PO output messages control based on the reason code

HI,
The requirement is to generate the PO output message based on the value of 'Reason for change' code. suppose
Ex:generate the output if the reason code is 2.
I know there is a way to control the message output by defining the 'fields relevant to printout of changes' in SPRO. But we are not going to use this option.
I have to control the output based on the Reason code. Please let me know.
Regards,
Nishant

Hi Nishant,
I will give you another input. This should be your last option. As mentioned above, you need to create an implicit enhancement in the following class method and export the content of the internal table MY_TABLE which contains the current values of the versions.
Class - CL_GRID_VIEW_MM , Method - HANDLE_ON_DATA_CHANGED
Then you import the same in your exit.
Regards,
Abijith

Similar Messages

Can we change the partner number based on the reason in CIC0 in CRM ?

Dear Experts,
Can we change the responsible partner number based on the reason in CIC0 in CRM ?
regards,
Abhijit G. Borkar
Edited by: Abhijit Borkar on Jul 10, 2009 6:46 AM
Can it be done by using 'Actions' ?

Hi Abhijit,
Yes you can do this a number of ways:
action
badi - partner or order
event - custom function module
Remember that the partner determination must allow for this partner to be changed.
Cheers
Andrew

Getting a lot of this error:The reason code is '4(802.1X Authentication failed 3 times.)'. - Controller Name:

Since we upgraded our WCS system to V6.0.196.0 we are receiving a lot of the following error messages and I haven't figured out why.
Client 'c0:cb:38:3f:a1:0d (anonymous, 0.0.0.0)' which was associated with interface '802.11a/n' of AP 'ACAA01-00.P04-G2C2.1' is excluded. The reason code is '4(802.1X Authentication failed 3 times.)'. - Controller Name: 205-dg20-bb3-4/2

Check you ACS (Radius) logs under failures. You will see why its failing. Sounds like a AD account went bad
or someone is entering the wrong logon ... But check your radius log it will point you in the right direction.

Can we change the reason code?

Hey Guys,
Is it possible to change the reason code after the document is posted? i need the reason code field to be editable. I checked in the document change control rules and it doesnt let me enter reason code.
Is there a way to change the reason code? or not?
Thanks,
Zaid Azam

you cannot change the reason code once the document have been posted.

To limit the access of PM data based on the Company Code, Plant & Location

Hi Experts,
         I have a requirement . Customer wants to Restrict the access of PM data for a user based on the company code,
Plant & Location.
Say user : XYZ
Plant :1000
CCODE:1000
Location:0001
So you can see data of only this Organisation structure .No other data will be visible to him.
I know we can do it using authorisation object
Can you Suggest me how can we do this.
Regards,
Amar

Hi,
You can achieve this by maitaing these values in user authrisations. If you want more info about the objects check SU22 t code under PM.
For Plant              I_IWERK
For Location       I_ILOA
Regards,
N.Nagaraju

F-44 Vendor Clearing: Not able to save the reason code

Hello Experts,
We are testing t-code F-44. We are attempting to perform a vendor clearing with a Debit Balance Write-off. As part of the test we require to add a Reason Code to the transaction posting. Unfortunately, the reason code is not being saved to the FI transaction being generated.
I will be glad to provide further information if needed, also points will be rewarded as soon as suitable answer is received.
Thanks,

Hello Experts,
We are testing t-code F-44. We are attempting to perform a vendor clearing with a Debit Balance Write-off. As part of the test we require to add a Reason Code to the transaction posting. Unfortunately, the reason code is not being saved to the FI transaction being generated.
I will be glad to provide further information if needed, also points will be rewarded as soon as suitable answer is received.
Thanks,

Where to configure the reason code for payment differene

Dear Experts,
I did the settings in obxl with reason code option and changed the screen layout for the postings keys for payment difference as mandatory. while doing the account assignment in obxl system asking the reason code for payment difference. Where to configure the reason code any t.code is there, please guide me.
J.francis

Just Go SPRO>IMG>Financial Accounting (New) >Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Manual Outgoing Payments > Overpayment/Underpayment > Define Reason Codes (Manual Outgoing Payments)
There you have to create Reason Code
Now go SPRO>IMG>Financial Accounting (New) >Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Manual Outgoing Payments > Overpayment/Underpayment >Define Accounts for Payment Differences (Manual Outgoing Payment)
Here assign GL
Best Of Luck
Tanmoy

How can I fix my mac mini g4 1.5ghz which gets the must reboot message? what is the reason?

How can I fix my mac mini g4 1.5ghz with 2gig ram which gets the must reboot message randomlly? what is the reason? Hard disk has no errors.

Based on your description, you are having a kernel panic.
Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Adding Multiple files to many Sharepoint Sites based on the Sites Code (Splitting the data using a code)

Hi,
I'm pretty new to Sharepoint and wanted to ask a question to see if it can actually do what we need it to do.
We would have a top Site within a collection and under this we would have 400 sites for different sections of the business (External) Lots of teams create documents for all these sites and use the Code of the site in each document so we know what business
site its going to. For example 67890_BusinessReportMay.docx We know this document should be heading to site 67890
We have lots of services sending data to these 400 business sites. If we were to do them manually it would take most of our time to go to each site and upload the documents, even if we could do all the sites documents in 1 multiple upload. We still have
to go to each site to do it
Is there an easy answer to this? At present I have folders to match each of the 400 Sharepoint Sites and I use an Integration Services package to move all the documents into these 400 Matching folders. I do this using the Code at the start of each file name.
If it doesn't have a code its put into an error folder and reported back on.
Then I want something to automatically go through each of these folders and load them into the Sharepoint Sites document libraries.
OR
Say you have 600 files all going to the 500 sites on Sharepoint in one folder. The File contains meta data regarding the Sites Code. Using this you can split the files and automatically pull them across to the Sharepoint Sites without having to go
into each Sharepoint Site?
I'm thinking that you cant do this and I'm hoping I'm wrong. Any help would be greatly appreciated.
Debbie

Hi Debbie,
According to your description, my understanding is that you want to move the documents to different sites based on the code in the name of the files.
I recommend to create workflow and set the workflow to start when an item is created to achieve this goal.
As there is no built-in action which can move the documents cross site, we need to use the custom activity 'Copy List Item Extended' which need to be downloaded from
http://spdactivities.codeplex.com/.
Please per the steps in the link below to deploy the custom activity to SharePoint:
http://social.technet.microsoft.com/Forums/en-US/82609160-152f-461a-9a19-0e996f5a309b/sharepoint-2010-archiving-the-files-from-one-document-library-to-another-document-library-in
After that, we can create a workflow to meet the need.
Here is the detailed steps to create the workflow:
Create a column in single line of text type(called NO for example) in the library where the documents are uploaded, and input value manually in the column to store the code when uploading the documents. (We can also use workflow to extract the code from
the name of the documents if the codes are always 5 numbers.)
Create a workflow associated with the library and set the workflow to start when an item is created.
Select If current item field equals value, change the settings to be If Current Item: NO equals 67890.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at site 67890 URL.
Select Delete Item, change the settings to be Delete Item in Current Item.
Create other conditions from step 3 to step 5 to copy the documents to different sites and delete current documents.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Function module to change the reason code for status in a Opportunuity/lead

Hi,
What is the function module to change the opportunity reason. I was able to change the status using the crm_order_maintain but How can I change the reason for that opportunity.
Thanks
naveen

You can use CRM_ORDER_MAINTAIN and populate the parameter IT_SERVICE_OS
or use BAPI_OPPORTUNITY_CHANGEMULTI and populate the parameter SERVICE_OS.
BR,
Florin

Account code (gl_code_combinations) for tax based on the item code

I would like to have invoice created (ra_customer_trx_all rcta, ra_customer_trx_lines_all) with the account code (gl_code_combinations) for tax depends on the item code (one of the segment in mtl_system_items).
example: we have 5 segments in item code
item A: 01-01-AAA-0001-01
item B: 01-01-BBB-0002-01
and when we do auto invoice(for sales order), system will create
TAX account code for item A: xx.xx.xxxxx.xxxxx.101.xx (for item with 3rd segment=AAA)
TAX account code for item B: xx.xx.xxxxx.xxxxx.303.xx (for item with 3rd segment=BBB)
can anyone give me some guides to set this up?
thanks.

use autoaccounting

Output message form based on Vendor

Hello Gurus,
I have 2 SAPScript forms to output delivery schedule lines by fax or by email.
How can i make the system to select the correct output form based on vendor?
So far i am thinking to create a different message type and create a condition record by vendor and doc type. I will use the mostly used form in the default condition combination (Purchase Org/ DOc type) and then rarely used form in the (Vendor/Pur Org / DOc type) condition combination.
Do you guys think this is good way or is there any better way?
thanks!
Khan
Edited by: Owais Khan on Jan 20, 2010 4:18 PM

thanks for your reply.
I setup exclusive flag but system still doing both the outputs for the fax type. We have one for Purchase Org and Doc type condition and also the Purchase org, Vendor and doc type level, but prints out both fax types.
Email is working fine because we only have at vendor and pur org level.
thanks!
khan

A/R invoice control based on the advace payment %

Hi all,
Greetings!
One of our customer requires,
They should able to prepare A/R Invoice, when they got 90% of the Invoice amount as advance payment. Otherwise the user should not able to prepare the A/R Invoice.
Let me know please how this can be achieved in SAP B1.
Thanks & Regards,
Venkatesan G.

By Advanced Payment do you mean down payment invoice?
There was a similar question which I anwered. Please click on link below to view the same
How to track unpaid Down Payment Invoices Before creat the AR Invoice?
Suda

TS1424 Hi, earlier today I made a purchase of $109 in a game app that I'm playing. Shortly after (approx 10mins) I tried to make another purchase, I received the error message stating -2 as the reason. After a few more attempts, it gave me an error -1 mes

.

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

Creation of SC or POs based on the Company Code restriction

Dear All,
I am abaper and I am new to SRM. Ours is SRM 4.0 using Extended Classic Scenario
we got one requirement that one company ex: SE04 should be blocked for further ordering of SC and POs. i.e. when creating any SC or PO they dont want to use 'SE04'. If selected it should throw an error message "Company Code SE04 can't be used for Procurement".
I wrote code in BBP_DOC_CHECK_BADI-BBP_DOC_CHECK like this..
IF flt_val = 'BUS2121'. "When create SC
LOOP AT lt_item INTO ls_item WHERE be_co_code = 'SE04'
                                    AND del_ind <> 'X'.
    CLEAR ls_message.
    ls_message-msgty   = 'E'.
    ls_message-msgid   = 'BBP_PU'.
    ls_message-msgno   = '001'.
    ls_message-msgv1   = text-001.
    APPEND ls_message TO et_messages.
ENDLOOP.
endif.
and for po also BUS2201 we done the same.
it is working fine for creation of SC and POS, but when we are chaning old SC or POs for 'SE04' then also error is coming "Company Code SE04 can't be used for Procurement".
When I put break point in BBP_DOC_CHECK_BADI-BBP_DOC_CHECK it is not stopping there also.
Please guide me for this..
Thanks,
Kiran Madineni

I written code like this: now working for old SC and POs.
IF flt_val = 'BUS2121'. "When create SC
    IF cs_header-created_at >= '20110110000000'.
*if sy-title = 'Shop' and ( sy-tcode = 'BBPSC01' or sy-tcode = 'BBPSC02' or sy-tcode = 'BBPSC03' ).
      IF sy-tcode = 'BBPSC01' OR sy-tcode = 'BBPSC02' OR sy-tcode = 'BBPSC03'
        OR ( sy-tcode = 'BBPSC04' AND sy-title = 'Change Shopping Cart' ).
        LOOP AT lt_item INTO ls_item WHERE be_co_code = 'SE04'
                                          AND del_ind <> 'X'.
          CLEAR ls_message.
          ls_message-msgty   = 'E'.
          ls_message-msgid   = 'BBP_PU'.
          ls_message-msgno   = '001'.
          ls_message-msgv1   = text-001.
          APPEND ls_message TO et_messages.
        ENDLOOP.
      ENDIF.
    ENDIF.
ENDIF.
For POS BUS2201
Thanks
Kiran.

PO output messages control based on the reason code

Similar Messages

Maybe you are looking for