Plug ins, where do they go

for quite some time my downloaded plug ins showed up in LR 4, then one time, they were not there, they reappeard. Now they seem to be gone and not coming back.
any thoughts appreciated  joanlvh

See this webpage where plug-ins have to be installed: http://help.adobe.com/en_US/lightroom/using/WSB8C2DF2B-2ED0-4b97-BA18-5DBEDC69E7D9.html
The webpage talks about Export plug-ins but the location is the same for all plug-ins.

Similar Messages

  • How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

    How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

    Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
    In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
    In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

  • Plug-ins disappearing, but they are still installed!

    Yesterday I went to use some plug-ins that I always use and they where gone. The plug-ins list was cut in half: some where still there, some where not. I rescanned the plugs and some reappeared, but a lot of them are still gone. Curiously I opened a project from a few months back and when I checked the plug-ins from within that project, they where all there.
    Has this happened to anyone before? I hope there is a fix other than re-installing everything again.

    Check whether are are using mono or stereo tracks. Depending on what the plugin declares to the host, some plugins may or may not be available by default depending on whether you are inserting them on mono or stereo tracks.
    Otherwise, I don't understand why plugins would "disappear" on a by-project basis, as the available plugins are a system-wide thing.
    Remember there is a difference between what plugins are "available" to Logic, and what are instantiated in your project...

  • Plug ins where to find them to upgrade them

    Running indesign 5.0 but have installed updates so I am assuming that it is now 5.5.
    I cannot open previous files. Gives error message
    need to update plugins
    where do i find the plug ins and how do i update them
    thanks
    Patti

    No, that would not be 5.5 since that was a paid upgrade.
    The reason you can’t open those files is because they were created in a
    later version of InDesign. Have whoever sent them save them back via IDML.

  • FREE PLUG-INS: Where can I get them?

    I've been looking on the net but haven't had much luck.
    Thanks in advance

    [Directory of Final Cut Pro plugins|http://www.toolfarm.com/plugins/index.php/Main_Page] Many are free, some less so.
    Free plugins written by forum contributors:
    http://pistolerapost.com/pluginz/index.html
    http://web.mac.com/andymees/FreeandEasy/main/main.html
    http://lucasplugins.blogspot.com/2008/11/lucas-plugins.html

  • My Plug-Ins won't load or be verified in the Effect Menu

    I've tried numerous times to install many effects in After Effects, but none of them seem to work. I've put the file in the plug-ins sections, but they will never appear in the program. Is there any sort of fix for this?

    Where did you get the plugins?  All of Red Giant plugins have installers which require serial numbers.  Optical Flares has an installer AND requires online activation. Without running the installers and following the activation process, the plugins won't work properly. 
    If the plugins don't appear in AE at all, as Mylenium says, they are properly not the correct versions for the bersion of AE you have.

  • I updated to PS CC 2014 and now my plug-ins are no longer available to use. how do I get them back?

    i updated from PS CC to PS CC 2014 and now my plug-ins are no longer available to use. how do I get them back?  I can no longer navigate to the NIK collection, my Topaz plug-ins, etc.  They still are accessible on LR, but they don't seem to now be accessible on PS CC 2014

    For Topaz, cop the shortcuts from Program Files\Adobe\Adobe Photshop CC\plug-ins  to the same folder in Photoshop CC 2014
    I don't know about Nik
    BTW  What sort of pictures does a 'Photographic Psycho' take? 

  • I can't get all my Flaming Pear plug-ins to install in Photoshop CS6 on Mountain Lion.  Can anyone help me?  I also get crashes on the ones that did install.  Whats the problem?

    I cannot get all the Flaming Pear plug-ins to work.  I have dragged them into my Photoshop CS6 plug-ins folder but they do not show up under "filters".  Also among the ones that do show up and that do work, I am having crashing problems.  I chatted with Adobe (they do not answer their phone) and they said "You cannot use any plug-ins with Photoshop-uninstall them right away".  When I said, "Then what's the use of Photoshop?" the guy ended my chat session!?!?!?!
    Flaming Pear does not reply.  What is the problem with the plug-ins? 

    Kreplach,
    Open CS6 > Preferences > Plug-ins
    in the preferences menu > select plugins on the left column > and check the box additional plugins folder
    choose > location of a plugins folder (make one or use the mounted volume of the dmg I downloaded from pear site)
    You need to close Photoshop CS6 and reopen it for the plugin to load:
    Enjoy,
    Sidonsoft

  • Plug-ins for LE9

    Hi all.
    I've just bought the following gear for a small home recording setup: MacBook Pro 2.44mhz, LE9, TC Electronic Impact Twin, SE Electronic 2200A Mic, M-audio midi keyboard.
    The music I'm doing is minimalistic folk or something like it.
    Currently i'm using the plug-ins that comes with LE9, but my question is: what would be great plug-ins for my style of music? I'm going to use it mainly for Keys, strings, flutes, drums and bass. I would really like plug-ins that sounds organic, is there something like that out there? And what about free plug-ins, where do I find these?
    I'm going to link to my music so that you guys can get a sense of the style, the music on myspace is recorded in a traditional fashion though.
    www.myspace.com/deerbearband
    All the best
    Lars

    Welcome to the world of Logic !
    I would recommend the M-Tron Pro and VSE both from G force for strings , flutes , etc. http://www.gforcesoftware.com/index.php
    And Maybe some very simple less polished sounding sample libraries for bass and drums which you could load right into the esx-24 sampler in logic ,but I can't recommend any since A: thats not my style so I don't know the names of some I've heard and B: Sample libraries are a very personal choice.
    I would recommend that if it looks flashy it's probably not going to produce than salt of the earth sound your after though .
    As far as free plugs go Don't crack is the place to go
    http://www.dontcrack.com/freeware/software.php/id/7037/audio/Plug-ins/plugins/AU /
    http://www.dontcrack.com/freeware/software.php/id/7030/audio/Virtual-Instruments /plugins/AU/
    Good luck

  • How do i disable the Check your plug ins page at start up?

    at start up my homepage displays on one tab and a new tab that suggests to update plug ins displays from mozilla and shows some plug ins and if they are up to date or not, I wish to disable this page but don't see any options or any link to show how to disable it.

    I think this will solve that problem with the Plugin Check page.
    Type '''about:config''' in the URL bar and hit Enter. <br />
    ''If you see the warning, you can confirm that you want to access that page.''
    Pref = '''plugins.update.notifyUser''' if it shows as True, double-click that pref to toggle it to '''False'''
    ''That pref was new to the Firefox 3.6 version and is present in later versions.''

  • Safari 4 Plug-Ins

    I'm not sure how to manage Internet Plug-Ins for Safari. But I do use the "Help" "View Plug-Ins" sometimes. Since I downloaded Safari 4, I've notice what appears to be duplicate files for the same plug-ins (Its possible they were there in Safari 3 and I just missed them, but I don't believe that is the case). Not all Plug-Ins have duplicates. For me, these do:
    QuickTime Plug-In 7.6.2
    From file "QuickTime Plugin.webplugin" AND
    From file "QuickTime Plugin.plugin"
    Java Plug-in (CFM)
    Java 1.3.1 Plug-in (CFM) — from file “Java Applet Plugin Enabler AND
    Java 1.3.1 Plug-in — from file “Java Applet.plugin”
    Flip4Mac Windows Media Plugin 2.2.1
    from file “Flip4Mac WMV Plugin.plugin” AND
    from file "Flip4Mac WMV Plugin.webplugin”
    Is this Correct/Normal? Or does this need to be cleaned up and if so, how?

    That's correct.
    .webplugin files are for WebKit browsers (such as Safari)
    .plugin are 'classic' Netscape compatible plugins (which Safari can also use, but only if there is no .webplugin version available).

  • Will 32 bits plug-ins for AE CS5 and  64 bits plug-ins for AE CS4 work ?

    Hi
    I have a couple of queries  on plug-ins. Basically they are the same query
    a)      Will 32 bits plug –ins like Magic Bullet, Twixtor, Trapcodes, Boris etc work proplerly with  64 bits Adobe AE CS5 ?
    b)      Inversely, will 64 bits versions of plug –ins like Magic Bullet, Twixtor, Trapcodes, Boris etc work proplerly with  32 bits Adobe AE CS4 ?
    Both the above on 64 bits computers.
    Thanks

    No and no.
    from "Plug-ins":
    "Important: Because After Effects CS5 is a 64-bit application, only 64-bit plug-ins can run in After Effects CS5. Plug-ins created for previous, 32-bit versions of After Effects will not run in After Effects CS5. To inquire about availability of 64-bit versions of plug-ins, contact the plug-in vendor or provider."

  • How do I install NIK plug-ins into Lightroom?

    I'm trying to install NIK plug ins into Lightroom 5. How do I do that?

    I just ran the Nik installer. After the plug-ins were installed they were accessible from the "Edit in" menu in Lightroom.

  • 3rd Party Plug-Ins Not Listed Under Inserts

    I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
    Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
    Please help.

    Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
    Cabarete
    Software response:
    validating Audio Unit Stylus RMX by Spectrasonics:
    AU Validation Tool
    Version: 1.2.1b3
    Copyright 2003-2007, Apple, Inc. All Rights Reserved.
    Specify -h (-help) for command options
    VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
    Manufacturer String: Spectrasonics
    AudioUnit name: Stylus RMX
    Component Info: Stylus Audio Unit.
    Component Version: 1.6.1 (0x10601)
    Component's Bundle Version: 1.6.1
    * * PASS
    TESTING OPEN TIMES:
    COLD:
    Time to open AudioUnit: 44.468 ms
    WARM:
    Time to open AudioUnit: 0.124 ms
    FIRST TIME:
    Time for initialization: 0.009 ms
    * * PASS
    VERIFYING DEFAULT SCOPE FORMATS:
    Input Scope Bus Configuration:
    Default Bus Count:0
    Output Scope Bus Configuration:
    Default Bus Count:8
    Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    * * PASS
    VERIFYING REQUIRED PROPERTIES:
    VERIFYING PROPERTY: Sample Rate
    PASS
    VERIFYING PROPERTY: Stream Format
    PASS
    VERIFYING PROPERTY: Maximum Frames Per Slice
    PASS
    VERIFYING PROPERTY: Last Render Error
    PASS
    VERIFYING PROPERTY: Instrument Count
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    * * PASS
    VERIFYING RECOMMENDED PROPERTIES:
    VERIFYING PROPERTY: Latency
    PASS
    * * PASS
    VERIFYING OPTIONAL PROPERTIES:
    VERIFYING PROPERTY Supported Number of Channels
    PASS
    VERIFYING PROPERTY Tail Time
    PASS
    VERIFYING PROPERTY Bypass Effect
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    VERIFYING PROPERTY Render Quality
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    VERIFYING PROPERTY Host Callbacks
    PASS
    * * PASS
    VERIFYING SPECIAL PROPERTIES:
    VERIFYING CUSTOM UI
    Carbon View Components Available: 1
    auvw StyM VST - Spectrasonics View
    PASS
    Cocoa Views Available: 0
    DEFAULT PRESET: 0, Name: unused
    auvaltool(714) malloc: * error for object 0x13d3f850: double free
    * set a breakpoint in mallocerrorbreak to debug
    HAS FACTORY PRESETS
    VERIFYING CLASS INFO
    WARNING: Preset name is not retained in retrieved class data
    PASS
    TESTING HOST CALLBACKS
    PASS
    * * PASS
    PUBLISHED PARAMETER INFO:
    # # # 74 Global Scope Parameters:
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    * * PASS
    FORMAT TESTS:
    Reported Channel Capabilities (explicit):
    [0, 2]
    No Input, Output Chans:
    0-1 0-2 0-4 0-5 0-6 0-7 0-8
    X
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
    * * PASS
    RENDER TESTS:
    Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Render Test at 512 frames
    Slicing Render Test at 64 frames
    PASS
    Render Test at 64 frames, sample rate: 22050 Hz
    Render Test at 137 frames, sample rate: 96000 Hz
    Render Test at 4096 frames, sample rate: 44100 Hz
    Render Test at 4096 frames, sample rate: 192000 Hz
    Render Test at 4096 frames, sample rate: 11025 Hz
    Render Test at 512 frames, sample rate: 48000 Hz
    PASS
    Checking parameter setting
    Using AudioUnitSetParameter
    Using AudioUnitScheduleParameter
    PASS
    * * PASS
    AU VALIDATION SUCCEEDED.
    validation result: successfully validated
    updating properties of AU Stylus RMX by Spectrasonics...done.

  • Installing plug ins on Logic pro.

    I would like to know if there is a specific folder to install AU plug ins of brands other than Apple.I had no issues when I installed Native Instruments that installed itself on the default location.A few other plugins do not seem to show up in Logic.SO I was wondering if there was a specific folder I need to install these plug ins? If so please specify which folder.

    Hi
    Audio Unit plugins should be installed in (either)
    (Startup disc) Library:Audio:Plug-Ins:Components
    or they can be in
    <User> Library:Audio:Plug-Ins:Components
    Note that you have to start Logic in 32bit mode for the Audio Unit Manager to successfully validate new plugs.
    CCT

Maybe you are looking for

  • New item instance not firing

    Hi all We are seeing a strange problem in forms 10g R2. the when-new-item-instance trigger is firing only for the first time ou click on the item. subsequent clicks on the item from an another item does not fire this trigger. This trigger was firing

  • How to use the internal table of the submitted program

    Hi, In the main program i have submitted a program and that program is running  successfully and data is populated in to it_final, now i want to use this data populated internal table it_final in my main program. Thanks, Sudhakar.

  • Can I install 32gigs of ram on the Mac book pro with retina display

    Can I install 32gigs of ram on the Mac book pro with retina display

  • How can I scale a wallpaper in ios7?

    I can't scale a Photo to use it as a wallpaper in iPad 3G, Can anyone help me?

  • Won't start a new sequence

    I tried to start a new project and bring up a new sequence but it does not show up on the timeline no matter how many times I try it.  So I tried to open a previous project to do it quickly and it gives me the message "The project contained a sequenc