Please tell me how to connect with FCoE UCS-mini and Nexus N5k (N5K-C5548UP-B-S32)

Question

I have UCS 5108 Blade Server Chassis (with two B200 M3 Blade Servers inside and two FI 6324) connected to Nexus N5k switch through 4x10GE links.
I want to configure the two aggregated channels FCoE (vFC) from chassi to switch.
All instructions I've been seen refer to the fact that UCS-mini must be in the FC end-host mode, but UCSM 3.0 version does not support this mode, what shoud I do?
I set up following the instructions www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/116248-configure-fcoe-00.html
But, after setup I have a fault on fabric: FCoE or FC uplink is down on Vsan 500;
And in Nexus: Vsan 500 is down (waiting for flogi)
When I do "show interface vfc 1" from Nexus CLI I see no 'Trunk vsans (up)', but
'Trunk vsans (initializing)             (500)'
Unfortunately, I can't find technical notes for UCS mini (with UCSM v. 3.0), so may be You can promt any guides or suggestion for this?
Thank You in advance!

Answer 1

The release notes of 3.0.1e, which is for UCS-mini,
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_3_0_rn.html
says:
Unsupported Features
The following features are not supported in Cisco UCS Manager, Release 3.0:
Features, defect fixes, and platforms introduced in Cisco UCS Manager, Release 2.2(2c) and newer that are not explicitly called out in New Features or Resolved Caveats sections of this document.
Some features introduced in Cisco UCS Manager, Release 2.2(1b) and earlier releases:
–Ethernet Switching Mode
–FC End Host Mode
– Private VLANs
– Port Security
– KVM Virtualization is not tested (although not explicitly disabled)