develop RTF template so please any one have templates for the following reports.
1.AR invoice.
2.Customer Statements.
3.Dunning Letter Print.
please any one have templates for the above reports please send immediately and it will be great helpful for me. my mail id is [email protected]
Thanks and Regards
PrabuHi Ratnesh/Prabhu
I am working on AR Invoice Report. can anybody send me the Template pls.
my yahoo id is [email protected] along with source code.
Ratnesh: I have some issues with this report
We have seeded reports in Oracle apps. Lets take an example of a purchase order report. Say the seeded out-of-the-box report has the following information:
PO number, PO details
I can go ahead and use the template builder and create a nice looking report with that information.
Now, lets say that I want to display the supplier name in my purchase order report. Since the seeeded purchase order report does not have the supplier name (it is not there in the xml generated by the standard out-of-the-box report), the only way I can display the supplier name on the report is by querying up the supplier table and getting that information. I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information (the supplier name in this example) AFTER the xml has been generated and BEFORE the template is applied ?
My Actual requirement is :
I have the same requirement to develop AR Invoice Report in XML publisher, actually it was developed using Optio Layout.my issue is the actual AR Invoice RDF contains 20 records and it showing the 20 recodes when we run that program (concurrent program output) after that while printing this report uisng the OPTIO layout (The Optio system is fetching some more records (10 records)) it printing total 30 records. i mean here the OPTIO is handling some pl/sql code i guess..
so now how we can handle this requirement using XMLP.I am using RTF Templates with 5.6.2 v. Is it possible to do the same manner how the OPTIO was doing. Is this possible with any other Templates ?. or we need to customize the RDF itself ? .but I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information AFTER the xml has been generated and BEFORE the template is applied ?
I really appriciate u r replay..
Thanks,
Madhu -
Encrypting and Decrypting Data(Its Very Urgent, Please Help.)
Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.VIs this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C. -
How to enable RFC and how to use it in Report..please tell its very urgent
Dear Techie's,
Please tell its very urgent..
How to enable RFC and how to use it in Report. ??
Virendrahi,
pls chk any of these links.
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
rgds
Anver -
I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.
Thank youUse the backup you make to iCloud or a computer.
iTunes: About iOS backups - http://support.apple.com/kb/HT4946 -
my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Very Urgent for AR module XMLP templates
Hi,
I am very new to XMLP reports and now i need to work on customer statement and AR invoice reports.
my client expecting layout for approval.so i need to design layout mapping with xml source code.
pls any of u have layouts and xml source code for the above 2 reports.
its very urgent
i am using xmlp 5.6.2 and oracle apps 11.5.10
Please help immediately and it will be very greathelp from ur side.
Regards
RAMSIVAHi
was anyone able to provide a layout for the ar customer statement, i just started working on this for a client. -
Does any body Know how to connect thumb device to JMF
i want the code please send it to me
very urgent
Advance ThanksHi,
You can create a new item under that table region and changed its style as MessageTextInput or MessageStyledText depending on your requirement and associate it with transient attribute or any other attribute of VO for which you want it to associate.
For old one you can simply delete that field in OAF table region and in VO,you can edit VO by movinf that field by arrow sign. -
Contains invalid characters its very urgent
Hi,
I am working production system for master data full load address neumebr attributes. error is
Value 'R GARCIA LORCA, 301 LOJA 40 ' for characteristic 0STREET60 contains invalid charac RRSV 7.
Please help how to find which char has invalid char.please help its very urgent.
Thanks
SumanthI don't see any invalid char there, I don't think it is displaying all the char which was passed to the data target. There might be more, so go to the specific record in psa and see if there is any. If there is non, check your rskc setting in your system. It should be ALL CAPITAL.
Thanks
Wond -
Prb in understanding fields of VBAK(ITS VERY URGENT)
HI,
Can u tell me, whats the diff. bet ORDER TYPE & SALES DOC CATEGORY.
vbtyp & auart of vbak table
is VBTYP = 'H' only dependent on AUART = 'ZRE'
ZRE = RMA Returns...
Its very urgent.......
Regards,
Parvez.Hi Parwez,
See AUART - is the Order Type which defines that it can a standard order ,Return Order ( ZRE) ,Order without charge ,Credit Memo ,Debit Memo.
The sales document type determines how the system processes the sales
document. For example, depending on the sales document type, the syste
determines which screens to present and which data to ask you for.
While SALES DOC CATEGORY VBTYP indicates it is a conctract ,sales order ,return order ,Purchase Order ,Schedule Agreement .
A classification for the different types of documents that you can
process in the sales and distribution system (for example: quotations,
sales orders, deliveries, and invoices).
The document category determines how the system stores and keeps track
of document data. It enables the system to provide you with status
information about delivery processing, billing, and documents that are
used for reference (for example, inquiries and quotations).
A Inquiry
B Quotation
C Order
D Item proposal
E Scheduling agreement
F Scheduling agreement with external service agentI Order w/o charge
J Delivery
K Credit memo request
L Debit memo request
M Invoice
N Invoice cancellation
O Credit memo
P Debit memo
Q WMS transfer order
R Goods movement
S Credit memo cancellation
T Returns delivery for order
U Pro forma invoice
V Purchase order
W Independent reqts plan
X Handling unit
0 Master contract
1 Sales activities (CAS)
2 External transaction
3 Invoice list
4 Credit memo list
5 Intercompany invoice
6 Intercompany credit memo
7 Delivery/shipping notification
8 Shipment
a Shipment costs
c Unverified delivery
e Allocation table
g Rough Goods Receipt (only IS-Retail)
h Cancel goods issue
i Goods receipt
j JIT call
r TD Transport (only IS-Oil)
s Load confirmation, reposting (only IS-Oil)
t Gain / loss (only IS-Oil)
u Reentry into storage (only IS-Oil)
v 2-step Goods receipt (only IS-Oil)
w Reservation (only IS-Oil)
x Load confirmation, goods receipt (only IS-Oil)
$ (AFS)
Please Reward if useful . -
Its very urgent:how to insert data into database tables
Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PMHi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap
Maybe you are looking for
-
Hi I am trying to install my apps through Adobe Creative Cloud Desktop and all I'm getting is 'Download Error: Please try again or Contact Support'. I don't have any support number, or anything like that. If I try to reload, it doesn't do anything.
-
IPad 3 charging v e r y slow. What to do??
I have the new iPad3;, and upgraded to the latest software. It charges v e r y slow, about 5%/hr. Is this a software or hardware issue, and what to do about it? Regards Firak
-
HT5868 ipad trust computer failure -- still not recognizing ipad (or iphone either)
After upgrading itunes, intunes no longer recognizes ipad or iphone. "Trust computer" comes up on both ipad and iphone , but still not recognized.
-
Growing query size while appending last query.
Hi! I've got few blocks on my ORACLE FORMS form. Blocks A and B are connected by the master-detail relation. I've got table of records from B and above the table I've got buttons which sort this table. It's done by setting order by clause and then ca
-
since I update Firefox 8 I can't see the other pictures in this website, only I can see in ie explorer or using Firefox in my Mac, what I need to fix this problem?