UCCX 9.0(2) Custom reports with CUIC 9.0 issue

Hello.
I installed in our lab UCCX 9.0(2) and CUIC 9.0(1) with premium licenses. It's necessary for making custom reports used in CUIC.
I found this document:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/programming/guide/UCCX_BK_CFD16E30_00_cisco-unified-contact-center-express_chapter_0100.html and tryed make recomendations from it.
But I had a problem with prerequisites #6. I can't click "Edit" button, because it is inactive. I attach 2 screenshots: from pages "Datasource" and user configuration.
What could be the problem?
Regards,
Anton

Here's a summary so far:
Problem Description:
Unable to edit Data Source "UCCX" in co-resident CUIC.
Also, documentation required on CUIC Custom Reports.
Topology:
UCCX 9.0(2)
Resolution Summary:
Switched back to HRC, and then back to CUIC again. Datasource could be edited.
See the following sections of the CUIC user guide:
http://tools.cisco.com/squish/cddf8
Page 50,  "Custom Templates" and "Reports and Report Definitions".
Page 107, "Report Definitions".

Similar Messages

  • Creating custom reports with Pie Chart

    Hello,
    I've got a little problem while I'm creating custom reports with SQL Chart.
    For example, I want to have a Pie Chart that represent the distribution of the version for a software, i wrote my query with no problem, the result is in good format.
    My Pie Chart is fine except there are no percentage displayed. The legend on the right is fine with correct count of different version, but no percentage on the pie chart.
    Any idea?
    Thanks in advance,
    Fab

    Hello,
    well, I think this is not possible to ask OEM to print the percentage over the chart.
    Anyway, I sugget you to rewrite your query to compute the % in the query itselft thus to have the pct displayed on the rigth.
    Let's say you want to display the database files' size with such a query: select file_name name,bytes val from dba_data_files;
    This is the way to display the % of each file size over the total (remark the above query has been embeded in the new one).
    select name,ratio_to_report(val) over() pct
    from ( select file_name name,bytes val from dba_data_files )
    order by val desc
    It is quite easy to adapt such a tip to your own query.
    Regards,
    Noel Talard

  • Enhancing Customer Reports with Commands and Parameters

    Hi All,
    I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "<b>Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US</b>". Has anyone faced the problem, can anyone please help to remove this runtime error.
    Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
    Regards
    Poonam

    <i>True, the application property service is apparently not to be used for a real-life scenario</i>
    You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
    <i>in our case it forced the server down with deadlocks. </i>
    This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.
    <i>
    Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.
    </i>
    The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
    <i>Could you provide me with a link to the documentation for the logging framework?</i>
    <a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0.

  • Custom report with  FAGLFLEXA and "Document type"

    We have new GL and we must do a custom report like this:
    Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy 
    Profit centre 1_____________________ c1_______________d1
    Profit centre 2_____________________ c2_______________d2
    ect. ....
    The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
    The "Document type" is what worries me.
    I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table  FAGLFLEXT not contain the field "document type").
    The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
    Please, help me what exactly to do?My questions are these?
    My principals questions are these:
    1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
    2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
    3.  If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
    All suggestions are welcome.
    Thank you in advance. Many points to assign who will help me to solve this problem

    I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
    http://smlets.codeplex.com/

  • How to generate custom report with PDF output?(Payables)

    Hi All,
    we are using some custom reports in payables modual production server the reports are working fine .
    my question is i need creat same reports in test server i have done following activities.
    1. copied rdf file from prod server and pasted into test server
    2.given excutable name in system administrator modual(concurrent-progrem-excutable)
    3.define report in system administrator modual(cocurrent-program-define) output selected PDF and given parameters.
    4. switch to payables moduale run the report ,following error showing in log file plese help how to resolve it we don,t have any custom reports in test server this is first time to creat the report.
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    /APPS/dkvuatora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to: /APPS/dkvuatora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Spawned Process 2707514
    X connection to oraclefinof1:0.0 broken (explicit kill or server shutdown).
    Report Builder: Release 6.0.8.25.0 - Production on Wed Nov 18 16:06:17 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 339487.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 19-NOV-2009 16:24:52
    ---------------------------------------------------------------------------

    Hello.
    Have a look to Metalink Doc ID 252715.1
    You have to login to server and issue the 'xhost +' command.
    Hope this helps.
    Octavio

  • Custom Report with Problems and incidents

    I'm trying to create a custom report of all problems and related incidents.  I can query the problemDimvw table, but I need some assistance linking to the incidents.  Anyone have a query or point me in a direction to join the necessary tables?
     What I'm trying to get is Problem ID, Title, Description, and Incident IDs linked to it.  Thanks.
    Chris

    I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
    http://smlets.codeplex.com/

  • SCSM2012 R2 Custom Reports with Weekly and monthly schedule to email

    Hi
    I am able to pull standard ListofIncidents Reports, want a similar kind of report with a Weekly and monthly scheduled reports to email, I have tried using pull reports from Cubes to Excel and do a custom reports but is not showing like standard ListofIncidents
    Reports. Could you please guide me on this.
    Thanks and Regards,
    Pradeep Kumar
    Pradeep Kuimar

    Hi,
    Would you please check the articles below regarding to publishing and Subscribing to Service Manager Reports:
    http://blogs.technet.com/b/servicemanager/archive/2010/06/30/publishing-and-subscribing-to-service-manager-reports.aspx
    How to Schedule a Standard Service Manager Report
    https://technet.microsoft.com/en-us/library/hh519682.aspx
    Hope this can be helpful for you!
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Custom report: Serial number of material issue in PM order

    Hi,
    I want make customized report. please can you help on this.
    requrment is: I wan to trace the serial number for the materials issued  in PM order . please let me know how to go ahead and achive this?
    regards
    krish

    Krish,
    Have a look at the SER* tables via TCode SE16
    PeteA

  • Customer Report with multiple conditions?

    Hello <<text removed>>
    I have a project that I am curious if it is possible using BW and BEx Analyzer.
    I have a Cube that contains Customer, Brand, Revenue etc....
    Lets say i have the following values
    Customer: 1,2,3,4,5,6
    Brand:      1,2,3
    I need a report, series of reports, or a workbook that can provide the following.
    a. List and count of customers that purchased $500+ of only Brand 1
    b. LIst and count of customers that purchased $500+ of only Brand 2
    c. List and count of customers that purchased $500+ of only Brand 3
    d. List and count of customers that purchased $500+ of Brand 1 and $500+ of Brand 2
    e. List and count of customers that purchased $500+ of Brand 1 and $500+ of Brand 3
    f. List and count of customers that purchased $500+ of Brand 1, $500+ of Brand 2 and $500+ of Brand 3.
    I think you get the point
    This report should look at the previous 12 months of data.  And the Customer should not appear on the report more then once because that is how the criteria presented above should work.
    I was able to get this to work for a,b,c by restricting a query to the brand and using a condition of $500+ for revenue
    I was also able to get this to work for d and e by using the resolution for the single brand as a value set as input for the dealers in a similiar query restricted to a different brand.
    Anyway I hope i can find some ideas/approaches that would meet this requirement!
    Thank you,
    Nick
    Edited by: Matt on Jan 13, 2011 9:06 AM

    Hi Nick,
    See if this works.......
    Put customer in Rows.
    Create 3 restricted key figures for Revenue one with each brand. gets difficult if you want to do this for many brands...
    Create a calculated key fig and use the expression revenue_rkf1 > 500. this expression in the calc key fig returns 1 if revenue is > 500, othewise returns 0. Similarly create 2 more CKFs with expressions using the other RKFs for revenue.
    Now report may look like this:
    Customer      brand1         brand2          brand3
    Cust1...........            0..........                   1............                    1
    Cust2...........            1..........                   1...........                     0
    Now add logic to get customers who bought brand 1 > 500 and brand2 > 500 and other combinations. For that create different formulas like brand1brand2, brand 2brand3, brand1brand3, brand1brand2+brand3.
    Now report may look like this:
    Customer      brand1         brand2          brand3     for1        for2       for3       for4
    Cust1..........0............1..........1........1......2....1.....2
    Cust2..........1............1..........0........2......1....1.....2
    cust3..........1............1..........1........2.......2....2.....3
    Now create 4 calc key figures. In CKF1 use expression for1 > 1. This checks if value in formula1 is greater than 1, if yes puts 1 otherwise 0. Use the same expression for CKF2 and CKF3 using for2 and for3. Create CKF4 with expression for4 > 2.
    Now the report looks like this:
    Customer      brand1         brand2          brand3     for1        for2       for3       for4    CKF1      CKF2     CKF3       CKF4
    Cust1...........0...........1...........1.......1......2.....1.....2......0........1.......0........0
    Cust2...........1...........1...........0.......2......1.....1.....2......1........0.......0........0
    cust3...........1...........1...........1.......2......2.....2.....3......1.........1.......1........1
    Count of CKF1 gives the number of customers who bought brand1 for 500+ usd and brand2 for 500+ usd.
    Count of CKF4 gives the number of customers who bought all brands for more than 500 $ each.
    The repot gives the data needed but may not look good with number display against customers.
    Regards,
    Murali.
    Edited by: Murali Krishna K on Jan 7, 2011 10:52 AM
    Edited by: Murali Krishna K on Jan 7, 2011 11:10 AM

  • Creating a custom report with detailed header and then associated detail

    I am very new to CRMOD, so this question may be basic, but I have not found any good material yet to help me out, so here goes.
    We are trying to create a Quote report that will be sent to our customers. The report needs to have both a header and detail section basically as follows:
    <Header>
    Quote Form
    Date:
    Expiration Date:
    Sales Person Name:
    Customer Name and address
    Terms
    ... some other text data ...
    <Detail>
    Standard fields that define the quote, these are easy.
    What I cannot determine how to do is create the header section. In the report designer, it only allows for a Title, logo, and another text line. Can anyone suggest another method?

    I do not have the narrative option.
    Options available are:
    Title
    Table
    Chart
    Pivot Table
    Gauge
    Active Filters
    legend
    Advanced
    --> Column Selector
    --> View Selector
    --> Funnel Chart
    --> Ticker
    According to the documentation, the narrative view should be available from the advanced menu. Am I on a different package by chance?

  • Custom Report with 3 Header lines and three separate detail lines

    Need help in creating a report:
    Objectives - break on hidden first field with a horizontal line for the separator (no summing)
    Expand/collapse detail lines with resetting pagination for that page based on this action. (1-15 select list)
    Header 1 Header 2 Header3 Header4 Header5 Header6
    Header 1a Header2a Header3a Header6a
    Header3b Header4b Header5b
    (-)Detail1 field Detail1 field Detail1 field Detail1 field Detai1l field Detail1 field
    (-)Detail2 field Detail2 field Detail2 field Detail2 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    (-)Detail2 field Detail2 field Detail2 field Detail2 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    (-)Detail1 field Detail1 field Detail1 field Detail1 field Detail1 field Detail1 field
    (-)Detail2 field Detail2 field Detail2 field Detail2 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    Detail3 field Detail3 field Detail3 field Detail3 field
    (+)Detail2 field Detail2 field Detail2 field Detail2 field
    (-) = collapse ; (+)= expand
    Edited by: user1073751 on Sep 23, 2010 6:30 PM

    Hi cupboy1,
    According to your description, you want to design your report as the screenshot your post and hide the detail row until select in top parent group. Right?
    In this scenario, we can design the report as you have done by yourself, then delete the column (Label), but still keep the Label group, then add a column left of Disc, put the data field into appropriate textbox. You can get the same effect as your first
    screenshot. And we can hide the detail rows and set them toggled by Artist. We have tested your case in our local environment. Here are steps and screenshots for your reference:
    1. Create a table. Drag Disc into textbox, add parent group with header (group on Label) for Disc, add parent group with header (group on Artist) for Label.
    2. Delete the column Label, add a column left of Disc.
    3. Right click on detail rows, select Row Visibility. Set hide and toggled by Artist.
    4. Save and preview. It looks like below:
    Reference:
    Row Visibility Dialog Box (Report Builder)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to generate a customized report with a table

    I have a table with two columns: month, count. The values are like the following:
    Jan-2007 50
    Feb-2007 46
    Mar-2007 55
    Apr-2007 76
    Jan-2009 67
    Feb-2009 86
    Mar-2009 55
    I want to generate a report like this:
    Month 2007 2008 2009
    January 50 76 67
    Febuary 46 45 86
    How to do that?
    Thanks.
    Jen

    Jen,
    This is the best way I could come up with. It is a little clunky but it gets the job done. Basically it buckets each group by month and then unions each month together. I used the column names and formats you specified so you should only have to change the table name.
    EDIT
    You may want to do a nvl on each decode that way the sums will work correctly for nulls. Also, you could generate this sql statement procedurally and save yourself some maintenance time. This was just to show you how it could be approached.
    SELECT 'January' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE substr(month,1,3) = 'JAN'
      GROUP BY 'January'
    UNION ALL
    SELECT 'February' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE UPPER(substr(month,1,3)) = 'FEB'
      GROUP BY 'February'
    UNION ALL
    SELECT 'March' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE substr(month,1,3) = 'MAR'
      GROUP BY 'March'
    UNION ALL
    SELECT 'April' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE UPPER(substr(month,1,3)) = 'APR'
      GROUP BY 'April'
    UNION ALL
    SELECT 'May' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE substr(month,1,3) = 'MAY'
      GROUP BY 'May'
    UNION ALL
    SELECT 'June' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE UPPER(substr(month,1,3)) = 'JUN'
      GROUP BY 'June'
    UNION ALL
    SELECT 'July' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE substr(month,1,3) = 'JUL'
      GROUP BY 'July'
    UNION ALL
    SELECT 'August' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE UPPER(substr(month,1,3)) = 'AUG'
      GROUP BY 'August'
    UNION ALL
    SELECT 'September' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE substr(month,1,3) = 'SEP'
      GROUP BY 'September'
    UNION ALL
    SELECT 'October' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE UPPER(substr(month,1,3)) = 'OCT'
      GROUP BY 'October'
    UNION ALL
    SELECT 'November' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE substr(month,1,3) = 'NOV'
      GROUP BY 'November'
    UNION ALL
    SELECT 'December' "Month",
           SUM(DECODE(substr(month,5,4),2000,count)) "2000",
           SUM(DECODE(substr(month,5,4),2001,count))"2001",
           SUM(DECODE(substr(month,5,4),2002,count))"2002",
           SUM(DECODE(substr(month,5,4),2003,count))"2003",
           SUM(DECODE(substr(month,5,4),2004,count))"2004",
           SUM(DECODE(substr(month,5,4),2005,count))"2005",
           SUM(DECODE(substr(month,5,4),2006,count))"2006",
           SUM(DECODE(substr(month,5,4),2007,count))"2007",
           SUM(DECODE(substr(month,5,4),2008,count))"2008",
           SUM(DECODE(substr(month,5,4),2009,count))"2009" FROM TYSON_TEST_TABLE
      WHERE UPPER(substr(month,1,3)) = 'DEC'
      GROUP BY 'December'Edited by: Tyson Jouglet on Mar 17, 2009 9:27 AM

  • GRC 10.0: Customizing Reporting with field ID's

    Hi everybody,
    we need some reports which are delivering some special information. These informations aren't exist in any of the standard reports. So we would like to customize them.
    I know there is a customizing table V_GRFNREPCOLUMN how to adjust the available reports and I do it like the instruction:
    1) Copy an existing report
    2) Check all the technical adjustments
    3) change the columns for this report
    But there is one problem: The field ID that I need is not available. There are more than 2000 field ID's but not the one that I need. I don't need a custom field because the information is still excisting in the data dictionary. I know the SAP table and the field ID.
    For example:
    We need a list/report where you could see all the control owners of every organisation. I couldn't found a report and I guess there is no one in the SAP standard. After copying a standard report I couldn't find the right field ID. There is one for owners of subprocess and processes and also one for cross regulation control owners, but not for the e.g SOX control owner.
    I try to search in which SAP databse table the information is saved. It is HRP1852. The field ID is (I guess) USERNAME, but this field ID is not available in the customizing of the reports.
    So is there a possibility to enlarge the range of the field ID's?
    We could programm our own report, but this would be too expansive and I just want to use the possibility of the standard report customizing.
    Thanks a lot
    Regards Timo

    Hi,
    I have just checked my SICF settings and found that we have not actually activated those services at all and our NWBC sessions work fine now.
    Have you activated the sap/bc/nwbc and sap/bc/webdynpro services?
    Also, have you activated the required BC sets for the standard content on Access Controls? This removes the need to do a lot of the basic setups but you still need to follow through the event linkages to check the successful generation etc.
    Simon
    Edited by: Simon Persin on Sep 21, 2011 5:51 PM

  • Customer Report with Sales Employee and Due date

    Hi,
    I need to configure a report for Customers with Sales Employee & Due date.is there any standard report for this combination in SAP or Do i need to Configure separate report for this.If i need to configure this -kindly help me with some guide lines to prepare this.It would be a great help if you provide some steps to configure this Report.
    Thanks in advance
    Suvarna

    Have you tried the txn code MC-Q or the report program RMCV0500.

  • Enhancing Customer Reports with Commands... On EP 7 SP 15??

    Has anyone had any luck implementing the the sample project, AccessStatisticApplication, on EP 7, SP 15?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0
    I am using, SAP NetWeaver Developer Studio Version: 7.0.15
    I believe I corrected the incorrect class paths, no errors are showing before I create the PAR file.
    When I go into Content Managment- Reports, the name of the report is showing "documents.statistic" instead of the "Document Access Report" like the example shows. There is also now description.
    When I try to start the report it... I get the following error:
    Exception class: class java.util.MissingResourceException
    java.util.MissingResourceException: Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US
            at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:838)
            at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:807)
            at java.util.ResourceBundle.getBundle(ResourceBundle.java:701)
            at com.sapportals.wcm.util.resource.ResourceBundles.getBundle(ResourceBundles.java:152)
            at com.sapportals.wcm.util.resource.ResourceBundles.getString(ResourceBundles.java:88)
            at com.sapportals.wcm.util.resource.ResourceBundles.getString(ResourceBundles.java:106)
            at com.sap.netweaver.km.stats.reports.DocumentAccessReport.getDescription(DocumentAccessReport.java:287)
            at com.sapportals.wcm.repository.manager.reporting.monitor.ReportComponent$ReportWrapper.getDescription(ReportComponent.java:256)
            at com.sapportals.wcm.repository.manager.reporting.types.RPReportHandler$DescriptionGen.getProperty(RPReportHandler.java:175)
            at com.sapportals.wcm.repository.manager.reporting.types.RPPropHandler.getProperties(RPPropHandler.java:110)
            at com.sapportals.wcm.repository.manager.reporting.types.RPPropHandler.getProperties(RPPropHandler.java:143)
            at com.sapportals.wcm.repository.manager.reporting.RPPropertyManager.getProperties(RPPropertyManager.java:83)
            at com.sapportals.wcm.repository.ResourceImpl.internalGetProperties(ResourceImpl.java:3773)
            at com.sapportals.wcm.repository.ResourceImpl.internalGetPropertiesExtended(ResourceImpl.java:1327)
            at com.sapportals.wcm.repository.ResourceImpl.getProperties(ResourceImpl.java:1292)
            at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:425)
            at com.sapportals.wcm.service.resourcelistfilter.cm.ResourceListFilter.getChildren(ResourceListFilter.java:420)
            at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialfilter(AbstractRendererStatus.java:331)
            at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initializeSelectionList(AbstractRendererStatus.java:301)
            at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialize(AbstractRendererStatus.java:287)
            at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.setParent(AbstractRendererStatus.java:99)
            at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.createStatus(LightCollectionRenderer.java:911)
            at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.renderAll(LightCollectionRenderer.java:598)
            at com.sapportals.wcm.rendering.control.cm.NeutralControl.render(NeutralControl.java:164)
            at com.sapportals.wcm.rendering.layout.cm.MenuTreeListLayoutController.render(MenuTreeListLayoutController.java:127)
            at com.sapportals.wcm.rendering.control.cm.WdfProxy.render(WdfProxy.java:1831)
            at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
            at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
            at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
            at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
            at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
            at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
            at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
            at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
            at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
            at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
            at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
            at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
            at com.sapportals.wdf.WdfCompositeController.doInitialization(WdfCompositeController.java:282)
            at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:660)
            at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
            at com.sapportals.htmlb.Container.preRender(Container.java:120)
            at com.sapportals.htmlb.Container.preRender(Container.java:120)
            at com.sapportals.htmlb.Container.preRender(Container.java:120)
            at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:406)
            at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:237)
            at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:134)
            at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
            at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
            at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:77)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
            at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
            at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
            at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
            at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

    So another problem I encountered.
    Everything seemed to be working fine.
    When I ran the report on a KM rep, all values were populating fine. unique, count, last access.. etc...
    Then after adding the Repository Service to another KM rep, the whole thing stopped working.
    Now only the Modified State is populating correctly.
    Any ideas? Something to do with the Application Service... Or a KM setting I am guessing.
    I tried starting from scratch again. Removed the Repository services and report, re-uploaded the original PAR file and re-did all the setup work that I original had done to get it working.
    No go.
    Edited by: Paul Mikota on Jun 23, 2008 4:12 PM

Maybe you are looking for

  • Lightroom 1.2 not importing RAW (CR2) files from 40D

    Just upgraded to LR 1.2 and thought it would solve my problems but find that it doesnt appear to import CR2 files, either directly from a card reader or from a file already saved to the computer. It says files use an unsupported color mode. These wer

  • Can I get the BT Sport App if I order BT Sport on ...

    I'd just like a bit of help clarifying something up as i'm struggling to understand how this works, so i've looked at the FAQ about the BT Sport App and found this: Who can get the BT Sport App? The BT Sport App and online access at btsport.com is in

  • About DAQ task and writing to a line

    Hi all,   I swtich from Labview to Labwindows and switch from traditional DAQ to DAQmx. I have two questions about using the DAQmx. Based on the example from NI, I write a function for a single sample output to a single digitial line void WriteLine(i

  • How is Web-dynpro ABAP application is accessed in web.

    Hi How are pages in ABAP-Webdynpro rendered in web, how does they get converted in HTML. As far as my understanding, ICM forwards the request to Application server ABAP, if request is for ABAP webdynpro page. After that does ITS play a role to render

  • How to delete users in PRD

    hi friends, In my production server , we want to create new user's with copy of existing users.After that we are planing to delete those user as per  user Licenses. Please suggest me how to proceed this in my PRD server. Its an urgent requirement. Ta