Plsql block error
I have small PLSQL block with a bind variable in it which throws an error on its execution.
declare
cursor c1 is select product_name from PRODUCTS where month=:m;
begin
for i in c1 loop
dbms_output.put_line(i.product_name);
end loop;
end;
It thows the error
ORA-01008: not all variables bound
Is it not possible to have a bind variable in a cursor?
Please help
Regards
If you're using SQL*Plus you need to declare and set the bind variable...
SQL> set serverout on;
SQL> var d number;
SQL> exec :d := 20;
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.07
SQL> ed
Wrote file afiedt.buf
1 declare
2 cursor c1 is select ename from emp where deptno=:d;
3 begin
4 for i in c1 loop
5 dbms_output.put_line(i.ename);
6 end loop;
7* end;
SQL> /
SMITH
JONES
SCOTT
ADAMS
FORD
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.06
SQL>
Similar Messages
-
Am facing this error sqlcode :-6502 while running sql code in plsql block
Am facing this error sqlcode :-6502 while running sql code in plsql block.
am using query :
SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) FROM DUAL;
CAN any body tell me why.BD_Fayez wrote:
I've tried the following, but don't get any error.As I mentioned, most likely variable is too short:
SQL> declare
2 strSub varchar2(2);
3 begin
4 SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) into strSub FROM DUAL;
5 dbms_output.put_line(strSub);
6 end;
7 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 4
SQL> SY. -
Using Execute Immediate in PLSQL block Vs Stand alone procedure
I am facing very unusual ( atleast unusual to me ) with usage of "Execute Immediate" statement.
I have a table dynamic_sql with one column plsql_block as VARCHAR2(4000);
I have stored some PLSQL blocks ('DECLARE ..... BEGIN.... END.... ) in this column .
Now I want to execute these PLSQL blocks one after other depending on certain conditions .
In order to archive this I wrote a PLSQL block as below
DECLARE
Cursor c1 is
select plsql_block from dynamic_sql
begin
for irec in c1
loop
<<< Condition >>>
begin
execute_immediate(irec.plsql_block);
exception
when others then
raise_application_error(-20001,'error ' ||irec.plsql_block||' '||sqlerrm);
end loop ;
end ;
With above PLSQL block , "execute immediate" is executing PLSQL block successfully without any error
But When I converted above PLSQL block into standalone procedure as shown below , I am getting error .
CREATE OR REPLACE procedure test AS
Cursor c1 is
select plsql_block from dynamic_sql
begin
for irec in c1
loop
<<< Condition >>>
begin
execute_immediate(irec.plsql_block);
exception
when others then
raise_application_error(-20001,'error ' ||irec.plsql_block||' '||sqlerrm);
end loop ;
end ;
BEGIN
test;
end ;
It is showing the value of irec.plsql_block but not showing sqlerrm...
I found this is very unusual as I am able to execute "execute immediate" statement with PLSQL block but not with similar procedure .
can anybody explain me why this is happening?
Thanks in Advance
AmitHello,
It doesn't make any sense to add SQLERRM for user defined exception, unless you want to raise application error for already defined error (e.g NOT_DATA_FOUND, ..)
Check following piece of code and its output,
CREATE OR REPLACE PROCEDURE myinsert1
AS
v_count NUMBER;
v_sql VARCHAR2 (300);
BEGIN
v_sql :=
'INSERT INTO ENTITY_EMPLOYEE VALUES(0,''TIM'',''LASTNAME'',10000)';
BEGIN
EXECUTE IMMEDIATE v_sql;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE (SUBSTR (SQLERRM, 1, 300));
RAISE_APPLICATION_ERROR (-20002, 'My Error ' || SQLERRM, TRUE);
RAISE;
END;
END;
Output._
ORA-20002: My Error ORA-00001: unique constraint (ENTITY_EMPLOYEE_PK) violated
ORA-06512: at "MYINSERT1", line 21
ORA-00001: unique constraint (ENTITY_EMPLOYEE_PK) violated
ORA-06512: at line 2
Regrds -
Output parameter in plsql Block fails
Hello. I am testing using an anonymous Plsql block with one in and out parameter. The in parameter work fine but when I add the out, the plsql block fails.
This is my environment on a Windows 7 client attaching to a Solaris server. I am using Powershell 3.0, but it is very similar to #c. I have a .net framework of 4.5.
PS L064217> $GAC = $Env:Oracle_Home + "\" + "ODP.NET\bin\4\Oracle.DataAccess.dll"
PS L064217> [Void] [Reflection.Assembly]::LoadFile($Gac)
PS L064217> [Reflection.Assembly]::LoadFile($Gac)
GAC Version Location
True v4.0.30319 C:\windows\Microsoft.Net\assembly\GAC_64\Oracle.DataAccess\v4.0_4.112.3.0__89b4
SQL*Plus: Release 11.2.0.3.0 Production on Wed Nov 28 19:09:57 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsHere is a sample of my test code:
# Define Plsql Anonymous Block
$Table1 = 'AdvSearch_Statutes'
$Table2 = ($Table1).Substring(0, $Table1.Length-1) + '_Docs'
$Caml_Doc_Id = 'CHP201500010'
$Sql = " DECLARE "
$Sql += " vCamlId VARCHAR2(30) := ':Param1' "
$Sql += " vPath_Tx VARCHAR2(200); "
$Sql += " vDelRows_Nr PLS_INTEGER := 0; "
$Sql += " CURSOR Docs_Cur IS "
$Sql += " SELECT XPath "
$Sql += " FROM $Table2 "
$Sql += " WHERE Caml_Doc_Id = vCamlId; "
$Sql += " BEGIN "
$Sql += " OPEN Docs_Cur; "
$Sql += " LOOP "
$Sql += " FETCH Docs_Cur INTO vPath_Tx; "
$Sql += " EXIT WHEN Docs_Cur%NOTFOUND; "
$Sql += " IF (DBMS_XDB.ExistsResource(vPath_Tx)) "
$Sql += " THEN "
$Sql += " DelRows_Nr := DelRows_Nr + 1; "
$Sql += " DBMS_XDB.DeleteResource(vPath_Tx, DBMS_XDB.DELETE_RECURSIVE_FORCE); "
$Sql += " END IF; "
$Sql += " END LOOP; "
$Sql += " DELETE FROM $Table2 WHERE Caml_Doc_Id = vCamlId; "
$Sql += " vDelRows_Nr := vDelRows_Nr + SQL%ROWCOUNT; "
$Sql += " DELETE FROM $Table1 WHERE Caml_Doc_Id = vCamlId; "
$Sql += " vDelRows_Nr := vDelRows_Nr + SQL%ROWCOUNT; "
$Sql += " SELECT vDelRows_Nr INTO :Param2 FROM Dual; "
$Sql += " EXCEPTION "
$Sql += " WHEN OTHERS THEN ROLLBACK; "
$Sql += " END; "
# Set up the Connection and command objects using the prior defined information. Ensure that
# Bind by name is used.
$Conn = New-Object Oracle.DataAccess.Client.OracleConnection($Connect_Str)
$Cmd = New-Object Oracle.DataAccess.Client.OracleCommand($Sql, $Conn)
$Cmd.BindByName = $True
#Set up the parameters for use with the Sql command.
$Param1 = New-Object Oracle.DataAccess.Client.OracleParameter
$Param2 = New-Object Oracle.DataAccess.Client.OracleParameter
$Param1.DbType = 'AnsiString'
$Param1.OracleDbType = 'Varchar2'
$Param1.Direction = 'Input'
$Param1.ParameterName = ':Param1'
$Param1.Value = $Caml_Doc_Id
$Param2.DbType = 'Int32'
$Param2.OracleDbType = 'Int32'
$Param2.Direction = 'Output'
$Param2.ParameterName = ':Param2'
[Void] $Cmd.Parameters.Add($Param1)
[Void] $Cmd.Parameters.Add($Param2)
# Open connection to database and execute the command
Try
$Conn.Open();
$Result = $Cmd.ExecuteNonQuery();
If ($Param2.Value -Eq $Null) {$Counts = 0}
Else {$Count = ($Param2.Value).ToString()}
Write-Host "Return Code: $Result"
Write-Host "Rows Deleted: $Counts"
Catch [System.Exception]
$Param2
Write-Host $_.Exception.ToString() -ForeGroundColor "Red"
Finally
$Conn.Close();
$Conn.Dispose();
"`nSuccessful end of script"
}I have some output. It all seems to be okay. I am following a book rather closely, but after several attempts changing one thing or another, I still cannot find a way to send an out value. I have commented out the " SELECT vDelRows_Nr INTO :Param2 FROM Dual; " and that is the problem statement. Thank you for your help. The first portion is the plsql being echoed back, then I list out what Param2 is defined at. The last bit is the error returned.
PS L064217> .\Test_Odp_PLsqlBlock.ps1
DECLARE vCamlId VARCHAR2(30) := ':Param1' vPath_Tx VARCHAR2(200); vDelRows_Nr PLS_INTEGER := 0;
CURSOR Docs_Cur IS SELECT XPath FROM AdvSearch_Statute_Docs WHERE Caml_Doc_Id = vCamlId; BEGIN
OPEN Docs_Cur; LOOP FETCH Docs_Cur INTO vPath_Tx; EXIT WHEN Docs_Cur%NOTFOUND; IF (DBMS_XDB.ExistsR
esource(vPath_Tx)) THEN DelRows_Nr := DelRows_Nr + 1; DBMS_XDB.DeleteResource(vPath_Tx, DBMS_XDB.DEL
ETE_RECURSIVE_FORCE); END IF; END LOOP; DELETE FROM AdvSearch_Statute_Docs WHERE Caml_Doc_Id = vCamlId; v
DelRows_Nr := vDelRows_Nr + SQL%ROWCOUNT; DELETE FROM AdvSearch_Statutes WHERE Caml_Doc_Id = vCamlId; vDelRows_Nr
:= vDelRows_Nr + SQL%ROWCOUNT; SELECT vDelRows_Nr INTO :Param2 FROM Dual; EXCEPTION WHEN OTHERS THEN ROLLBACK;
END;
DbType : Int32
SourceColumnNullMapping : False
Direction : Output
IsNullable : False
Offset : 0
OracleDbTypeEx : Int32
OracleDbType : Int32
ParameterName : :Param2
Precision : 0
Scale : 0
Size : 0
ArrayBindSize :
SourceColumn :
SourceVersion : Current
Status : Success
ArrayBindStatus :
CollectionType : None
Value :
UdtTypeName :
Oracle.DataAccess.Client.OracleException ORA-01036: illegal variable name/number at Oracle.DataAccess.Client.OracleEx
ception.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object sr
c, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
at CallSite.Target(Closure , CallSite , Object )Edited by: CRoberts on Nov 28, 2012 7:30 PMAs test
use NUMBER instead of PLS_INTEGER in PL/SQL
and
use Decimal instead of Int32 for Oracle parameter datatype -
Can I use Count, Max function in PLSQL BLOCK.
Can U help me to use count, max function in PLSQL BLOCK.
Because it is giving me error "It is a SQL function"SELECT COUNT(*)
INTO l_variable
FROM dual;
Will work inside PL/SQL -
PLSQL BLOCK TO RUN A TYPE PROCEDURE
I have created a type called bank_account which has many member functions and procedures to open ,close,deposit and withdraw.I have created a type body where these member functions are defined.i have created a table based on this type.
Now my problem is that the plsql block that i have written to call the member function open gives the following error:
method dispatch on NULL SELF argument is disallowed
the plsql block is as given below:
SQL> run
1 declare
2 amount real;
3 a bank_account(this is the type);
4 begin
5 amount:=&amount;
6 a.open(amount);
7 dbms_output.put_line('account opened');
8* end;
Enter value for amount: 5
old 5: amount:=&amount;
new 5: amount:=5;
declare
ERROR at line 1:
ORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at line 6
please help me to solve my problem
nullI have created a type called bank_account which has many member functions and procedures to open ,close,deposit and withdraw.I have created a type body where these member functions are defined.i have created a table based on this type.
Now my problem is that the plsql block that i have written to call the member function open gives the following error:
method dispatch on NULL SELF argument is disallowed
the plsql block is as given below:
SQL> run
1 declare
2 amount real;
3 a bank_account(this is the type);
4 begin
5 amount:=&amount;
6 a.open(amount);
7 dbms_output.put_line('account opened');
8* end;
Enter value for amount: 5
old 5: amount:=&amount;
new 5: amount:=5;
declare
ERROR at line 1:
ORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at line 6
please help me to solve my problem
null -
Unable to insert row in object table from plsql block
I have table called test based on an object type. When I issue an insert statement from sqlplus, the row is inserted. The exact same sql statement in a plsql block gives the error below. Any ideas? (it is not a constraint problem).
SQL> insert into test values( 3,2,1,1,'asp',1,'mach' );
1 row created.
SQL> begin
2 insert into test values( 3,2,1,1,'asp',1,'mach' );
3 end;
4 /
insert into test values( 3,2,1,1,'asp',1,'mach' );
ERROR at line 2:
ORA-06550: line 2, column 16:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-302: component 'DOCUMENT' must be declared
ORA-06550: line 2, column 4:
PL/SQL: SQL Statement ignored
(ddl)
CREATE OR REPLACE type document as object
DOC_ID NUMBER (38),
BATCH_ID NUMBER (38),
STATE NUMBER (2),
TRANSIENT NUMBER (2),
ASP VARCHAR2 (20),
USER_ID NUMBER (6),
MACHINE VARCHAR2 (30),
MEMBER PROCEDURE setState,
MEMBER function getState RETURN NUMBER
) not final;
create table test of document;Hi Adam
You need to instantiate your object type in your insert statement(while doing through PL/SQL block), so try like this
Insert into test values(document(1,2,'CO',55,'xyz','kkk','PENTIUM'));
The reason you were successful through SQLPLUS was that, SQLPLUS automatically instantiate the values into object type.
Qurashi -
Hi all ,
I have tried unix command from PLSQL Block,
Please see the code.
DECLARE
stat INTEGER;
host_command varchar2(100);
errormsg VARCHAR2(80);
command varchar2(2000);
BEGIN
command:='touch /home/oracle/testting.txt';
dbms_pipe.reset_buffer;
host_command:= dbms_pipe.unique_session_name;
dbms_output.put_line('host_command:'||host_command);
dbms_pipe.pack_message(command);
dbms_output.put_line('pack message:'||command);
stat := dbms_pipe.send_message(host_command);
dbms_output.put_line('stat:'||stat);
IF stat <> 0 THEN
raise_application_error(-20000, 'Error:'||TO_CHAR(stat)||' sending on pipe');
END IF;
stat := dbms_pipe.receive_message(host_command);
dbms_output.put_line('stat2:'||stat);
IF stat <> 0 THEN
raise_application_error(-20000, 'Error:'||TO_CHAR(stat)||' receiving on pipe');
END IF;
dbms_pipe.unpack_message(errormsg);
dbms_output.put_line('errormsg:'||errormsg);
IF errormsg <> 'SUCCESS' THEN
raise_application_error(-20000, 'Execution error: '||errormsg);
END IF;
END;
Nothing happend from this code just getting only following result with error.
-----------------result-----------------------------
host_command:ORA$PIPE$002D19820001
pack message:touch /home/oracle/testting.txt
stat:0
stat2:0
errormsg:touch /home/oracle/testting.txt
DECLARE
ERROR at line 1:
ORA-20000: Execution error: touch /home/oracle/testting.txt
ORA-06512: at line 33
Can any one tell me what i doing wrong in this code.
I m working on Oracle 11g and AIX unix server.This is the forum for the SQL Developer product, not for general PL/SQL questions. There is a link to the SQL and PL/SQL forum in the announcement at the top of this forum.
-
Hello All,
I have a sql query which i am trying to put it in plsql block.It throws me an error saying i cannot have group function as my two select strings gives me more than one row. How to tackle this??
declare
uuid varchar;
stat_date date;
begin
select 'I'||Lower(docfamily_uuid) into uuid, max(status_date) into stat_date from document_status where status_code=303 or status_code=305 group by docfamily_uuid;
end;
ThanksIn addition to being mal-formed it is likely your problem stems from the fact that your query is returning more than one row. Now perhaps you are expecting only one row and your GROUP BY might be getting in the way. Try changing your GROUP BY to include the LOWER function that is in your SELECT statement. But realize that this in itself will not guarentee one row returning from the SELECT statement.
WITH document_status AS
SELECT 'xxx' docfamily_uuid, sysdate status_date, 303 status_code from dual
UNION ALL
SELECT 'XXX' docfamily_uuid, sysdate status_date, 303 status_code from dual
SELECT 'I'||Lower(docfamily_uuid), max(status_date)
FROM document_status
WHERE status_code=303 or status_code=305
GROUP BY docfamily_uuid;
Ixxx 05-FEB-09
Ixxx 05-FEB-09
WITH document_status AS
SELECT 'xxx' docfamily_uuid, sysdate status_date, 303 status_code from dual
UNION ALL
SELECT 'XXX' docfamily_uuid, sysdate status_date, 303 status_code from dual
SELECT 'I'||Lower(docfamily_uuid), max(status_date)
FROM document_status
WHERE status_code=303 or status_code=305
GROUP BY LOWER(docfamily_uuid);
Ixxx 05-FEB-09Greg -
G/L Account blocked Error while posting goods delivery in VL02n transaction
Our Requirement is to change the G/L account which is proposed by OBYC(automatic account determination ) as per the movement typ and order reason from a Ztable. We need a place to code this logic before this OBYC check happens due to which we getting the account blocked error.
Please suggest some user exit or enhancemnet point where we can place this logic.hi Ramki.,
I had configured a Surcharge on delivery in the condition type to be calculated on the qty delivered. Say for every Gallon, a surcharge of 0.2 cents is charged. I had maintained ths surcharge as a separate condition type and assigned it to a separate G/L a/c.
Now during PO creation, in the header , the price remains the same as i give for the Unit price.
IN the conditions tab in Item level, the surcharge is added on to the gross price and i get a Net Price.
Without saving the PO, when i go to see the Print-preview, i see only the Gross price.
After saving the PO, in print review, i see
1. Unit gross price under Sl.No.1
2. After the Item description, immediately, there is qty ordered x unit price + surcharge and them following Nett price
3. At the bottom right corner of the PO, i get qty ordered x unit price only . Surcharge amount does not appear.
How do i get the Total Nett price i.e qty ordered x unit price + surcharge to appear on the bottom right of the PO.
Is it a standard functionality for the Total price to appear or does it involve the role of ABAP programming.???
Do clarify my doubts
Tx
MahesH -
Everytime I try to load the Netflix app, I get as far as the red screen and it stops loading. The iPad doesn't freeze, it just stops. Then when I try to go to their website, I get a blocked error message. Does anyone know how to fix this?
Some possibilities:
You are on a network that blocks streaming content or otherwise won't let you access it
You have restrictions set to block some content (Settings App, General, Resrrictions). -
Interpration of DBVerify zero block errors
Hello Oracle-experts,
after DBVerify check on my Oracle DB 10.2.0.2 i get the several following errors:
Completely zero block found during dbv:
Page 286685 is marked corrupt
After these warnings I get the error:
BR0398E DBVERIFY detected corrupted blocks in /oracle/<sid>/sapdata4/sr3_8/sr3.data8
Question:
1) How should these zero block errors be interpreted? Is my database therefore corrupt or can these errors be neglected? If not, what is the approach to solve these errors?
The problem is that I have a lot of these errors and do not have a valid backup.
Any helpful information information will be very appreciated!Hi Holger,
didn't you like the replies of your other threads?
Block Corruption (BR0398E DBVERIFY detected corrupted blocks in /oracle/TS2
BR0398E DBVERIFY detected corrupted blocks in TS SAPSR3
Honestly, handling corruptions is really not that difficult.
You figure out what kind of data is supposed to be stored in the corrupted blocks and take your actions accordingly.
So if you can regenerate the content (like you can do that by rebuilding indexes), you do that.
If you cannot regenerate the content, you need a backup.
That's it. It's all lengthly described in the SAP notes on corruptions. Maybe you should read them ...
> Question:
> 1) How should these zero block errors be interpreted? Is my database therefore corrupt or can these errors be neglected? If not, what is the approach to solve these errors?
> The problem is that I have a lot of these errors and do not have a valid backup.
Ok, having no backups always puts you in dire straits. It's the single one error no DBA is allowed to make.
However, what you should do is to perform a FULL consistency check.
That is:
run ANALYZE TABLE VALIDATE STRUCTURE CASCADE on ALL tables
run a FULL db export to /dev/nul
run DBVerify/RMAN validate on the complete database (looks like you've already done that)
Don't skip a check, don't shortcut - just do them.
Maybe the "completely zero filled blocks* don't belong to any object and you've no data loss.
Then you may (as I already told you in the other thread) reorganize the tablespace to get rid of the warnings.
If there was some data in these blocks that you cannot regenerate then you have to face it: you lost that data.
It's gone and won't come back.
regards,
Lars -
Hi
Needs some help, urgently.
i have to call/execute a plsql block in java program.
block is similar to this
declare
CURSOR l_csr IS
select empname, empid, empdate from emp
order by empid;
l_empid NUMBER;
l_empdate DATE;
l_empname varchar2(30);
o_dateProfileId NUMBER;
o_dayofweekprofileid NUMBER;
begin
open l_csr;
loop
FETCH l_csr INTO l_empid , l_empname , l_empdate;
EXIT WHEN l_csr%NOTFOUND;
DETERMINEEMPPROFILE(l_empdate,o_dateProfileId,o_dayofweekprofileid,l_empid ,FALSE);
IF(o_dateProfileId IS NOT NULL) THEN
SELECT totaljobs INTO l_max1 FROM dateprofile WHERE dateprofileid = o_dateprofileid;
ELSE
SELECT totaljobs INTO l_max1 FROM dayofweekprofile WHERE dayofweekprofileid = o_dayofweekprofileid;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN DBMS_OUTPUT.PUT_LINE('SQLCODE = ' || SQLCODE);
END;
i need to call this in java program and take the results of l_max1.
can someone provide an example of hot to do this or sample code
appreciate any helpI'm assuming this is for Oracle. Take a look at this article [url=http://www.enterprisedt.com/publications/oracle/result_set.html
]here for an example of how to use java to parse a result set from an Oracle procedure. -
How to invoke plsql block when press a button
new to htmldb,
let's say i have a form with some items , after i press a button, i want to invoke a plsql block, how can i do that?
Cheers,I have only played a bit with this. I had a region with search criterias and a region based on a procedure. I created a page button on the first region that branched to the same page. When I press the button the page is refreshed and the procedure is re-executed with what ever search criterias the user has keyed in. That is as far as I have come :-)
-
Profit Center blocked error in depreciation run
We are upgrading SAP system from 4.6 to 6.0. It was noticed that Profit Center blocked error is being captured in depreciation run test run in the upgraded version. In 4.6, this error is not being captured. Is this an enhancement in the upgraded version?
I have not search information about it. I found this change only positive. Now you have direct to solve the error (wrong profit center) and not later with the retirement. It is only when they block profit centers or assign an other profit center to a cost center that they have to contact asset accounting for changing the asset. In the old version the values on the profit center where wrong, now you have to correct them. I see this more as a bug in the old version that is solved now.
When you don't want this have a look to the error message and turn it of when that is possible, but then you accept that the vallues in profit center accounting are wrong
Maybe you are looking for
-
1.) Just tried reloading the toolbar for profile song. I now have two and not sure how to get rid or uninstall one of them. 2.) Profile Song used to load within my FB page itself when I logged in and now it doesnt show at all there.
-
Service Manager 2012 R2 is not in a valid state.
I currently have Service Manager 2012 SP1 with update roll up 4 installed on our server. I also installed the web portal on the same server. later I installed the web portal on a separate server(I could not remove the web portal as we had already sta
-
Video chat in Lion and Mountain Lion
My iChat wont let me accept videochat invite in Lion and Messages wont let videochat in Mountain Lion. Any suggestions?
-
Java Collections Framework Architectural Flaw
Here is this flaw (or miss) on design level: public interface Set<E> extends Collection<E>My opinion is that Set<E> should extend List<E> because a List, can BE also (or have the semantics of) a Set. (After all a list CAN have distinct elements) I.e.
-
How to create dynamic properties in java
Hi All Let me give a breif intro of what i am tryng to do....... I want to write a jsp page where the data would be coming from JDBC. I have abt 18 columns in my oracle table. Out of which i am only configured 7 fields on my jsp page. I want to creat