PO price field in PR

Hi folks!!
PO price field in valuation tab of PR is used for price adoption in PO, but this field is not visible in valuation tab page of PR.
Please let me know how to make this field available

HI ,
First You have to Check your Document type for which you want the Valuation price.
See the Valuation Price ,depends on the Doc type and the type of Item Category used
For Example if you are Using a Material ,it copies the Value and dispalys from THE Material Master accounting View Moving Average Price.
if it is a D --then services then it comes from the service master ,ot the price maitained against the service line item
if it is a B-- Limit case PO,it comes from the Limits Maintained.
If it is Consignment K -- then there would be only Quantity ,no value in this case.
If it is U, it is Stock transport Order.. where the Price would the master MAP.
so it is all the Effects the Valuation Price in PR.
if your Case comes in any of the above and till also it is not comming then ,it is a True case of Screen layout change made against the creation of a Variant in SHD0.
IN the T code For the T code ME51N
for the Program SAPLMEGUI --Screen Number 3320.
in this make the Valuation Price Feild might have made invisible.
so make it optional.
if it is also not the case then in the Standard Config setting of the t code only they have hidden the Feild
Please check against the T code SE80. --Program SAPLMEGUI --Screen Number 3320.
Hope so the above helps
Regads
Anjanna

Similar Messages

Can we edit Gross Price field in Sales Order

Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir Gandhi

Hi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon

PO - Service tab gross price field is in display mode

Dear all,
My client requires
Contract relase order with reference to Service contract, the price for the service codes which is adopted from the service contract, it is picking and displaying it contract release PO. But the gross price is in changeable mode. But i need the gross price field is in display mode. it should be in display mode while creating realse orders for contract.
Expecting your earlier response
Thanks in advance
Raman

Hi Raman,
If you follow the steps mentioned in the note 30316 you will be able to find why the price in the contract is in changeable mode...and then we will be able to change the price to display mode.
Note: 30316
1. In Transaction SE37, display function module MEX_FELDAUSWAHL and set
    a break point at the first statement.
2. Start the program where you suspect a problem with field selection.
    The program should stop at the break point set above. Copy the
    import fields I_AUSWAHL0, I_AUSWAHL1, I_AUSWAHL2, I_AUSWAHL3,
    I_AUSWAHL4, I_AUSWAHL5, and I_AUSWAHL6 to the list of field names.
    The corresponding field contents show the field selection reference
    keys that are composed as follows:
3. You can check the field selection reference keys found in
     Customizing. For purchase requisitions, the Transaction code is
     OMF2, for purchase orders it is OMF4, for contracts OMFA, for
     scheduling agreements OMF7, for requests for quotation it is OME8.
    Or
    Tcode: OLME  Contract  Define Screen Layout at Document Level
4. All keys from the AUSWAHLn fields are used to determine the field
     selection and their status. They are set according to the following
     matrix.
     See the matrix in the note
Alternatively, the following can be stated:
     o Field status 'Hidden' takes highest priority. This means that if
        a reference key has defined the field as 'Hidden', all other
        reference keys are overruled.
     o Then follow statuses 'Display', 'Mandatory', and finally
        'Optional'. Accordingly, a field is assigned the attribute
        'Optional' only if all reference keys for the field are set to
        'Optional'.
I hope this information helps you to resolve behaviour.
Best Regards,
Gabriela

Price field is not becoming invisible from the item overview of SRM quote

Hi All,
I am facing a very unique problem . I need make certain fields invisible in the SRM quotation . One of them is the price field at the item level.
I have used BBP_UI_CONTROL_BADI for the same. However the field is NOT becoming invisible from the item overview. It is becoming invisible from the item detail but NOT from the item overview.
Is it because the field is defined as display only in the code ?
I have implemented note 1062639. Other than this price field I am able to make all other fields invisible from the item overview.
Code :
IF iv_fieldname eq 'BBPS_BID_UI_ITEM-PRICE'.
cv_invisible = 'X'.
ENDIF.
IF iv_fieldname eq 'BBPS_BID_UI_ITEM-PRICE_UNIT'.
cv_invisible = 'X'.
ENDIF.
Does anyone have any suggestion as to how to solve the problem ?
Regards,
Ajali Sen

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Unit Price Field is in-active on a Purchase Order for a Normal User

Hi All,
One of my A/P user is unable to enter price on a Purchase Order as the PO Unit Price field is inactive. I have given this user full authorization on PO and activated the unit price field from form settings as well but as such nothing is happening. Can anybody tell me how to get it activated.
BR

+Naveed Jameel wrote:
<<Hi All,
One of my A/P user is unable to enter price on a Purchase Order as the PO Unit Price field is inactive. I have given this user full authorization on PO and activated the unit price field from form settings as well but as such nothing is happening. Can anybody tell me how to get it activated.>>+
Hello Naveed,
Have you given read only or full authorisation to the price list group associated with the price list used for your BOM?
KR
Murielle

Net price field should not be edited in PO, when created reff. to contract

Dear friends,
I have a requirement like this.....
User referring the contract in creating the purchase order, details of the contracts are copied in to the purchase order. the price field is in edit mode....
requirement is that user should not edit this field, the price carried from the contract should be not edit mode. this is to be hapen only when purchase order is created referrence of contract.
here we are using only the standard document type is used for creating Purchase orders with and without the referrence of contract.
Thanks in advance...
Shashidhar

What I did for a client was implementing enhancement (user exit) MM06E005 to perform checking during PO creation.
OSS note 310154 explains how to issue error messages from ME21N from the user exit.

ML81N Problem with price field.

Hello:
Im trying to enter a service through ML81N. When I enter the PO and complete the service number, the sevice line doesnt show the following fields:
Gross price field.
Current
per unit of meas.
why it happend?
The user can enter the service.
Thanks in advance for your help
Tomas

Hi,
No need to apologise, that is why we are here, you are certainly NOT asking for too much. You are being very helpfula and providing more detail as we need it.
We enjoy helping people to get the most out of SAP and so your question is a good one.
One thing that you can do in an SAP purchase order is to move the columns around. So firstly get the user to check to see if the required columns are there but perhaps they ahve to scroll to the right to see them.
Each user can save there own format for these columns and so this user may have saved different settings to yours.
So let me know if they have found the columns futher to the rioght of the screen and we can help you to get them to the left so that they are visible straight away (basically you click once on the column header and then click and hold the button down, you can then drag the columns left and right and let go when they are where you want them. The the user clicks on the icon in the right hand corner of the item "window" (it looks a bit like a spreadsheet) and then saves this as their default.
I would suggest that you play with this a bit first, it does take practice to get it right.
(also try clicking on the dividing line between the Qty and the next field in case the user has reduced the column width to zero (in the same way that you would do this in excel)
If this is not the problem then let us know and we can try other options.
It could be that the user has an EFB parameter in their userid that is preventing the display of pricing info.
Thanks for your thanks by the way, they are a strong motivation.
Steve B

How to make net price field in Purchase Order Uneditable

Hello all,
I am facing a problem. During creation of purchase orders the material price is picked up from the Info Record, but the net price field is editable. Please guide me how through standard SAP can i make this net price field uneditable.
Thanks in Advance,
Ritesh.

Hi Ritesh,
You can goto:
SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level
from here you select ME21N-Selection group-Quantity and Price.
Make the price and price unit as DISPLAY.
By this it will show only display for price, but you have to take not that there is also condition tab which user can change the price, this price is from INFOREC.
Goto to M/06 select your Condition type, In Manual entries maintain "D"-Not possible to process manually
Regards,
Maia

Credit price field in VBRP

Hello ,
Why some of the discounts are not included
in the credit price field calculation VBRP-CMPRE?
Is this customizing issue of the discount conditions?
Thanks and Best regards
L

Hi,
Your question is not clear.
If your credit management is active and if you assign Subtotal as 'A' in your pricing procedure after all your calculations are done, the Net amount while will be verified for credit check will appear in VBRP-CMPRE.
This has nothing to do with dicount conditions. If you want some discount condition to appear in VBRP, you will have to assign a subtotal to it, and then it will update VBRP for KZWI1, KZWI2, etc fields.
Hope it is clear.
Regards,
Amit

[ALV] Price field got truncated 2 digits after pressed 'Save'

Dear experts,
In ALV change mode, user change the data directly in ALV report.
There is one field which stores price information as defined with Domain-WERTV8.
When user input any price data, then press 'Save'. Then the price data will be truncated 2 digits always.
For example:
If user input 2222, then after saved, the ALV report will show as 22.22.
What we want is the ALV report still will show 2222 and updated to the table as 2222. But right now above issues existed...
If we change the table directly via SM30, the price data will not be truncated and no issues.
Please kindly let me know if any where has issues???
Thank you so much.

Hi,
     I think the problem is the currency key is not referred in the field catalog. The currency key should be referred always, while using currency in ALV.
    If you are using LVC_S_FCAT, pass CURRENCY field with the required currency like USD,LYDN etc. If the currency field is different for each line item, populate the currency field in the internal table and pass the fieldname declared for currency key in the internal table to CFIELDNAME. Also, decalre the currency field as type CURR in the internal table.
eg
wa_fcat-COL_POS      = '1'.
wa_fcat-FIELDNAME   = 'PRICE'.               "Price field in internal table INT_OUTPUT
wa_fcat-TABNAME     = 'INT_OUTPUT'
wa_fcat-CURRENCY   = 'USD'.
OR
wa_fcat-CFIELDNAME = ' CKEY'.            "Currency Key Field in internal table INT_OUTPUT
APPEND wa_fcat TO int_fact.

PO price field in PR not allow to change

Hi,
We have facing the problem related to PO price field in PR
Network through we are creating the PR, so system showing the field PO price under the valuation tab is always u201DAs Net Priceu201D and not allowing to change for this field.
My Quire is,
1) How to make this field to default to u201CDo Not Adoptu201D instead of u201CAs Net Priceu201D
2) How to allowing to change this field.
Could you please suggest the solution?
Devendra

One query has been resolved -u201CHow to allowing to change PO price field in PRu201D of follows to steps.
1) Create a Function Authorization
SPRO - Material Management - Purchasing - Authorization Management - Define Function Authorizations for Buyers and create Function Authorizations Ex-1
2) Assign the Function Authorization of specify User ID (SU53), Parameter ID-EFB / EVO & Give Parameter value-1
http://www.kowboyz.nl/blog/copy-price-purchase-requisition-purchase-order/
Network through created the PR system showsu201DAs Net Priceu201D in PO price field. But I want u201CDo Not Adoptu201D in this filed.
Please suggest me.
Devendra

Mandatory for price field

Hello,
How to make Gross price field as mandatory in CJ20N for service activity in network?
Prasad

Virendar, Ahmad, Kabir & All,
Thanks for your replies.
I tried that MM path.....for CN21 then for ML81
After doing this setting i created new WBS/ Network/ Activity(service)
But still it's not mandatory....
Kindly help me to solve this problem
Thanks
Thambi

MM02-Moving Average price field

i created material in moving average price but that time i am unable to maintain price for this material, after save the material master i am unable to give the price for this material
How to set the price field is optional in MM02 T.code or possible in any other way? after save material w/o price

When a material is subject to moving average price control, the system calculates values for goods movements in the following way:
Quantity(new) = Quantity (old) + Quantity (receipt)
Value (new) = Value(old) + Quantity (receipt) + (Price (receipt) / Price Unit (receipt))
Price (new) = (Value (new) / Quanitity (new)) * Price unit (material master)
or use the following link to get a better view...
http://help.sap.com/saphelp_erp2005/helpdata/en/47/60ff4849f011d1894c0000e829fbbd/frameset.htm

Price Field Changeable while creating the Shopping cart

Hi We are in SRM 4.0 and follow a classic scenarios.
For some materials we run program EBP_GET_BACKEND_PRICES
and get the prices from the backend, how ever while creating a shopping cart if the price differs we need to change the price but the field is grey.
how do we change the price ????
EX - My MAP in R/3 for Material A is 100 Rs. how ever while I create a shopping cart the price i need to enter is 102 how do I change the price.
can anyone throw light on this.
regards,
Nimish Sheth

Nimish,
for this you have to change the standard code.
In screen communication structures, there is a flag "price_changeable" that controls the edit mode of price field.
You have to change the standard logic to implement your behaviour in FORM price_changable_set from include LBBP_SC_APPF92:
IF es_item-mode EQ gc_display OR
    ( es_item-rfq_ind EQ gc_yes AND es_item-price IS INITIAL ).
    CLEAR: es_item-price_changeable.
ELSE.
    IF NOT es_item-catalogid IS INITIAL OR
       es_item-price_origin EQ c_price_origin_f OR
       iv_scenario EQ c_sc_generic_soco OR
       iv_scenario EQ c_sc_generic_history OR
       iv_scenario EQ c_sc_generic_workload OR
       ( es_item-price NE es_item-gross_price AND
         NOT es_item-price IS INITIAL ).
      CLEAR: es_item-price_changeable.
    ELSE.
      es_item-price_changeable = gc_yes.
    ENDIF.
ENDIF.
Rgds
Christophe

Calculate price field in SRM-MDM

Hi.
I am using the standard SRM-MDM repository as my catalog. We recieve products and price information from different suppliers. But from one supplier we also receive a "discount" file. This file contains product number and a discount percentage. How can I calculate the new product price? The price field is from SAP set to currency type and is multivalued. It is also a part of the qualified lookup table price. And as far as I know it is not possible to add an assignment that calculates a field in a qualified table, and the fact that it is multivalued makes it impossible as far as I can see it.
Does anyone have any ideas? I have tried to solve this in the import map with value conversation, but the calculation opportunity here only supports fixed numbers.
Example:
Price amount: 50 EUR, stored in SRM-MDM
Discount in file 50 %.
Wanted new value in price field: 25 EUR
Regards, Anders

Hi Anders,
I found the solution for this in your subject(Calculated field), I think the possible solution can be:
Amount as Currency.
Price can be set as Currency and Calculated as Yes.
Discount as an integer.
In calculation expression write the expression, where if discount is Null the Price = Amount else calculate the discount and assign it to the price.
I hope this might work out and be useful to you. Let me know the results.
Regards,
Cherry.

PO price field in PR

Similar Messages

Maybe you are looking for