PMS - Is it possible to log changes in cell values/comments in appraisal?

Hi,
One of our requirement is to log the date and time of when the comments section is updated in an appraisal form. I could see the logging enabled in standard allows to view the status changes and associated information. Similarly, is the appraisal form cell value/comment changes are logged? or is there any config we should do to enable this?
Appreciate your inputs!
Thanks
Karthik

it is very much possible. you need to take the help of IA and MA for this. let me know if you have any questions here

Similar Messages

Changing multiple cell values via pop-up?

hi.
back again
I'm reworking my cost estimate sheet and would like to know if the following idea is possible: [the .numbers will probably explain it better than i can]
http://web.me.com/jeffhammond/numbersQ_2.numbers
generally, i will enter unit costs on a job to job basis (or at least spot check pricing per region).. i'll still do this but i'd like to keep the editing off the estimate table and do it on a separate table.. the main reason is that i'll often have to change every cost due to the material requirements.. same dimensions etc but certain jobs require weather resistant materials/hardware.. i'd like to simply switch the type of job on the estimate sheet and bring the correct pricing in.
I'm also not positive that all materials on the estimate sheet will maintain their current position.. i may have to special order something (6x6 -24' ?) for whatever reason in which i'd usually insert it under the post materials.. if need be, i guess i could add any special order materials to a designated are so as not to change any cells.
fwiw, a complete material list will often have over 100 separate item types being ordered from multiple sources.. my main material list has around 450 individual items that i can choose from/order.. (but i have a nice little setup in place to filter only ordered materials and for obtaining individual pdfs per outlet which includes only items they sell).. point being, my example .numbers wouldn't be worth implementing something like this but the real list is more intense.
any ideas?
thanks
jeff

Hi Jeff,
I'm beginning to develop a strong dislike for this forum's new interface!!
But that's not your fault.
The tables below use a VLOOKUP formula to retrieve the prices from the Current Pricing, and an IF statement in E1 to determine which column the prices are fetched from.
The added column isn't necessary; it was just simpler t do that than to go through the hassle of re-merging the single cell in Row 1. With a change of the cell reference in the VLOOKUP formula, the first formula can be placed anywhere convenient.
In E1:
=IF(LEFT(A1,1)="I",2,3)
The result of this formula tells VLOOKUP to return the results from column 2 or 3 of the Current Pricing table, depending on the first letter of the text in A1 being an "I".
In C3 and Filled Down:
=IF(B>0,VLOOKUP(A,Current Pricing :: $A:$C,$E$1,FALSE),"")
IF is used to return a null string unless there is a value greater than zero in column B.
Looks for the item listed in Column A and returns the value from the row where that item is found and the column specified in E1.
The error triangle in C9 is a "VLOOKUP cannot find.." error cause by the value '3” screws (25lb box)' not being found in column A of Current Pricing.
The error triangle in D9 is "There is an error in C9".
Regard,
Barry
PS: The line at the beginning?
I had complete all but the last line of a previous version of this post, and was deleting the '3" screws..." bit which had pasted as a single cell unnamed table, when the software bumped me back to the previous thread in this community. Not the first time this has happened, and in this case, as in the ones before, there appeared to be no route back to my partly completed message. So it was start over time. (/rant)
B

How to change the cell value in Excel Sheet in WD Java?

HI,
I have an application which is used to upload and download excel sheet.I can upload the excel sheet through Upload UI element and also able to download the same file through Download UI.But before download I want to validate the excel sheet.If data is not proper in the excel then I have to put some comment (cell comment).I am able to read each cell value,but not ble to put any comment.Once I pt commen in the cell,the download file should display the commented in the excel sheet.
Please let me know how to update hte excel sheet.
Sandip

hi Sandeep,
I'm not sure about the HSSF apis, however, i inserted the Cell Comments using jexcel apis. There is a method setComment(java.lang.String s, double width, double height) in class WritableCellFeatures using which you can insert cell comments
For more details refer [link|http://jexcelapi.sourceforge.net/resources/javadocs/current/docs/jxl/write/WritableCellFeatures.html]
Abhinav

Logged changes infotype data

Hi Experts,
I have configure the Logged infotype tables(V_T585A/B/C) and getting the output.
My requirement is to display the additional column for subtype text.
After running the report RPUAUD00 we get the Logged changes in Infotype data and if we click on particular row in the output we will get complete details. Then the first column is Subtype.
Can we get Subtype text to display(in another column)??
Is that possible?
Thanks in advance,
Points will be rewarded.
Regards
Prasad.

Hi Praneeth,
Thank you for the reply.
No, Even before doing the changes i had this problem. I will check the same with ABAPER once again.
Do we have to configure(V_T585A/B/C) Actions differently compared with other infotypes
Thanks in Advance.
Regards,
Prasad

RPUAUD00: Logged changes in Infotype data

Hi All,
I am trying to execute RPUAUD00 and the data is not fetched into the report.
any suggestions.

Hi Experts,
As per Ketul reply, it is not possible to get the log changes before enabling the V_T585A/B/C.
How can I convey the same to the client do I get any document on this for my reference.
OR
If any body can give me a detail Explanation on why the LOG is not generated before enabling the V_T585A/B/C.
Thanks in Advance.
Regards,
Prasad

Logged Changes in Infotype Data (Report RPUAUD00) DONT WORK!!

This report is used to display all changes that were made using infotype change documents, but sometimes it doesnt works correctly.
For example, if I do hiring action, and execute report rpuaud00, I can see :
00103266 A 0000   26.10.2007 08:59:56 0001 7RODRIGU
00103266 A 0002   26.10.2007 09:00:19 0001 7RODRIGU
00103266 A 0001   26.10.2007 09:00:41 0001 7RODRIGU
00103266 A 0032   26.10.2007 09:00:47 0001 7RODRIGU
00103266 A 0105   26.10.2007 09:00:54 0001 7RODRIGU
00103266 A 0007   26.10.2007 09:01:02 0001 7RODRIGU
after that, I modify infotype 0002 , but rpuaud00 shows :
00103266 A 0000   26.10.2007 08:59:56 0001 7RODRIGU
00103266 A 0002   26.10.2007 09:00:19 0001 7RODRIGU
00103266 A 0001   26.10.2007 09:00:41 0001 7RODRIGU
00103266 A 0032   26.10.2007 09:00:47 0001 7RODRIGU
00103266 A 0105   26.10.2007 09:00:54 0001 7RODRIGU
00103266 A 0007   26.10.2007 09:01:02 0001 7RODRIGU
It is the same data. it doesnt work correctly....
I try work with HR_INFOTYPE_LOG_GET_LIST and HR_INFOTYPE_LOG_GET_DETAIL, but i cant see all changes that I have done in every infoytypes. is this a SAP bug?
How can I solve this problem?

Hi Experts,
As per Ketul reply, it is not possible to get the log changes before enabling the V_T585A/B/C.
How can I convey the same to the client do I get any document on this for my reference.
OR
If any body can give me a detail Explanation on why the LOG is not generated before enabling the V_T585A/B/C.
Thanks in Advance.
Regards,
Prasad

Logging Changes in Org Man Infotype Data

Hi,
We currently use Auditing to log changes to PA infotypes but would also find this function useful on OM infotypes (eg IT1001, IT1018 etc). It's possible to see who changed it last using the 'Change Information' icon, but we would like to be able to see the before and after picture where someone has edited a record and overwritten the original data.
Does anyone know if this is possible? V_T585A doesn't allow selection of OM infotypes for logging.
Thanks
Emma

How about RHRHAZ00 for org management audit trail?
You can set up which infotypes you want to audit in T77CDOC_CUST
Edited by: Harish T K on Dec 23, 2010 10:06 AM

Logging changes in any table

Hi,
Is it possible to track changes in a schema by writing own code? What i want to achieve is to write something that will 'catch' any insert or update to any table in my schema and writes a log to my table.
Thank you very much
lubos

Here is what SAP says as a F1 help on the logging flag in technical setting of a table..
Log data changes
The logging flag defines whether changes to the data records of a table should be logged. If logging is activated, every change (with UPDATE, DELETE) to an existing data record by a user or an application program is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table. First of all, a record must be written in the log table for each change. Secondly, many users access this log table in parallel. This could cause lock situations even though the users are working with different application tables.
Dependencies
Logging only takes place if parameter rec/client in the system profile is set correctly. Setting the flag on its own does not cause the table changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3).

Is it possible to mass change desktop wall paper for all users using WGM?

is it possible to mass change desktop wall paper for all users using WGM?

yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

Logging change in a specific field in a sap table

Hi,
i would know if it's possible to log the change only one a field in a table like AUFK.
I create a new field and i want to know who and when a change is make.
Thanks a lot.
Edited by: draconagi on Mar 9, 2011 3:14 PM
Edited by: draconagi on Mar 9, 2011 3:14 PM

Hello Lalitha,
Guess FM DYNP VALUES READ can help you. You can append all screen elements' name onto the table DYNPFIELDS. When you use this FM, it will give new values of all the fields.
Note: This FM Read screen field values before PAI field transport.
Regards,
Anubhab

How iCal to log changes?

Hello
We use iCal to manage different events with different calendars. About 8 People create and change the events.
Sometimes events are deleted or changed by mistake.
Is there a possibility to log the changes?
Thanks for answers...

Hi there,
I'm trying to implement that same method, although I have more than 16 fields in the InfoCube that I need to track, and I can't use more than 16 fields as a key of the DSO.
How did you do that? Or you have less than 16 fields in your InfoCube?
Regards,
Diogo.

Is it possible to log out game center from all devices ?

Someone else can access the game I am playing that is called Clash Of Clans. I have been trying to find a logical answer on how that person can still have access to my game even after I change my Apple password. The explanation I came out with is that, the person who is playing the game somehow had an access to my Game Center account and as a result he can play the game just like me. Moreover, I discovered that even if you change your Apple-ID password which is your Game Center username and password at the same time, Game Center doesn't ask for the new password. Which makes the "player'' of my Game Center account still access able to my game.
I still don't know how he accessed on my Game Center account first place, but I need to find a way to log him off so that if he gets disconnected, he won't have access to my Game Center ever again.
Is it possible to log-off all devices that is connected to Game Center?
OR
Is there any way to fix my current situation?

You should find this Zevoneer post useful:
http://discussions.apple.com/message.jspa?messageID=9990366#9990366

Log changes of Serial number change in sales order

Hello Experts,
The change documents does not log changes to serial number for an item.
So far i found that there is standard change document object for sales order i.e. VERKBELEG
Is there a way to add new table to existing object.
Or how can i achieve this.
Best Regards
Rajat

Hello Adriano
Not fully sure about your requirement.
But you can definitely assign Serial numbers to sales order items by selecting the item and choosing menu path Extras/Technical objects.
Firstly you have to set up the Serial Number Profile ( T Code OIS2) or use the standard delivered ones GG00/GG01. Both have the Serialization Procedure SDAU - Serial numbers in SD order and in case of GG00, the serial numbers are assigned automatically. I am not sure how automatic assignment works but you can test it. Of course, you need to specify the Profile in the material master to use the functionality.
Hope this helps.

Table for the report RPUAUD00 Logged Changes in Infotype data

Hi
I have a query with the program RPUAUD00 Logged changes in Infotype Data. In which table stores the details of the program RPUAUD00. for example in the 1st period there is a LWP record for the employee. If in the 2nd period the LWP entered in 1st period has deleted, in the log the LWP displays for 1st period new field contents, Action Indicator I. The deleted information displayes in Old field contents with the Action Indicator D. We want to know in which table the LWP insert and LWP delete (d) details are stored.
This information required to create a report for ESI. In the report No of days (payroll processed for) has to mention. To know the no of days need to access the report RPUAUD00. From the RPUAUD00 the details of LWP insert and delete can be known.
Request to help in solving the issue
Thanks & Regards
EKP Yadav

Hello:
Logged changes in Infotype Data are stored in cluster table PCL4 ID LA and SA for employee and LB and SB for applicant. Maybe L is for longterm and S for shorterm
Cheers.
Antoine

Log change documents in EKPO

Hi Experts,
I wish to thank anybody replying this message first.
I have some questions to be cleared, may be you can provide me some help.
To log changes on specific fiekds from a custom table, one has to use SCDO to generate change object and fct modules.
These fct modules shoudl be called from program to log changes in tables CHDR and CDPOS.
In the process of modifying a PO (me22n), I have several additional custom fields added in SAP table EKPO. These fields are available in PO trhough a custom tab on PO screen. I want to log the changes on these custom fields. The data elements of these fields are checked within change document check box. I modify the PO on several fields including custom fields , examine the content of CHDR and CDPOS and then find out that changes are logged for SAP EKPO fields modified but not for the EKPO custom fields.
So here is my question:
Do I have to call the generated changed document fct modules from an user exit or BADI prior to saving to have the log changes or SAP handle it automatically ? If Yes, then which user exit or BAdi should I use ?
Thank you for your time
Dean Q.

I found that SAP log the changes aumatically
Thank u all

PMS - Is it possible to log changes in cell values/comments in appraisal?

Similar Messages

Maybe you are looking for