Plot multi curves in one window

Is there anyone who can tell me how to plot multi-curves in one window using LabVIEW? The sample chart is attached. I have LabVIEW 7.1. If you think it is impossible in LabVIEW7.1, can LabVIEW 8.0 do the job?
Thanks for your help in advance.
Jane
Attachments:
PerformanceCurve.JPG ‏41 KB

Hi Jane,
CoastanMaineBird is right about the difference between a "plot", a
"Graph" and a "window".
It seems that what you want is a either a Graph or a Chart with multiple plots.
It's quite simple to do either of these. As said before, refer to the Context
Help (Ctrl + H) from the block diagram terminal of the Chart or Graph to see
how to add multiple plots. Here's a screenshot of how you would do it with a
Chart and a Graph:
If you want to use different Y-scales for each plot, you need to create multiple
Y-scales and then specify which plot uses which Y-scale:
I hope that this is explanation enough to get you started - otherwise, please
let me know.
Have fun!
Message Edited by Philip C. on 11-12-2005 03:46 PM
- Philip Courtois, Thinkbot Solutions
Attachments:
MultiPlot Chart and Graph.PNG ‏6 KB
Multiple Y-scales.PNG ‏13 KB

Similar Messages

Integrating plot multi x-y vi's and three dimensional graph vi's

i wish to plot a three dimensional graph of multiple data points (there is no formula or math function involved so currently simulated using dc signals). i used plot multi x-y vi for acquiring the points but it is in "2-d picture" format. i used 3-D surface graph vi for graph generation which is in a different format. can i integrate the two somehow or is there any other way out?

To plot multiple x,y curves in 3D use the 3D Curve.vi
The attached example demonstrates using 3D Curve.vi to plot several time varying curves.
I hope this helps
Kurt Friday
www.sciware.com.au
Attachments:
3DCurvesDemo.vi ‏62 KB

P965 Neo-F V2 + core 2 duo 4500 !!!!! Multi problem , big one !

P965 Neo-F V2 + core 2 duo 4500 !!!!! Multi problem , big one !
Does enyone know how to put manualy the multi for this cpu on this BOARD ???!!!!!!
I have allready flash to last bios 3.7 . In the bios is 4500@2200 mhz ( 11*200 ) 800 mhz dram .But in windows i belive is enable something becose the cpuz shows x6 multi = 1200mhz.If an apllication is started the multi becomes 11 ( normal ) .
I geast whant to put manualy multi 11 !!!!! There are no seting in bios for that !!!!

yes, it's power saving feature.
there's no problem to stay 11x during idle. But it saves more power if it goes down to 6x. Do you wanna leave your car engine at high rpm while your car is sitting at the traffic light??

How can I represent more than one plot in an only one chart?

Hello everyone,
i got a code where I don't understand how to represent more than two plots, with different scales each, in the same waveform chart.
As brief review:
* 2 adquisition data wired to Bundle
* wire from Bundle to waveform chart.
* options of th chart: stack plots.
I've tried to expand the Bundle but the problem is that I'm wiring a 3 element cluster to a 2element cluster chart. I don't understand how to upgrade the chart...
(there's the two plots in each chart)
(there's the code, where I've already tried expanding any bundle and wiring other signals, then wiring the bundle's output to the chart)
I think if I could add more scales, it will be possible to plot three plots on the same chart.
Thank you for your time
Marcelo A J

Since you are dealing with waveforms already, I think you actually want to have an array of waveforms to go into your chart. You also need to map the plots to the scale that you want to use. You can do that in the plot tab of the properties window.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Ability to view multiple files in ONE window

I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
This is another pearl:
Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
This is ABSOLUTE DISASTER!!!
I found some explanations from Adobe on the Web that are more than a year old.
I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
By the way, it was Microsoft's idea... Adobe were just following their example on this.
You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

In produstion one window in smart form is not getting displayed

hello everyone,
i had created one smartform report,
its getting executed on development,
but on production only one window not getting displayed,rest of the windows are displaying.
can you give me some suggestions so i can make changes in smartforms.
thaking ya
chitra

First check for window conditions
which window is not displaying secondary window or copies window or Final window or address window
and tell me the clearly

How to create more than one window for a vi that can be acces anytime...just like using the creating new window in internet explorer

hello guys,
I want to create a vi such dat when I press a button on the frontpanel of the vi it opens the same vi in another window..and I should be able to work on this new window also able to work on the previous window without closing it...Just like opening a new window when using the internet explorer....
I try to make my vi a reetrant vi but when I click the new window button on my vi..a new clone windows open up that I can control but the previous windows is not accessible not I close the current window...I want a way that I can acces both vi window and d operation of one will not affect the other like when the indicators are updating in one window the other window will not update...
Thank you...
Solved!
Go to Solution.

The picture attached shows what i want to achieve as a vi or executable...The new window button opens a clone of the vi, but the previous window can not be operated on until i close the clone window...i want to be able to work on both window at any time without closing one of them....The vi was design in labview 2010
Attachments:
ni.jpg ‏66 KB
window vi.vi ‏8 KB

Firefox won't let me open more than one window at a time. how do i fix the problem

Firefox won't let me open more than one window at a time. It use to allow me to open multiple windows before but for no apparent reason it stopped. I uninstalled it and re-installed but I'm having the same problem. How do I fix the problem
== This happened ==
Every time Firefox opened
== several days ago

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Cannot open more than one window with Firefox

I've been having this problem for a couple of weeks, now, and I've run out of ways to try and fix this.
One day, after starting my computer up, I opened Firefox. No big deal, everything looks fine, tabs are working, etc. Then, when I went to open a second window, nothing. The first window still works fine, I can open tab upon tab, but it just won't open any more windows.
As much as I'm a fan of the browser tabs, I still prefer to have them spread out over more than one window.
I've read through a ton of different troubleshooting walkthroughs and whatnot, reinstalled three or four times, restored settings, but nothing works.
Well, not entirely, I guess. Here's the part that I can't quite figure out. When I disable every single addon, Firefox works just fine. I've done the checking down the list, trying to single one out, but it's *any* addon. Even something as simple as a dictionary search ([https://addons.mozilla.org/en-US/firefox/addon/68/]) causes this to happen.
I've checked with an older computer with an older version of Firefox, and it still seems to work fine with addons enabled, so I'm wondering if this is an update issue?
Would reverting back to a previous version of Firefox solve this, and if so, where would I be able to find downloads for a previous version?
So, like I said, I'm at a bit of a loss here. Sort of at a crossroads for trying to figure out what to try next, so I'm hoping someone a bit more knowledgeable can help steer me in a direction.
Edit: I just noticed that the posting includes system information with my question. I should clarify that I'm posting this from an older computer with an older version of Firefox. On the computer that I'm having this issue with, I'm using the newest version of Firefox (3.6.8).

Some old posts indicate the following add-ons have caused the problem of not being able to open a new window in Firefox in the past. If you have any of them you might want to disable or uninstall them to see if that is causing your problem. 
* HP Smart Web Printing Toolbar
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
* Skype
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
* Zone Alarm Toolbar
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=624545&forumId=1
** http://forums.zonelabs.com/showthread.php?t=73592&highlight=firefox+window
 
You need to update your plug-ins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions: http://www.java.com/en/download
 
You are using an out-of-date version of Firefox. Unless you have a reason for using that old version, you might want to consider upgrading.
*The Firefox version series 3.0.x is no longer being supported or updated, even for security issues.
*The last version in the 3.0.x series was 3.0.19 which was released 03/15/2010.
*You are using version 3.0.13 which was released 07/31/2009.
Consider upgrading to the current version, Firefox 3.6.8. Firefox 3.6.9 is scheduled to be released in a few days and the new Firefox 4 will be released later this year or early next year.
* See: https://support.mozilla.com/en-US/kb/Upgrading+to+Firefox+3.6
* Or you can download the full installer and save it to your hard drive for installation from: http://www.mozilla.com/en-US/firefox/all.html
* Also see: http://support.mozilla.com/en-US/kb/Installing+Firefox

How can I close one window without closing all open windows?

If I open more than one window, I can't close just one. When I try to close just one, I'm warned that I'm about to close more than one (all of them) but I'm not told how to close just one.

Are you sure you aren't getting tabs confused for windows? If you close a window containing multiple tabs, Firefox should give you a warning that you are about to close several tabs. To close a tab do one of the following:
* click the x at the right end of the tab (when you only have a few tabs open)
* open the tab you want to close, then click the x that appears
* right click the tab and select 'Close Tab'
* open the tab you want to close and press Ctrl+W
You can close a window using Ctrl+Shift+W.

Preview; How can I open multiple PDF's in one window with Preview?

How can I open multiple PDF's in one window with Preview?
I have gone to Previews preferences and selected 'Open groups of images in the same window' and have tried every setting imaginable and nothing works. What am I doing wrong?

Hi, a few ways..
http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
http://www.macosxhints.com/article.php?story=20060327192826493&lsrc=osxh

How do I create more than one "window"?

Hi.
I just started with JavaFX and know about the basics (at least I thought so).
But: How do I create an application with more than one "window"?
One stage has one scene with several components like buttons - ok... I already have a stage with a scene with buttons and actions - Now I want to click one of these buttons and then get to another stage (or scene or whatever) where I see some other textfield and buttons.
How do I realize this with JavaFX? I did not find anyone example in the web? What am I missing? Do you not create this flow with JavaFX?
Please can someone explain this to me (and if possible post a link where I can some code where this is implemented)?
Thanks a lot...

Recent thread: [Multiple stages app dev|http://forums.sun.com/thread.jspa?threadID=5405420]
Other threads... well, hard to find back, I reckon.
Simple example:
    // Some control/shape
      Circle
        centerX: 15
        centerY: 15
        radius: 10
        fill: Color.LAVENDER
        stroke: Color.PURPLE
        onMouseClicked: ShowDialog
      }and elsewhere:function ShowDialog(evt: MouseEvent): Void
println("Circle pressed");
var dialog: Stage = Stage
    title: "A Dialog"
    visible: true
    scene: Scene
      width: 300
      height: 50
      content:
        Text
          x: 5, y: 5
          font: Font { size: 24 }
          content: "I am a secondary window"
          textOrigin: TextOrigin.TOP
}Apparently, you just have to create an instance of Stage to have it to appear.

How do I consolidate an Itunes music library on two windows computers onto one windows computer?

How do I consolidate an Itunes music library on two windows computers onto one windows computer?

Click here, pick the option which best fits your situation, open the larger library in iTunes, move the media files from the smaller one into the library in the open iTunes program window or the Automatically Add to iTunes folder, and then import the playlists. Any rented movies will only play on the computer they were originally downloaded to.
(126751)

How do I move tabs from one window to another window?

With the previous version of firefox, I could drag a tab from one window to another window. (and if there was only one tab left in that window, it would automatically close that window because there were no more tabs open in it)
With the latest version of firefox, '''How do you drag or move a tab from one window to another window'''

Hi,
To move to the next tab it's '''Ctrl''' + '''Tab''' or '''Ctrl''' + '''Pg Dn''' (Page Down). To go to the previous tabs (reverse order) it's '''Ctrl''' + '''Shift''' + '''Tab''' or '''Ctrl''' + '''Pg Up''' (Page Up) keys. More about this and other keyboard shortcuts [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts here.]

I lost my only navigation tool bar, so I can only open one window at a time, and can't use google. Help.

I'm not sure what I did, but I right clicked on my google tool bar (which I use since I can't find the Firefox navigation toolbar) and I somehow disabled it. Now I can only use one window at a time, and if I go to a website, I can't go to another without closing my current one so I can go to my homepage, which is google.

If the Menu Bar is hidden then press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

Plot multi curves in one window

Similar Messages

Maybe you are looking for