Plz help me to create pending sales order report

Hi all,
           I need these INPUT AND OUTPUT FIELDS :
          Pending Sales Order Requirement Specification:
          1.   Fields on selection screen (input screen) : Plant From to , Distribution channel From to , division from to , date from to , Customer code from to.
          2.   Field in the output List :    Customer Code , Customer Name , Sales Order Number , sales Order Date , Material , open Qty , Scheduled Qty , Deliver Qty , Balance Qty , Value , Total Value .

Hi
use the tables
KNA1 -for Customer Number,Name (link KNA1-KUNNR =VBAK-KUNNR)
VBAK -Sales order Header (VKORG,VTWEG,SPART, AUDAT, KUNNR on selection screen) VBELn, AUDAT,NETWR for output fields
VBAP -Sales Order item .Take WERKS(plant) for selection screen
MATNR,KWMENG (qty) and NETWR for Output
VBEP- Schedule line data
LIPS - Delivery data equate lips-vgbel and lips-vgpos with vbap-vbeln and vbap-posnr and fetch the Delivery qty
OPEN qty = Order Qty - Delivery Qty
VBAP-KWMENG - LIPS-LFIMG
Regards
Anji

Similar Messages

Can any one help in creating a sales order

Can any one help in creating a sales order using va01 transaction ?
I have a reference sales order number .
Reason why I need this sales order :- I need it to check my task.
The task was to generate a routine using VOFM ,create a Ztable with fields:sales area and condition types .The routine is activated if the combination of condition types and sales area exists in the Ztable.
Can anyone tell me what is relationship between the three :Ztable ,routine and sales order?

VA01 - Create Sales Order
Use these steps to create a sales (or project) order for the purpose of billing a cost reimbursable project. The sales order is the document that links the sponsor to the project.
Get started (SAP menu path, fast path)
Create sales order: initial screen
Create project order: overview
Create Variant to simplify VA01 data entry
1. Get Started
SAP menu path: (not in role ZSBM)
SAP Fast Path
At the Command Line, enter: /nVA01
2. Create Sales Order: initial screen
Order Type: (Use default = "ZPS" for Project Order)
Organizational data: (Use defaults)
Sales organization ("1000" for Sponsored Billing)
Distribution channel ("10" for MIT Distribution Channel)
Division ("10" for MIT Division)
or ENTER
The Create Project: Overview screen displays, as shown below.
3. Create Project Order: overview
Sold-to party (type in 10-digit sponsor ID number, as shown below)
In Material field of first line item: (type PROJECT to identify as sales order for sponsor billing, as shown below)
(or ENTER)
Result: A field for entering the WBS element displays, as shown below.
WBS element (type in 7-digit WBS number for project)
Click on or F11 to SAVE.
A message states that Project order XXXX has been saved.
4. Create Variant to simplify VA01 data entry
Run VA01 as described in step 1, so that the "Create Project Order: overview" screen displays (shown at start of step 3).
On Item Overview tab, scroll to right to find WBS element column (about half way across).
Click on column title, WBS Element; hold and drag all the way to left; then drop next to Material column, as shown below.
Click on tiny (multicolored) icon above vertical scroll bar (shown above, to far right) to display Table Settings dialogue box, shown below.
Under Maintain Variants, type name for Variant, for example "my_settings" (leaving Use as standard setting checked); click on Create; then click on Save button to close dialogue box.
From now on, the WBS element column displays next to Material column when you run VA01.
Check the path as
http://web.mit.edu/cao/www/SB2002/CR/VA01.htm

Can we create a sales order with refrence to a purchase order(me21n)

hi all
I have a query can we create a sales order with refrence to a po.my scenerio releted warehouse. I am recievening a the goods from client (from port) and storing it in my warehouse. so i m charging the client some cost(transporation cost ,machine handling cost etc) so when I am doing goods reciept(po----inbound delevery). so the moment i will doing the grn i want to charge my customer. so i want to create a invoice . so please suggest me how to map this scenerio in sap. plz plz help me out

Not possible to create sales order with reference to PO.
but if to capture cost, you can consider adding cost to customer's invoice.
e.g.
SO -> PO -Inb/IR -> GR -> OB -> Inv(Add here)
to add in that invoice, its either manual or through automatic condition.

Pop up message for pending sales order.

My requirement is whenever a zgor sales order is being created for a particular material,if a pending sales order exists for the same material,the message should pop up : "number of sales orders pending for the given material",
Pls help me how to write coding for this to deliver a pop up message.

Hi,
You need to find the correct exit for your req. se38 -> sapmv45A-> INCLUDE MV45AFZZ and check the triggering point before saving the sales order . Write your necessary POPUP code..
Regards,
Kumar.

Automatic creation of intercompany PO when creating a Sales Order

Hi Experts
Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has setup a logistics company (company code X), which its purpose is to deliver goods to the final customer (home customers). However, sales orders are created from seperate chain of stores which belong to another company code (company code Y). This chain of stores have one sales organisation (since there is over 1000 stores under a chain). I need a way to represent that a sale originated from a store/plant belonging to company Y to end customer A. Also, I need a billing document (intercompany) from company code X to store/plant beloning to company Y.
Issues: in the intercompany config (assign intern customer numbers to sales org) - is there a way to assign a customer number at site/plant level so that when creating an intercompany billing it can be picked instead of the one assigned to the sales org and where can this be specified in the sales order (remember: in my scenario there are multiple stores/plants that belong to one sales organisation and it is not possible to use one customer number linked to the sales organisation.)
Desired results:
Sales order from store/plant YY belonging to company code Y to end customer A
Intercompany billing from plant XX belonging to company code X to store/plant YY
End customer billing from store/plant YY to end customer A
Thank you in advance for your help.

Hello Tsmash
I think you can acheive this with Regular Sales order + Inter Company STO combination.
Maintain customer numbers for each of the Plants from Company Y for the sales area belonging to Company X.
Then do the config for STO in MM using this menu path:
SPRO/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order
Here, in the activity 'Define Shipping Data for Plants', enter each of the plant-customers and the Sales area belonging to Comany code Y. Carry out other activities in this area appropriately.
Similarly set up Custom ( say Z1) Special Procurement type for Plant YY for stock transfer from XX using this menu path:
SPRO/Production/Material Requirements Planning/Master Data/Define Special Procurement Type:
Here maintain procurement type as F, Special procurement as U and plant as XX. You may need to repeat this config for each of the receiving plants (over 1000 stores under a chain) from co code Y.
In the material master MRP 2 for Plant YY, maintain procurement type as F and Special Procurement as Z1.
Sales order will be received under Co Code Y and sales area belonging to Y form customer A,
Because of the MRP config, a PO (STO) requirement will be raised on Co code X and plant XX. XX will send the goods to YY via a STO delivery using the Shipping data from 'Set up STO' config,
Plant YY will send the goods to A and bill that customer. Co Code X will raise an inter-comany bill on Co code Y.
That's how it should work. Try it and revert with any issues.

Question on Search Help and Authorization Check for Sales Order Type

Question 1:
When I go to VA01 and click the search help, it shows only order type that are not blocked.
However, when I have sales order type in select-options of a Z program,
S_AUART FOR VBAK-AUART
I click on the search help, it gives all the sales order types. How can I have a list with unblocked sales order type only?
Question 2:
I want to check whether a use can extract data from a sales order type (e.g. OR and RE)that he/she authorized to use.
I have include the following in my program:
AUTHORITY-CHECK OBJECT 'AUART'
ID 'AUART' FIELD 'OR'.
It always returns SY-SUBRC = 12.
But order type 'OR' is granted to the user (he/she can create order with type OR in VA01)
Please kindly give me some ideas, thanks.

hi,
ad1
use following code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR auart.
PERFORM auartGet.
FORM auartGet.
    CALL FUNCTION 'RV_HELP'
         EXPORTING
              KEY            = VKORG
              KEY2           = VTWEG
              KEY3           = SPART
              KEY4           = '0'
              NUMBER         = '008'
              FIELD_IN       = AUART
         IMPORTING
              FIELD          = AUART.
ENDFORM.
ad2.
example:
   AUTHORITY-CHECK OBJECT 'V_VBAK_AAT'
         ID 'AUART' FIELD 'OR'
         ID 'ACTVT' FIELD '01'. "01-create order, 02-change, 03 display
check sy-subrc eq 0.
regards,darek

Creating SD Sales Orders from a Purchase Order

Does anyone have any detail documentation for creating an SD Sales Order as an output message from a purchase order. We would like to implement a process where we generate a sales order to a specific sales organization automatically from a purchase order in a different company code.
Any help would be appreciated.

Hi,
You can configure this scenario using ALE/IDOC . I dont have any docs but i remember that i had setup this few years ago.
Create PO , attach output type , output type linked to process code , process code linked to sales order relevant IDOC Type and send to receiver as outbound IDOC ,
The recepient receives this as an inbound and used this data to create a sales order in his company code.
Thanks,
Sudhi

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

Create a Sales Order with Reference to Contract using IDoc / LSMW ( AFS )

Hi Gurus,
I need to crate a Sales Order with reference to a Contract. I need to upload Sales Orders with reference to contract via LSMW.
So far, I've been able to create the Sales Order with ref to contract. But, the Sales Order Quantity is not getting deducted from the Original Qty in Referred Contract ( When try to create another Sales Order referring to the same Contract.) When a Sales Order is created manually, this is working fine.
Please tell me if I've missed some parameter which stopping it create the link to exact schedule line ( Sizes level )
The Details of the IDoc which is been created via LSMW are as follows;
Message Type: ORDERS
Basic Type     : /AFS/ORDERS05
Process Code : ORDE / DELO
( Tried with both process codes. But the Identification is the same for both: IDOC_INPUT_ORDERS )
*_In Header;_
Segment : E1EDK02 - IDoc: Document header reference data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped for field BELNR
*_In Item;_
Segment : E1EDP02 - IDoc: Document Item Reference Data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped to field BELNR
Line Item of the Contract is mapped to field ZEILE
I also tried passing the Schedule line of Contract in Segment : E1J3P01 AFS IDoc: Doc.item general data
to following fields;
J_3AETENV
J_3AVGETE
/AFS/UETENR
Still its not getting updated in the VBEP also..
Please help me with regard to this. Points will be awarded for your valuable contribution.
Thanks.

Hi,
This issue is been resolved.
One of my friend helped me with resolving this issue..
Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
u2022     SPRO --> SD -->Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types --> Field : Outline agreement message; from blank to u201CBu201D.
u2022     SPRO -->SD -->Sales --> Sales Documents --> Sales Document Header --> Maintain Sales Document Types for AFS --> Field : Outline agreement message; from blank to u201CAu201D

Schedule Agreement used to create a sales order

We are trying to use schedule agreements to create a sales orders, but
the delivery quantity in not updated within the Item data / schedule
lines of the schedule agreement.
LP (schedule agreement)-> OR (sales order) -> LF delivery (PGI)
Completing the above process, the delivery quantity does not get
updated. Can standard SAP handle this functionality?
Fábio Brancati

Hi Brancati,
As per the standard you can create directly delivery from the scheduling agreement no need to creation of sales order.
I hope it will help you,
Regards,
Murali.

Trying to create a sales order in CRM with BAPI_BUSPROCESSND_CREATEMULTI.

hi all,
I am trying to create a sales order in CRM using the BAPI BAPI_BUSPROCESSND_CREATEMULTI.
I need the sales order number as the out put. So I am declaring OBJECT_ID as the export parameter.
This is my source code, I donu2019t get an error, but the sales order is not generated and I donu2019t get any output for my export parameter OBJECT_ID.
I am setting the tables HEADER,ITEM ,SALES,PARTNER, ORGANISATION, RETURN and
    SCHEDULELINE in BAPI_BUSPROCESSND_CREATEMULTI. But still unable to display the sales order number. Please help me with information
This is my code
***********************************Define the Internal Tables*************************
DATA: IT_HEADER TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS WITH HEADER LINE.
DATA: IT_SALES TYPE STANDARD TABLE OF BAPIBUS20001_SALES WITH HEADER LINE.
DATA: IT_ITEM TYPE STANDARD TABLE OF BAPIBUS20001_ITEM WITH HEADER LINE.
DATA: IT_SCHEDULELINE TYPE STANDARD TABLE OF BAPIBUS20001_SCHEDLIN WITH HEADER LINE.
DATA: IT_PARTNER TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS WITH HEADER LINE.
DATA: IT_ORGANIZATION TYPE STANDARD TABLE OF BAPIBUS20001_ORGMAN_INS WITH HEADER LINE.
**Values for Internal Table IT_HEADER**
IT_HEADER-PROCESS_TYPE = 'YWEB'.
IT_HEADER-DESCRIPTION   = 'Web Order'.
IT_HEADER-POSTING_DATE = 'SY-DATUM'.
IT_HEADER-CREATED_BY    = 'SY-USER'.
APPEND IT_HEADER TO IT_HEADER.
**Values for Internal Table IT_SALES**
IT_SALES-PO_NUMBER_SOLD = '1'.
APPEND IT_SALES TO IT_SALES.
**Values for Internal Table IT_ITEM**
IT_ITEM-NUMBER_INT = '20'.
IT_ITEM-ORDERED_PROD = '50000180'.
IT_ITEM-ITM_TYPE = 'ZABC'.
APPEND IT_ITEM TO IT_ITEM.
**Values for Internal Table IT_PARTNER**
IT_PARTNER-REF_PARTNER_NO = '100000620'.
IT_PARTNER-REF_PARTNER_FCT = 'CRMH04'.
APPEND IT_PARTNER TO IT_PARTNER.
**Values for Internal Table IT_ORGANIZATION**
IT_ORGANIZATION-SALES_ORG = 'O 50000100'.
IT_ORGANIZATION-DIS_CHANNEL = '30'.
IT_ORGANIZATION-DIVISION = '80'.
APPEND IT_ORGANIZATION TO IT_ORGANIZATION.
**Values for Internal Table IT_SCHEDULELINE**
IT_SCHEDULELINE-QUANTITY = '2.268'.
APPEND IT_SCHEDULELINE TO IT_SCHEDULELINE.
**Call BAPI_BUSPROCESSND_CREATEMULTI for creating a sales 0rder******
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
TABLES
    HEADER                  = IT_HEADER
    ITEM                    = IT_ITEM
    SALES                   = IT_SALES
    PARTNER                 = IT_PARTNER
    ORGANISATION            = IT_ORGANIZATION
    RETURN                  = IT_RETURN1
    SCHEDULELINE            = IT_SCHEDULELINE.
****************CALL COMMIT WORK**********
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    WAIT          = 'X'
IMPORTING
   RETURN        = IT_RETURN2.
ENDFUNCTION.
Edited by: jessica sam on Dec 10, 2008 1:45 AM

Hi am getting the sales order but the item data is not available in sales order. Also should I generate a new guide always for HEADER, ITEM, PARTNER, ORGANIZATION, SCHEDULELINE,u2026u2026for the tables that I use?
I mean do I need to create a new guide each time for all the tables that I use and finally pass only header guide to the bapi 'BAPI_BUSPROCESSND_SAVE'.
I donu2019t know why I am not getting the product data in the saved sales order please help me.
this is my code
***TABLES
DATA: IT_HEADER TYPE TABLE OF BAPIBUS20001_HEADER_INS.
DATA: IT_INPUT_FIELDS_FILL TYPE TABLE OF BAPIBUS20001_INPUT_FIELDS.
DATA: IT_ITEM TYPE TABLE OF BAPIBUS20001_ITEM.
DATA: IT_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS WITH HEADER LINE.
***WORK AREA
DATA: WA_INPUT_FIELDS TYPE BAPIBUS20001_INPUT_FIELDS.
DATA: WA_HEADER TYPE BAPIBUS20001_HEADER_INS.
DATA: WA_ITEM TYPE BAPIBUS20001_ITEM.
DATA: IT_EV_GUID_32 TYPE GUID_32.
DATA: IT_EV_GUID_32_1 TYPE GUID_32.
*Create GUID
CALL FUNCTION 'GUID_CREATE'
IMPORTING
    EV_GUID_32       = IT_EV_GUID_32.
* Fill the HEADER
WA_HEADER-GUID                      = IT_EV_GUID_32.
WA_HEADER-PROCESS_TYPE              = 'ZWEB'.
WA_HEADER-DESCRIPTION               = 'WEB ORDER'.
WA_HEADER-CREATED_BY                = 'jiopidn'.
APPEND WA_HEADER TO IT_HEADER.
*For each FIELD of HEADER fill INPUT_FIELDS
WA_INPUT_FIELDS-REF_GUID               = IT_EV_GUID_32.
WA_INPUT_FIELDS-REF_KIND               = 'A'.
WA_INPUT_FIELDS-OBJECTNAME             = 'ORDERADM_H'.
WA_INPUT_FIELDS-LOGICAL_KEY            = '1'.
WA_INPUT_FIELDS-CHANGEABLE             = ' '.
WA_INPUT_FIELDS-FIELDNAME              = 'PROCESS_TYPE'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
WA_INPUT_FIELDS-FIELDNAME              = 'GUID'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
WA_INPUT_FIELDS-FIELDNAME              = 'DESCRIPTION'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
WA_INPUT_FIELDS-FIELDNAME              = 'CREATED_BY'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
*Create your own GUID
CALL FUNCTION 'GUID_CREATE'
IMPORTING
    EV_GUID_32       = IT_EV_GUID_32_1.
* Fill the ITEM
WA_ITEM-GUID              = IT_EV_GUID_32_1.
WA_ITEM-NUMBER_INT        = '10'.
WA_ITEM-ORDERED_PROD      = '000000000070000000'.
WA_ITEM-ITM_TYPE          = 'ZTAN'.
WA_ITEM-MODE              = 'A'.
APPEND WA_ITEM TO IT_ITEM.
*For each FIELD of ITEM fill INPUT_FIELDS fields
WA_INPUT_FIELDS-REF_GUID               = IT_EV_GUID_32_1.
WA_INPUT_FIELDS-REF_KIND               = 'A'.
WA_INPUT_FIELDS-OBJECTNAME             = 'ORDERADM_I'.
WA_INPUT_FIELDS-LOGICAL_KEY            = '1'.
WA_INPUT_FIELDS-CHANGEABLE             = ' '.
WA_INPUT_FIELDS-FIELDNAME              = 'GUID'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
WA_INPUT_FIELDS-FIELDNAME              = 'NUMBER_INT'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
WA_INPUT_FIELDS-FIELDNAME                 = 'ORDERED_PROD'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
WA_INPUT_FIELDS-FIELDNAME                 = 'ITM_TYPE'.
APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
REFRESH: CREATED_PROCESS.
***** CALL BAPI_BUSPROCESSND_CREATEMULTI
               CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
                 TABLES
                   HEADER                  = IT_HEADER
                   ITEM                    = IT_ITEM
                   INPUT_FIELDS            = IT_INPUT_FIELDS_FILL
                   CREATED_PROCESS         = CREATED_PROCESS
                   RETURN                  = RETURN.
IT_OBJECTS_TO_SAVE-GUID = IT_EV_GUID_32.
IT_OBJECTS_TO_SAVE-OBJECT_TYPE = 'BAPIBUS20001'.
APPEND IT_OBJECTS_TO_SAVE TO IT_OBJECTS_TO_SAVE.
**** CALL 'BAPI_BUSPROCESSND_SAVE
CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
EXPORTING
    UPDATE_TASK_LOCAL       = true
    SAVE_FRAME_LOG          = true
TABLES
    OBJECTS_TO_SAVE         = IT_OBJECTS_TO_SAVE
    SAVED_OBJECTS           = ITAB_SAVED_OBJECTS
    RETURN                  = itab_return.
**** CALL BAPI_TRANSACTION_COMMIT
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   EXPORTING
    WAIT = true
IMPORTING
    RETURN = RETURN1.
Edited by: jessica sam on Dec 12, 2008 3:50 AM

Product allocation error while creating a sales order

Hi Gurus,
My client is using the availability check against product allocation functionality in sales order.while I am creating the sales order and entering the material system is throwing the error message product allocation XXX is invalid,after pressing the enter button system has thrown another error "incorrect index structure for table XMVERF_POS/000010" and unable to save the order.
I have checked the material master and the product allocation is assigned in basic data 1 view,I have also checked the IMG settings it has maintained and assigned to infostructure.Please let me know is there any config settings are missing related to product allocation.
Regards,
hari challa.

Please check if storage location is populated for the material. Also may be this material is a non-stock material and not relevant for storage location check.. If you have any non-stock items in your order and if you are populating the storage location in the order automatically, then this happens. Please check your code and bypass the check for non stock items.
Hope this helps
Regards
Sai

Run time error while creating a sales order by va01

hi ,
while i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
error in current abap program "saplv61z" had to be terminated because it has come across the statement that unfortunately can not be executed.
kindly solve my problem.
thanks.

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Error while creating a sales order BAPI_SALESORDER_CREATEFROMDAT2

Hi All,
I am using the BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create a sales order.
I am passing all the required fields and also the rejection code at the item level.
Also I am using a variant configuration material and hence ai am filling the VC config tables.
When I execute this BAPI it is giving me the error 'Item 000010's configuration can no longer be changed' although configuration is maintained for this material.
When I try the same case with no rejection code and with VC configuration, the sales order is created.
When I try the same case again with rejection code and NO VC configuration, the sales order is created.
When I maintain both the rejection code and VC configuration I am getting the error.
Does anyone have any idea what is causing this error or I am supposed to populate any flag in ORDER_ITEMS_INX to get this correctly.
Any answers will be greatly apppreciated!
Thanks
Sandeep

Sandeep,
There are a few SAP Notes that you should investigate, some of which you may have already seen. First, I'd suggest you look at [Note 481102|https://service.sap.com/sap/support/notes/481102] and its three related Notes: [774346|https://service.sap.com/sap/support/notes/774346], [550431|https://service.sap.com/sap/support/notes/550431], [366265|https://service.sap.com/sap/support/notes/366265].
If these Notes do not help then check if [Note 1099414|https://service.sap.com/sap/support/notes/1099414] has been applied in your system. If it has been applied, then [Note 1116144|https://service.sap.com/sap/support/notes/1116144] might solve your issue. If neither of these two notes are applied, then it could be that they both need to be applied. However, if both notes are already applied, then you may want to consider opening a customer message with SAP. Since these two SAP Notes are relatively new, it makes me think that you might have discovered a related error that has not been reported to SAP yet.
Best Regards,
Jamie

Error while Creating a Sales Order for a Configurable Material

Dear Members,
When I am creating a Sales Order for a Material. After Entering the Sold to Party and Material(Variant Configuration) I am getting an error in popup that Derivatiion Rule not defined for the Country IN. Please can you help me out regarding the settings for this.
Thanks,
Farhan.

It seems your issue relates to some non assignment in COPA settings. Hence, check this help link and I hope this will be helpful to you
[Source and Target Fields |http://help.sap.com/saphelp_erp2004/helpdata/en/59/65a2b8dd1711d2a6110060087a7a87/frameset.htm]
thanks
G. Lakshmipathi

Plz help me to create pending sales order report

Similar Messages

Maybe you are looking for