Plotting an X,Y graph in a Java Applet

Hi,
I am starting to get into Java as much as possible, and love the command prompt programming, but am stilly pretty stuck with the Applet side of things :( Anyway, I have done this code so far:
http://www.hashjava.com/codeboard.php?user=1
However, I need to implement an X,Y graph in an applet - I have no idea really how to do this. I have looked at using class Point2D.Double, but I don't know what to do really.
The graph must be plotted from the points contained in the two arrays xValue / yValue (lines 27 and 28 respectively). If someone could point me in the right direction, that would be great. The graph just needs to be plotted from this array - no user interface is needed apart from the user being able to see the graph with lines drawn between successive the points...
Any help would be greatly appreciated,
Kind Regards,
Alex

Hi,
I have drawn a graph on a JPanel which runs as part of a GUI written in Swing. But the code I wrote was laboured and uses mostly java.awt drawing APIs. Can you let me know if found something more advanced for drawing graphs as I couldn't find anything.
regards,
MG.

Similar Messages

How to Generate Event on change in Plot Legend for XY Graph

Hi,
I have two XY graphs on the front panel and would like to maintain a common plot legend such that any change in the plot legend affects both graphs.
Objective: I would like any value change in plot legend to fire an event.
How do I program that?
I know of value change event for the graph but am unable to find something specific to the plot legend. Other option is to have the user press a "refresh" button that will fire the event.
Feel free to share thoughts on other elegant methods to achieve the same objective.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hi Sarah,
Looks like you are talking of exactly what I want!
I have attached a sample VI to try achieve what I want. But it still has some issues which are:
1) I am unable to configure a Plot Attribute Change Event. I have used a mouse leave event instead. How does one configure a Plot Attribute Change Event?
2) Is there no single property which will transfer all the settings of plot legend from one graph to plot legend of another graph? In my sample VI, I have to read each property of the master graph and feed it into the slave graph.
Kindly note I am using LV FDS 7.1 on Win2000
Thanks,
Gurdas
Message Edited by Gurdas on 03-27-2006 11:51 PM
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu
Attachments:
Graph_PlotLegend_Event.vi ‏45 KB

Help plotting points in a java Applet using Bresens Algorithm

Hi,
I am trying to compile my code and it doesn't like POINT. I am guesing I am using the wrong thing.
Point.point(Math.round(x), Math.round(y)); and I tried just Point.
How do I plot points so that it forms a line. What internal function do I use?
Here is my code.
import java.applet.*;
import java.awt.*;
import java.lang.Math;
import java.awt.Point;
import java.awt.Graphics;
public class DDASimple extends Applet
     int   dx, dy, steps, k, absolutex, absolutey;
     float xinc, yinc, x, y;
   public void init()
public void paint(Graphics g)
DDASMPL(50,50,100,150);
public void DDASMPL(int x1, int y1, int x2, int y2)
repaint();
dx = (x2-x1);
dy = (y2-y1);
//absolutex =
if( Math.abs(dx) > Math.abs(dy))
     steps = Math.abs(dx);
else
     steps = Math.abs(dy);
     xinc = dx / steps;
     yinc = dy / steps;
     x = x1;
     y = y1;
Point.point(x1, y1);
      for (k = 1; k < steps; k++)
          x = x+ xinc;
          y = y + yinc;
Point.point(Math.round(x), Math.round(y));
//g.drawOval(Math.round(x), Math.round(y));
     }//end else
}//end function dda
}//end class ddda applet

I took out the repaint(). and below is the updated version
I am not getting anything now, no line
import java.applet.*;
import java.awt.*;
import java.lang.Math;
import java.awt.Point;
import java.awt.Graphics;
public class DDASimple extends Applet
     int   dx, dy, steps, k, absolutex, absolutey;
     float xinc, yinc, x, y;
   public void init()
public void paint(Graphics g)
DDASMPL(160, 140, 220, 140, g);
public void DDASMPL(int x1, int y1, int x2, int y2, Graphics g)
dx = (x2-x1);
dy = (y2-y1);
//absolutex =
if( Math.abs(dx) > Math.abs(dy))
     steps = Math.abs(dx);
else
     steps = Math.abs(dy);
     xinc = dx / steps;
     yinc = dy / steps;
     x = x1;
     y = y1;
//Point xxx = new Point(x1, y1);
g.fillRect(x1, y1, 1, 1);
      for (k = 1; k < steps; k++)
          x = x+ xinc;
          y = y + yinc;
//Point.point(Math.round(x), Math.round(y));
g.fillRect(Math.round(x), Math.round(y),1 ,1);
     }//end else
}//end function dda
}//end class ddda applet

Multi plot cursor in Mixed Graph

If Digital waveform and normal waveform graph is plotted in a mixed graph, and if I choose watch all plots(multi plot) in cursor, LabVIEW closes immediately with an error popup dialog
I have attached the print screen image of that error popup
Attachments:
error.JPG ‏188 KB

Hi Stephen,
           I found a considerable solution to overcome that error.
           Build all the array data at first and then generate digtal
waveform in single instance.
           ie., With number of numerical array data, build a 2D array of
numerical data and make a transpose and then generate a waveform.
           It generates number of digital waveform equal to that of the
column size of 2D Array.
           Do not build generated digital waveforms. This creates an error
while using multi plot cursor--> watch--> All plots.
           I have attached the modified, bug removed Vi with this message for
your reference.
Regards,
Raja
Project Engineer
Soliton Technologies
www.solitontech.com
Attachments:
Mixed Graph Modified without Error.vi ‏25 KB

How do I determine the number of plots on a waveform graph?

How do I determine the number of plots that have previously been plotted on a waveform graph? I am loading dynamic data from a file. If I convert to an array and size it and there is only one plot, I get the number of data points and I don't know how to tell the difference.

Usually by reading the graph terminal or a local of it and determining the first or second dimension (not sure which at the moment) size of the resulting 2 dimensional array. If it is a 1 dimensional array you have either only one plot or an array of clusters each representing one plot. But as these data types are determined by compile time, there shouldn't be a problem with this causing ambiguity.
Rolf K
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Devloping graphs using pure java without applets and swings

Hi Guys
i want to devlop bar graphs,pie charts,line graphs using pure java.i don't want to use applets and swings..does any body help on this asap..
IT'S VERY URGENT
cheers
ANAND

Go to
http://java.sun.com/docs/books/tutorial/information/download.html#OLDui
and get: Creating a User Interface (AWT Only) Archive (tut-OLDui.zip)

How can i make a plot in a 3d graph invisible

hello all,
attached is a half-way completed vi which shows how i would make the plot/plots in the 3d graph invisible. unfortunatly i do not know how "item" can refer to the plot i want to make invisible.
any ideas?
Solved!
Go to Solution.
Attachments:
remove plot in 3d graph.vi ‏27 KB

You are almost correct.
The Item input is a string whose value is the name of the target plot. You can view all the plots names from shortcut menu->"CWGraph3D" group->"Properties" item->"Plots" tab ->"Plots" list.
Attachments:
remove plot in 3d graph.vi ‏20 KB

How to Stack 16 Plots in an 8-Graph Chart

Here's a good one:
I have a stacked chart with 8 graphs. I'd like to display 16 plots on the 8 graphs with each 2 plots overlaid (in different colors). Is there a way to do that?
Fataneh

Hi Fataneh,
Using the "transparent" color you could make one of two charts "see-through"...
- what do you think?
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
overlay.GIF ‏61 KB

How can I draw two differenct plots at the same graph?

[I am beginner]
I have two different set of data which have differenct x-axis values. How can I draw two data at the same plot?
For example, one data set is
x y
1 3.5
3 2.3
5 1.3
8 3.2
The other
1 2.3
2.5 5.4
4 2.5
If I use m_graph.plotXvsY two times. But it draw only one graph at the same time.
Please let me know. Thank you in advance.

Do you really need the two sets of data on the same plot or is what you really care about is that the two sets of data are in the same graph? If it's the former, then there's not much that you can do since a plot can only contain one set of data. You can append to an existing set of data by calling the corresponding Chart (for example, ChartXvsY) method, but the result is that the plot's data will appear continuous.
If it's the latter, the way to do this is to add multiple plots to the graph and plot each set of data in a separate plot. For example, go to the Plots tab in the graph's property pages, add another plot, then here's some sample code that demonstrates how to plot the sets of data from your example above:
double xData1[] = { 1, 3, 5, 8 };
double yData1[] = { 3.5, 2.3, 1.3, 3.2 };
CNiReal64Vector xDataSet1(4, xData1), yDataSet1(4, yData1);
m_graph.Plots.Item(1).PlotXvsY(xDataSet1, yDataSet1);
double xData2[] = { 1, 2.5, 4 };
double yData2[] = { 2.3, 5.4, 2.5 };
CNiReal64Vector xDataSet2(3, xData2), yDataSet2(3, yData2);
m_graph.Plots.Item(2).PlotXvsY(xDataSet2, yDataSet2);
Hope this helps.
- Elton

Is apple allow core plot framework to draw graph in iPhone app?

is apple allow core plot framework to draw graph in iPhone app?

Wrong forum. Ask in the developer's forum.

Helpdesk Agent Needs help with JAVA applet not loading for HTTPS site

Sorry....I am posting here as I do not know where to start.
JAVA Console Message. The applet runs via HTTP URL but will not load via HTTPS. Any idea would be much appreciated.
load: class com.ebreviate.auction.applet.TickerTape.class not found.
java.lang.ClassNotFoundException: com.ebreviate.auction.applet.TickerTape.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-7" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-com.ebreviate.auction.applet.TickerTape.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class com.ebreviate.auction.applet.graph.LineGraph.class not found.
java.lang.ClassNotFoundException: com.ebreviate.auction.applet.graph.LineGraph.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-6" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-com.ebreviate.auction.applet.graph.LineGraph.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

I am repeating the question that RHM submitted...has anyone found a solution to this issue...Applet com.pogo.client.jvmtest.applet started. I was not having a problem and then out of no where on Sept. 13 my game rooms failed to load and this message started appearing. I have done everything asked of me to clear files both Internet and Java, to uninstall, re-install, etc...nothing works. Does anyone have an answer for a very non technical user?

JavaScript calls method on Java Applet-- Problem

Hi all,
I have a problem as following:
I have a method on JavaScript calling a method on Java Applet. A method on JavaScript repeatedly retrieves data form the server , let's say; every 100 ms and it calls the method on Java to draw a graph(I use thread to call repaint()). The problem is, if I leave the applet site(or the site has lost the focus), the stop() will be called and I can't recieve data from JavaScript anymore. If I go back to the site, the applet starts, but the graph doesn't show the figure, as it supposes to show.
how can I tell the browser doesn't call the stop() or there is another way to solve this problem?
Thanks for all answers. CU.
A-Pex

my own fault.. it's not the browser or the applet.. It's my computer.. it's too old for this applet..
Does anyone know, how to optimize the applet with thread? thanks..

Portal SSO to a Java Applet

Hello,
I have a customer that is looking to set up SSO with an application that uses a Java Applet as its login screen to the app.
Any advice on how this can be set up. SSO via External Application doesn't seem to work since it doesn't use a GET or POST method.
Thank You!
Padmini

An applet (with normal security setup) can only open up socket connections to the host from whence the applet came. Sounds like your applet is trying to talk to port 5000 on the client's box. Can't do that, unless:
a) The client's box is the server (which is the case under your first scenario)
b) The applet is signed or otherwise set up to be "trusted" that it doesn't contain harmful code.
The security policy is there for a reason. I, for example, wouldn't want to stumble across some rogue applet out on the internet which then tries to open up socket connections to things on my corporate intranet or local machine -- unless I KNEW it was going to do that (I "trust" it).

Can I save as pdf when printing from a Java applet on a webpage in Safari?

I am trying to use a webpage that is running a Java applet. A dialog comes up that asks me, "Do you want to run this application?" The dialog also says, "This application will run with limited access that is intended to protect your computer and personal information." I select "Run". The applet generates an image I want to print. There is a "Print" button on the applet. I select "Print". A Security Warning dialog comes up that says, "The applet has requested access to the printer. Do you want to allow this action?" I select "OK". The Print dialog comes up. I choose the PDF button in the lower left corner. I choose "Save as PDF...". A second Print dialog comes up. I input a title in the Save As box. I choose Desktop in the Where box. I do not change anything else and select the "Save" button. A dialog appears that says, "Print Error while printing." There is an icon with paper, a pencil, a ruler and a paintbrush on the dialog.
Is this an issue with Apple and Java security? Does "run with limited access" mean I can't print and save as PDF? Should I upgrade to Mavericks? It seems like others have not been happy with Mavericks and have had problems saving as PDF with Mavericks. How do I let Apple know about this error? The error dialog is useless.
I am on a Mac running OS X 10.8.5 and Safari 6.1.2. My Java version is 7 update 51.
What other information can I provide to help solve the problem (if it can be solved)?
Thank you for your help!

Correction I would like to save as PDF/A-1b
for archiving.
http://www.adobe.com/enterprise/standards/pdfa/

Problem Launching Java Applet with Plug-in: Version 1.4.2_01

Hello out there:
I recently installed j2re-1.4.2_01 on my home computer but have been unable to access Web sites emmploying JAva applets. The following is an email exchange with Jeff Hall of Lowell Observatory, manager of an educational site hosted by Lowell, trying to resolve my problem. The messages are better understood if read in reverse order.
I'm hoping that someone will recognize the source of my problem and can recommmend a solution. I would appreciate any help offered.
Thanks,
Mike Coucke
Hi Jeff:
Well, I guess the problem lies with me somewhere. Here's my answer/status to your questions/suggestions:
1) I'm using MS Windows Me version 4.90.3000
2) I do have the directory C:\Windows\.jpi_cache\jar\, but the only thing in it is an empty folder labeled "1.0". The file LP.jar does not exist anywhere on my hard drive.
3) I tried several game sites that utilized Java applets and got the same results: the Java cup in the upper left corner followed a few seconds later by the red "X". So, evidently the problem is somewhere on my end.
I'm going to post our email exchanges in a Java Users Forum managed by Sun to see if anyone out there can solve my problem. However, if you have any more suggestions, I'll be glad to try them.
Thanks for the help.
Mike Coucke
[email protected]
----- Original Message -----
From: "Jeffrey Hall" <[email protected]>
To: "'Mike Coucke'" <[email protected]>
Sent: Friday, September 05, 2003 1:02 PM
Subject: RE: Registration with Lowell Education Online
Mike,
Rats! What version of Windows are you using? It's a little strange to
see the user directory set to C:\Windows; if you're using XP, I'd expect
it to be something like C:\Documents and Settings\Mike Coucke. In any
event, the output that is of concern is these two lines:
java.lang.ClassNotFoundException: LPRemote.class
Caused by: java.net.UnknownHostException: proxy
It looks like your browser is not finding our server's IP when it comes
time to download the necessary Java code.
LPRemote.class is the fundamental code that runs LOPARC, and your
browser should be downloading it automatically when you click connect.
LPRemote.class is stored along with a bunch of other classes in a file
called "LP.jar" that you download from our server. So, if you go to C:
in Windows Explorer and do a file search for LP.jar, you should find it.
On my machine, it's stored in a directory called ".jpi_cache\jar\" in my
user home directory. Let me know if you have this file, or the
jpi-cache directory.
One other thing you might try is going to a different site that you know
uses Java applets -- I think some of the online game rooms at Yahoo use
Java. See if other sites that use Java load correctly. Then we'll know
if it's our server specifically, or a more general problem on your end.
Jeff Hall
Lowell Observatory
Hello Jeff:
I still have the Java "blues". I followed your instructions, but am still unable to launch a LOPARC session. After an initial failure, I uninstalled all three Java versions I had (1.4.0, 1.4.1, 1.4.2), then reinstalled 1.4.2_01 from the Sun website.
Now, when I try to launch LOPARC, I initially get a blank window with the Java cup in the upper left corner. After about 20 seconds, the cup changes to a red "X". During those 20 seconds, the following appear in the IE message bar at the bottom of the window: "Applet LPRemote notinited" (their spelling) which changes to "Loading Java Applet Failed..." when the red "X" appears.
Following is a copy of the log from my Java Console during all of this:
Java(TM) Plug-in: Version 1.4.2_01
Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
User home directory = C:\WINDOWS
Proxy Configuration: Manual Configuration
Proxy: http=proxy,https=proxy,ftp=proxy,gopher=proxy
Proxy Overrides:
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class LPRemote.class not found.
java.lang.ClassNotFoundException: LPRemote.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.UnknownHostException: proxy
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.http.HttpClient.privilegedOpenServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
I followed this up by executing the following three console commands:
"dump system properties"
"dump classholder list"
"dump thread list"
and obtained the following listings:
Dump system properties ...
acl.read = +
acl.read.default =
acl.write = +
acl.write.default =
application.home = C:\PROGRA~1\JAVA\J2RE14~1.2_0
awt.toolkit = sun.awt.windows.WToolkit
browser = sun.plugin
browser.vendor = Sun Microsystems, Inc.
browser.version = 1.1
deployment.javaws.cache.dir = C:\WINDOWS\.javaws\cache
deployment.javaws.jre.0.enabled = true
deployment.javaws.jre.0.location = http://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.osarch = x86
deployment.javaws.jre.0.osname = Windows
deployment.javaws.jre.0.path = C:\Program Files\Java\j2re1.4.2_01\bin\javaw.exe
deployment.javaws.jre.0.platform = 1.4
deployment.javaws.jre.0.product = 1.4.2_01
deployment.javaws.jre.0.registered = true
deployment.javaws.version = javaws-1.4.2_01
deployment.system.cacerts = C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\security\cacerts
deployment.system.home = C:\WINDOWS\Sun\Java\Deployment
deployment.system.jssecacerts = C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\security\cacerts
deployment.system.profile = C:\WINDOWS
deployment.system.security.policy = file:/C:/WINDOWS/Sun/Java/Deployment/security/java.policy
deployment.user.cachedir = C:\WINDOWS\Application Data\Sun\Java\Deployment\cache
deployment.user.certs = C:\WINDOWS\Application Data\Sun\Java\Deployment\security\deployment.certs
deployment.user.extdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\ext
deployment.user.home = C:\WINDOWS\Application Data\Sun\Java\Deployment
deployment.user.jssecerts = C:\WINDOWS\Application Data\Sun\Java\Deployment\security\deployment.jssecerts
deployment.user.logdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\log
deployment.user.profile = C:\WINDOWS\Application Data
deployment.user.security.policy = file:/C:/WINDOWS/Application%20Data/Sun/Java/Deployment/security/java.policy
deployment.user.tmpdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\cache\tmp
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
file.separator.applet = true
http.agent = Mozilla/4.0 (Windows Me 4.90)
http.auth.serializeRequests = true
https.protocols = SSLv3,SSLv2Hello
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\PROGRA~1\JAVA\J2RE14~1.2_0\classes
java.class.version = 48.0
java.class.version.applet = true
java.endorsed.dirs = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\endorsed
java.ext.dirs = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\ext
java.home = C:\PROGRA~1\JAVA\J2RE14~1.2_0
java.io.tmpdir = C:\WINDOWS\TEMP\
java.library.path = D:\PROGRAM FILES\INTERNET EXPLORER 6;.;C:\WINDOWS\SYSTEM;C:\WINDOWS;D:\PROGRA~1\INTERN~1;;C:\WINDOWS;C:\WINDOWS\COMMAND
java.protocol.handler.pkgs = sun.plugin.net.protocol|sun.plugin.net.protocol
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.4.2_01-b06
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.4
java.util.prefs.PreferencesFactory = java.util.prefs.WindowsPreferencesFactory
java.vendor = Sun Microsystems Inc.
java.vendor.applet = true
java.vendor.url = http://java.sun.com/
java.vendor.url.applet = true
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.4.2_01
java.version.applet = true
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.4.2_01-b06
javaplugin.maxHeapSize = 96m
javaplugin.nodotversion = 142_01
javaplugin.proxy.config.list = http=proxy,https=proxy,ftp=proxy,gopher=proxy
javaplugin.proxy.config.type = manual
javaplugin.version = 1.4.2_01
javaplugin.vm.options = -Djava.class.path=C:\PROGRA~1\JAVA\J2RE14~1.2_0\classes -Xbootclasspath/a:C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.4.2_01 -Djavaplugin.nodotversion=142_01 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\JAVA\J2RE14~1.2_0 -Djava.protocol.handler.pkgs=sun.plugin.net.protocol
line.separator = \r\n
line.separator.applet = true
os.arch = x86
os.arch.applet = true
os.name = Windows Me
os.name.applet = true
os.version = 4.90
os.version.applet = true
package.restrict.access.netscape = false
package.restrict.access.sun = true
package.restrict.definition.java = true
package.restrict.definition.netscape = true
package.restrict.definition.sun = true
path.separator = ;
path.separator.applet = true
sun.arch.data.model = 32
sun.boot.class.path = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\rt.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\i18n.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\sunrsasign.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\jsse.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\jce.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\charsets.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\classes;C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\plugin.jar
sun.boot.library.path = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium i486 i386
sun.io.unicode.encoding = UnicodeLittle
sun.java2d.fontpath =
sun.net.client.defaultConnectTimeout = 120000
sun.os.patch.level =
trustProxy = true
user.country = US
user.dir = C:\WINDOWS\Desktop
user.home = C:\WINDOWS
user.language = en
user.name = Michael G. Coucke
user.timezone =
user.variant =
Done.
Dump classloader list ...
codebase=http://kraken.lowell.edu/, key=http://kraken.lowell.edu/,IONJava/classes/ion_16.jar,IONJava/classes/LP.jar, zombie=false, cache=true, refcount=1, info=sun.plugin.ClassLoaderInfo@109de5b
Done.
Dump thread list ...
Group main,ac=11,agc=2,pri=10
main,5,alive
AWT-Windows,6,alive,dameon
AWT-Shutdown,5,alive
Java2D Disposer,10,alive,dameon
AWT-EventQueue-0,6,alive
Group Plugin Thread Group,ac=3,agc=0,pri=10
Main Console Writer,6,alive
AWT-EventQueue-1,6,alive
TimerQueue,5,alive,dameon
Group http://kraken.lowell.edu/-threadGroup,ac=2,agc=0,pri=4
thread applet-LPRemote.class,4,alive
AWT-EventQueue-2,4,alive
Done.
I'm not a Java expert, so this may be more information than you ever wanted to see.
Once again, I hope that you can help. My experience has been that I usually have some obscure option set incorrectly and that causes me great grief.
Thanks fo your help,
Mike Coucke
[email protected]
----- Original Message -----
From: "Jeffrey Hall" <[email protected]>
To: "'Mike Coucke'" <[email protected]>
Sent: Thursday, September 04, 2003 11:48 AM
Subject: RE: Registration with Lowell Education Online
Hi Mike,
Try it now. I think this problem has arisen because Sun just
released a new version of the Plug-in (1.4.2), and when we released the
public beta of LOPARC, only one relevant version (1.4.0) was available
and the LOPARC code was written to look for that by default. I have
just recoded the relevant routines so they should now cause your browser
to simply pick up the latest 1.4 version of the Plug-in you have
installed, whatever it is. I "broke" Java on my machine to replicate
your problem, and the code I inserted today did fix it. Hopefully it
will have the same effect for you. I am running IE 6 and plugin
1.4.2_01 (as accessed via Tools->Sun Java Console).
One broader problem: some (non-LOPARC-specific) users on the Sun
forums have reported the "JRE collision" you are seeing when multiple
versions of the Plug-in are installed on the same machine. So if the
fix I made to our code doesn't work, one option would be to uninstall
all Java components from your computer and do a fresh install of the
latest runtime environment.
Let me know how/if this works. Thanks for the feedback and for your
patience.
Best regards,
Jeff Hall
Lowell Observatory
-----Original Message-----
From: Mike Coucke [mailto:[email protected]]
Sent: Wednesday, September 03, 2003 6:30 PM
To: [email protected]
Subject: Re: Registration with Lowell Education Online
Hello Jeff:
So far, I have been unable to launch a LOPARC session. I repeatedly
get the following error message:
"Exception: java.lang.ClassNotFoundException: LPRemote.class"
My browser is MS Internet Explorer version 6.0.2800.1106 Initially I was
using Java Plug-In version 1.4.1 and received the error message. I went
to the Sun website and downloaded/installed Java Plug-In version 1.4.2
and still get the message.
Before I try to launch LOPARC, I can select Tools->Sun Java Console from
IE's pull down menu to check my Java Plug-In version. When I try to
launch LOPARC, I get the following message:
"Applet(s) in this HTML page requires a version of Java different from
the one the browser is currently using. In order to run the applet(s)
in this HTML page, a new browser session is required, press 'Yes' to
start a new browser session." If I select 'No', I get the following
message: "Java Plug-in detected JRE collission"
If I select 'Yes', a new browser window opens and then I get the first
message above.
Can you help?
Mike Coucke
[email protected]
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Monday, September 01, 2003 5:30 PM
Subject: Registration with Lowell Education Online
September 1, 2003
Dear Michael Coucke:
Thank you for registering with Lowell Observatory's online education
site. We hope you enjoy using it and visit regularly as we continue to
expand its features and capabilities. This is a one-time welcoming
email.
For your records, your user ID is xxxxx, and your password is #########.
You'll need to supply these each time you log in.
This site gives you access to research-grade equipment including a 16"
telescope, CCD detector, and image processing software. Our online
archive of data is now available 24/7. The telescope will be opening to
our onsite users in May, and on select nights to the Internet at large
in June.
We have designed this site so you don't need a huge monitor or a
supercomputer to use it. All pages are viewable on screens running at
800x600 resolution or higher. To use LOPARC, you'll need a Java-enabled
browser with the Java 1.4 plug-in installed. If you don't have the
plug-in, you'll be prompted to download it the first time you attempt to
connect. This is an admittedly large (9 MB) but one-time-only download.
This site works correctly under Internet Explorer version 5 or higher.
If you use Netscape, you must be running version 6 or higher, and
display or applet behavior anomalies may occur.
If at any time you can't connect to our server, simply try again later.
We do experience several power outages each year, particularly during
Flagstaff's summer thunderstorm season. Our server is fully protected
and backed up, and can be quickly brought back on line, but any active
user sessions will be lost. Thanks for your patience during these
inevitable downtimes.
Your questions, comments, suggestions, and bug reports about this site
are always welcome. On behalf of the LOPARC development team, thanks
for signing up!
Jeffrey Hall
Assistant Research Scientist
Associate Director, Education and Special Programs
Lowell Observatory
Flagstaff, Arizona

Hi Mike,
I see this in your logs:
Java(TM) Plug-in: Version 1.4.2_01
Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
User home directory = C:\WINDOWS
Proxy Configuration: Manual Configuration
Proxy: http=proxy,https=proxy,ftp=proxy,gopher=proxy
Proxy Overrides:
I just helped my Dad set up his computer with a new
cable modem, and had the situation where we couldn't
access any secure Web sites. The cable folks had us
disable the proxy. It looks like the error message is
saying it can't find your proxy server, and the logs
you posted say that you've decided to configure your
proxy manually, rather than using the settings from
IE (which is how mine is set up in the plugin
control panel.)
Could that be the problem?
--Steve

Plotting an X,Y graph in a Java Applet

Similar Messages

Maybe you are looking for