Plz help! how to create a LinkedList inside each element of ArrayList

how do i create a LinkedList inside each element of ArrayList

how do i create a LinkedList inside each element of
ArrayListYou really should read the API documentation and if you would you would see that you can construct a new ArrayList like this:
ArrayList list = new ArrayList();and you can add to it like this
list.add(new LinkedList());and now your list contains a new LinkedList at position 0 wich of course would be a LinkedList with some purpose not just a new empty one like in the example above. You could do something like this:
ArrayList list = new ArrayList();
LinkedList linkedList1=new LinkedList();
// add something to linkedList1
list.add(linked);
LinkedList linkedList2=new LinkedList();
// add something to linkedList2
list.add(linked);
LinkedList linkedList3=new LinkedList();
// add something to linkedList3
list.add(linked);and so one..
bopen, hope this helps

Similar Messages

I deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!

i deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!

You need to restore the folder using the (Put back) selection (CTRL click).

I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?, I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?

I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?, I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?

You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.

How to create a PR for each Maintenance Order

Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDD

Hi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran.

My Iphone4 will turn off, and it is not on, plz help how to switch on or what is the problem

Hi,
My iphone 4 will turn off on its own and It will not turn on, plz help me

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to create a table inside a table in the dictionary

I need to create a table in the dictionary that one of the components has to be a table.
Someone known how to do it.
Thanks.

Hi
U cannot create a table inside another table.
The data storage is not supported in that manner.
If you need multiple fileds based on a single line entry then , first figure out the relationships between these tables.
Then create a second table with a part of the primary key as the first and a unquie primary key to be defined for adding all the rest of the entries in the second table.
Also maintain the foreign key relationships between these tables.
This is the way to have multiple entries for a single line of a table entry.
Regards,
Radhika.

How to create Table Popins inside a table using Java Webdynpro

Hi All,
I am working on a Java Webdynpro project and one of our requirements is to create Table popins inside the Table. I need to popin data beneath the row based on a value selected from the DropDown Box which is one of the column in the Table.
Also, I need to display vertical scrollbar instead of Table Footer to scroll thru the table rows. Any ideas.........
I would appreciate if you can let me know how can I do this. I am working on the 7.0 version of Java Webdynpro.
Thanks for your time and consideration!
Regards,
Madhavi

Hi,
Please refer the following link:
Re: Table popins
step by step procudure to create table popin on lead select.
thanks & regards,
Manoj
Edited by: Manoj Kumar on Apr 1, 2008 10:17 AM

How to create 'Please Wait' inside of CFWINDOW?

Folks,
I'm trying to figure out how to create a 'please wait'
display while the contents of a cfwindow loads. Any suggestions?
Samples highly appreciated.
thanks,
/r

Hello,
According to your question this would be a progress style form. The first link shows an example for copying files (and there are some builtin methods and this is not meant to replace them) while the second link shows how to work with loading a database on
form load.
I did both with specific things in mind but you can go in other directions too.
https://code.msdn.microsoft.com/Copy-files-while-keeping-da349a4f
https://code.msdn.microsoft.com/Practical-Asynchronous-ebd00ae1
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Need Help: how to create url address in dynamic web (PHP)?

Guys,
I need your help! I'm a newbie in web designing, I just want to ask on how to create a web (dynamic page) link/url.
e.g. http://www.mypage.com/?=home
thanks a lot.

Setup a database table and populate the fields (i.e. auto-numerical_primary_key, id, dynamic_mod_url, title, article_content, etc.) then on your page create a filtered recordset where URL parameter (id) = your database table field (primary_key). Place the bindings of the filtered recordset on the page to show dynamic values for the filtered recordset based on the URL parameter. That way when someone visits yoursite.com/page.php?id=1 it will show the content for the database table where the primary key = 1 and so on. use dynamic_mod_url in conjunction with .htaccess dynamic mod rewrite to change yoursite.com/page.php?id=1 into yoursite.com/the_name_of_dynamic_mod_url_for_primary_key_1.html

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Plz help: how to Add a lens profile ? (mac)

hello
i am having problems with the lens profile.
i am working with raw images and when i open in phoshop cs6 (on Mac) and click on lens correction
cant detect what lens i m using (is the canon 16-35 mm) it just gives me option from other canon lens but not this one
when i click search online - doesnt work as well.
i even downloaded the Adobe lens profile downlaoder and find the profile for the lens and downloaded it but still doesnt apper in photoshop lens correcton.
when i open the image in lens correction in the info box under the image gives all the correct info what camera and lenses are used !! but why there isnt any lenses avalable to select when tried to edit the image??
please help how to Add a lens profile from Adobe lens profile downlaoder or how to add in anather way canon lenses.
thank you

can anyone help please?

(Need Help) How to create Numeric text box in SVG

Hello everyone,
Can any one help me to create Numeric TextField in SVG? I'm struggling to do this please someone help me as soon as possible....
Thanks In advance,
Ulaga

To get the best answers, I think you probably need to break down your post into several different one with a separate question in each, along with the business problem you are trying to solve... but here's a few pointers for you to research...
Textbox - there's plenty of info in SDN on creating a custom control with a textbox e.g. Re: Text Editor on modulepool Screen and sample code in SAP too.
Attachments - If this is for an email, then GUI_UPLOAD might help and the BCS class is the newer way to send messages... check out Re: Offline Approval: RBBP_NOTIFICATION_OFFAPP Vs RSWUWFMLEC for example... if this is an attachment for an SAP object such as an FI Document or Purchase Order, then the Generic Object Services (GOS) could be what you want e.g. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
Jonathan

[Help] - How to create BP many times.

Dear all,
Pls help..
i created Business Partners(BP) many times (use FM: COM_BPUS_BUPA_CREATE)
This is the code:
LOOP AT lt_mstcust INTO ls_mstcust.
i FILL data cust that want to be created.
CALL FUNCTION 'COM_BPUS_BUPA_CREATE'
    EXPORTING
      IV_PARTNERCATEGORY         = partner_cat
      IV_BUSINESSPARTNERGROUP    = lv_bpgroup
      IS_CENTRALDATA             = ls_central
      IS_CENTRALDATAORGANIZATION = ls_organ
      IS_ADDRESSDATA             = ls_address
      IV_ACCEPT_ERROR            = 'X'
      IV_BUSINESSPARTNERROLE     = lv_bprole
    IMPORTING
      EV_BUSINESSPARTNER         = lv_bpnumber
    TABLES
      IT_TELEFONDATA             = lt_telephone
      IT_FAXDATA                 = lt_fax
      ET_RETURN                  = lt_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT   = ''
      IMPORTING
        RETURN = lt_return.
ENDLOOP.
end of code.
The strange problems:
Not all BP that i created saved in table BUT000, although all BP number was generated after running that FM.
So i can say after i run the LOOP, i got all bp number. BUT, some of bp numbers were not found in table BUT000. It means when i run TCODE: BP and i entered BP number that were not found in BUT000, error message (bp is not found) would be raised.
Do u have any solutions for it?
Or are there others creating BP FM that can be run in LOOP (can create BP in many times)?
Please help y..
Ur help is very important for me.
Regards.
Daniel N.

Hi Daniel,
You can try out one of the following.
1. Call the function module "COM_BPUS_INPUTDATA_CHECK" before the function module "COM_BPUS_BUPA_CREATE"
2. Instead of calling the function module "COM_BPUS_BUPA_CREATE" Try calling "BAPI_BUPA_CREATE_FROM_DATA" and then commit and then call "COM_BPUS_BUPA_ROLE_ADD"
3. Try removing the flag IV_ACCEPT_ERROR = 'X' from the function module call.
4. In the BAPI_TRANSACTION_COMMIT pass a value 'X' to the parameter WAIT.
Let me know if this helps!
Jash.

[Seeking help] How to create a bean with annotations @ runtime?

I would like 2 create a bean, @ runtime, as below:
public class A {
@MyAnnotation(id = "ID")
private String id = "";
public String getId() { ... }
public void setId(String id) { ... }
}Can anyone tell me how 2 achieve this? I know how 2 create a bean dynamically, however with annotations it is a bit tricky ..
Cheers!
Edited by: olove66 on Aug 7, 2009 2:00 AM

@_@ I guess anyone interested in this topic can turn 2 ASM. Maybe BCEL has not got anything 2 support annotation creation yet.

Plz help! how to create a LinkedList inside each element of ArrayList

Similar Messages

Maybe you are looking for