Can we edit Gross Price field in Sales Order

Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir Gandhi

Hi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon

Similar Messages

PO - Service tab gross price field is in display mode

Dear all,
My client requires
Contract relase order with reference to Service contract, the price for the service codes which is adopted from the service contract, it is picking and displaying it contract release PO. But the gross price is in changeable mode. But i need the gross price field is in display mode. it should be in display mode while creating realse orders for contract.
Expecting your earlier response
Thanks in advance
Raman

Hi Raman,
If you follow the steps mentioned in the note 30316 you will be able to find why the price in the contract is in changeable mode...and then we will be able to change the price to display mode.
Note: 30316
1. In Transaction SE37, display function module MEX_FELDAUSWAHL and set
    a break point at the first statement.
2. Start the program where you suspect a problem with field selection.
    The program should stop at the break point set above. Copy the
    import fields I_AUSWAHL0, I_AUSWAHL1, I_AUSWAHL2, I_AUSWAHL3,
    I_AUSWAHL4, I_AUSWAHL5, and I_AUSWAHL6 to the list of field names.
    The corresponding field contents show the field selection reference
    keys that are composed as follows:
3. You can check the field selection reference keys found in
     Customizing. For purchase requisitions, the Transaction code is
     OMF2, for purchase orders it is OMF4, for contracts OMFA, for
     scheduling agreements OMF7, for requests for quotation it is OME8.
    Or
    Tcode: OLME  Contract  Define Screen Layout at Document Level
4. All keys from the AUSWAHLn fields are used to determine the field
     selection and their status. They are set according to the following
     matrix.
     See the matrix in the note
Alternatively, the following can be stated:
     o Field status 'Hidden' takes highest priority. This means that if
        a reference key has defined the field as 'Hidden', all other
        reference keys are overruled.
     o Then follow statuses 'Display', 'Mandatory', and finally
        'Optional'. Accordingly, a field is assigned the attribute
        'Optional' only if all reference keys for the field are set to
        'Optional'.
I hope this information helps you to resolve behaviour.
Best Regards,
Gabriela

BP: can't edit "user name" field in section "employee data"

Transaction - BP, tab - identification, Change in BP role - employee.
why i can't edit "user name" field in section "employee data"?
Field is unchangeable only for one in a ~800 BPs.

Earlier it is possible to change the User ID field.
Guess that this might be ur prb
If this BP is used somewhere else I mean in some transaction/CRMD_ORDER/Support message,so it might be not possible to change this now....becuase the log will become incosistent.
for e.g. if in ticket XXXX i have been assigned as reporter as...BP no 10
Later you are assigning this to no 10 to some other person or ID ....
Then the log of CRMD_ORDER or ticket will become inconsistent because the BP is now assigned to a different person who never worked on the same.
Actualy i have faced this query during one implementation that why we are able to change the UserID of existing BP even if it is used in some transaction/message.
Might be this is a new correction in the recent release.
Regards
Prakhar
Edited by: Prakhar Saxena on Jan 16, 2009 10:10 AM

T code for editing the field in Sales Order

Dear All,
I want to change some field in sales order (display to editable)...
Please suggest me..........
Regards
Lallan....

Dear,
I hope it will reach your req:
Same post.....
Sales Order editing fields
Sap help.
http://help.sap.com/saphelp_47x200/helpdata/en/7d/f63a0d015111d396480000e82de14a/frameset.htm
How to do this process with screen shots..
http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
Regards
Chandra

Final price of the Sales Order calculation on payment term

Hi,
Out Business requirement as follows.
1) one ZNAP pricing condition will be maintained by the monthly wise by business for pricing. this is a statistical condition only checking at sales order level only. this condition will check with Final price of the Sales order.
Now the requirement is
1) based on payment term of the Sales Order. plus if its a credit payment if the its CASH payment. these deduction should be added to ZNAP condition, and same will calculate with Final price, while creating Sales order.
For Example:
ZANP condition maintained 1000 USD.
while creating the SO:
If the payment term of the customer: PT30, ( it means payment with be in 30 days of the bill creation date)
system should do the below calculations
1) Scenario
Sales Order: Final price :                                       1500 USD( maintained by the Sales User while creating the SO)
ZNAP price                      :                                    1000 USD
according payment term 30 days                            20 USD ( as per table maintenance for calculation of the payment term.)
Calcuation:                                                          1000+20= 1020 (approximate need to add as interest rate)
Then final it should display final price 1500-1020= 480 USD.
2) Scenario:
If the payment term Cash:
ZNAP                                                            : 1000 - 20= 980 ( approximately and deduct, from the condition due to cash payment its like discount)
calucalte"                                                       1500-980= 520 difference
this purely internal pricing calculation with final price...
pl let me know how to get this in the pricing. and payment could be 30 days, 45 days 60 days etc.
Thanks.

Hi M Sham,
I believe your requirement can not be met with Standard pricing and you will have to create Routines for getting this result.
From scenario I believe you will be doing below points:
You should Create Z-Table with Payment Term and respective rates against those payment Term.
You should create a statistical condition type(Ex. ZNP1) and create Calculation Type routine with Logic to get KOMK-ZTERM field and derive value from Z-Table and update XKWERT field.
Calculate addition of ZNAP and ZNP1 (With +ve or -ve Signs)
And then again make deduction of derived value from Finale Value.
Do let me know if I have misunderstood your question.
Regards,
MJ.

Price chnage at sales order level but not in billing

Hi
I want to maintain the price manually in sales order but donot want to allow user to change the price in billing. I understand it is controlled at condition type level but not at document level.
Need your advise as to how we an achieve it.
Regards,
Neeraj Srivastava

Hi Neeraj,
You can achieve this by following below setting:
Go to into the condition for which you want to maintain price manually.
put C in manual entry field.
Set check mark for Header cond., Item cond & Delete only. Remove check mark for Amount/percent & value. Save it.
Go to pricing procedure and mark this condition for manual entry and mandatory.
Only thing in this is you need to put this condition in sales order manually & maintain price for this condition before pressing "Enter". Once you press "Enter" it will go in gray mode.
Ramchandra

Profit center mandatory field in sales order !

Hi All !
How to make profit center mandatory field in sale order can any body let me know...
Thanks & Rgds
Naveen

Hi
You can either Transaction variant SHD0/User exit
Refer below<a href="http://www.sap-img.com/sap-sd/supressing-fields-in-sale-order.htm">Fields in Sale Order</a>
help required: how to makes sales office field mandatory, in inquiry and qu
Re: supress some fiels in sales order? user exit?
Message was edited by:
SHESAGIRI.G

Price in the Sales Order

Dear SD,
Normallly we enterd the Price in the Sales Order for a Finished Goods. Is there any other way, that Sales Order Directly Picks the Cost from Pricing Procedure.
REgards

Hi,
I understood that you need the following clarifications.
1.     VPRS: This is cost price. For example, you are doing trading business and you buy an item for Rs. 125. This is cost price. This price is maintained in material master in Accounting view in the field Standard Price.
2.     PR00: This is selling price. This includes the profit. In this example, say it is 200. This is maintained in Condition records. The transaction code is VK11.
3.     Pricing Procedure: Both of the condition types (VPRS, PR00) are maintained in the pricing procedure. Please check the standard pricing procedure RVAA01.
If the condition type is not maintained in your pricing procedure, you can add the condition type VPRS in your pricing procedure and assign the requirement as 4 (Cost). Enter tick mark in u2018Statisticsu2019.
If you create a sales order, you will get the value of PR00 (selling price) and the Cost price (VPRS) in the sales order. Sales order is a document that can be sent to the customer to confirm the sales. So, here you do not want to show the cost price of the item. That is why the condition is not selected for print. If you are dealing with your associate companies and you want to print the cost price in the sales order, you can print the cost price VPRS in the sales order. To do this, select u2018Xu2019 in print column of the pricing procedure for Condition type VPRS. Hereafter you can print the cost price of the item in the sales order. But it should be printed appropriately with the help of an ABAPer.
4.     VPRS u2013 Statistical: VPRS is always maintained as statistical. This is not used for updating financial entries while creating billing; but it is used to find the profit margin. Whenever the cost price of the material changes, we have to update the cost price (VPRS) by transaction code MR21.
5.     Stock value: While calculating warehouse stock by transaction code MB52, the system takes the value given in the material master in accounting view. The value shown in VPRS and Value taken for stock valuation are one and same. Stocks are evaluated on cost price; not on selling price.
Hope this information will be useful to you.
Regards,
K Bharathi

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Planned delivery time field in sale order

Dear All,
During creation of STO at item level under delivery TAB "planned delivery time" field is showing with edit mode, I want to activate this field for sale order creation / change also. Plz advice how I can do this.
regards,
sps.

Dear SP
This field is laready there in the MRP-2 of the material master. This is used to calculate the no. of days to procure a material/service externally. Why do you want to activate this in sales order.
Thanks
Shuktiz

Net Price of a Sales Order

Hi All,
In standard system the net price of a sales order is given by the condition type PR00. Is it possible to change the source of net price to customer-defined condition type like ZFMA?
Thanks + Best Regards
Jerome

Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type 'PR00' & copy as 'ZMFA'.
General process for configuring pricing procedure:
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
In SD, the steps to configure Pricing procedure are as under:Step 1:
Condition table: If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence: If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure: It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure: After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
Step 5.
Condition record: Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc.
It is assumed that document pricing procedure, customer pricing procedure , ... are in place.
Regards,
Rajesh Banka
Reward points if helpful.

Customer wants to see Discount Field and Quantity field in Sales order Form

Hi Gurus,
Highly appreciate if you provide the solution for below issue:
My customer requirement is to see Discount field in sales order lines screen...They want to know how much percentage of discount they are giving to customer, if they want to modify for respective line they modify in that field.
Standard functionality discount field is NOT there in SO lines for because they manual enter discount in SO form, system should calculate Discounted price.
One more required if they enter Item code, able to see available quantity bottom of the form Sub inventory wise, Availability, resealable.
Current standard functionality supports - Click Availability button to check the availability..Its very difficult for them to check for each and every line item, is there any functionality to support this issue.
Thanks
Satti

Hi,
Both of your requirements should be customised.
There is no standard functionality which attains your requirements.
For my present project, we have customised 2 seperate reports, one which shows the availability of the items in subinventory and locator.
Also a report which shows discount for all the lines and for the entire order.
Thanks
-Arif.

Create a new field in sales order

HI folks i want to create a new field in sales order item level how can i create

Hi,
Hope this will help you,
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.

How can i change unit of measurement in sales order on header

Dear all,
I have material master with base unit of measurement " Ea ".
I have to take unit Pc in sales order.
how can i change unit on header in sales order.
i changed unit on line item in sales order by setting in sales unit field in material master.

Hi,
You can very well do it, please do the following steps,
Go to material master and select the Sales Org.1 and 2, here maintain the sales unit PC and
it will ask you for the conversion, so maintain your conversion for PC to EA. Then maintain
the Division, delivery plant, material pricing group and account assignment group(if not maintained) and save it
Now create the sales order for that resp. material, you will find that system will pick up
the sales unit which is maintained in the material master's sales orgnization tab.
For this you need not to change at the header level of sales order
Please check and revert.
Thanks,
Hrishi

Cost centre field in sales order account assignment screen

Hello all,
I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
Thanks in advance
Raju

The Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason.

Can we edit Gross Price field in Sales Order

Similar Messages

Maybe you are looking for