PO Header Text Types

Hi everyone,
we've maintained the set of text header types to use for Purchase Orders in SPRO.
The view that's behind the customizing is V_TTXID_MM_UPD, which is a join of TTXID and TTXIT.
The thing is that we want to retrieve the list of the text header types that we defined in SPRO at runtime (in ABAP) but we don't know where this list is maintained.
I can see the entries in TTXID and TTXIT but those are too many for us. We just defined a subset of them.
What table is the customizing stored into?
Thank you!

Hi,
The text object of the purchasing document header is EKKO. Therefore you can just check the table TTXID for this text object. Unfortunately, "purchasing documents" are not only PO's. Therefore you will have to limit your selection to text ID's starting with "F". This is the purchasing document category of the PO (seen e.g. in the PO header EKKO-BSTYP).
BR
Raf

Similar Messages

  • Authorization at sales document header text type

    Hi All,
    Is it possible to have authority check at the sales document header text type ?
    My basic requirement is to gray few text types at sales document header level in t-codes VA01 and VA02.
    Appreciate your response.
    Thanks,
    Nagaraju

    Hi raj,
       U can configure Text Determination in T.code: <b>VOTXN</b>
    it follows the condition technique
    1. Define Condition Table
    2. Define Access Sequence
    3. Define Text Types
    4. Define Text procedure
    5. Activate to sales document types
    there u can achieve ur purpose.
    Reward if it helps.
    Regards,
    Anbu

  • Text is not copying into Header Text Type from Contract to Order & Invoice

    Salute Masters!!
    I have done related configuration in VOTXN for Sales Document & Billing.
    After creation of Contract, given Text in New Header Text Type, itu2019s not copying into Sales Order or Invoice.
    Although, which was configured earlier one, for that Header Text Type, text is copying into Order & Invoice both properly.
    Firstly; I have given the same Access Sequence for the New Header Text Type, It was copying the same matter which was given into Old Header Text Type, then I have created new Access Sequence & assigned changed Access Sequence for the New Header Text Type, even then it is not copying.
    I have checked other Configuration those are OK!
    Assignment of Sales Document Type to Text Determination Procedure, it is OK!
    Please provide the solution.
    Thanks in advance.
    Warm Regards,
    Sanjai Srivastav

    Hi
    Hope the issue is resolved , if not please check these settings - VOTXN
    1. Create Text Type for your Sales order -S001 and Billing Invoice - B001
    2. Create Access Sequence - Z001.
    3. Include your Both Text Type in respective Procedures.
    Now
    WHen you will assign the Text into your Text Procedure - Assign same Access Sequence in both the case.
    In your Sales Order text procedure - Assign
    1. Assign Text Type S001  and Access Seq Z001
    2. Select the Access Seq on the left side in the VOTXN T-Code , a POP up will come and then input Your Access Seq into that
    3. You will get another screen, Here give the Seq No-1 and VBBK Header Text and Again Assign TEXT type S001.
    Now go to Invoice Text Procedure
    1. Assign Text Type B001 and Access Seq Z001 and SAVE.
    Once you will do that the step 2 and 3 will automatically get copy in the backend.
    To Check
    2. Select Access Seq on left side and in the Pop Up input access Seq. Now there you will see the system has copied the
    fields from the Order.
    Now try running the scenario. same you can do for Contract and Order.
    Hopefully this will Help you.
    please let me know if any concerns
    Thanks
    RB

  • How to restrict header text changes in sales order level

    Dear Experts,
    how to restrict header text changes in sales order level change mode
    thanks

    Hello Chandu,
    how to restrict header text changes in sales order level change mode
    In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
    Please try out this approach and let us know your latest observation on this issue.
    Regards,
    Sarthak

  • NEW HEADER TEXT IN PO

    Dear Gurus,
    How to create OR Copy new header text type in PO.
    Actually i needed 3 or more new Header text type in PO.
    Please suggest
    Thanks

    Hi
    Follow the following IMG path to configure the new text types & define the copy rules:
    IMG - MAterials Management - Purchasing - Purchase Order - Define text types
    Under this you will have option for Header text & also for Item text types.
    Regards
    Prasad

  • Header text in contract not transferring to PO

    Hi,
    I am creating a PO referencing a contract. I maintained header note in contract. Now, when I am creating a PO referencing to the contract the header note in not transferring to the PO.  The F1 help in header note in contract shows if it will not be selected it will not be processed. When I selected and tried to save it the system shows no data changed.
    Is there any configuration setting for this.
    Need your help.
    Thanks

    Hi Gaurav,
    Header Text  should certainly copy from Contract to PO just make sure these settings are available in system.
    Go to OLME -> Purchase Order ->Texts for PO -> Define copying rules for header texts
                 It will show you several header text types
    Select the text id go to text linkage here Source Object contract should be there (with Fix indicator blank or *)
    if not then maintain the same and test again

  • Header text in Document type RE

    Hi ,
    I have activated the Header text in Docuemnt type 'RE' , While posting the MIRO , I am entering header text , still system not allowing to post the document  ( below error message)
    For document type RE, an entry is required in field Doc. Hdr Text
    Please help.

    Hi,
    Could you check if you have implemented BADI AC_DOCUMENT in your system?
    If BADI AC_DOCUMENT is activated then in both methods CHANGE_INITIAL
    and CHANGE_AFTER_CHECK of badi, following code line must be present.
    MOVE-CORRESPONDING im_document-header to ex_document-header.
    Regards,
    Ashwini.

  • How to change the header text on output type in sapscript

    Dear All,
    In the sapscript, I would like to changes the header text from invoice number to sales number on the output type z001.
    Could someone can guide me?
    Thanks.

    Hi,
    Please go through following link :
    http://forums.adobe.com/thread/870081#870081
    Thanks and Regards,
    Vibhuti Gosavi | [email protected] | www.infocepts.com

  • How to maintain PO Header Text entry in table T166K for different PO Type

    Hi,
    Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
    Thanks
    Shrikant

    Spro->Material Management->Purchasing->Purchase Order->Texts for Purchase Orders.
    There are 4 config setting to do for this.
    Read information text.
    regards,nishant
    please reward if this helps

  • How to maintain PO Header Text entry in table T166K for different PO Types

    Hi,
    Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
    Thanks
    Shrikant

    Resolved.

  • Text type on Confirmation header

    Hi! Does anyone know whether it is possible to configure the text type on the Confirmation Header, under Documents?
    Basically, we have turned on confirmation approval and if we reject a confirmation, we will be given a choice to enter the rejection reason code and some texts. I noticed that there are 2 text types - Internal Note and Rejection Notification. Ideally, it makes more sense to Rejection Notification. However, this is not the default text type on the screen and to make it more user friendly, we are hoping that we can change the default text type to Rejection Notification.
    Appreciate any advice on the above.
    Cheers!
    Siow Fong

    Hi,
    You can change the description for the STandard Text in SPRO.
    SPRO>SUPPLIER RELATIONSHIP MANAGEMENT>CROSS APPLICATION SETTINGS-->TEXT SCHEMA
    BR,
    Disha.
    Pls reward points for useful answers

  • Passing header text into Idoc(Idoc type orders05)

    Hi,
      we have header text, header note etc in text tab(under details) in  PO.
           now i have to pass the data's from the header text into the IDoc(idoc type Orders05),
    In which segment the data's will be populated, How to shall i go.

    Hi,
    if you are using idoc PORDCR102 or PORDCR101, header texts are populated in E1BPMEPOTEXTHEADER and both position & header in E1BPMEPOTEXT.
    Then you are using ORDERS01-05 Idoc types, header texts were filled in E1EDKT1 & E1EDKT2 while texts are filled in E1EDPT1 & E1EDPT2.
    The PO header texts are stored in the segments E1EDKT1 whose child segment is E1EDKT2 in IDoc type ORDERS05.
    The actual text will be found in E1EDKT2 and the text id will be found in E1EDKT1.
    You have to do some config so that The segment gets update
    in the IDoc.
    go to SPRO  MM->Purchasing ->messages->Text for messages->Define texts for PO. Here you can find out on the left side of the window.In  Header texts & supplements text.
    Add the text IDF01( with all  details like your document type, object for PO will be EKKO) in header text .
    Then Add all other to the supplement texts(details).
    It is now the IDoc should update the segments.
    Regards
    Raj.
    Moderator message:
    Warning. Reason: plagiarism, this is a copy-paste answer from:
    PO texts in purchase order idoc*
    Edited by: Csaba Szommer on Nov 8, 2011 2:00 PM

  • Define new text type in PR header like in PO header

    Hi,
         I can define text type in PR item and in PO header, but I can't find the path to difine text type of PR header,why?
         And I heared there is a T-code or program can do this, neither by user exit or enhance, Who can tell me how to do?
         Thanks a lot!
    Benjamin

    Dear,
    Dear,
    Cannot tell How it done. But answer is YES you can add.
    Try these User exits and BADI with help of ABAPer..
    User exit
    MEREQ001 Customers' Own Data in Purchase Requisition
    Business Add-in
    ME_COMMITMNT_PARKING BAdI for Redefining Commitment Interface When Parking
    ME_MEREQ_PARKING BAdI Purchase Requisition: "Hold"
    ME_REQ_HEADER_TEXT Copy Header Text: Enjoy Purchase Requisition
    And here you can add at item details levels: SPRO->Purchasing>Purchasing Requisition>Text for Purchase Requisition-->Define Text Types
    Also you can find it at: http://forums.sdn.sap.com/thread.jspa?threadID=1878976
    Regards,
    Syed Hussain.

  • How to disable numbers in a text type or field ?

    Hi,
    Any option of disabling numbers in a text type or field ? For E.G. in the PO header text can we prevent users from entering number or values ?
    Thanks.

    No, not without own programming

  • Copy of header text

    Hi SAP Gurus,
    Is there any SAP std. possibility, If I entered the text in the Credit memo heder and which get copied into the output of the Invoice list(Credit memo list).
    If yes then please let me know how to configure.
    Thanks & Regards,
    Sachin

    Hi Sachin,
    To map your requirement you have to ask your Abaper to pick up the Text entered in the Header Text field by using Function module "READ_TEXT" (T-code - SE37).
    Firstly go to the Billing document> Header> Text and press the Display log icon available at the bottom where you have entered your Text. It will give you details like ID and Object name against the Text Type where you have entered your text.      
    Then Use T-code - SE37 then select "READ_TEXT" function module and Execute. System will ask you to enter your client code, ID, Language and the Billing document no. along with the Object Name and then execute. System will display the RESULT at the bottom. Ask your ABAPer to pick this data and use the same on Invoice.
    Hope the above meets your requirement.
    REWARD if it helps you!!
    Regards,
    Ajinkya

Maybe you are looking for

  • RIM ripping off everyone outside of US (pretty much)

    I am a ridiculously loyal Blackberry user. For a short while (two weeks) I defected to the iPhone, but quickly realized it was mistake and came straight back. I did buy an iPad when they came out, but I actually prefer my Playbook so the iPad is gath

  • Error messages in JDeveloper applications

    Hi, I'm an JDeveloper newcomer and I have following problem: if in my JDeveloper application oracle.jbo exceptions are thrown the error text is displayed in english. How can I get the error text in another language(for example german)?

  • Ipod doesn't get recognised in Itunes

    Got me a new Ipod nano 8GB I installed new version of itunes and updated all software on pc... Now my Ipod automaticly makes itself a J: drive which used to be the one of my external drive... In any case, my ipod appears in itunes but I can;t put mus

  • How can I avoid having to save edited photos to desktop?

    I use iPhoto '09 for organizing my photos and Photoshop Elements 6 for Mac for editing my photos, most of which are JPEGs. My procedure is to make a duplicate of the photo I wish to edit and then hand it off to PSE 6 for editing via the Edit in Exter

  • How do you disconnect internet from phone

    I have just bought an Palm 750 to replace the one I dropped and the previous owner had internet and email and used it regularly.  I do not have a data package and don't want the phone to continue searching for the service.  My battery used to last 3