How to make net price field in Purchase Order Uneditable

Hello all,
I am facing a problem. During creation of purchase orders the material price is picked up from the Info Record, but the net price field is editable. Please guide me how through standard SAP can i make this net price field uneditable.
Thanks in Advance,
Ritesh.

Hi Ritesh,
You can goto:
SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level
from here you select ME21N-Selection group-Quantity and Price.
Make the price and price unit as DISPLAY.
By this it will show only display for price, but you have to take not that there is also condition tab which user can change the price, this price is from INFOREC.
Goto to M/06 select your Condition type, In Manual entries maintain "D"-Not possible to process manually
Regards,
Maia

Similar Messages

Make net price field in me12 modifiable.

How to make net price field in me12 modifiable.
I have screen Layout & Screen variant but didnt get any clue.

the net price is a calculated field in case you maintained price conditions (big button on top of the screen), then it is not changable anymore.
the net price is just information for the user, it is not taken as price to a PO if no condition exists.

Make short text field in Purchase order creation only display..

Sir,
Yeah my requirement is quite unusual, but such is the situation.
I want to make the short text field in purchase order creation "only disply". what is happening is that user while creating PO is able to change the text of material in short text column. I want to make it only for display.
Can it done on document type level, since for service type, and Text type of account assignment cat, only text field is filled up. so how to do it.
Please assist...
Rahul

Dear Rahul,
If you want to have the short text display only for standard item but not service item, you may check below customizing.
Transaction SPRO:
MM-PUR-PO
-> Define screen layout at document level
Field Selection group: Basic Data, Item
Field Selection Key: PT0F Standard item purchase order
Field: Short text -> set as display
Hope this help.
Ian Wong Loke Foong

Net Price Control in Purchase Order

Hi
Purchase Order Net price is coming from Info Record.
My company want that NO changes should be made in the PO net price by user while creating PO and accept price coming from Info record only.
How to do this. Please help.
Sunil Kolambkar

Hi,
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here check the "Field Selection Key" against the PO doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF")
Then go to
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Select the " Field Selection Key" of ur doc type..Just Double click on that
then click on "Quantity and Price", there you can see the "Price and price unit" field..
against that field you can see three options, Reqd.entry Opt. entry Display...
Here tick the field "Display", So that You can get this field in Change mode in ME21N trx...
If you want you can create a NEW Doc type & Use it..
Thx
Raju

How to add tab and field in purchase order

hi friends,
I have to make changes in the purchase order. i have to add tab and a field in that.
i know that badi ME_GUI_PO_CUST have to used this.
can anyone send me the code or documenation fot add a tab and field using this badi or suggest me how to do this.
if code or documenation is not available then send me the steps if possible.
my mail id is [email protected]
[email protected]
hitesh kumar

Hi,
1. Double-click on your implementation class
2. Click on Attributes tab
3. Add attribute SUBSCREEN1 with level Constant, visibility Public, type MEPO_NAME, initial value 'HDRSCREEN1'.
please go thourhg the below link .... in this the steps are there and the some of the standard Enchancements also there.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
See this treads :
ME_PROCESS_PO_CUST header n item connection
Re: BADI IF_EX_ME_PROCESS_PO_CUST~PROCESS_SCHEDULE
<b>Reward points</b>
Regards

Is there any transaction that will change net price in a purchase order

Hi All,
Is there any program / transaction where i can change the net price for few materials in the purchase orders (say 100 purchase orders) which has been created few days back. Please let me know at the earliest.
Regards,
PSS

Hi,
By changing the price in the Info Record price condition it is possible to made to reflect the same in PO Net Price through Automatic document Adjustment.
MEI1 & MEI2 are used for Invidual & Mass processing.
Its applicable to Vendor / Material combination i.e. Info Record.
Regards,
Ramesh

HOW TO MAKE MATERIAL DESCRIPTION FIELD IN SALES ORDER AS UNEDITABLE

how to make the material description field as un editable in sales order , pls help me

Through Transaction Variant <b>SHD0</b>
Refer the thread
/message/4083386#4083386 [original link is broken]
Message was edited by:
SHESAGIRI.G

How to block post price conditions in purchase order

I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your help

The system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

How to block post price conditions in purchase order after doing MIGO

I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your help

The system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

How to transfer Supplier custom field into Purchase order

Hi ,
We had a custom field called Project code in Supplier data (vendor master) at SRM. As per flow purchase order gets created as a follow-on document. Now the requirement -Project code which was there in supplier data this should be transfered to PO
In my knowledge this can be done through BADI , Could you please explain me steps required to do this?
Thanks in advance.
Harish

Try BBP_DOC_CHANGE_BADI or BBP_ITEM_CHANGE_BADI.

Authorization to display Net Price (NETPR) in purchase orders

Hi,
Where is the authorzation configured to hide the net price in purchse orders? I think it's a configuration setting (the IMG, SPRO) but I don't know where.
Thanks.

hi,
chek with your basis person. he shud be able to acord authorisations based on the steps in the pricing procedure. he can withdraw the authorisation of viewing from teh step where the value is calculated.
saurabh

How to make plant mandatory field in Sales order thru standard SAP process

Hello,
There is requirement in business that User wants to make plant field Mandatory in Sales order line item once material number is entered. Can you please guide me how I can make Plant field mandatory thru Standard SAP process.
I had checked it thru Incompletion process & Order type incompletion messages but still Plant field is not becoming mandatory in Sales order. It only gives incompletion log while saving the SO. Please suggest how to do it thru Standard SAP process.
Thanks & Regards,
Saurabh

HI
Plant will determine based on Customer-material Info Record, Customer Master data & material Master
If plant is not mandatory in customer Master and Customer material no problem
but at the time of creating the material master Plant Mandatory as per my knowledge, so system will pick plant from Material master that is the case why you required plant Mandatory in Sale order level
and you need to do Shipping Point Determination for that plant
Did you check by using User Exit ? if not try once what i have suggested
Try with User Exit
MV45AFZZ , FORM USEREXIT_SAVE_DOCUMENT
VBAP - WERKS = " "
if VBAP - MATNR , POSNR = not initial
Error Messgae "E"
Check and Revert
Regards,
Prasanna
Edited by: prasanna_sap on Feb 14, 2012 11:41 AM

Unit price validation in Purchase Order, Goods Receipt PO and A/R Invoice

Hello!
I want to have validation of the Unit Price field in Purchase Order, Goods Receipt PO and A/R Invoice documents.
This means that user has to get some kind of message if she/he do not enter the Unit price in above mentioned documents.
I can not use the price lists for this, to get the field populated automatically, because I do not have all the prices...
I am no longer newbie when it come to SAP, but this really puzzles me
Thanks,
Dejan

Hello guys,
I have tried to add this code to check if the field Unit Price was empty in the Purchase Order form (Object ID 22)
But it gives me an error message - Error converting data type varchar to numeric (CINF)
I am getting the same error message even if I have some value in the Unit Price field...
I am really confused - what is wrong with it???
Here is the code from the Transaction notification
IF (@object_type = N'22' AND @transaction_type in (N'A', N'U') )
     BEGIN
          IF EXISTS (SELECT T1.DocEntry FROM OPOR T0 inner join POR1 T1 on T0.DocEntry = T1.DocEntry
          WHERE (T1.PriceBefDi IS NULL OR T1.PriceBefDi = ' ') AND T0.DocEntry = @list_of_cols_val_tab_del)
               BEGIN
                    Set @error =1
                    set @error_message = 'Unit Price cannot be blank'
               END
     END
Thanks,
Dejan

How can I hide or make visible the fields at the order and at the delivery?

How can I hide or make visible the fields at the order and at the delivery?
Thanks in advance.

Hi,
For sales order, use user exit :
MV45AFZZ and FORM userexit_field_modification.
For deliveries, use BADI :
LE_SHP_DELIVERY_PROC (see with Tcode SE18) and method CHANGE_FIELD_ATTRIBUTES.
Create implementation in ref to this badi with Tcode SE19.
Regards,
Lionel

How to make read only field in Task list?

Hi All,
How to make read only field in Task list?

This can be done one of two ways:
1. Customize the form in Infopath, right click your field and disable the control.
2. Use JavaScript/jQuery on the page to disable the element.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to make net price field in Purchase Order Uneditable

Similar Messages

Maybe you are looking for