Pls Explain About Iboats In Obiee step by step

Hai
Pls explain Step by Step for i boats so That i can follow the steps and practice according to that
Sekhar.P

Hi,
Your requirement will be fullfilled by sub-contracting process, the steps are described in below lines:-
u2022 Create material in MM01
u2022 Create BOM in CS01
u2022 Have routing in CA01
u2022 Create sub-contracting PO with item category L - subcontracting for external procurement in ME21N, with confirmation control as inbound delivery.
u2022 Transfer goods to subcontractor with movement type 311E, using t.code ME2O. (Create an outbound delivery)
u2022 Create excise challan J1IFQ
u2022 Receive the goods from subcontractor via MIGO/ inbound delivery (Vl31n) if you have selected the confirmation control in PO.
u2022 Execute J1IFQ for reconciliation.
u2022 Update the challan via J1IF13.
Assign the sub-contracting delivery type to a shipping point under t.code OMGM.
hope this will help.
regards
Vivek.

Similar Messages

Can anyone pls explain about SSR in WebdynPro application?

Hi,
Am having the webdynpro code.I that code they are having one onclik event.When they are clicking on that button link they are returning SSR.handle(parameters).But i cud not found the definition of SSR.handle(parameters) function.Can anyone pls explain what exactly SSR and where they have the definition of that function?
Rgds,
Murugag

Hi,
SSR or server side rendering is a location-independent rendering method of the Webdynpro framework.Because of the strict separation of layout and content, the framework supports location-independent rendering (client-side versus server-side rendering). In other words, depending on the capabilities of the client device, an HTML page can be rendered either on the server or the client.
A simple browser (simple client) may not support client-side scripting or processing of XML transformations so this client may require that the server generate the HTML page before sending it to the browser. More powerful browsers (advanced clients) can inject the content into the page on the client using XML and JavaScript. This location independence is purely configuration driven and does not require modification to either the application code or the presentation code.
Just verify if your browser is javascript enabled or not.
Regards,
Satyajit.
Message was edited by: Satyajit Chakraborty

Pls explain about CIN

Hi,
Can anyone explain about header configuration in CIN SD is BASB or not?

CIN Configuration
1.1 Maintain Excise Registration
BasicSPRO Maintain Excise SAP Ref. IMG  Logistics general  tax on Goods Movements RegistrationsIndia setting
1.2 Maintain Company Code Settings
tax onIndia SPRO Basic setting SAP Ref. IMG Maintain Company Code Logistics general Goods Movements Settings
1.3 Maintain Plant Settings
SAP Ref. Logistics general tax on Goods Movements SettingsIndia  Basic setting SPRO Maintain PlantIMG
1.4 Maintain Excise Groups
Basic settingSPRO MaintainSAP Ref. IMG Excise Groups Logistics general  tax on Goods MovementsIndia 
1.5 Maintain Series Groups
tax on GoodsIndia  Basic setting SPRO SAP Ref. IMG Maintain Series Groups Logistics general Movements
1.6 Maintain Excise Duty Indicators
SAP Logistics general tax on Goods MovementsIndia  Basic setting SPRO Maintain Excise DutyRef. IMG Indicators
1.7 Maintain Subtransaction Type with Text
tax on GoodsIndia  SPRO Maintain Subtransaction Type SAP Ref. IMG  Logistics general Movements Basic settingwith Text
1.8 Determination of Excise Duty
SAP Ref. IMG Logistics general tax on GoodsIndia  Determination of Excise DutySPRO Select Tax Calculation Movements Procedure
1.9 Maintain Excise Defaults
IndiaSPRO Determination of ExciseSAP Ref. IMG Maintain Excise Logistics general  tax on Goods Movements DutyDefaults
1.10 Condition-Based Excise Determination
Logistics generaltax on Goods Condition-Based ExciseSPRO Define Tax Code for SAP Ref. IMG  Movements Purchasing DocumentsIndia Determination
1.11 Condition-Based Excise Determination
Logistics generaltax on Goods Condition-Based ExciseSPRO Assign Tax Code to SAP Ref. IMG  Movements Company CodesIndia Determination
1.12 Classify Condition Types
tax onIndia SPRO Condition-BasedSAP ExciseRef. IMG Classify Condition Types Logistics general Goods Movements Determination
1.13 Maintain Chapter IDs
SAP Ref. IMG Logistics general tax on Goods MovementsIndia  Master dataSPRO Maintain Chapter ids
1.14 Assign Users to Material Master Screen Sequence for Excise Duty
Logistics general tax on Goods MovementsIndia  Master dataSPRO  SAP Ref. IMG Assign Users to Material Master Screen Sequence for Excise Duty
1.15 Specify Excise Accounts per Excise Transaction
tax on Goods SPRO Specify Excise Accounts per Excise SAP Ref. IMG Logistics general Movements TransactionIndia Account determination
1.16 Specify G/L Accounts per Excise Transaction
Logisticstax on Goods AccountSPRO Specify G/L Accounts per Excise SAP Ref. IMG general Movements TransactionIndia determination
1.17 Incoming Excise Invoices
tax on GoodsIndia SPRO BusinessSAP TransactionsRef. IMG Incoming Excise Invoices Logistics general Movements
1.18 Define Processing Modes Per Transaction
SAP Logistics general  tax onIndia  Business TransactionsSPRO Define Processing ModesRef. IMG Goods Movements Per Transaction
1.19 Define Reference Documents Per Transaction
Logisticstax on Goods BusinessSPRO Define Reference Documents Per SAP Ref. IMG general Movements TransactionIndia Transactions
1.20 Maintain Rejection Codes
tax on GoodsIndia SPRO BusinessSAP TransactionsRef. IMG Maintain Rejection Codes Logistics general Movements
1.21 Specify Which Movement Types Involve Excise Invoices
SAPLogistics tax on GoodsIndia  Business TransactionsSPRO Specify WhichRef. IMG general Movement Types Involve Excise InvoicesMovements
1.22 Outgoing Excise Invoices
SAP Ref. Logistics general tax on Goods India Business Transactions Outgoing Excise Invoices SPRO AssignIMG Movements Billing Types to Delivery Types
1.23 Maintain Default Excise Groups and Series Groups
Logistics general India Business Transactions Outgoing Excise Invoices SPRO  SAP Ref. IMG  tax on Goods Movements Maintain Default Excise Groups and Series Groups
1.24 Subcontracting Attributes
SAP Ref. IMG Logistics general tax on GoodsIndia  Business Transactions SubcontractingSPRO Subcontrac Movementsting Attributes
1.25 Maintain Movement Type Groups
tax on GoodsIndia SPRO Business SAP Ref. IMG Subcontracting Logistics general Movements Transactions AttributesSubcontracting
1.26 Utilization Determination
tax on GoodsIndia SPRO BusinessSAP Ref. IMG Utilization Determination Logistics general Movements TransactionsUtilization
1.27 Specify SAPscript Forms
SAP Ref. IMG Logistics general tax on Goods MovementsIndia  Business Transactions Excise RegistersSPRO Specify SAPscript Forms
1.28 Number Ranges
tax on GoodsIndia  ToolsSPRO NumberSAP Ref. IMG Ranges Logistics general Movements
1.29 Message Control
tax onIndia  ToolsSPRO Message SAP Ref. IMG  Logistics general ControlGoods Movements

Can anybody explain about MM data extraction with steps.

Hai everybody!
Right now i got an opportunity to work with MM datasource extraction by using LO cockpit in BI7.0. But I never worked in this
module.Pls can anybody explain how can i deal this datasource
and how can i migrate data into SAP BI. Pls give steps and explanation.
Warm Regards
Ravi.

Hi,
Pls search SDN BI forum, you will get a lot of info about this.
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
/community [original link is broken]
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
Regards
CSM Reddy

Pls explain sales order stock step by step with t-codes

Hi friends,
can anybody explain the step by step procedure for configuring sales order stock.
Stock that is used for a sales order. It is directly allocated to a sales order. Components can only be used to produce material ordered by the customer and the finished product can only be delivered to the customer via the sales order.
You can manage valuated or non-valuated sales order stock.
If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements.
but i am not clear of how to map it into sap.kindly explain it step by step.

thank you

OBIEE step by step guide

Hi guys,
Please I will appreciate it if anyone could provide me with a very good OBIEE manual with a simple step by step guide for it's functional usage
I am not looking for the installation guide but one that simply guides you from creating a new repository to uploading and processing in Business Intelligence platform.
Regards
Ify

I'm not sure about your current obi version.
The below is using 11g admin tool, you got everything here.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/biadmin11g_02/biadmin11g.htm
Pls mark as correct.

Explain about high water mark and low watermark

explain about high water mark and low watermark?

biju2012 wrote:
Here are a few links..
http://www.orafaq.com/tuningguide/
Look at Analysing problem SQL > Data Storage Problems > High Water Mark
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:575223085419
I checked both those links, and neither says anything about a "low water mark". One link has a copyright notice of 2003, the other starts with a question about 8.1.6.
Given the nature of the question I think we should be allowed to guess that the OP is probably thinking about the "low high water mark" and "high high water mark" that applies to segments using ASSM (automatic segment space management).
Under ASSM, Oracle doesn't format blocks for use in absolute order, it will pick batches of blocks (typically 16 - unless that's changed fairly recently) in the most recently allocated extent. This means that you can end up with some UNFORMATTED blocks near the start of the extent with some FORMATTED blocks later in the extent.
The "low high watermark" is the last block below which there are no UNFORMATTED blocks; the "high high watermark" is the block above which there are no FORMATTED blocks. Looking at it another way - between the low and high high watermarks you may find both formatted and unformatted blocks, but this condition doesn't exist anywhere else in the segment.
Regards
Jonathan Lewis

Hi , friends pls explain abap mapping and message mapping

1) pls explain abap mapping and message mapping
send me screen shorts also.

Hi
Mapping Techniques
XI provides 3 standard ways of interface mapping between source and target.
Graphical mapping
Java Mapping
XSLT Mapping
Two more additional mapping types can be activated in XI by making changes to the exchange profile. Those two mappings are
ABAP mapping
XSLT mapping with ABAP Extensions
Graphical Mapping
Graphical mapping is a common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It hardly involves coding. (Exception - User defined functions). But sometimes with graphical mapping it is difficult to produce required output. For example ... text/html output, namespace change, sorting or grouping of records etc.
ABAP Mapping
A person comfortable with Object Oriented ABAP can go for ABAP mapping instead.
Java Mapping
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
XSLT Mapping
One can also think of Java mapping as another option but it is a bit complex and required knowledge of Java. In such cases, XSLT mapping can be the best approach to meet the requirements.
A few example cases in which an XSLT mapping can be used:-
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)\
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
File content conversion at receiver side can be avoided in case of text or html output.
Multiple occurrences of node within tree (source XML) can be handled easily.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
XSLT program become lengthier as source structure fields grows in numbers.
XSLT program sometimes become complex to meet desired functionality.
Some XSL functions are dependent on version of browser.
Different types of Mappings
MAPPING SUPPORTED BY XI
Message Mapping -> Graphical Design and testing environment. Default Provided By XI. Queue based modelling allow handling or large documents. Extensible via user defined functions
XSLT Mapping - > Based on openstandard, Portable across application platform, Extensible using user defined functions kewl but disadvantage is Memory overload while handling large documents.
SAX -> Simple Api For XML. -> Allows you to parse through a XML document. Doesn't consume any memory. But the message can be parsed only once from top to bottom. It Has evolved by contributions made by group of ppl itz a open architecture.
DOM -> Document Object Model -> Itz designed by W3C. Consumes Memory as the message will be loaded. Allows parsing of document in both way top down and bottom up.
Send me your email id.Shall send you very good docs for both ABAP Mapping and message mapping.
Thanks

Can anyone explain me step by step procedure for creating badi?

hi all,,
Can anyone explain me about badi with step by step procedure with an example like trsn code mm01, xd01 etc.
And what is the significance of badi?
regs
hari

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
 IF l_s_eban-estkz NE 'B'.
 CLEAR v_mtart.
 SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
 IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
 MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
 ENDIF.
 ENDIF.
 IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
 IF l_s_eban-knttp NE 'A'.
 IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
 MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Regards
Anji

Kindly explain the step by step procedure for configuring sales order stock

Hi friends,
can anybody explain the step by step procedure for configuring sales order stock.
Stock that is used for a sales order. It is directly allocated to a sales order. Components can only be used to produce material ordered by the customer and the finished product can only be delivered to the customer via the sales order.
You can manage valuated or non-valuated sales order stock.
If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements.
but i am not clear of how to map it into sap.kindly explain it step by step.
regards,
willaims

Follow the link
this will explain about complete config
http://help.sap.com/bp_bblibrary/600/Documentation/V4J_BB_ConfigGuide_EN_US.doc

I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with jpeg only

I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with lightroom 5 with jpeg only
Arieh Gertler
[email protected]

You can do just about anything with a JPEG image that you can with a raw image. The advantage of working with raw is that it is possible to work with more extremes in exposure. More highlights and shadows can be recovered in a raw image, but there is a lot that can be done with JPEG images as well. All of the library functions and keywording and all the other features of Lightroom can be used on JPEG images just as easily as they can be used on raw images.
Having said all that, you might be more comfortable using Photoshop Elements. Both programs have trial versions that you can use for 30 days to decide which one or whether both will work for you. It would probably be to your advantage to try them out and decide for yourself.

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

Pls explain usage of proxy.

1) pls explain usage of proxy and what is the abap proxy.
tell me step by step.

ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
ABAP CLIENT PROXY
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP SERVER PROXY
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
This material will help you a lot.
regards
Nisar

Hi give me step by step about BSP please no links i have all

Hi give me step by step about BSP please no links i have all
Thank you,
Jagrut BharatKumar Shukla

Hi
Example 1: A simple Hello World example
1. Go to SE80 or TOOLS->ABAP Workbench->Overview->Object Navigator.
2. Then go to BSP Application in Repository Browser
3. Give a name starting with Z and the click on display.
Click yes and then again a window will appear which asks for description of that BSP Application as shown below:
And then press Save button and give a package Name (give $TMP for local objects).
4. Now Right-Click on your BSP Application and create a Page
Give Page Name and description and page type as Page with Flow Logic. And then press Save Button.
Here in the LAYOUT portion some default code is written.
Delete this code and write your own code as shown below:
There is some default code written in the Layout section. Well replace this code by our own. In this first page we will use HTMLB to create the layout of the page. The extension that we use has to be specified. Well add the title and heading. Then well add the input field for the user to enter his/her name and a button which the user presses to go to the next page.
 The code written is
<%@page language="abap"%>
<%@extension name="Htmlb" prefix="htmlb" %>
<htmlb:content design="design2002">
 <htmlb:page title="first page to take in user's name" >
 <htmlb:group id = "group1"
 design = "sapcolor
bodyColor = "#44AACC"
 tooltip ="Tooltip for group1">
 <htmlb:groupBody>
 <htmlb:form>
 

 <h2 align="center">Enter your name</h2>
 
 
 <center>
 <htmlb:gridLayout cellSpacing = "0"
 cellPadding = "0
width = "50%"
 height = "20%"
 columnSize = "2"
 rowSize = "2"
 >
 <htmlb:gridLayoutCell columnIndex = "1"
 rowIndex = "1"
 horizontalAlignment = "CENTER"
 >
 
 <htmlb:label id = "l_name"
 text = "User name"
 for = "user_name"
 design = "EMPHASIZED"></htmlb:label>
 
</htmlb:gridLayoutCell>
 <htmlb:gridLayoutCell columnIndex = "2"
 rowIndex = "1"
 horizontalAlignment = "CENTER"
 >
 <htmlb:inputField id ="user_name"
 value = "<%= user_name %>"
 />
 </htmlb:gridLayoutCell>
 </htmlb:gridLayout>
 
 <htmlb:gridLayout cellSpacing = "0"
 cellPadding = "0"
 width = "50%"
 height = "20%"
 columnSize = "1"
 rowSize = "2"
 >
 <htmlb:gridLayoutCell columnIndex = "1"
 rowIndex = "1"
 horizontalAlignment = "CENTER"
 >
<htmlb:button id = "b_next"
 text = "NEXT"
 onClick = "onInputProcessing(b_next)"></htmlb:button>
 </htmlb:gridLayoutCell>
 </htmlb:gridLayout>
 
 
 </center>
 </htmlb:form>
 </htmlb:groupBody>
 </htmlb:group>
</htmlb:page>
</htmlb:content>
Now activate both the application and Page by pressing on the ACTIVATE button.
6. To call your BSP application press F8 or click test Button from
Your BSP Application, a window asking for user-name and password will appear :
Give SAP user-name and password and the press OK.
Example2: Displaying Database tables
For displaying tables from your BSP Application follow points 1 to 5.
In order to display a database table, you need to create an internal Table, select entries from database table to this internal table and then finally display the internal table.
1. Create an internal table by clicking Page Attributes TAB and
Then declare your internal table as shown below:
2. Now for selecting entries from database table, Go to
Event Handler TAB then go to OnInitialization event and write
the code for selecting entries from database table into the
internal table
3. Finally write the code in layout for displaying the table
Activate both the application and the page and then run the application as explained above
Thanks & regards
Ravish Garg
+
*If you find it useful, plz reward points+

Pls Send me Step by Step procedure for a Smartforms

hi all ,
 pls send me Step by step procedure for a Smartform creation or PPT to This Email id : [removed by moderator]
thanks in advance
rgds
rafi.v

hi mahammad rafi,
u can read this,
smart forms
Introduction to SAP SmartForms
What is SAP Smart Forms?
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all
cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic
are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via
a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At
runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals,
and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks
whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use
background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can
suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in
minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure
(tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for
graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content
and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content
from R/3 to an external product without passing any layout information about the Smart Form.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is
necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with
data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
A Simple Smartform Tutorial
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms
support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic
ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive
conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
 Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
 Global settings :
 Form interface
 Variable name Type assignment Reference type
 ITAB1 TYPE Table Structure
 Global definitions
 Variable name Type assignment Reference type
 ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
 e.g. HD_GEN for printing header details,
 IT_GEN for printing data details.
 You have to specify the Line Type in your Text elements in the Tabstrips Output options.
 Tick the New Line and specify the Line Type for outputting the data.
 Declare your output fields in Text elements
 Tabstrips - Output Options
 For different fonts use this Style : IDWTCERTSTYLE
 For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
 http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
 INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Additional Fonts for your SMARTFORMS
You can create additional fonts and style with transaction SMARTSTYLES
This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form.
The character formats includes effects such as superscript, subscript, barcode and font attributes.
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
Contributed by : SAP ABAP/4 Programming, Basis Administration, Configuration Hints and Tips
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format.
In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are
working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a
particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to
create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up
the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is
printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is
something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
FAQ on Migrating SAPscript to SmartForms
Is it possible to migrate a SAPscript form to a Smart Form?
Smart Forms provides a migration tool for this purpose which migrates layout and texts of a SAPscript form to a Smart Form. It does not
migrate SAPscript form logic of the print program. Using Smart Forms, this logic is described by the tree structure of the Form Builder. The
effort involved in migrating it depends on the complexity of the print program.
Which Basis Release do I need to use SAP Smart Forms?
SAP Smart Forms is available as of R/3 Basis Release 4.6C.
I have heard that Smart Forms replaces SAPscript. What does "replace" mean?
It does not mean that SAPscript is removed from the Basis shipment. Even as of Basis Release 4.6C, SAPscript remains part of the SAP
standard and there are no plans to remove it. Since Smart Forms is currently, and will continue to be, the tool for form maintenance for
mySAP.com solutions, our further development efforts will focus on Smart Forms, not on SAPscript.
Do we have to migrate all SAPscript forms to Smart Forms?
There is no point in migrating all SAPscript forms already in use. Since SAPscript can still be used and will be available in the future, there is
no need to. If you plan to migrate a SAPscript form, it is recommended that you check whether benefit is worth the effort involved.
Conversion of SAPSCRIPT to SMARTFORMS
SAP provides a conversion for SAPscript documents to SMARTforms.
This is basically a function module, called FB_MIGRATE_FORM. You can start this function module by hand (via SE37), or create a small ABAP
which migrates all SAPscript forms automatically.
You can also do this one-by-one in transaction SMARTFORMS, under
Utilities -> Migrate SAPscript form.
You could also write a small batch program calling transaction SMARTFORMS and running the migration tool.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the
corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in
the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the
user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all
form outputs are included in an output request
Smart forms Frequently Asked Questions
Forcing a page break within table loop
Create a loop around the table. Put a Command node before the table in the loop that forces a NEWPAGE on whatever condition you want.
Then only loop through a subset of the internal table (based on the conditions in the Command node) of the elements in the Table node.
Font style and Font size
Goto Transaction SMARTSTYLES.
There you can create Paragraph formats etc just like in sapscript.
Then in your window under OUTPUT OPTIONS you include this SMARTSTYLE and use the Paragraph and character formats.
Line in Smartform
Either you can use a window that takes up the width of your page and only has a height of 1 mm.
Then you put a frame around it (in window output options).
Thus you have drawn a box but it looks like a line.
Or you can just draw "__" accross the page and play with the fonts so that it joins each UNDER_SCORE.
Difference between 'forminterface' and 'global definitions' in global settings of smart forms
The Difference is as follows.
To put it very simply:
Form Interface is where you declare what must be passed in and out of the smartform (in from the print program to the smartform and out
from the smartform to the print program).
Global defs. is where you declare data to be used within the smartform on a global scope.
ie: anything you declare here can be used in any other node in the form.
Smartforms function module name
Once you have activated the smartform, go to the environment -> function module name. There you can get the name of funtion module
name.
The key thing is the program that calls it. for instance, the invoice SMARTFORM LB_BIL_INVOICE is ran by the program RLB_INVOICE.
This program uses another FM to determine the name of the FM to use itself. The key thing is that when it calls this FM (using a variable to
store the actual name), that the parameters match the paramters in your smartform.
Another thing to note is that the FM name will change wherever the SF is transported to.
So you need to use the FM to determine the name of the SF.
Here is the code that can be use to determine the internal name of the function module:
Code:
if sf_label(1) <> '/'. " need to resolve by name
 move sf_label to externalname.
 call function 'SSF_FUNCTION_MODULE_NAME'
 exporting
 formname = externalname
 importing
 fm_name = internalname
 exceptions
 no_form = 1
 no_function_module = 2
 others = 3.
 if sy-subrc <> 0.
 message 'e427'.
 endif.
 move internalname to sf_label.
endif.
It checks to see if the sf_label starts with a '/', which is how the internal names start. if it does, the name has already been converted. If
not, it calls the FM and converts the name.
You would then CALL FUNCTION sf_label.
Smartforms FAQ Part Two
Smartforms output difference
Problem with Smartforms: in a certain form for two differently configured printers, there seem to be a difference in the output of characters
per inch (the distance between characters which gives a layout problem - text in two lines instead of one.
It happens when the two printers having different Printer Controls' if you go to SPAD Menu (Spool Administrator Menu) you can see the
difference in the Printer Control and if you make the Printer control setting for both the printers as same. then it will be ok. and also u have
to check what is the device type used for both the output devices.
SmartForms Output to PDF
There is a way to download smartform in PDF format.
Please do the following:
1. Print the smartform to the spool.
2. Note the spool number.
3. Download a PDF file (Acrobat Reader) version of the spool by running Program RSTXPDFT4 and entering the
noted spool number.
SmartForm Doublesided printing question
Your customer wants your PO SmartForm to be able to print "Terms and Conditinos" on the back side of each page. They don't want to
purchase pre-printed forms with the company's logo on the front and terms & conditions on the back. Now this presents an interesting
problem.
Has anyone else ever had a request like this? If for example there was a 3 page PO to be printed, they want 3 pieces of paper, the front
side of each to containe the PO information (page 1, 2, and 3) and the back side of each piece of paper to containg the static "Terms &
Conditions" information.
Anyone have a clue how to force this out?
Easy - page FRONT lists page CONTACTS as next page and CONTACTS lists FRONT as next page. Since CONTACTS does not contain a MAIN
window, it will print the contacts info and then continue on to FRONT for the rest of the main items. Additionally, set print mode on FRONT to
D (duplex) and set CONTACTS to 'blank' (for both resource name and print mode - this is the only way to get to the back of the page).
Transport Smart Forms
How does one transport SMARTFORM? SE01?
How do you make sure that both, the SMARTFORM & it's function module gets transported? Or does the FM with same name gets generated
automatically in the transported client?
A smartform is transported no differently than any other object. if it is assigned to a development class that is atteched to a transport layer,
it will be transported.
The definition is transported, and when called, the function module is regenerated.
This leads to an interetsing situation. On the new machine, it is very likely the function module name will be different than the name on the
source system. Make sure, before you call the function module, you resolve the external name to the internal name using the
'SSF_FUNCTION_MODULE_NAME' function module.
Typically, generate the SF, then use the pattern to being in the interface. Then change the call function to use the name you get back from
the above function module.
Smartforms: protect lines in main window.
How to protect lines in the main window from splitting between pages?
It was easy with SAPscript, but how to do it with SF's. For 4.7 version if you are using tables, there are two options for protection against
line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on
one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file
using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page
Protection option set are output on one page.
In 4.6, Alternatively in a paragraph format use the Page protection attribute to determine whether or not to display a paragraph completely
on one page. Mark it if you want to avoid that a paragraph is split up by a page break. If on the current page (only in the main window)
there is not enough space left for the paragraph, the entire paragraph appears on the next page.
Details information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the
logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP
support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as
the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format
language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most
important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on
the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not
normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses
specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to
support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP pri
regards..
seshu.

Pls Explain About Iboats In Obiee step by step

Similar Messages

Maybe you are looking for