Plug-in problem: battery 2
i have correctly installed battery 2 w/the audio component in the correct place but it's still nowhere to be found when i run logic express 7.2
i have updated the version of battery but still no dice... any ideas whats the problem???
any help is greatly appreciated, thanks!
Battery opens with Rosetta, in emulation. However, since Logic is an Intel-native application, it won't open with Rosetta. You can't open a plugin with Rosetta if the main app is runnin' native.
Similar Messages
-
Safari and calendar won't open due to 'calendar persistence plug- in problems'. Does anyone know what this means and how to resolve it please?
mac book pro with Mavericks 10.9.5Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
# Question
I have so much trouble with the plug in part of the program I want to disable this in Mozilla. I have to go to windows explorer to get around this plug in problem with MozillaDepending on the CSS, live view and design view can be totally different.
Its often best to type in your copy in the divs and then add the CSS to format it.
Post the css and the set of divs with some content in order to enable people to try work out what is wrong. -
All of a sudden when I view a file that's been downloaded, or viewed on line, whether in Windows Media, or on You Tube on line site, or Power DVD Play program, the image appears as if it was in a slow motion "strobe" effect, while the audio sounds consistent, (barring the frequent stalls). If I burn a DVD, it has the slow motion strobe effect burnt into the disc as well & is difficult to view on a DVD player. Is this a plug-in problem that has suddenly manifested, and is there a way of getting the system back to it's normal operation??
== This happened ==
Every time Firefox opened
== Since about 2 weeks ago.Hello Joe.
Try disabling all add-ons (that's extensions, plugins and themes, go into ''Tools > Add-ons'') except for Flash and see if the problem persists. If they don't, enable one add-on at a time until you find the problem. If they do, try a new [http://support.mozilla.com/en-US/kb/Managing+profiles Firefox profile] and see if it has the same issues. If it does (make sure other plugins aren't enabled), you need to contact Adobe for support on their Flash plugin ([https://www.mozilla.com/en-US/plugincheck/ updating] it will be the first thing they tell you to do). If it doesn't, please tell me. -
what to do if upon charging after a few minutes it shows the plug symbol on battery but the green battery icon on the main screen is still half?
One of two things usually. Less often charger is faulty, try another charger. Most often the plug symbol in this situation indicates faulty battery.
Try a Reset, hold both home and power buttons until the iPhone restarts itself, ignore the "slide to power off" let iPhone restart itself. -
Problem battery iPhone 4 after ios 6.1.2
Problem battery descharge after actualitation ios 6.1.2
I too have the same problem. I updated a 4S 16GB to 6.1.0>6.1.1>6.1.2 and the phone is often saying no service. iPhone 5 on same network with same update works.
We connected the 4s to iTunes and clicked restore so iTunes would download full 6.1.2 update and install to the handset and its much much better but it's not completely fixed the issue.
It's 100% only happened since 6.1.2 update
We went to Genius Bar and its 3 months since Warrenty expired so they wanted £139 GBP to replace handset as they could see 6.1.2 had broken handset. I didn't feel we should pay for apples mistake and left the store. -
I need the mother board plug for the battery charger and Bios Battery for an XT178 Laptop?
HP xt178 Laptop (1P) F4685H SN: TW24604214
I need to replace the motherboard plug that the Battery Charger plugs into as it is broken.
The Bios Battery has failed and is NO: ML1220 with a number 28 in ink stamped on it.
are these parts available from HP or can you provide me with common part numbers.
JackHey JD,
That's a reaalllllllllyyy old laptop. As an HP employee I feel obligated to recommend picking up a new one at your local retailer.
If you are serious about finding parts then you may be out of luck. HP stopped servicing that notebook in 2006.
http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=F4685H
-wes
I am an HP employee. -
I did the update and even did a factory reset, and I am having
problems typing when plugged in to the wall charger, I get random keystrokes,
from all over the keyboard, not just the keys around the one i want to press.
Dolphin browser is running supper slow, especially when on Facebook. The
battery life has lost at least an hour.Phones will do that when plugged in, esp with cheap chargers.. it has to do with the voltage and coveting and the digitized screen. You can google if you want more indepth there
clear data out of dolphin,check for update? also read comments on the app maybe it sucks on ics
battery stats got erased when you did a factory reset, give it a few charge cycles -
I am halfway thorugh a thesis and am so ready to chuck this computer out the window. It is a HP Pavilion Entertainment PC Notebook, dv6000 if all that helps. I have had this notebook for nearly three years, and I have only recently encountered a problem with it when it charges. I have all cords plugged in correctly, the adapter is in the wall (and I know the socket works), and the computer does not always charge. If i toggle with the plug in the side of the computer, it does work, and then if it shifts, it might not. the light may or may not come on, and the icon may or may not change to show charge status, depending on the position of the plug in the side of the notebook.
Please help me figure this out. My father thinks it may have something to do with the connections of the pins inside the actual computer. From the performance and the finnicky nature of my computer's charge, I want to agree. If the plug does not charge (sometimes i put a stapler to hold it in place, that seems to work sometimes), the computer runs out of battery within 40 minutes.
Any ideas on how to fix this charge issue? Anyone out there experiencing the same thing and has had success with the repair?
Thanks in advance for your input!If you already have checked the problem is not the battery ( usually when the battery is new or when the battery is charged on another notebook), or the AC to DC converter, then you must check this first:
1) Remove your battery,
2) Unplug your power cord from the notebook,
3) Push the power button for 15 seconds (if necessary you can hold down for 1 minute),
4) Plug the power cord into the notebook,
5) If the power led is on, your power adapter is probably working,
6) Push the power button,
7) If the computer powers on, your power adapter is probably working ( it's more certain than before),
8) Try to use the computer,
9) After Windows finished the entire start up process, you must insert the battery,
10) It's expected that the battery icon shows charging.
If it happens to you, therefore the problem is in the motherboard. The exact point it is in the IC responsible for check and control the status of the battery. Up to know I don't know where is located the fault IC. This fault IC is a Voltage Comparator, usually it is an Operational Amplifier.
If you remove the powerplug the computer will start to drain the battery until the end, but if you reinsert the powerplug the computer WILL NOT detect, and it will continue to drain the battery until the end.
If you remove the battery with the powerplug inserted, the computer will turn off, cause it doesn´t recognize the power source from the cordplug.
Remove the power plug, insert it again without the battery and the computer must be able to turn on.
If you turn on the computer, and after this you insert the battery than the computer will start to charge the battery.
Resume:
A) To charge the battery you must insert the battery after the computer it is on.
B) To use the battery power you must disconnect the power cord, but you won't be able to charge it until you turn off the computer and remove the battery, and to follow the step A.
I verified that the problem happens to all DV6000 ( DV60xx ), DV6100 ( DV61xx ), DV6200 ( DV62xx ), DV6300 ( DV63xx ), DV6400 ( DV64xx )and DV6500 ( DV65xx ) series.
My case is a HP Pavilion DV6104eu, that I bought in UK. -
I am having increasing difficulties making a proper connection to recharge the battery. It seems that the contacts are not working properly.
I thought it was some dirt in the little hole but sometimes I need to move the plug to start the charging process.Both the charger cable and the phone are still under warranty. If you're having difficulites, bring the to Apple for evaluation. If one or the other is defective, it will be replaced free of charge, unless there's obvious user damage.
-
2009 MacBook Pro on Snow Leopard crashes when operating on battery only. Works fine when plugged in. The battery holds a charge as indicated by the battery monitor in the menu bar and the green lights on the side.
Is this a hardware issue/battery issue/software issue??
Thanks!Hi s,
Sounds like battery. Go to Apple menu > About This Mac > More Info > Hardware > Power and see what it says for batt condition and also cycles. -
My MiFi jetpack 6620 doesn't charge. I've plugged it into the charger that comes with it, and only that charger. But nothing happens. The battery keeps getting drained. I first attempted when it was at 16%. After being on the charger a few hours, it dropped to 15%, then 14%. I'm currently at 12%. I've tried different outlets at different locations. And I've tested the charger cable on my phone and it charges that just fine. Which is more likely: the battery is defective or there is a problem with the jetpack itself? and the real kicker is that I've only had it for a week.
Happy Friday cjyoyomasta! I wanted to reach out to you to see if you received the assistance that you need with your jetpack. May I ask have you took the device to the store for assistance? If so, what was the results? If you can provie us with a status update then we can assist, if still needed.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport -
My charger has been plugged in, but battery won't charge.
I had my computer plugged in to charge before I left on a trip. When I arrived, I had no battery charge. I remember that the little light was always red when I thought it was charging. Then I couldn't get my computer to recognize when it was plugged in, I couldn't get the light to light green. It wouldn't charge. The plug in part has always sparked when it hits the source in the wall, and now the mag plug gets very hot. I tried every plug in the hotel, to no avail. Then I spent two days at a private residence, and it charged! Now, I'm back in a hotel and I can't find a plug that says my power source isn't plugged in when I was trying to update my iTunes.
I am also having problems turning it off, and on.
When I think I powered down, and then turn it on, it's been on the whole time. No chimes at start up, just motor running and screen eventually surfaces.
I can't go to an Apple store, and I'm not on Apple Care (a huge mistake). Any suggestions?Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713
Best. -
New problem, battery drain after update to OSX 10.10.3
EtreCheck version: 2.1.8 (121)
Report generated 15 april 2015 22:26:06 CEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, 2.53GHz, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 405
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D131) - Time since boot: 0:11:59
Disk Information: ℹ️
ST9320423ASG disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (221.87 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[not loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.6) [Click for support]
/Library/Extensions
[loaded] com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8) [Click for support]
/System/Library/Extensions
[loaded] com.squirrels.airparrot.framebuffer (5 - SDK 10.8) [Click for support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist [Click for details]
Launch Agents: ℹ️
[running] com.epson.eventmanager.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.synology.SynoSIMBL.plist [Click for support]
[loaded] com.synology.SynoSIMBL_RefreshFinder.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
OfficeLiveBrowserPlugin: Version: 12.3.0 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
WidevineMediaOptimizer: Version: 6.0.0.12607 - SDK 10.7 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 40 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 97.34 GB
Destinations:
Ronald Schmeddes [Network]
Total size: 998.06 GB
Total number of backups: 79
Oldest backup: 2012-06-14 01:03:43 +0000
Last backup: 2015-04-13 14:58:46 +0000
Size of backup disk: Excellent
Backup size 998.06 GB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
99% kextcache
6% WindowServer
1% Activity Monitor
1% imagent
1% sysmond
Top Processes by Memory: ℹ️
215 MB com.apple.WebKit.WebContent
202 MB kextcache
120 MB mds_stores
107 MB ocspd
103 MB Safari
Virtual Memory Information: ℹ️
1.14 GB Free RAM
1.73 GB Active RAM
583 MB Inactive RAM
579 MB Wired RAM
1.13 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Apr 15, 2015, 10:12:01 PM Self test - passed
Apr 14, 2015, 08:35:37 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-04-14-203537_[ redacted].cpu_resource.diag [Click for details]
Apr 13, 2015, 03:53:38 PM /Library/Logs/DiagnosticReports/rapportd_2015-04-13-155338_[redacted].cpu_resou rce.diag [Click for details]
Apr 13, 2015, 01:02:32 PM /Library/Logs/DiagnosticReports/iTunes_2015-04-13-130232_[redacted].hangDouble check that your Network settings are how you want them as after an upgrade they have a habit of changing.
On my Verizon phone it redefaulted to Global which really burned my battery instead of limiting it to LTE/CDMA, once I changed it back battery life was back (or better) than previously. -
Macbook pro 2012 Auto power up when plugged in (Dead battery)
My MBP 2012 automatically power up when plugged in. (I havn't changed any settings regarding the power and I have double checked it and confirmed)
My battery went dead before 3 weeks for no reason and stopped charging at 21%, but still the battery condition is displyed as normal.
Do I have to replace the battery with a new one and will it solve the problems. (Auto power up and charging issue) ???
PS: The warrenty is over and I don't have apple care either.
please check the infomation bellow:-
Battery Information:
Model Information:
Serial Number: W02XXXXXXX
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 165
Charge Information:
Charge Remaining (mAh): 1006
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4718
Health Information:
Cycle Count: 175
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11263
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Nofirst I have tried SMC reset and PRAM reset.
Unfoatunatly now I can't do them bcoz the computer powers up automatically when I plugged in.
PS: I have tried another adopted and still it's the same
Maybe you are looking for
-
Importing txt-files in Labview
Hello, I am a beginner in programming labview applications so its possible my next question is very easy to program but i dont know how My question is about importing a txt-file (csv-format) in labview. This txt-file is updated every 10 minutes and I
-
How do I read a R/3 table from VB6 using RFC?
I am using a DLL created in VB6 to connect to an R/3 system. I then call several ABAP functions I have written and exchange data. This all works nicely. I now have a R/3 function into which I pass a parameter, and it gathers some data into a table
-
Posting from one jsp to another gives HTTP 405 "method not allowed"
I have a servlet filter that authenticates all requests for resources in my web app. This works fine when HTTP GET requests are being used, but I notice I get a HTTP 405 "Method not allowed" when a HTTP POST is issued. Even a simple JSP page that pos
-
Easily identify Exchange Invites?
I have switched over to using Mail in Snow Leopard with my companies Exchange 2007 server from Entourage. Overall I am MUCH happier, but there are a few things I am still trying to work out. One of them is how to easily identify meeting invites. When
-
Strange font rendering in firefox
I have an svg file which has a very strange rendering in firefox the letters seem to be above each other while they're next to each other. kindly check the link I attached, it includes: 1- the svg file 2-How it shows on firefox 3-How it shows on chro