PO to supplier using external send option email (to multiple addresses)

Hello All,
We have activated PO external send option for our client but they want that PO should be sent to more than one ID of the supplier and it seems that is not possible by maintaining multiple addresses in Vendor Master's Address view as system only picks one having indicator ticked, also system does not allow to tick it for more than one address. Please let me know if it is possible using standard function to send PO email to more than one address.
I need to know if there is any standard way of doing this w/o using any development or ABAP work.
Also has anybody tried using disctribution list SO15 if it is possible?
Please help we are at Go live.
Regards
Anjan
Edited by: Anjan Dubey on Aug 12, 2009 10:28 AM

Hi,
From my opinion, it's impossible of the standard function in SAP system, so:
Firstly you need to confirm with your buyers, whether they really require to send the information to multiple addresses, maybe they can send the information to one contact person on vendor side, then the contact person can forward the email to other relevant people;
If have to do it, you need to develope an ABAP background job to do it!
Hope you can solve the problem!
Good luck
Tao

Similar Messages

How do I send an email to multiple addresses?

How do I sed an email to multiple addresses?

Use the BCC field that is enabled through the View or Edit menu. This will ensure you don't put everyone on a spammers list, should one of your recipients have a virus that feeds addresses to spammers.

How can I send an email to multiple addresses for one recipient?

I would like to send to recipient who has an "additional" email acccount, that is to both of his accounts.

Did you manage to read the article I linked to in the last post?
Enter the address manually.
Just press enter after the first address and you get a field for another address Your choice of fields so you can use it as if they are '''To:''' two separate individual recipients, or use a primary address and a '''CC''' field, the arrowhead allows you to choose.

Sending email to multiple address using Utl_Smtp

Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause:    A SMTP permanent error occurred.
*Action:   Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected]                         U1
[email protected]                         U2
[email protected]                         U3
[email protected];[email protected];[email protected]     U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected]     U1
[email protected]     U2
[email protected]     U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank you

Simple Mail Transfer Protocol RFC 5321 specifications.
      RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
   The first or only argument to this command includes a forward-path
   (normally a mailbox and domain, always surrounded by ">" and "<"
   brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb.

How can i send a email to multiple people on my ipad2 using the contact and group list downloaded from my iMac. Thank you

I am 63 yrs old and not to computer literate. I know how to send an email to multiple people using my contact list and groups on my IMAC. I tried using a group name downloaded to my Ipad2 from my IMac. It does not work. If I choose a single email address it works. Any idea what I am doing wrong?
Thank you for your paitence and help.
Steve

You are not doing anything wrong. The feature that you need is totally lacking in the built in Mail app on the iPad.
There are a couple of third party mail apps that will let you do this ... MailShot and Group Email with Attachments. You can check them out in the App Store.

Using the send by Email for Review function

We are using Adobe Acrobat 8 and would like to use the send by Email for Review function. We would like to modify the text for the invitation message but don't want to have to modify it every time we use the function. Does anybody know any way that we can modify the message so that it would be the same message every time it is used?

Hi Christine,
I know it's not the answer you want, but signatures have to be added in a serial manner. Every time you sign the PDF file you are signing everything that came before the signature was created, and this includes the previous signatures. There is no method to combine signatures from multiple files into one file. You would end up creating a signature over data that wasn't there when the signature was originally created, and in the security world that's a no-no.
Steve

HT5312 I forget answers to security questions,on the other hand rescue email address that Apple use to send me email is not correst,how I can reset security questions or change rescue email ?

I forget answers to security question , on the other hand rescue email address that Apple use to send me email is not correct , how I can reset security questions or change and make correction for rescue email address ?
Please send me answer to [email protected] or [email protected]
Thank you

You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(87669)

My email account has been hacked and my address book has been used to send unsolicitated emails to all my contacts, how can I stop this activity

My email account has been hacked and my address book has been used to send unsolicitated emails to all my contacts.

First of all
Run windows in safe mode (with network) and change your password on your email account.
Then
run several anti-malware programs (there are many free ones, but not all are trustworthy)
Malwarebyte >> http://www.malwarebytes.org/mbam.php
Microsoft Safety Scanner >> http://www.microsoft.com/security/scanner/en-us/default.aspx
Windows Defender >> http://windows.microsoft.com/en-us/windows/using-defender
Spybot >> http://www.safer-networking.org/en/index.html
Kasperky >> http://www.kaspersky.com/security-scan
Rootkit scanner TDSS-Killer >> http://support.kaspersky.com/5350
And when all is clean, change password for your email account again.

How to use Add_Delivery_Option to send an email to multiple recipients

I have the following code before i submit a concurrent request:
B_Delivery_Success := Fnd_Request.Add_Delivery_Option(
'E',                    -- EMAIL
'Enter subject', -- SUBJECT
'[email protected]',          -- FROM
'[email protected]'          -- TO
,NULL               -- CC
which correctly sends an email with attachment. However i need to send the email to multiple recipients. How can you enter multiple names against the 'TO' parameter. I know that i can repeat this again and again with a different email address each time, however there must be away to use this code once with multiple addresses?
Edited by: user974582 on 09-Oct-2012 01:23

Not sure about the API but there are other ways to achieve it i.e. through alerts.. You can refer below
Can Concurrent Request Notifications Work With A Group Email ID [ID 1096850.1]
Cheers,
ND

Frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through m

I guess I was not clear.....my fault....let me re-phrase: frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through my list of contacts and quickly select those contacts that I want to receive that particular email....thx

You need an app that allows group messaging. Enter group messenger in the search bar in the app store.

Invalid Certificate Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be used to send from your e-mail address.

Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~Dan

Hi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Purchase order through External Send to include a CC address

Does anyone have any idea how to get the e-mail of a purchase order sent through External Send to include a CC address in the e-mail?
I have searched the forum and found a few questions regarding sending a purchase order to more than 1 e-mail address using external send, but not solutions.
We have got this working to send to the vendor, but the purchasing manager won't use it until we are able to cc the purchaser into the mail. This is to allow the purchaser to keep track on what has been sent. It seems like an obvious thing to want to do. Is it possible in standard SAP? If not, where should I start to get this to work? Is there a customer exit or another area of code somewhere that I can change to trigger a second e-mail. Alternatively can I run this through workflow somehow?
Any suggestions will be greatfully received and rewarded.
Thank you
Karen

The vendor e-mail address is picked up from the master data and the purchaser's e-mail would be picked up from their user account. The problem is that I don't know at what stage in the program SAPFM06P, used for sending the purchase order, I could set up the distribution list.
If I set the vendor address to name.address@somewhere; name2.address@somewhere else this works and both name and name2 receive the e-mail. But it would mean the purchasers ammending the vendor e-mail address each time, which just isn't practical.
I probably should have said that I'm using SAP version 46c and the e-mail is sent using standard SAP settings for 5-External send using program SAPFM06P and form MEDRUCK.
Thanks for the advice
Karen
Message was edited by: Karen Dean

TS3899 If I send an email to multiple recipients, I cannot open the individual replies on iphone

If I send an email to multiple recipients, I cannot open the individual replies. I can see there are a few replies but have to go to webmail to see them.
Any ideas anyone?

...and even email addresses can be hidden by sending to each recipient using your mail client's "bcc" or "blind copy" field instead of the "to" field.

How do I send an email with blind address recipients?

How do I send an email with blind address recipients?

When you open a New Message there's a little box with three lines next to the Subject Box. When you click it you get a drop down menu with a list of options. Click on Bcc Address Field. That will add a BCC box to your message.

Can you send an email with multiple photos from iPhoto in reduced size?

I want to send an email with multiple photos attached with a reduced size. How do I accomplish this?

Hi Igmatteson,
If you are using regular Mac Mail, and you are on Mountain Lion, this is what I can do:
1. Go into Mail, and start a new message
2. At the top, you will see 4 icons - the third one over brings up the Photo Browser from iPhoto
3. Go through your pics and select the one you want and drag it onto the mail page
4. Once you have done that, a small bar on the right-hand side will show up that will allow you to select whether you want the image size to be small, medium, or large. Once you select a size, all photos you add will be that same size.
Hope this works for you!
Cheers,
GB

PO to supplier using external send option email (to multiple addresses)

Similar Messages

Maybe you are looking for