Plugin execution not covered by lifecycle configuration

Hello.
I'm trying to follow the steps in [1], "How-To Build AEM Projects using Apache Maven".
Now, I'm following the step "Compiling JSPs as part of the Maven Compile Phase", in "HOW-TO WORK WITH JSPS" section.
When I paste the "maven-jspc-plugin" and "remove-compiled-jsps" plugins sections to "myproject/content/pom.xml" (see [2]), I found these errors in Maven Console (I'm working with Eclipse):
Plugin execution not covered by lifecycle configuration: org.apache.maven.plugins:maven-clean-plugin:2.4.1:clean (execution: remove-compiled-jsps, phase: process-classes)
Plugin execution not covered by lifecycle configuration: org.apache.sling:maven-jspc-plugin:2.0.6:jspc (execution: compile-jsp, phase: compile)
Somebody with the same issue? Any advise to solve it?
Thank you very much.
[1] http://dev.day.com/docs/en/cq/aem-how-tos/development/how-to-build-aem-projects-using-apac he-maven.html
[2]

Thanks Ben!
I've seen that the instructions in your link are the same as apply one of the quick fixes that Eclipse offers by default. That is, to ignore the plugin execution.
Now, I don't have any errors in my project. Thank you very much!

Similar Messages

BPM DC: Build Plugin IS NOT DEFINED, broken DC, dependencies

Hi,
I'am trying to create BPM component in NWDS 7.2 SP04 and there are some problems.
I've created SC like described in SAP Note 1463541. It said that I need to define required SCs for BPM dc: COMP_BUILDT, BPEM-BUILDT, BPEM-CONTENT, CU-BASE-JAVA, CU-BASE-WD, DATA-MAPPING, ECM-CORE, ENGFACADE, ESCONF_BUILDT, FP-INFRA, FRAMEWORK, MOIN_BUILDT, SAP_BUILDT, SERVICE-COMP, THL-CORE, WD-RUNTIME.
Next I've created track, imported required archives, imported this track in NWDS, and finaly I've created DC of type "Process Composer".
After that I see next problems with my DC:
1. DC cannot be built without another two required DC (ESMP_BUILDT, BPEM-MM).
Is it an error in sap note or something esle?
2. In CBS I can see that some of used DC are bbroken (total DC 430; broken DC 20).
Is it normal or not?
3. I can build my DC in NWDS but when I try to activate it in NWDI I got an error in activation request:
''company.ru/bpm1'' variant ''default'' cannot be built. ACTIVATION will fail.
Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
I think that this is because of broken status of "tc/bpem/bi/bp/buildtool" DC, which is declared as build plugin for my DC.
How to resolve this issue?

Hi IIya,
You are absolutely right. The problem is due to the broken DC in CBS.
Please perform the following steps to resolve the issue.
1) Goto the Landscape Configurator link.
2) Chose your track inside the table on the left side.
3) goto the Domain Data option, Click on the "Change" button, and then click on "Update CMS" button (This may take some time)
4) once the CMS Update is finished, open the "Track Data" link that is beside "Domain Data"
5) Now click on the "Change" button, from the software component (SCs) table remove the WebDynpro SC, and add it back once again.
6) Save the Track Data.
7) Now goto Transport Studio, make sure your track is selected in the table
8) In the Check-In Tab select all the components displayed in the "Check-In" button.
9) Once the Check-In operation is completed all those component will now be queued up in the Development Tab,
10) In the Development Tab select all the components & click on "Import"
11) Once the Import operation is completed all those component will now be queued up in the Consolidation Tab,
12) In the Consolidation Tab select all the components & click on "Import"
13) Now come back to your NWDS and remove the configuration that you have imported previously and then again load the same configuration once again from the SLD.
This should resolve your problem...
If the issue still persists even after performing the above steps, then I am afraid to say that the .SCA files present in ...CMS/Inbox folder might have got corrupted.
Please ask your basis team to copy all the standard .SCA files from the path /usr/sap/<SID>/SYS/EPS/buildarchives/ to the CMS transport directory (<specified in the domain tab>\CMS\inbox) in order to make these dependencies available for your tracks.
Then again perform the above mentioned 13 steps.
Let me know about your findings.
Regards,
Shreyas Pandya

Plugin does not have a valid identifier

Hey guys,
when i´m starting my eclipse plugin in eclipse, it works fine. but when i´m exporting it, and want to start it, there rise up some errors:
!ENTRY org.eclipse.update.configurator 4 0 2009-04-21 12:10:52.325
!MESSAGE Plugin does not have a valid identifier: plugins/com.ibm.de.hermes_1.0.0.jar
!ENTRY org.eclipse.update.configurator 4 0 2009-04-21 12:10:52.326
!MESSAGE Plugin does not have a valid version: plugins/com.ibm.de.hermes_1.0.0.jar
!ENTRY org.eclipse.osgi 4 0 2009-04-21 12:10:52.801
!MESSAGE Application error
!STACK 1
java.lang.RuntimeException: Application "com.ibm.de.hermes.application" could not be found in the registry. The applications available are: org.eclipse.equinox.app.error
[...]Has anybody an idea how to solve this problem? The identifier is correct in the plugin.xml and the *.product. also the identifier to the com.ibm.de.hermes.application is correct.
I really don´t know how to fix it.... :(
thank´s for your help!!!
regards, iTob
Edited by: -iTob- on Apr 21, 2009 4:20 AM
Edited by: -iTob- on Apr 21, 2009 6:11 AM

Sorry no expert again but sounds like something isnt right in your
plugin.xml. Have you compared it with the old one.

I have two computers that give this message when trying to view Dishnet "Camelot" on computer: "Widevine media transformer plugin could not be installed - it is not compatible with firefox 4.0.1." I am told that it is, how do we resolve this? Thanks

The plugin says that Firefox does not allow it.

You can turn off compatibility checking, but more and more of the Google Toolbar will not work. Google is no longer supporting the Google Toolbar so you should use the alternatives.
Hi Mark,
See http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
If you have an aspect that is not covered, indicate what that is; otherwise, expect you to be fully functional within 1-2 weeks.
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

Why google toolbar and bitcomet plugin is not supporting in new versions?

bitcomet plugin was supported in firefox 4,5 version but not supporting in new versions after that, similarily google toolbar also...

Google is not supporting the Google Toolbar after Firefox 4.0 which is effectively saying they are not supporting it at all since it did not work properly before and Firefox 4 itself is not supported by Mozilla.
Bit comment was probably prevented for your safety.
'''The Google Toolbar is no longer supported by Google in Firefox 5 and up''', you may be able to get what you want from it for a limited time, the directions to install the Google Toolbar were posted before Google actually announced dropping support.
*Enable Google Toolbar in Firefox 5 http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
*the-edmeister posted a brief evaluation of the situation https://support.mozilla.com/en-US/questions/841736
In any case you can find several alternative solutions, and you can start working on them now, see
* "'''Using Google Toolbar features without toolbars'''" http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
If this solves your problem then mark as solved, if there is an aspect that is not covered directly or through searching extensions on that page, or other searching that you can try, please indicate what is not covered and describe what it does and we will try to help you with a Firefox solution. Don't expect to see anything that is an exact replacement of a Google Toolbar feature. Likewise if you have additional solutions not covered others would likely want to hear about them.
Summary: held hostage to the Google Toolbar add-on by Google
:https://support.mozilla.com/en-US/questions/860628#answer-229290

Eclipse Plugin is not work

Weblogic plugin is not work, help me!!
platform : Windows XP Home Edition
Eclipse Version : 2.1
J2SDK : 1.3.1_06
Weblogic plugin 1.0.0c
Weblogic version : 6.1sp3
Weblogic install folder : C:\Server\bea
Eclipse Plugin setting
Weblogic
Version : 6.1
Bea Home : C:\Server\bea
Domain Name ; mydomain
Domain Directory : C:\Server\bea\wlserver6.1\config\mydomain
Serve Name : localhost
User : System
Password : passwd
Hostname : localhost
Port : null
Classpath
Classpath before the Weblogic libraries
C:\Server\bea
Classpath after the Weblogic libraries
Null
JavaVM Options
JVM Options
-hotspot
-Xms32m
-Xmx200m
-Dweblogic.ProductionModeEnabled=
JNI Library path
Null
When Weblogic start in Eclipse, Error Message Occured.
----- Error Message --------
<2003-06-10 ¿ÀÈÄ 01½Ã33ºÐ44ÃÊ> <Info> <Security> <Getting boot password from
user.>
Enter password to boot WebLogic server:Starting WebLogic Server ....
<2003-06-10 ¿ÀÈÄ 01½Ã33ºÐ47ÃÊ> <Notice> <Management> <Loading configuration
file .\config\mydomain\config.xml ...>
<2003-06-10 ¿ÀÈÄ 01½Ã33ºÐ50ÃÊ> <Emergency> <Security> <Authentication failure -
reenter password to boot weblogic server:>
<2003-06-10 ¿ÀÈÄ 01½Ã34ºÐ54ÃÊ> <Emergency> <Security> <Authentication failure -
reenter password to boot weblogic server:>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
 at weblogic.security.SecurityService.initializeSuid(SecurityService.java:409)
 at weblogic.security.SecurityService.initialize(SecurityService.java:119)
<2003-06-10 ¿ÀÈÄ 01½Ã34ºÐ55ÃÊ> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
 at weblogic.security.SecurityService.initializeSuid(SecurityService.java:409)
 at weblogic.security.SecurityService.initialize(SecurityService.java:119)
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:400)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
 at weblogic.Server.main(Server.java:35)
'>
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:400)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
 at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception

Originally posted by: eclipse.rizzoweb.com
Tom Roche wrote:
> How to set a file exclusion pattern? What I mean:
>
> I work on a project that is not natively an Eclipse plugin. In order
> to make it acceptable to PDE, I run target=eclipse in the project's
> build.xml: among other things this copies special files (e.g.
> plugin.xml, build.properties) from the project's eclipse folder to the
> project's root.
>
> After running the target, I can Update Classpath, and I'm *almost*
> ready to build the project with Eclipse (C-b or rclick>Build Project).
> First I need to exclude some files. The way I do this in the UI is
>
> 0 select the project's Properties>Java Build Path>Source
>
> For each of 3 source folders (e.g. /src/foo, /src/bar, /test):
>
> 1 expand the folder node, choose the Excluded subnode, and hit Edit
>
> 2 in the Exclusion Patterns section of the resulting dialog, hit Add,
> and enter the exclusion pattern
>
> **/Baz*
>
> 3 hit OK in that dialog and its parent
>
> But this is tedious/error-prone for me and our users. I'm hoping there
> is a way that I can set the appropriate value in build.properties (or
> elsewhere) that will allow me to avoid this manual labor. Is there?
>
> Feel free to forward, and to reply directly to me (as well as the
> group), and TIA.
You can manipulate the .classpath file, if you're careful.
Do it manually (via the UI) and then go look at the .classpath file.
You'll see an entry like this:
<classpathentry excluding="**/Baz*" output="classes" kind="src" path="src"/>
See the excluding= attribute? That's what you want to create when you're
"building" for PDE.
HTH,
Eric

Build Plugin IS NOT DEFINED for this component or the defined Build Plugin

Hello,
we have upgraded our NWDI (nw04s) to SP13 and to DB2 V.9. We don't know if this has something to do with our problem. The NWDS developers called us. They can't activate the changes anymore. When I check the CBS I can see, that all components are broken. Any idea?
REgards,
Alexander
Build number assigned: 487
Change request state from QUEUED to PROCESSING
REQUEST PROCESSING started at 2007-10-10 10:46:13.526 GMT
    BUILD request in Build Space "NW1_GPMS_D" at Node ID: 27,972,750
     [id: 473; parentID: 0; type: 2]
    Waiting for access: 33 ms
    ===== Pre-Processing ===== started at 2007-10-10 10:46:13.559 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 10:46:13.702 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'
                'zurich.com/gpms/yea' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwd' variant 'default'
                'zurich.com/gpms/chgpwd' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/rep' variant 'default'
                'zurich.com/gpms/rep' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/model' variant 'default'
                'zurich.com/gpms/model' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/idp' variant 'default'
                'zurich.com/gpms/idp' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovt' variant 'default'
                'zurich.com/gpms/ovt' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/arch' variant 'default'
                'zurich.com/gpms/arch' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/myr' variant 'default'
                'zurich.com/gpms/myr' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/div' variant 'default'
                'zurich.com/gpms/div' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ume' variant 'default'
                'zurich.com/gpms/ume' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/com' variant 'default'
                'zurich.com/gpms/com' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovw' variant 'default'
                'zurich.com/gpms/ovw' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/obj' variant 'default'
                'zurich.com/gpms/obj' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwdb' variant 'default'
                'zurich.com/gpms/chgpwdb' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/pdata' variant 'default'
                'zurich.com/gpms/pdata' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
        Analyze request DC BV... finished at 2007-10-10 10:46:14.049 GMT and took 347 ms
        Prepare build environment in the file system... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
            Synchronize used libraries... started at 2007-10-10 10:46:14.068 GMT
            Synchronize used libraries... finished at 2007-10-10 10:46:14.068 GMT and took 0 ms
        Prepare build environment in the file system... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
    ===== Pre-Processing ===== finished at 2007-10-10 10:46:14.069 GMT and took 510 ms
    Waiting for access: 3 ms
    ===== Processing ===== started at 2007-10-10 10:46:14.072 GMT
        No Components to be built.
        BUILD DCs
    ===== Processing ===== finished at 2007-10-10 10:46:17.407 GMT and took 3 s 335 ms
    ===== Post-Processing =====
    Waiting for access: 5 ms
    ===== Post-Processing ===== started at 2007-10-10 10:46:17.412 GMT
        STORE build results... started at 2007-10-10 10:46:17.413 GMT
            "zurich.com/gpms/jco_pool" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/jco_pool": store meta-data
            "zurich.com/gpms/jco_pool" in "default" variant is PROCESSED
            "zurich.com/gpms/yea" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/yea": store meta-data
            "zurich.com/gpms/yea" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwd" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwd": store meta-data
            "zurich.com/gpms/chgpwd" in "default" variant is PROCESSED
            "zurich.com/gpms/rep" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/rep": store meta-data
            "zurich.com/gpms/rep" in "default" variant is PROCESSED
            "zurich.com/gpms/model" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/model": store meta-data
            "zurich.com/gpms/model" in "default" variant is PROCESSED
            "zurich.com/gpms/idp" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/idp": store meta-data
            "zurich.com/gpms/idp" in "default" variant is PROCESSED
            "zurich.com/gpms/ovt" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovt": store meta-data
            "zurich.com/gpms/ovt" in "default" variant is PROCESSED
            "zurich.com/gpms/arch" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/arch": store meta-data
            "zurich.com/gpms/arch" in "default" variant is PROCESSED
            "zurich.com/gpms/myr" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/myr": store meta-data
            "zurich.com/gpms/myr" in "default" variant is PROCESSED
            "zurich.com/gpms/div" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/div": store meta-data
            "zurich.com/gpms/div" in "default" variant is PROCESSED
            "zurich.com/gpms/ume" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ume": store meta-data
            "zurich.com/gpms/ume" in "default" variant is PROCESSED
            "zurich.com/gpms/com" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/com": store meta-data
            "zurich.com/gpms/com" in "default" variant is PROCESSED
            "zurich.com/gpms/ovw" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovw": store meta-data
            "zurich.com/gpms/ovw" in "default" variant is PROCESSED
            "zurich.com/gpms/obj" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/obj": store meta-data
            "zurich.com/gpms/obj" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwdb" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwdb": store meta-data
            "zurich.com/gpms/chgpwdb" in "default" variant is PROCESSED
            "zurich.com/gpms/pdata" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/pdata": store meta-data
            "zurich.com/gpms/pdata" in "default" variant is PROCESSED
        STORE build results... finished at 2007-10-10 10:46:17.440 GMT and took 27 ms
        Change request state from PROCESSING to SUCCEEDED
        Analyze effect of applied changes to buildspace state... started at 2007-10-10 10:46:17.440 GMT
            Skip check for build time dependency cycles. DC metadata is not changed.
            Determine components that have become DIRTY due to the results of this request started at 2007-10-10 10:46:18.601 GMT
                No such components have been found.
            Determine components that have become DIRTY due to the results of this request finished at 2007-10-10 10:46:18.602 GMT and took 1 ms
            No Internal Build Requests are canceled by this request
        Analyze effect of applied changes to buildspace state... finished at 2007-10-10 10:46:18.642 GMT and took 1 s 202 ms
        Request SUCCEEDED
    ===== Post-Processing ===== finished at 2007-10-10 10:46:18.646 GMT and took 1 s 234 ms
REQUEST PROCESSING finished at 2007-10-10 10:46:18.646 GMT and took 5 s 120 ms
    ===== Pre-Processing ===== started at 2007-10-10 07:16:55.069 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 07:16:55.104 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'

Here are some things to have a look at:
- Check your SC definitions and their Usage Dependencies in the SLD
- Check that the basis SCA's have been imported into the track. You can quickly see this by having a look at the total nr of DCs for these SCs in CBS.

Update 30 unusable. EVERY page: kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128dea000, protections wer

EVERY page that tries to open causes FF to become Not Responding:
6/11/14 4:50:05 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128dea000, protections were read-write
6/11/14 4:50:13 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128deb000, protections were read-write
6/11/14 4:50:17 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128dec000, protections were read-write
6/11/14 4:50:21 PM kernel Data/Stack execution not permitted: firefox[pid 6174] at virtual address 0x128ded000, protections were read-write
etc. Forever.

Nope. After turning it off, FF became NOT RESPONDING. Restarted, and happened again. Using Safe Mode now.
6/11/14 7:51:10 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x117b86000, protections were read-write
6/11/14 7:51:12 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x117b87000, protections were read-write
6/11/14 7:51:14 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:51382 from 4.2.2.3:53
6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:51585 from 4.2.2.3:53
6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:50260 from 4.2.2.3:53
6/11/14 7:51:17 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:58396 from 4.2.2.3:53
6/11/14 7:51:18 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:64932 from 4.2.2.3:53
6/11/14 7:51:18 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:62508 from 4.2.2.3:53
6/11/14 7:51:30 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaac000, protections were read-write
6/11/14 7:51:30 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:55176 from 4.2.2.3:53
SNIP SOME CHARACTERS FOR 10k LIMIT IN POST
HOW THE HELL CAN I HAVE "EXCEEDED THE NUMBER OF ANSWERS THAT CAN BE POSTED IN A GIVEN AMOUNT OF TIME when every attempt was blocked for being over 10k characters? how the hell are you supposed to EDIT these?
PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:56995 from 4.2.2.3:53
6/11/14 7:51:32 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
6/11/14 7:51:32 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:61082 from 4.2.2.3:53
6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:50233 from 4.2.2.3:53
6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63359 from 173.194.68.191:80
6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63361 from 173.194.68.191:80
6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63355 from 74.125.228.3:80
6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:62761 from 4.2.2.3:53
6/11/14 7:51:33 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63358 from 173.194.68.191:80
6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:62393 from 4.2.2.3:53
6/11/14 7:51:34 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaaf000, protections were read-write
6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63349 from 93.99.92.186:80
6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
6/11/14 7:51:34 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63347 from 93.99.92.186:80
6/11/14 7:51:35 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaaf000, protections were read-write
6/11/14 7:51:35 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63348 from 93.99.92.186:80
6/11/14 7:51:36 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63359 from 173.194.68.191:80
6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63361 from 173.194.68.191:80
6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63355 from 74.125.228.3:80
6/11/14 7:51:37 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63358 from 173.194.68.191:80
6/11/14 7:51:38 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eaaf000, protections were read-write
6/11/14 7:51:38 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
6/11/14 7:51:40 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63349 from 93.99.92.186:80
6/11/14 7:51:40 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63347 from 93.99.92.186:80
6/11/14 7:51:41 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63348 from 93.99.92.186:80
6/11/14 7:51:41 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab0000, protections were read-write
6/11/14 7:51:42 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab0000, protections were read-write
6/11/14 7:51:43 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab1000, protections were read-write
6/11/14 7:51:44 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab1000, protections were read-write
6/11/14 7:51:45 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x12eab1000, protections were read-write
6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63359 from 173.194.68.191:80
6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63361 from 173.194.68.191:80
6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63355 from 74.125.228.3:80
6/11/14 7:51:45 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63358 from 173.194.68.191:80
6/11/14 7:51:46 PM Firewall[61] Stealth Mode connection attempt to TCP 192.168.1.2:63351 from 50.18.44.24:80
6/11/14 7:51:50 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b7000, protections were read-write
6/11/14 7:51:51 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b7000, protections were read-write
6/11/14 7:51:53 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b7000, protections were read-write
6/11/14 7:51:54 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b8000, protections were read-write
6/11/14 7:51:56 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b8000, protections were read-write
6/11/14 7:51:57 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b8000, protections were read-write
6/11/14 7:51:57 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
6/11/14 7:51:59 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b9000, protections were read-write
6/11/14 7:52:00 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b9000, protections were read-write
6/11/14 7:52:01 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9b9000, protections were read-write
6/11/14 7:52:03 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9ba000, protections were read-write
6/11/14 7:52:04 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9ba000, protections were read-write
6/11/14 7:52:07 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9bb000, protections were read-write
6/11/14 7:52:14 PM kernel Data/Stack execution not permitted: firefox[pid 6634] at virtual address 0x11b9bc000, protections were read-write
6/11/14 7:52:18 PM [0x0-0x310310].org.mozilla.firefox[6634] [6644] ###!!! ABORT: Aborting on channel error.: file /builds/slave/rel-m-rel-osx64_bld-0000000000/build/ipc/glue/MessageChannel.cpp, line 1522
6/11/14 7:52:18 PM [0x0-0x310310].org.mozilla.firefox[6634] [6644] ###!!! ABORT: Aborting on channel error.: file /builds/slave/rel-m-rel-osx64_bld-0000000000/build/ipc/glue/MessageChannel.cpp, line 1522
6/11/14 7:52:18 PM com.apple.launchd.peruser.501[112] ([0x0-0x310310].org.mozilla.firefox[6634]) Exited: Terminated
6/11/14 7:52:19 PM Firewall[61] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
6/11/14 7:52:25 PM kernel firefox (map: 0x17d5e0a4) triggered DYLD shared region unnest for map: 0x17d5e0a4, region 0x7fff81000000->0x7fff81200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
6/11/14 7:52:28 PM ReportCrash[6652] Saved crash report for plugin-container[6644] version ??? (1.0) to /Users/hal9000/Library/Logs/DiagnosticReports/plugin-container_2014-06-11-195228_Hal-9000s-MBP.crash
6/11/14 7:52:29 PM Firewall[61] Stealth Mode connection attempt to UDP 192.168.1.2:60331 from 4.2.2.3:53

Sec SAP R3 security plugin is not enabled, SAP BUSINESS OBJECTS INTEGRATION

hi
i am integrating SAP- BUSINESS OBJECTS, WHEN I TRIED TO "ROLE IMPORT" USING sap installation integration kit i got the message "the secSAPR3 security plugin is not enabled.Contact your system administrator for details.(FWB OOOO2).
PLEASE HELP ME
SRIDHAR

Hi Sridhar,
did you deploy the SAP Integration Kit on the BusinessObjects server ?
You should be able to follow these blog entries to get the SAP Authentication going:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Ingo

IDCS3 - Mac: Plugins do not show up on production machines

I have converted a series of plugins on my Mac from CS2 to CS3 and have made their release versions available to our production people. I can see them fine on my box, but when the plugins are installed on Macs other than my own the plugins do not show up inside of InDesign. I have verified that the plugins are installed in the appropriate location on the hard drive. Has anyone else had similar problems and if they did, how did they solve it?
TIA!
John

Hi John,
Sorry about my confusing message. "CFShow(CFSTR("your message"));" is a way to output text from your code to the Console in runtime. You may be able to determine the flow of your code.
pete

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error

I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>

I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

Plugin execution not covered by lifecycle configuration

Similar Messages

Maybe you are looking for