Adapter missing

Hi all,
I created a new adapter and when I refresh my communication channel monitor, I am not able to see it. I checked the SXI_Cache and it is available in there but invisible in the RWB. What could be the reason?
AR

Antonio,
Instead of using REFRESH button in the Adapter Montoring, try clicking on JDBC and check if it is visible.
if not, then close all windows and try to log on again and check.
Regards,
Bhavesh

Similar Messages

SOAP Adapter missing payload on receiving web service

Hi there,
I'm having a problem with a File to (asynchronous) SOAP Adapter scenario that is currently baffling me.
I wonder if anyone out there has any troubleshooting ideas for this one?
The source message is being picked up OK and I can see from Communication Channel Monitoring on the Runtime Workbench that it is allegedly being delivered to the Web Service OK.
All the entries in the audit log point to a successful scenario and I can view the payload in the Message Content "payload" area.
However on the web service / server side the message is completely blank. Somewhere along the line the payload has gone missing.
I can copy and paste the payload manually into the web service test area and this is fine.
Any ideas/suggestions as to what could be happening with this or how I might go about troubleshooting it?
Many thanks
Ian

Thanks Bruno,
It looks like you were right...
In the end we used Wireshark - a packet sniffing application - to check what was actually hitting the destination server. We found that the content was arriving at the server but the web service wasn't accepting the format. The creators of the web service are now investigating why and will hopefully will advide me of the format error in the message. But at least I was able to prove that the message was getting there which was the focus of this query.
Regards
Ian

SFTP with FTP Adapter - Missing class: com.maverick.ssh.SshTransport

Hi,
I am trying to use the SFTP with FTP Adapter for a project requirement.
I have followed the steps as mentioned in the below link
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CACDFFFB
Have configured the oc4j_ra.xml file, but after creating a sample BPEL process with the FTP adapter, got this error message in the log file.
<2010-04-12 11:21:16,493> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Uncaught exception oracle.classloader.util.AnnotatedNoClassDefFoundError in JCA-work-instance:FTP Adapter-4 - cause:
Missing class: com.maverick.ssh.SshTransport
Dependent class: oracle.tip.adapter.ftp.SshImpl.SshImplFactory
Loader: FtpAdapter:0.0.0
Code-Source: /D:/product/10.1.3.1/OracleAS_1/j2ee/home/connectors/FtpAdapter/FtpAdapter/ftpAdapter.jar
Configuration: <code-source> in D:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\FtpAdapter\FtpAdapter
The missing class is not available from any code-source or loader in the system.
I tried getting a trial licencse for the maverick SSH tool from http://www.3sp.com/requestEvaluation.do?productCode=MAVERICK as discussed in one of the threads, but it redirects to http://www.barracudanetworks.com/ns/products/sslvpn_overview.php
Could anyone please help in this?
OR
Provide steps on how to use SFTP with FTP Adapter.
Regards,
Varun

Hi,
Thanks for the reply.
As per client's requirement, we shouldn't be using java service for this functionality.
And as you said, the oracle adapters are not taking anywhere, but guess have no other choice..
Cheers,
Varun

SFTP adapter - missing maverick java classes

Hi
We have using the BPEL PM Developer (10.1.3.1).
We have tried to use the SFTP with the FTP Adapter. We configured the oc4j_ra.xml file, but after creating a sample BPEL process with the FTP adapter we got this error message in the log file:
"Missing class: com.maverick.ssh.SshTransport"
We have searched for this classes in the BPEL PM developer directory but we could not find jar or class files.
Has anybody use it or not? The maverick class files are not free, and the documentations does not contain the we need to buy third party software to use SFTP with FTP adapter.
Zoltan

Hi,
So the steps are:
1. I've started with a blank new asynchronous BPEL project.
2. I dropped only an FTP adapter (to put a binary file on a remote
machine, schema is opaque) to the swimlane.
3. I made some assignments to the input and output variables,
to fix the warnings and deployed into my BPEL PM server (running on
localhost).
4. When I started this BPEL process it stopped with this error message:
Missing class: com.maverick.ssh.SshTransport
Dependent class: oracle.tip.adapter.ftp.SshImpl.SshImplFactory
Loader: FtpAdapter:0.0.0
Code-source: /C:/oracle/soa/bpel/system/appserver/oc4j/j2ee/home/connectors/FtpAdapter/FtpAdapter/ftpAdapter.jar
Configuration: <code-source> in C:\oracle\soa\bpel\system\appserver\oc4j\j2ee\home\connectors\FtpAdapter\FtpAdapter
The missing class is not available from any code-source or loader in the system.
5. My oc4j-ra.xml file for the FtpAdapter:
<?xml version="1.0"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-factories-10_0.xsd" schema-major-version="10" schema-minor-version="0" >
     <imported-shared-libraries>
          <import-shared-library name="oracle.bpel.common"/>
          <import-shared-library name="oracle.xml"/>
     </imported-shared-libraries>
     <connector-factory location="eis/Ftp/FtpAdapter" connector-name="Ftp Adapter">
          <config-property name="host" value="myhost"/>
          <config-property name="port" value="22"/>
          <config-property name="username" value="myusername"/>
          <config-property name="password" value="mypwd"/>
          <config-property name="keepConnections" value="true"/>
          <config-property name="serverType" value="unix"/>
          <config-property name="serverLocaleLanguage" value=""/>
          <config-property name="serverLocaleCountry" value=""/>
          <config-property name="serverLocaleVariant" value=""/>
          <config-property name="serverEncoding" value=""/>
          <config-property name="useFtps" value="false"/>
          <config-property name="walletLocation" value="C:\wallet\ewallet.p12"/>
          <config-property name="walletPassword" value="welcome1"/>
          <config-property name="channelMask" value="both"/>
          <config-property name="securePort" value="990"/>
          <config-property name="keyStoreProviderName" value=""/>
          <config-property name="keystoreType" value=""/>
          <config-property name="keystoreAlgorithm" value=""/>
          <config-property name="enableCipherSuits" value=""/>
          <config-property name="proxyHost" value=""/>
          <config-property name="proxyPort" value=""/>
          <config-property name="proxyUsername" value=""/>
          <config-property name="proxyPassword" value=""/>
          <config-property name="proxyType" value=""/>
          <config-property name="proxyDefinitionFile" value=""/>
          <config-property name="useProxy" value="false"/>
          <config-property name="useSftp" value="true"/>
          <config-property name="authenticationType" value="password"/>
          <config-property name="preferredKeyExchangeAlgorithm" value="diffie-hellman-group1-sha1"/>
          <config-property name="preferredCompressionAlgorithm" value="zlib"/>
          <config-property name="preferredDataIntegrityAlgorithm" value="hmac-sha1"/>
          <config-property name="preferredPKIAlgorithm" value="ssh-rsa"/>
          <config-property name="privateKeyFile" value=""/>
          <config-property name="preferredCipherSuite" value="3des-cbc"/>
          <config-property name="transportProvider" value="socket"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
</oc4j-connector-factories>
Thanks for your answer in advance!
Zoltan

Bluetooth adapter missing from Lenovo L440

Hi,
My bluettoth adapter went missing one day suddely. I checked in network connection and device manager but its not showing up anywhere. Went to lenovo website and installed drivers but still nothing is happening

you are right, this is very silly! ")
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

JDBC adapter missed data from database

Hello Experts
We have a repeatative issues in JDBC sender adapter .While it is reading data from database sometimes we are facing the problem tat all the data is not read by adapter but PI read date is generated for all the records.
Some times the issue happened like PI processed first three and last three data but missed 2-3 records from the middle portion.
Please help me to know the reason for this error and how to resolve this types of error.
Thanks in advance .
Somenath

Hello Stefan ,
Thanks a lot for your reply .
We have used the below Select and update statement
I am not expert in select query .Please suggest if the query is okay or it can be the error.
SELECT * FROM [database].[dbo].[table] WHERE [Delivery_Number] = (SELECT TOP 1 [Delivery_Number] FROM [database].[dbo].[table] where [PI_Read_Date] IS NULL ORDER BY [Delivery_Number] ASC) AND [PI_Read_Date] IS NULL ORDER BY [Transaction_ID] ASC
UPDATE [database].[dbo].[table] SET [PI_Read_Date] = getdate() WHERE [Transaction_ID] in ( SELECT [Transaction_ID] FROM [database].[dbo].[table] WHERE [Delivery_Number] = (SELECT TOP 1 [Delivery_Number] FROM [database].[dbo].[table] where [PI_Read_Date] IS NULL) AND [PI_Read_Date] IS NULL)
Please let me know what new features we can get if we set the the advanced parameter serializable.
Hello Navin,
We are using toad at data base side .If the lock occurs in the database side is it possible to generate tHe PI read date as the data is not read by PI?
Thank you once again for you help.
BR.
somenath

Dock adapter missing

web page states "in the box" as ipod,usb,earphones,case,quick start guide AND dock adapter...no adapter in my box..in fact icons on top of box only show symbols for earphones,usb, and guide...I just bought a nano for my girlfriends birthday..apple page says it should have adapter inside..but reading the back of the package it only states..guide,usb,earphones...what's going on!?
imac 20" Mac OS X (10.4.8)
imac 20" Mac OS X (10.4.8)

I just got a 30GB Video iPod - thought the dock adapter was not included - after reading this thread I thought maybe Apple had deciced to stop including the part and had not yet updated the web and print documentation. Figure a piece of plastic 2.5inches or so long, an inche wide and half an inch thick would not be so easy to miss - but, thank goodness I checked before garbage day - the dock adapter was in the wihte plastic pouch that held either the headphones or the USB cable - not sure which. No icons or other indications that the adapter was included on the packaging.

T510 wifi adapter missing

I have a T510 (4349) that I added a Intel Centrino Advanced-N 6200 ( P/N 60Y3230) to. It is not being recognized by the operating system windows vista. When looking at the device manager the adapter is not listed and there are no adapters with ? marks. I have installed all of the driver for the adapter but no luck. I have also tried a second adapter with the same results. I have installed the latest bios and have checked the bios setting to enable power to the wifi and wlan connectors.
It seams that I am missing something very basic but at this point I do not what it would be.
If any one has any suggestions I would appriciate your thoughts.

Good evening and welcome to the community.
Do the steps starting on manual page 80 of your Hardware Maintenance Manual:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74250 look like what you're doing to install the WLAN card? Does it seem seated properly?
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Hamachi Network Interface Adapter Missing

I was running Windows 7 and Hamachi was working perfectly fine. However, since updating to Windows 10, I've been getting a tunnel error, Hamachi reports the error as:
Failed to connect to the network adapterPeer is not accessible via VPN. After looking into the problem, I've noticed that the Hamachi Network Adapter is missing from my device manager and network connections. I've tried using cmd (in administrative mode) to do the commands: hamachi-2.exe --upd-taphamachi-2.exe --add-tap "Hamachi" The first command gives me
07/30 14:09:39.087 [11620] hamachi-2.exe07/30 14:09:39.104 [11620] assert pos != -1 in ..\client2\engine\win32\main.cpp:325 while the second command: 07/30 14:09:48.727 [12256] tap: add_tapdev(Hamachi)07/30 14:09:48:731 [12256] tap: list_netdev_win32() ..07/30 14:09:48:775 [12256] tap: existing tap found, internal name [Hamachi Network Interface] I've reinstalled hamachi multiple times and now I'm at a complete loss at what to do. I would be very much appreciated if anyone can help me solve this problem.

I've had the same problem. I've tried manualy instaling the Virtual network adapter by following the steps here http://help.logmein.com/articles/en_US/Documentation/hamachi-hamachi-troubleshooting-nwadapter/?l=en_US&fs=Search&pn=1That put a hamachi network in my "Network Connections" but its an "Unidentifed Network" and the tunnel still dosesn't work.

14z-v000 LAN Network adapter missing

Realtek LAN Network Adapter is missing and i'm unable to reinstall it. I tried to reinstall the Realtek LAN Driver but it keeps telling me "Realtek Network Controller was not found. If Deep Sleep Mode is enabled Please Plug Cable." Also the same message occurs when I try and reinstall the Realtek Network Controller Driver. I have attempted to restore to a previous time when I had the Ethernet Adapter and the LAN connection was working. Note that i do have access to the internet through the Wireless network adapter and wireless network but in device manager I'm completely missing the adapter for the Realtek LAN Connection. Even when I plug in a Ethernet cord into the computer through the port on the side, it still doesn't detect any sort of activity. Both the orange and white lights are always on even if unpluged.

Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More I understand that you have lost your network capability on your notebook and are unable to do a restore back to when it was working. You are unable to install drivers for the LAN devices. Have you checked for viruses and malware? MS Malicious Software Removal Tool Would you do this step, which will scan for corrupted files and try to repair them. Go to the command prompt and run as administrator. Press Windows key +C to open charms.Type command prompt in the search bar.Right click and run as administrator.Type sfc /scannow and press enter.Once this completes restart your notebook and repeat this process once more. Now open Device Manager and show hidden devices, if the network adapters are not showing scan for hardware changes. Next you can try a HP PCs - Refresh Your PC to Resolve Problems (Windows 8). This will reinstall the operating system and should not affect your personal files. If the network adapters are still not listed in the Device Manager, I would test the network adapter for a hardware failure. HP Notebook PCs - Testing for Hardware Failures (Windows 8). Network should be listed under the component test in the UEFI which is the one you want to utilize. If for any reason that options is not available or the adapter is not recognized, if warranty is not a concern you can try reseating the network card. The next step would be to try a recovery back to factory.HP PCs - Performing an HP system recovery (Windows 8) During the recovery there is an option to backup your personal files to prevent data loss. If you have not already done a backup I suggest you do one now. HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8) You can contact HP support for assistance or repair options at any time.Please contact HP support at Contact HP Support If you are not in warranty and you determine a repair is necessary you may also consider a local repair shop. To say thanks for replying please click the thumbs up icon below.If this resolved your difficulty please notify people by choosing solution provided. Good Luck.

DVI to ADc adapter- missing ac power cord

HI, I recently obtained an dvi to adc adapter for my apple display however the adapter came without the ac cord which powers the thing. Normally this wouldn't be a big issue, but because it is an apple product the cord that powers the adapter has a unique 3 leaf clover dongle which makes
it difficult to replace. I was wondering if there is some way to either obtain another ac cord or to adjust an existing widely available ac cord to fit the adapter's form factor.

I would like to connect to my unibody MBPro, and I'm assuming I'd be using a Mini Display > DVI adapter, then a DVI > ADC adapter (found a few but not positive they're exactly what I need).
You need a MiniDisplayPort to DVI adapter
<http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0MQ>
followed by a DVI to ADC adapter
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MjE0NTg4NA>
MY QUESTION: since the ADC display was buss powered through the G4, will it still work with my MBPro using the proper adapters?
The DVI to ADC adapter contains a power supply for the display. (That's why it costs so much.) Although this setup should work, there might be problems, since the two adapters might not be completely compatible. See if they will let you bring your display and MBP to the store to try them.

Sender File Adapter missing processing parameters

Hi All,
On my Dev box in ID for configurations of Sender File adapter I am able to see the following options:
1) Handling of Empty Files
2) Archive Source Files with Errors
But I am unable to see them on QA box.What could be the error.

Hi All,
I checked the metadata in IR in Dev and QA.
They are different.
In QA i dont see the " Handling of Empty Files"
What could be the problem
Thanks

Bluetooth adapter missing

After years of reliable service, my bluetooth adapter quit last night on my Mac Pro 5,1 (mid 2010) 12 core tower. I have been using Apple's wireless keyboard, magic mouse, magic trackpad, bluetooth keypad, and logitech wireless headset until I went to launch a Steam game and the mouse just quit moving. Of course I changed batteries, etc and finally found and tried my old wired keyboard and mouse.
When I go into System Information and look at the Bluetooth section under Hardware I have ?No information found" for the bluetooth adapter. Everything else looks like it should with no errors. The bluetooth status in the status bar is grayed out with a Not Available message.
So I am looking for an apple replacement part for the bluetooth adapter as I understand that EFI firmware updates require an integrated bluetooth adapter or you lose keybpard support for that process I would also like to know if anyone has tried other third-party bluetooth dongles or add-in cards with success.
Thanks for any advice you might have.

I'm back and working, I reset the NVRAM.
To do so, follow these simple steps:
Power off the Mac Pro
On a wired keyboard press Command+P+R and hold them
Power on the Mac Pro
While continuing to hold the COMMAND+P+R keys wait for the system to boot into the System Utilities screen. At that point all the wireless (bluetooth) devices were working so I restarted the Mac.
If anyone has any third-party bluetooth adapter suggestions I'd love to hear about them all the same.

Sender RFC Adapter, missing import structure in inbound messages

Hi, I have a simple scenario RFC- RFC-Adapter - XI - SOAPAdapter - Webservice.
RFC has import parameter eblen type ekko-ebeln, and s_ekko type ekko.
Tables, it_ekpo, it_eket etc.
If i execute my interface, the tables and import parameter eblen is showed in Messages but not s_ekko. Import parameter is not empty. Th empty tables are showed to with tag </it_eket> but not s_ekko, if it doesnt exist.
I reimport rfc and maked complete cashe refresh but it doesnt help.
Have any an idee.
Thanks and regards
Hüsniye

Have you done a CPA Cache refresh? Do this by opening URL http://server:port/CPACache/refresh?mode=full on your XI server.
The adapter engine caches metadata and sometimes this can get a bit out of sync. Try refreshing the CPA Cache or disabling and then re-enabling your RFC Adapter.
MJ

File Adapter: Missing/Unprocessed files

Hi All,
Anyone encountered this before.
1.I have ten files in the staging directory
2.File adapter reads and renames the files to *.csv, deletes the file in staging directory and transfers it to archive directory.
3.In the BPEL Console only 7 out of 10 files is processed
This happens regularly and I cannot automate the process for fear of losing files. If I push the unprocessed files in the staging directory again, it will work. My workaround so far is to push the files one by one so I can easily identify the unprocessed files. I tried adjusting the polling frequency and minimum age to a bigger value in the wsdl file but it didn't work.
Any help is appreciated.
Thanks,
K.R.

Hi All,
Modified three files to solve the problem.
1.ESB_Config.ini - increase the JTA timeout from 60 to 300
2.data-sources.xml -
added the ff. in the BPELPM_CONNECTION_POOL
initial_limit="10" max-connections="20" min-connections="10"
changed the factory class from oracle.jdbc.OracleDriver to oracle.jdbc.pool.OracleDataSource
3.transaction_manager.xml - change transaction timeout from 30 to 300.
Regards
K.R.

JDBC Adapter :: Missing Column Headings

Hi,
I was wondering if anyone has encountered this issue with the JDBC sender adapter. After executing the following SQL select statement:
SELECT rake_yem, rake_serial_no
FROM rt_rake_ore_wt_smy
WHERE reading_datetime > SYSDATE - 2
The JDBC Sender adapter returns the following XML structure:
<?xml version="1.0" encoding="utf-8"?>
<RakeOreWeightSummaryReadings>
<row>
    <>2006</>
    <RAKE_YEM>2226A</RAKE_YEM>
</row>
<row>
    <>2006</>
    <RAKE_YEM>2226B</RAKE_YEM>
</row>
<row>
    <>2006</>
    <RAKE_YEM>2229A</RAKE_YEM>
</row>
<row>
    <>2006</>
    <RAKE_YEM>2229B</RAKE_YEM>
</row>
<row>
    <>2006</>
    <RAKE_YEM>2223B</RAKE_YEM>
</row>
</RakeOreWeightSummaryReadings>
In this case, the first column heading is blank. This leads to an XML parsing problem, and hence it cannot be processed by SAP XI.
The incidence of blank columns appears to be inconsistent. i.e. It does not matter how many columns I select, as some columns will always be blank.
Any help would be greatly appreciated.
regards,
Carl Engel.

Hi Naveen,
No luck I'm afraid. I changed the SQL statement to:
SELECT rake_yem as RAKE_YEM, rake_serial_no as RAKE_SERIAL_NO FROM rt_rake_ore_wt_smy WHERE reading_datetime > SYSDATE - 2
And the JDBC adapter returned with:
<?xml version="1.0" encoding="utf-8"?>
<RakeOreWeightSummaryReadings>
     <row>
          <>2006</>
          <RAKE_YEM>2229A</RAKE_YEM>
     </row>
     <row>
          <>2006</>
          <RAKE_YEM>2229B</RAKE_YEM>
     </row>
     <row>
          <>2006</>
          <RAKE_YEM>2223B</RAKE_YEM>
     </row>
etc.....
Though I'm beginning to suspect that this problem may be associated between Oracle versions. The integration server is running Oracle 9.2 Client, and it is accessing a database running Oracle 7.3.3.5.
Though since the data is retrieved without issues, I'm still not sure. Is there any other form of diagnostic logs that I could examine re: this issue?
thanks,
Carl.

Adapter missing

Similar Messages

Maybe you are looking for