.png transparency- problem with underlying layer control

I have an opaque orange rectangle with a clear uneven square cut into it through which I am displaying a slideshow (Spry Image Slideshow) and it works fine except that I cannot control the slideshow with my cursor. I can control the slideshow fine when it is on top of the rectangle, but I want the cutout to act as a frame on top of the slideshow.
Is the transparency in the .png akin to a sheet of glass? If so can I access the controller somehow through the "glass" with some added code?

Hi
You cannot place a 'layer' over the slideshow, as this 'layer', (Is this an ap div?) will then 'have focus' above the slideshow and anything underneath this, (the slideshow controls) will not be selectable.
You could program your own event handlers in javascript to control the slideshow, but this will require you to have a reasonable understanding of javascript programming.
PZ

Similar Messages

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problem with Creative Audio Control Panel

) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

Problems with the items (control) in forms 9i (Re)

Hello,
I write this problem in a other post and but don't have any feedback about it(So I will give another try:-) )
The problem that I will describe don't happen all the time and is very rare but I want to know if it's a normal bug of forms or something more special of our PL/SQL code...
So here we are.
Is there others developpers here that have problems with the mouse cursor of the user that seems to be "jammed"(blocked, trapped) in a text item (or another control, like a list item). When this problems happen, the user can't go on another field of the forms with his mouse cursor(Mouse click), the only thing that can resolve that is to refresh the page with Internet Explorer, and after that, he is free to go on another field of the forms.
This problem is very rare but happens sometimes.
Thanx in advance!

Hi,
This problem is due to failuer of navigation of mouse cursore. For more specific solution can you give the error message and error code, So that we can have exact picture. Waiting for error code......

Player compatibility problem with dual layer media

I've created a dual layer DVD and there is a problem with compatibility from player to player.
It plays fine in one of my DVD players but will not load in the other.
The duplicators tested my master on 2 players and it loaded on both, but would lock up if a chapter was selected from the submenu.
It has 4 tracks of content. 3 menus, and a bunch of chapter markers. The original build had stories (replaced with standard chapter markers) but I removed them hoping it would solve the problem.
The imported video tracks were created with Compressor. MPEG-2 2 pass VBR max bit rate 7.5. AC3 audio tracks. 7.7 GB on disc.
I'm already way over my deadline and ahve no idea what to do next other than maybe recompress so the disc is not so close to being maxed out.

Thats just how compatible that media is... +R DL (double layer) & -R DL are not that compatible. Recordable media is less compatible that replicated discs but double and dual layer media can be 50% compatible at best (depending on your target market...)
Good quality media, Verbatim +R DL for example burnt at slow speeds helps improve things,
-Jake

Having problem with applying layer style "stroke" to group

- Windows 8.1 / 64bit
- i3-4150 / 4GB / Geforce GTX 750 TI
- Photoshop CC 2014
Hi!
I don't know why, but there is some problem that applying layer style "stroke" to group.
When i make a group with some layer and apply to group a layer style-stroke with inside option,
the strokes looks like grid are generated inside.
Why i said that stroke cross to ㅎrid, because it looks like grid if i make that group bigger.
(that black square is 'Rectangle 1' layer. Just resizing bigger than before)
Does anyone have same problem with me?
Please, I need your help..

pillfish wrote:
I am having the same problem. it happens every time in cc and cc 2014. I am back using cs6. Which seems to run better on the whole.
That's interesting. And this is happening with CC and CC 2014? Do you have all the updates for the Photoshop CC versions?
I've just tried to duplicate it without success, (windows 7, GTX570) so I wonder if there is a condition that triggers it? Unfortunately, with this being such an old thread, the only person still around is R Kelly.
OK, I just thought to try it on my Cintiq Companion 2, which has Windows 8.1 and Intel 5100, and the bug occurred. I actually got as far as firing up my Win 8.1 laptop before remembering that I had to sign out of CC to put it on my Cintiq, so I only have CS6 on it.
Anyway.... looks like the bug is still there. Are you using Win 8.1?

Problem with BMM layer warning messages.

Hi,
I have modelled with the following tables in BMM layer.
Dimension tables: Regions,Countries,Departments, locations, Employees, jobs, job history
Fact table: HR Facts (measured columns like salary, max salary, min salary, commission)
The model is consistent with the following warnings:
Logical dimension table REGIONS has a source REGIONS that does not join to any fact source.
Logical dimension table DEPARTMENTS has a source DEPARTMENTS that does not join to any fact source.
Logical dimension table COUNTRIES has a source COUNTRIES that does not join to any fact source.
Logical dimension table LOCATIONS has a source LOCATIONS that does not join to any fact source.
and also in the answers section (Presentation services) i could not able to view data, it's giving the following error (when i am trying to display REGION NAME field values)
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: REGIONS.REGION_NAME. Please fix the metadata consistency warnings. (HY000).
I could not able to trace the problem where exactly is to be fixed.
regards
chandra kanth.

Hi,
Thanks for the information. Ideally that works out without any hierarchies. But the problem with which i was facing is somewhat different.
Let me explain the problem scenario exactly:
I have an employee, region tables in physical layer. Employee table has SALARY Column. Region table dont have any
join with Employee table. In BMM layer i have created a fact table "HR Facts" and crated a logical fact column SALARY.
The logical fact table source is Employee table. I have drag dropped Region table into BMM layer and joined with HR
Facts table. While consistency check its given a warining message: Logical dimension table REGIONS has a source
REGIONS that does not join to any fact source.
What is the problem exaclty?
regards
chandra kanth.

Problem with programmatically control histogram color

Hi,
I'm developing a function to display multiple channel histogram. But I can not programmatically control the color. I use XY graph to display, and there's no problem with other type of plots.
Attached is the example vi I use for the test. Please tell me if I make any mistakes.
Inhaler
Attachments:
histogram_colortest.vi ‏38 KB

instead of using plot.color, use the fill/point color.
-Joe

Problem with a Table Control Scroll Down.

Hi,
I´m working with a table control in which I select one of the many lines the table contains and I move it into a structure, I delete the data of the table control internal table and I move the selected line back into the internal table to show only that record. My problem is the following:
Whenever I have to scroll down to select a line, the selected line doesn´t appear afterwards. I believe that it´s because the scroll bar disappears and keeps on showing the line where the record I selected used to be and because the selected record is added in the fist line of the TC.
Is there any way of avoiding the disappearrance of the vertical scroll bar? Or how can I show the record added in the first line if the TC only displays the position where the selected record used to be?
This is the logic I use to show the single record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
Thank´s and regards.
Lucila

Well, I´m going to anwser my own question. The problem was that in my TC the top field value was the line number of the record I've selected. So the only thing I had to do to fix it was to asign 1 to the field TC-top_line inside the form where I select the record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
    W_INI = 1.
ELSE.
    MESSAGE I889(100) WITH TEXT-T07.
    EXIT.
ENDIF.
z_result-top_line = 1.
(z_result is my TC )
Best regards,
Lucila

Problem with SAP Script (Control Commands)

Dear friends,
I am facing one problem withg control commands. When i use PROTECT.....ENDPROTECT with VAR type window then it is not working instead i use with MAIN type window it is working fine. Another problem with BOX command when i use with MAIN type window then it is not working but when i use with VAR type window then it is working fine. SO i am little bit confused that is there any relation between control commands and window type?
THanks & Regards,
Bhavin

Hi,
There is no restriction to use any control commands on any windows.
The SAP doesnt give any error, but the point of using Protect Endprotect in windows other than main window doesnt apply.
Only main window carries from one page to another. So in order to print certain lines in a single page we use this control command.
Regarding BOX command it works fine on any window.
Thanks and Regards.
Lavanya.

MSI P55-GD65 - Problem with automatic fan control.

Hello.
I wish to share story of my fan speed controller.
Lately I've upgraded my machine to modern specs (look at signature) and I was quite happy about that.
It worked flawlessly for about week.
My H/W Bios settings was - CPU Smart Fan Target = 60°C and minimal fan speed 50%.
I was amazed how nicely GD65 maintained between heat and speed.
Yesterday, I've noticed that my fan is really quiet all the time, even when gaming (before it accelerate speed while hardcore gaming settings). I was quite content about that, until my computer crashed due to overheating while playing Battleforge match.
After reboot I've ran Intel BurnTest and HWmonitor. OH my, what was my surprise when I saw that fan speed is always 50% and do not speeds up when cores are heating up!
I started to checking things out. What I've discovered:
-(CPU Smart Fan ON) Fan is always at minimal speed given in BIOS. It doesn't accelerate even if CPU is burning.
-(CPU Smart Fan ON) Fan speed cannot be controlled by any program (like SpeedFan).
-(CPU Smart Fan OFF = 100% fan speed) Fan speed CAN be controlled by program like SpeedFan, which saves me from fan buzzing.
I've try to fix that by:
-Checking cables.
-Clearing CMOS.
-Updating BIOS to 1.6.
-Praying.
And still nothing.
My conclusion:
Fan speed cannot be change when Smart Fan is on, it locks fan speed at minimal speed given in bios.
Now I just hoping that this is somehow stock fan fault, new Zalman CNPS 10X QUIET is in delivery.

No problem here with Target 55° and Speed 37.5%.
Fan runs at 1330 below 58° and 2050 above which is max.
The CPU is running at 3050 MHz because of XMP 'overclocking'
Have reverted to BIOS version 1.3, due to XMP problems with other versions.

Transparency problems with Dashboard Widgets

I installed Leopard on my MacBook and everything has been working well with the exception of some funkiness with my Dashboard widgets. There are a few widgets that the white text on them has changed from solid white test to transparent text with a white outline. I've got a screen shot here:
Has anyone else run into this problem? Is there a way to fix this problem? Any thoughts on this would be greatly appreciated.
Thanks!
--Tim--

Someone pointed out something that fixed it. There was a font name conflict that was bringing up an incorrect style of Helvetica Neue.

Blending edges of image with underlying layer

I want to paste an image into a another image. (like adding a person from one photo to another photo) However, when I paste the image into a layer on top of the destination image, the edges of the top layer are sharp and obvious.
Is there a way to softly blend just the edges of a top layer with the layer below so that it is less obvious that a Paste has occurred?

Welcome to the forum.
For this, I add a Layer Mask to the overlying image. That Layer Mask will then be worked on to soften the edges.
Depending on your exact overlying image, it might be constructed from Selection>Load Selection>Layer 2 (or whatever) Transparency, then hitting Q (QuickMask) and either Painting in the edges, or just running a Gaussian Blur to that QuickMask. The choice of exact method(s) will be dictated by that overlying image and what it consists of.
Good luck,
Hunt

.png transparency- problem with underlying layer control

Similar Messages

Maybe you are looking for