PO struck in BBP_DOCUMENT_TAB

Hi,
Scenario: Classic.
In my system, 6 carts created by one user, and struck in item transfer in process. What ever the carts created by the user all are not going to backend system. I have checked no error for the user.
Here all the documents are in BBP_DOCUMENT_TAB TABLE. Even if i Run Clear_reqreq_up and bbp_get_status_2 no use.
And even if run FM BBP_REQREQ_transfer also no result.
Could some one please suggest.
Regards,
Satish

Hi Satish
table must be clean.
escalate to SAP . they supply one note to delete this unwanted POs in the BBP_DOCUMENT_TAB .
did you delete any PO w.r.t sc ? and PO created a new for that sc ?
Are you in production syatem ?
if it is testing. you can manually clear them
br
muthu

Similar Messages

Sharepoint Designer 2010 Workflows Struck in "starting" status after Sharepoint 2010 SP2 upgrade(KB2687453 - June 2013)

We have SPD workflows and Nintex workflows which are configured to start automatically on a Document Library which have content type. After we have been installed KB2687453
(sp2) , all the workfows running on documnet library with content type got strucked and always saying" starting". Please help us.,... highly apprciated as it's urgnet. Thanks in advance.

Hi nart ,
It is a known issue. Please install the June 2013 CU to solve the problem.
June 2013 CU:
http://blogs.technet.com/b/stefan_gossner/archive/2013/06/12/june-2013-cu-for-sharepoint-2010-has-been-released.aspx
For more information, you can refer to the thread:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

RECEIVING OPEN INTERFACE TABLE의 STRUCK RECORDS 정보 취합 SCRIPT

제품 : MFG_PO
작성날짜 : 2005-01-27
RECEIVING OPEN INTERFACE TABLE의 STRUCK RECORDS 정보 취합 SCRIPT
=================================================================
PURPOSE
RCV_TRANSACTIONS_INTERFACE table에 있는 struck receipt records의 정보를
취합하여, struck 원인 및 해결에 도움을 줄 수 있다.
(Oracle Purchasing - Version: 11.5.2 to 11.5.9)
Explanation
Receiving Open Interface Tables에 걸려 있는 receipt struck의 source
document의 추가 정보를 어떻게 취합할 수 있을것인가?
(RCV_TRANSACTIONS_INTERFACE)
Source document는 아래 중 하나가 될 수 있다.
* Purchase Order
* Return Material Authorization (RMA)
* Internal Requisition
아래에 소개하는 scripts는 interface tables에 많은 수의 records가 있을때,
많은 수의 records의 정보를 한 번에 취합하길 원할때 사용하면 유용하다.
만약 interface tables에 단지 몇 개의 records만 있다면 Note: 171257.1
- Oracle Procurement (Purchasing)/iProcurement Diagnostic Tests 에 소개
되어져 있는 적당한 diagnostic script를 이용하는편이 낫다.
Example
1.Error가 발생한 Purchase Order receipts의 추가 정보를 취합하는 script:
SELECT SUBSTR(POH.SEGMENT1,1,10) "PO Number",
POR.RELEASE_NUM "Release Num",
POL.LINE_NUM "Line Num",
RTI.INTERFACE_TRANSACTION_ID "Intf Trx Id",
RTI.TRANSACTION_DATE "Trx Date",
RTI.PROCESSING_MODE_CODE "Proc Mode",
RTI.TRANSACTION_STATUS_CODE "Trx Status",
RTI.PROCESSING_STATUS_CODE "Proc Status",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message",
POH.ORG_ID "Op Unit Id",
RTI.PO_HEADER_ID "PO Hdr Id",
RTI.PO_RELEASE_ID "Rel Id",
RTI.PO_LINE_ID "PO Line Id",
RTI.PO_LINE_LOCATION_ID "Line Loc Id",
RTI.QUANTITY "Intf Qty",
POLL.QUANTITY "Order Qty",
POLL.QUANTITY_RECEIVED "Qty recvd",
POD.QUANTITY_DELIVERED "Qty Delv",
NVL(POLL.CLOSED_CODE,'OPEN') "Closed Code",
OOD.ORGANIZATION_CODE "To Inv Org",
RTI.DESTINATION_TYPE_CODE "Dest Type",
RTI.TRANSACTION_TYPE "Intf Trx Type",
NVL(POLL.QTY_RCV_EXCEPTION_CODE,'NONE') "Qty Exception",
POLL.QTY_RCV_TOLERANCE "Qty Tolerance",
POLL.RECEIVE_CLOSE_TOLERANCE "Receipt Tolerance"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
PO_HEADERS_ALL POH,
PO_RELEASES_ALL POR,
PO_LINES_ALL POL,
PO_LINE_LOCATIONS_ALL POLL,
ORG_ORGANIZATION_DEFINITIONS OOD,
PO_DISTRIBUTIONS_ALL POD,
PO_INTERFACE_ERRORS PIE
WHERE POH.PO_HEADER_ID = RTI.PO_HEADER_ID
AND POR.PO_RELEASE_ID(+) = RTI.PO_RELEASE_ID
AND POL.PO_LINE_ID = RTI.PO_LINE_ID
AND OOD.ORGANIZATION_ID(+) = RTI.TO_ORGANIZATION_ID
AND POLL.LINE_LOCATION_ID = RTI.PO_LINE_LOCATION_ID
AND POD.LINE_LOCATION_ID = POLL.LINE_LOCATION_ID
AND RTI.INTERFACE_TRANSACTION_ID = PIE.INTERFACE_TRANSACTION_ID(+);
2.Error가 발생한 RMA receipts의 추가 정보를 취합하는 script:
SELECT RTI.INTERFACE_TRANSACTION_ID "Interface Transaction ID",
RTI.PROCESSING_STATUS_CODE "Processing Status",
RTI.PROCESSING_MODE_CODE "Processing Mode",
RTI.TRANSACTION_STATUS_CODE "Transaction Status",
RTI.TRANSACTION_TYPE "Transaction Type",
RTI.TRANSACTION_DATE "Transaction Date",
RTI.OE_ORDER_HEADER_ID "Order header Id",
OOH.ORDER_NUMBER "Order Number",
OOH.ORG_ID "Oper Unit Id",
RTI.OE_ORDER_LINE_ID "Order Line Id",
OOL.INVENTORY_ITEM_ID "Order Item",
OOL.FLOW_STATUS_CODE "Line Flow Status Code",
RTI.QUANTITY "Intf Qty",
RTI.UNIT_OF_MEASURE "Intf UOM",
OOL.ORDERED_QUANTITY "Qty Ordered",
OOL.SHIPPED_QUANTITY "Qty Shipped",
OOL.FULFILLED_QUANTITY "Qty Fulfilled",
OOL.OPEN_FLAG "Open Flag",
OOL.CANCELLED_FLAG "Cancelled",
WH.ORGANIZATION_CODE||' - '||WH.ORGANIZATION_NAME
"Ship To Organization",
WH1.ORGANIZATION_CODE||' - '||WH1.ORGANIZATION_NAME
"Ship From Organization",
OOL.BOOKED_FLAG "Booked",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
OE_ORDER_LINES_ALL OOL,
OE_ORDER_HEADERS_ALL OOH,
ORG_ORGANIZATION_DEFINITIONS WH,
ORG_ORGANIZATION_DEFINITIONS WH1,
PO_INTERFACE_ERRORS PIE
WHERE OOL.HEADER_ID = RTI.OE_ORDER_HEADER_ID
AND OOL.LINE_CATEGORY_CODE = 'RETURN'
AND OOL.LINE_ID = RTI.OE_ORDER_LINE_ID
AND OOH.HEADER_ID = RTI.OE_ORDER_HEADER_ID
AND OOL.SHIP_TO_ORG_ID = WH.ORGANIZATION_ID(+)
AND OOL.SHIP_FROM_ORG_ID = WH1.ORGANIZATION_ID(+)
AND RTI.INTERFACE_TRANSACTION_ID = PIE.INTERFACE_TRANSACTION_ID(+)
ORDER BY RTI.INTERFACE_TRANSACTION_ID;
3.Error가 발생한 Internal Requisition receipts의 추가 정보를 취합하는
script:
SELECT RTI.RECEIPT_SOURCE_CODE "Receipt Source Code",
RTI.REQUISITION_LINE_ID "Intf Req Line Id",
RTI.SHIPMENT_HEADER_ID "Ship Hdr Id",
RTI.SHIPMENT_LINE_ID "Ship Line Id",
RTI.ITEM_ID "Item Id",
RTI.QUANTITY "Intf Qty",
RTI.UNIT_OF_MEASURE "UOM",
RTI.FROM_ORGANIZATION_ID "From Org Id",
RTI.TO_ORGANIZATION_ID "To Org id",
PRH.REQUISITION_HEADER_ID "Req Hdr Id",
PRH.SEGMENT1 "Req Num",
PRL.REQUISITION_LINE_ID "Req Line Id",
NVL(PRL.QUANTITY_DELIVERED,0) "Qty Delv",
NVL(PRL.QUANTITY_CANCELLED,0) "Qty Canc",
PRL.QUANTITY "Qty Ordered",
PRL.QUANTITY - (nvl(PRL.QUANTITY_CANCELLED,0) +
NVL(PRL.QUANTITY_DELIVERED,0))"Qty Remaining",
PRL.SOURCE_TYPE_CODE "Source Type",
PRH.TRANSFERRED_TO_OE_FLAG "XFR to OE Flag",
NVL(PRL.CANCEL_FLAG,'N') "Cancelled",
NVL(PRL.CLOSED_CODE,'OPEN') "Closed Code",
LIN.LINE_ID "ISO Line Id",
NVL(LIN.ORDERED_QUANTITY,0) "ISO Line Qty",
NVL(LIN.SHIPPED_QUANTITY,0) "ISO Ship Qty",
NVL(FULFILLED_QUANTITY,0) "ISO Fulfilled Qty",
NVL(LIN.CANCELLED_QUANTITY,0) "ISO Cancelled Qty",
NVL(LIN.OPEN_FLAG,'N') "ISO Line Open",
NVL(LIN.BOOKED_FLAG,'N') "ISO Line Booked",
NVL(LIN.CANCELLED_FLAG,'N') "ISO Line Cancelled",
OOH.ORDER_NUMBER "ISO Order Number",
PIE.COLUMN_NAME "Intf Column",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
PO_REQUISITION_HEADERS_ALL PRH,
PO_REQUISITION_LINES_ALL PRL,
PO_INTERFACE_ERRORS PIE,
OE_ORDER_LINES_ALL LIN,
OE_ORDER_HEADERS_ALL OOH
WHERE PRL.REQUISITION_HEADER_ID = PRH.REQUISITION_HEADER_ID
AND RTI.REQUISITION_LINE_ID = PRL.REQUISITION_LINE_ID
AND LIN.SOURCE_DOCUMENT_ID = PRH.REQUISITION_HEADER_ID
AND LIN.SOURCE_DOCUMENT_LINE_ID = PRL.REQUISITION_LINE_ID
AND LIN.SOURCE_DOCUMENT_TYPE_ID = 10 --Internal Requisition
AND OOH.HEADER_ID = LIN.HEADER_ID
AND PIE.INTERFACE_TRANSACTION_ID(+) = RTI.INTERFACE_TRANSACTION_ID
ORDER by PRH.SEGMENT1;
Reference Documents
Note 263368.1

Any suggestion/advise please!
Thanks,
Genoo

SRM-EBP: How to delete multiple entries in table BBP_DOCUMENT_TAB easier?

We are running SRM 4.0 EBP on classic scenario. I want to delete entries in table BBP_DOCUMENT_TAB easier and faster using FM BBP_DELETE_FROM_DOCUMENT_TAB. Is there a standard program that calls this FM so that inputting the entries will be faster? I see only CLEAN_REQREQ_UP but does not serve the purpose. If none, how can I develop a program to achieve this? Please help SRM Consultants.

Hi,
Please check note 535765, in it there is a special report that deletes entries from this table.
I hope this helps,
Kind Regards,
Lisa

Iphone 6 plus struck in recovery mode after update to 8.1

iphone 6 plus struck in recovery mode after update to 8.1
i updated my iphone 6 plus to 8.1 from 8.0.1 and its struck in recovery mode. inspite of restoring it again and again i get error 53.. im struck in the recovery loo. kindly help me..

Hello arunmuthuvel,
The article linked below details a whole host of information and a number of troubleshooting steps that can help get your iPhone restored.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/en-us/HT201210
Cheers,
Allen

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

3 Messages getting struck in SMQ2 at same time with difference in seconds

Hi all,
Three EOIO messages with Queue name QBTJ.......................(same Queue id for 3days)
that is day1 QBTJ(message (a) queue id=day2 QBTJ queue id=day3 QBTJ queue id
day1 QBTJ(message (b) queue id=day2 QBTJ queue id=day3 QBTJ queue id
day1 QBTJ(message (c) queue id=day2 QBTJ queue id=day3 QBTJ queue id
.These are getting struck in smq2 at same times (compared the timings 3 days).the time at which these messages are getting struck are same with the difference in seconds.
Other than these 3 different times ,these messages are moving with out strucking in SMQ2.
I have two questions here
1)what could be the reason for only these three messages are getting struck in smq2
2)is there any parameter which could be set in SXMB_ABMIN to unlock the queue automatically with out going to smq2 and manually unlocking.
Please do not send nonrelavent blogs
Thanks,
Srinivasa

Hello,
you can schedule the report RSQIWKEX in your XI system. This report does automatically unlock all queues.
See the blog for more details.
regards,
Björn

Screen output without connection to user, Message struck at inbound queue

Chaps,
I executed inbound proxy form PI 7.0, the message was struck in the inbound queue of ECC 6.0,
with status text "Screen output without connection to user" then when I apply execute LUW then it is converted to
"ThiSend:bad tm type /connection closed (no data)".
when i test the same message from 'SPROXY' t.code, inbound proxy class was working fine.
I came to know that when we call an ABAP program in side a proxy then it will throw same error what I got by checking the below url
Message struck at inbound que in server proxy
But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
am I missing any basic things? please guide.

But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
I too believe ..
because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
It is saying not suggestable...!!!! BAPI calls work perfectly !1
In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
am I missing any basic things? please guide.
Seems so,
Lets try below things..
1. Plz check the user is having auth to run the executable program in ECC.
2. It seems that you are not using the proxy structures in a correct way..and check the calling program also..!!
Edited by: Santosh Rawat on Jul 30, 2009 1:12 PM

Queue is getting struck for every delta change in CRM 5.0

Hi Middleware gurus,
The queues are getting struck with status 'READY' for each of these following scenarios:
1. Individual new sales order upload from CRM to R/3 (CRM - SMQ1)
2. Individual sales order delta changes upload from CRM to R/3 (CRM - SMQ1)
3. Individual new materials donloaded into CRM from R/3 (CRM - SMQ1)
4. Material delta change download from R/3 to CRM (CRM - SMQ2)
5. Knowledgebase delta changes download from R/3 to CRM (CRM - SMQ2)
I have to manually release the queue everytime, so that the changes can be uploaded. Am I missing something?
By the way individual new sales order created in R/3 and delta changes on R/3 orders are getting replicated into CRM without any problem.
Thanks,
Kishore

Hi Kishore,
We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
Award points, if the issue is solved
Cheers,
Paul Kondaveeti

Control File and SPFILE Autobackup command struck

O.S Version:
Linux Version "Red Hat Enterprise Linux Server release 6.2 (Santiago)
Linux version 2.6.32-220.13.1.el6.x86_64 ([email protected]) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Thu Mar 29 11:46:40 EDT 2012
2.6.18-308.16.1.el5 x86_64
Tape Archiver : HP Data Protector
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Problem :
In one of our environment, OEM grid 11g scheduled Level 0 backup struck at the Control File and SPFILE Autobackup.
RMAN Script:
run {
2> backup format '<%d_%s:%t:%p:%f>.df' incremental level 0 cumulative database;
3> sql 'alter system archive log current';
4> backup format '<%d_%s:%t:%p>.al' archivelog all not backed up;
5> }
RMAN Configuration
RMAN> show all;
RMAN configuration parameters for database with db_unique_name TestDB are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 45 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO 'TestDB_%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'TestDB_%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' PARMS 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=TestDB,OB2BARLIST=Siv_ORA_TESTSrvr1_TestDB_DB,OB2BARHOSTNAME=TESTSrvr1)';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+DG_TestDB_UAT_DATA_01/TestDB/TEMPFILE/snapcf_TestDB.f';
RMAN Log:
1.    Backup started at 07-SEP-2013 07:09:46
     Finished backup at 07-SEP-2013 07:16:38
Wherein the Control file backup started at 07-SEP-2013 07:16:38 failed at 09/07/2013 12:44:38. It kept struck for 5 Hours.
Starting backup at 07-SEP-2013 07:09:46
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=250 instance=TestDB device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protector A.06.20/370
allocated channel: ORA_SBT_TAPE_2
Finished backup at 07-SEP-2013 07:16:38
Starting Control File and SPFILE Autobackup at 07-SEP-2013 07:16:38
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_SBT_TAPE_1 channel at 09/07/2013 12:44:38
ORA-19506: failed to create sequential file, name="TestDB_c-2078060264-20130907-ff", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
   Vendor specific error: Cannot find requested element ERR(-2)
ORACLE error from recovery catalog database: ORA-03113: end-of-file on communication channel
Process ID: 2045
Session ID: 89 Serial number: 36509
RMAN> delete noprompt archivelog all backed up 1 times to sbt;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 09/07/2013 13:00:07
RMAN-06004: ORACLE error from recovery catalog database: ORA-03114: not connected to ORACLE
RMAN> **end-of-file**
Why does the RMAN Backup struck at Controlfile , SPFile autobackup?

Hello;
I believe the issue is caused by your media management software. You should contact your media management vendor.
Try the same operation to disk and I bet it works.
Best Regards
mseberg

Data struck up in ALE inbox

Hi,
While tried to load Masterdata from ECC, Data struck-up in ALE inbox E1RSSH -> E1RSHIE and it is popping up with a error in process monitoring that 21,35 and 65 node id's are missing. PLease help me out with process of eliminating those records and load the data into Info object.

Hi,
Is the job in source system still active. Job name BI_reqnumber
Also check SM66 in both BW and source system. If you are loading hierarchy it generally takse time to load it.
Regards,
Pravin
Edited by: Pravin Karkhanis on May 28, 2010 3:19 AM

BPM scenario,message struck in queue.

Hi folks,
I am doing a Simple file to file BPM scenario(NO TRANSFORMATION)...
My scenario executed properly,but in moni i receive a green flag, after i looked it in
LUW -->Display Process, I can see the steps as
Receive1--initialize-send1-UNDEFINEDWork flow completed.
I think there is a problem after send.... can u plz tell me what may be the reason.
Or Am i doing in creating a IP,..... if so can u give me a simple file to file scenario,with detailed steps

Yes i have checked everything,
Status code of IP is 0 in sxi_cache-->IP
and interfaces are assigned properly at right places......
Still the message gt struck in queue...
I have a doubt,that why The Unsefined step is coming after send1....
RECEIVE1>INITIALIZE>SEND1>UNDEFINED-STEP>COMPLETED

Data in BBP_DOCUMENT_TAB are not getting deleted

Hi All,
We are in SRM 4.0.
Since today morning whenever a user trying to create / change shopping cart, PO, GR it got updated in the BBP_DOCUMENT_TAB. But it is not getting deleted automatically. Earlier it used to get deleted automatically once the documents have been ordered.
But I could see the POs and GRs have been transfered to the back end system.
Job CLEAN_REQREQ_UP is running every 2 mts.
Please advise.

Hi Arun,
note 338985 describes in detail how the the status of the document(s), CLEAN_REQREQ_UP and the IDOCs interact.
If the documents are posted without any error i.e. there´s everything perfect but the 'obsolete' entries in BBP_DOCUMENT_TAB, then this sounds like a malfunction.
Maybe you should debug the the cleaner with one document and see whats happening starting at the following spot:
CLEAN_REQREQ_UP
process selected entries: check existence of follow on documents,
update if necessary local documents etc. (depends on entry type)
        LOOP AT selarea.
          IF still_to_proc = c_proc_block_size.
            SET UPDATE TASK LOCAL.
          ENDIF.
lateron the entries are deleted in function module BBP_DELETE_FROM_DOCUMENT_TAB
Note 535765 describes how to delete entries via a Z* report but I would NOT RECOMMEND to do that without having checked the situation by SAP before.
see note 535765:
Please note!:
Deleting relevant entries from the BBP_DOCUMENT_TAB may cause severe
problems, as the system needs the entries to set the right status to
shopping carts, invoices and confirmations. So please be careful with
the deletion of entries.
Kind Regards
Michael

Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.

Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.

You'd need an app like Skype to video call with other phones.
Data transfer is not supported via bluetooth and iphone to iphone is not supported at all.

Inbound Messages are struck in Queue.-Production environment of client box.

Dear All,
We have scheduled a Job(RSQIWKEX) to process messages in Inbound Queue. we are facing probem after restarting the XI server that the messages are struck in Queue and scheduled job also not getting executed. Even manually also not able to process the messages.
Could anyone help as how to proceed or what could be the cause of this problem.
Regards,
Siva

What is the error message?

PO struck in BBP_DOCUMENT_TAB

Similar Messages

Maybe you are looking for