PO strategy even if PO's value is not modified

We have Purchase Order Release Strategy based on value and type document.
In a second moment we have set changeability indicator of Purchasing Document During/After Release to 6.
This happens: I have a PO released, then I change a field different from value or type document but
there is a reset of release procedure. Why?
In details:
1.     POu2019s value at first release was for example 1000.
2.     Then POu2019s value was changed to 1001 and there was no reset.
3.     Then we implemented changeability indicator to 6.
4.     Then PO was modified in a field different from value or type document but the system resets the release procedure. It is strange because the release strategy is always the same.
Best Regards.
Claudia.

every field, fox example also the description of position.
Thanks
Claudia

Similar Messages

Maintain the values - Client 'Not Modifiable'

Hi,
I have created a table Y1260. It has three fields namely MANDT, WERKS and FLAG.
I have given Delivery Class = 'C' and Maintainance allowed.
Under technical settings, Data Class = 'APPL2' and Size category as 0.
Buffering is set 'OFF'.
Under Table Maint., Authorization Group is &NC&.
When I go to SM30 for maintaining the values, it is not allowing me stating that .. Client 010 has status 'not modifiable'.
Please help me to solve this issue.
Thanks in advance.

Hi,
You have given deleivery class 'C' which means customizing table, maintenance only by cust., not SAP import..
Try to change it to 'A'.
Regards.
Mudit

Release Strategy Triggered even if the characteric values were not correct.

Hi,
I have configured release strategy based on characteristics
Purchasing group and
Document type
It has 2 release indicators with 3 levels of release.
There are 2 release strategies assigned to same group 01 but have different release codes namely 01,02,03,04
Release Strategy A1has
Doc type NB and Purchasing group 120
Release Strategy A2 has
Doc type ZINT and Purchasing groups 130,131,132,134,135,136,137,138,139
However a strange thing happened.The release strategy was triggered for doc type NB and Purchasing group 190.
This purchasing group is not listed in either of the 2 strategies
Can any one explain why the release strategy got triggered?

That means the old release strategy is not cleraed from the system
do one test
Go to CL30N tocde and enter you release class and class type 032
hit enter
now here enter the value of your char which is in the PO and hit Find in initial class from header
see which release strategy is pulled by the system
here you will see the release strategy and make sure that is not other than what you expect

Netbeans 4.1 Recompiling even if the source code is not modified

I am new to NetBeans 4.1
So Please guide me
I have 300 Java Source files
I installed Netbeans and have my source code in Netbeans But as soon as I run Executable.java It compiles all the files and Runs it
But afterwards when I run that file again it again compiles all the files which unneccasirily wastes Time
Is It proper
I think it should check for modified files and then compile
Please help me regarding this
Bye for now
CSJakharia

One other thing to note: you may want to subsrcibe to the mailing list: [email protected] That list is a focal point for the NetBeans user community.
Continuing this thread in this forum might not be as effective as starting a new thread on that list.
vbk

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Credit Management-Sales value updated in FD32 even though credit set up is not active

Dear Team,
We are facing an issue where, for a sample order - sales value got updated as open sales order value against a customer in FD33.
Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD). Since this has occurred in 2003, we have no clue what exactly has happened. We cannot locate any change logs in the configuration level.
1) What is the possibility for credit management to be active for a document type, which was not meant for credit set up?
2) How to remove the open order/ delivery value for the customer?
Thanks and regards.
Sivarajesh

Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD).
the above two settings are credit checks at what level( example order level or delivery etc) you what to block the customer if the customer payer exceeds the credit limit.
Where as if the credit active field is active in VOV7 in corresponding item category, system update the respective document values in to credit management (FD32/33) in your example open order value.
Even though OVAK, OVAD settings are not done still system update the document values in to FD33 subject to credit active field is active in t code VOV7 .
Please check in your item category whether credit active field active.
thanks,
Srinu.

Contract Release Value is not updated with Confirmation or Invoice value

The release value for a contract in SRM EBP shows the value of purchase orders created using that contract. It does not take into account confirmation and/or invoice values.
For example I create a PO for 10 items at £100/each using Contract ABC. The total value of the PO is £1000 and the release value contract ABC would be £1000. If I then only confirm and invoice 5 items (£500) for the PO, the release value of contract ABC stays at £1000 even though I would expect it to update to £500
Therefore the release value of the contract could be incorrectly overstated if purchase orders are created against the contract but not actually invoiced/confirmed for their total value.
Please could you confirm the correct functionality and how I could find out the the true invoice value of purchases made using a contract?

Hi
Which SRM and R/3 versions are you using ?
Meanwhile, please go through the following SAP OSS Notes, which will help in this case ->
Note 622045 Net value in release overview of contract is incorrect
Note 493519 Release quantities are not updated
Note 1108322 BBP_CONTRACT_CHECK wrong calculation of values
Note 1102886 Contracts: Lesser Field length for Target Value
Note 1082548 Check of Released quantity and released value in contract
Note 656181 Release synchronization of releases on services
Note 874920 Currency not allowed to be changed for a 'Released' Contract
Note 703771 Resetting release values during purchase order item deletion
Note 643823 BLAREL: Incorrect values in service segment
Note 519879 BBP_CTR_MAIN: No message when values in Contract are reset
Note 520734 Target value not converted if currency is changed
Note 528897 Documents not displayed in contract release order overview
Note 430373 BBP_CON_MNT: No releases available
Note 491993 Entry of contracts with target values
Note 437491 Purchase contract: Incorrect update of the call-off values
Note 406799 BBP_CON_MNT: Fields after contract release ready for input
Note 398168 Purchase contract: Target value is not changed
Do let me know.
Regards
- Atul

Sales value is not updated in fd33

Dear Team,
I have an issue, Full Advance payment has been received from the customer, after Sales order has been created against this customer, Even Credit Exposure Value shows the more than the order values, but the order still goes for credit block,
There is no open due items for this customer,
When I checked in FD 33, Sales Value(the one which is raised currently) is not updated it shows 0.01, Sales Order is open now with credit block, Can any body clarify why the sales order value is not get updated in FD33.
How do i re update the value and remove the block without releasing from VKM3,
Thanks in Advance,
Muralidharan S

*

R/3 ZCOND values are not picked properly in BW

We had a issue in one of the BW Reports. There are three types of discounts offered in the sales, namely Hospital Discount, Market Discount & Pharmacy Discount.
For certain billing document nos, the R/3 and BW values were not matching. However, the Net Amount is matching.
There is a table by the name ZVBW_PRICE_COND which is a view created out of the tables VBRK, VBRP & ZSBW_PRICE_COND.
In R/3, we put the POSNR value (Billing Item) and BELNR value (Billing Doc no.) to generate KNUMV value (Number of Document Condition) and KSCHL values.
In the KONV table, we put the KPOSN (Condition Item no.) = 10, KNUMV value and KSCHL value (Condition Type) to get the Condition value.
The value generated was ok and were same as that of vf03.
Now we checked the Data source 2LIS_13_VDITM and its extract structure.
Here we found Field only in Customer Exit checkbox ticked for ZCOND1 to 4.
However, in BW, there are specific Infoobjects like Condition Value1,2,3,& 4 each of which is directly mapped to ZCOND1,2,3,& 4 respectively.
Hospital Discount and Market Discount are mapped to ZCOND3 & ZCOND2 respectively in the concerned report.
I could have remove the ticks in the checkbox and make ZCOND accesible to extractor. But problem is that it is only certain billing doc nos for which discounts are not matching. Any help will be highly appreciated.
Best Regards,
Surajit

Hi,
This checkbox is set for those fields of the datasource(in rsa6) which are custom fields,and whose values are determined by a user-exit written in tcode CMOD.
We have observed that keeping this checkbox ticked or unticked does not make any difference at all.So even removing this checkbox for your 4 fields will not solve the mismatch issue.
The mapping for the 4 fields in your case,is already there in BW.
Please go to tcode CMOD,enter the BW project name,select components and click on display.4 user exits will be displayed.
1st is for TD datasources,2nd for master data attr,and next are for text and hierarchies.
Double click on 1st exit FM,then double click on the include program,and find the exit code written for your datasource.Most probably user-exit not working OK.
cheers,
Vishvesh

UDF Value is not coming in the query report

Hi all,
i have designed query report based on AR Invoice which has some UDF .
all udf have FMS applied and all these udf has values.
when i run report some times udf values are coming in the report and somtimes not even if udf contains values.
if i open perticular invoice and again update that udf and again run report now udf value will come in the report.
every time i need to manualy update the udf even if that udf contain value.
how to avoide this problem.
Pls suggest solution.
Regards,
Chetan

Hi Chetan,
Try this,
-> Open the require document(module).
Assign this procedure and then ADD the document
and Run the Query Report.
1. Goto the UDF and Click (ShiftAltF2).
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query in UDF.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select the Auto Refresh Field (for example CardCode (or) Remarks).
6. Check the Display Saved Values.
OR
-> Open the require document(module).
1. Goto the UDF and Click (ShiftAltF2).
2. When will you add the document at that time
you can Click the SHIFT + F2 and than ADD the document.
and than Run the Query Report.
Regards,
Madhan.

The user exit-sy-ucomm value is not changing

Hi Everyone,
I have created a subscreen to be called from the program SAPLXQQM (Notification header).Within that suscreen (0115) I am calling another screen (say,1000) after wrapping it in a FM, as shown below:
Code in the flow logic of subscreen 0115-> Call Function 'XYZ' .
FM 'XYZ':
Function XYZ
Call screen '1000'
End Function XYZ
This is done by pressing a button created on the subscreen with F-code already provided in the enhancement.
After the processing of the FM the control comes back to the calling screen of the subscreen 0115. Here the value of sy-ucomm is the same as that while calling the FM 'XYZ' .Now the problem here is that this value is not changing even when the control comes back and I do any other event like pressing an 'Enter' or 'Scrolling'.So the FM gets called again and again.
I want to know why is this hapening and how can I rectify this?Is this because of the way I called the screen 1000 from the subcreen 0115.
Please reply.
Regards
Abhishek

Hi abhishek,
Once after completing the processing of ur sub subscreen(0115) u r cming to ur subscreen
and still getting the same screen(0115) for any other event, it might mean that the events which u r calling are not defined with the respective ok code.
Bcoz of which every time after calling other events ur sy-ucomm is not getting modified
bt persists the same old value.
Pls chk the Function codes neccessary to trigger other events. eg: back button
regards,
ajit.

Value does not fall within the expected range in my itemupdated eventreceiver while accessing a splist column on the root site collection

hi,
I am performing the below operations:
1) Itemupdated event handler when a document is uploaded into the document library
2) Now amreading another list which is in the root site level so, i used spsite, spweb again and accessed that splist and trying to read single line of text column and user or group column.
Now when i am reading this, i am getting the error "Value does not fall within the expected range".
I went to resource throttling under central admin -->my current web appln and changed that value to 20 from 8
even after performing the above, i am getting the same error.
pls help anyone has faced this issue before.
Accessing a splist which is under root site collection within the itemupdated eventreceiver is allowed in SP ?

hello sir,
as per my requirement i have to access a splist which is residing in the ROOT SITE COLLECTION OF THIS WEB APPLICATION. the event receiver i have written is residing in one of the few document libraries within the sub site. there are hundreds
of sub sites exist in this site collection. I need to access the root site collection within the itemevent receiver and access thatperson column from that splist. why i ahve kept this list at the root site collection level [
http://server1:2020/ ] , because this splist is the UI for customer's sp admin for performing weekly tasks. like adding few items in the splist and my event receiver fires and check this column- person /group
column ] and apply permissions on the document.
so my doubt is it possible to access the root site collection from my event receiver code.
spweb from properties web is just the subsite url and not the site collection. i want to get the root sitec ollection url's splist.
also am already running this code under runwithelevatedprivileges.

Error AU133 Account 'Contra account: Acquisition value' could not be found

I have this error when running RAPERB2000 program in IDES ECC6.0.
I have checked AO90 and this B/S account (199990) is maintain correctly in area 64 for the account determination.
This is the job log:-
02.12.2010 23:21:41 Errors occurred during the posting run (see the log)
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 30000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 40000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 30000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Document INT-000026 was created successfully for Asset Accounting
02.12.2010 23:21:41 Company code AA01, depreciation area 99, fiscal year 2010, account group 20000
02.12.2010 23:21:41 Document INT-000027 was created successfully for Asset Accounting
02.12.2010 23:21:42 Errors occurred during the posting run (see the log)
Anyone has any idea why this error occur?

Hi,
Error AU133, is generally issued from some wrong or missing customizing. The text of the error message indicates in your case that a "Account 'Contra account'" and area 64 is concerned.
1) At first, please double check if in in AO90 (or table T095) the account is maintained for area 64. Do you have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90)?
Further, check in tr. OADB if you have defined "Different Depreciation Area XX". That means area 64 takes the account determination from area xx and perhaps there it is no account defined?
If this is not the reason:
2) Execute report RACKONT1 or transaction OAK4. Account determination should be set following the rules explained in SAP note 7595. Even if some account is not directly used, the account determination has to be completed. If output from RACKONT1 is not error free, it indicates that your customizing is wrong. You might correct it with the help of note 7595.
Furthermore:
3) You have defined the account in Asset Accounting, however, it is not created in the affected company code. Check whether the account is correct and create it for the company code, if necessary.
4) You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for the "Acquisition:Acquis. and production costs" account). This is not permitted.
5) As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
Regards Bernhard

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

Excise Values are not flowing from J1IJ to VF01

Hi All,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
I have gone through SDN, everybody is suggesting about 356 routine.
My scenario is STO from Plant to Depot and Sale from Depot to Customer.
ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
In J1IJ, excise values are coming but in VF01 it is not coming.
Kindly help me.
With Regards
Azeez.Mohd

Hi,
in j1ig initial screen which excise group/series group i need to enter
is it of supplying plant or depot --- Enter Your Excise group
If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
You can also use the Excise Invoice Details tab
Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
use Depot Excise Invoice in case of transfer from another depot
and Excise Inv. Date
On next screen,
In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
Hope this will resolve your issue.
Regards,
Krishna O

PO strategy even if PO's value is not modified

Similar Messages

Maybe you are looking for