Podcasts Can't Be Found

Podcasts are randomly deleted from my computer from time to time. All of my settings tell iTunes to "never delete old podcasts," but every week, something else will show up in the list with the exclamation point next to it, proclaiming the podcast has disappeared. The missing podcasts are not in my recycle bin, and they are not in the original podcast folder. Anyone else experiencing this problem? I've looked through the forums, but the only advice I can find is "make sure to check the box that says 'never delete podcasts'." This box has been checked, and they're still disappearing. (Note: they're still listed in iTunes, but the file can't be found).

Same problem here, no clue on how to stop this happening yet, it appears to happen randomly on any of the podcasts at any time. And normally only just after i sync my iphone.

Similar Messages

My podcast can't be found by searching

Hey
I have just uploaded my feed to iTunes but i cant find it when i search. I'm using FeedBurner to create my feed from a blogger page, I have filled out the search keywords in the Smart Cast settings but I'm having no luck finding it on iTunes
Please help me!!!
Windows XP Pro

My podcast has been up since Monday (four days) and is not searchable. This problem appears in many posts on this forum, and no-one seems to be able to answer it, apart from those who advise it takes some few hours to become searchable. This is true, but not the cause of my problem, or that of others whose podcasts have been up for some time.
Email to apple iTunes customer service recommends asking on the iTunes site for the podcast, and email to the site goes unanswered.
Odd that NO-ONE can address this problem.

I recently tried to burn some photos to a disc. It did not work, but then I ended up with a .fpbf folder on my desktop. Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.

Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore...

The operation can't be completed because one or more required items can't be found. (Error code -43)

When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

I get an error -36.
I did the dot_clean in the terminal.
Did not fix it.

IPhone: Required Disc Can't be Found

Now it can't sync music because the "required disc can't be found" Is this part of the new itunes version? It always synced ok before. Where can I find the required disc??

Just to complete the thread... I had the iPhone connected to a USB hub and apparently iTunes and the iPhone were not making the connection. I moved the USB plug to the computer and everythings back to normal... The 'required disc' must have been the iPhone searching for the hard drive on the G5.

SharePoint 2013 "Help Menu" not working (Sorry, the page you're looking for can't be found)

The Built in SharePoint 2013 Help Menu (?) on our Enterprise Farm for both the sites and Central
Admin does not work.
On Central Admin help the error comes back as: "Sorry, the page you're looking for can't be found".
The site collections Help menu gets the error :
"Unfortunately, help seems to be broken...
There aren't any help collections in the current language for the site you're using."
We have installed on all servers in the farm:
December 9, 2014 Cumulative Update for SharePoint Server 2013 package (build 15.0.4675.1000)
as well as the latest SharePoint update KB2768001 1/15/2013.
I have checked:
Get-SPHelpCollection
Title
Name
SharePoint Help
WSSEndUser.1033.15
SharePoint Foundation 2010
WSSEndUser.1033.12
Central Administration Help
WSSCentralAdmin.1033.15
SharePoint Server 2010
OSSEndUser.1033.12
SharePoint Help
OSSEndUser.1033.15
SharePoint Foundation 2010 Central Administration
WSSCentralAdmin.1033.12
Teacher Help
EDUTEACHER.1033.15
Central Administration Help
OSSCentralAdmin.1033.15
Student Help
EDUSTUDENT.1033.15
SharePoint Server 2010 Central Administration
OSSCentralAdmin.1033.12
PerformancePoint Dashboard Designer 2010 Help and How-to
DashboardDesigner.1033.12
The URL for the site collections is https://servername...../_layouts/15/help.aspx?Lcid=1033&Key=HelpHome&ShowNav=true
We are only using Default English (US) language packs.
In the directory of
Directory of C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\HCCab\1033
there are cab files.
There are no pending upgrades on any SharePoint or SQL server, all other SharePoint components are working
normally.
Any ideas or suggestions?
Thanks.
John


I'm interested in getting the local help to work while this is offline, I saw the following in an article, did you do this and it still does not work for you?
"However the help won’t show up in
SharePoint 2013 sites. You need to change the Help Collection item property SharePoint
Version to15 to
make it work."

The operation can't be completed because the original item ".." can't be found. Need a fix!

Ok. This is my first and hopefully only discussion ever! Thanks in advance for all the help.
I had set up my network and this was all working fine for months. Time Machine did proper back ups and I could store files on the drive as well over the network. Not sure how, or exactly when this error began. It may have had something to do with the upgrade to Mavericks.
But I can see the drive when I open Finder (which I have named Airport) can then access the directories but will not load any of the files. If the Finder window is closed and I try to access the external drive again via the network, I am prompted with.."The operation can't be completed because the original item ".(Airport)." can't be found. Also of note...there is no "eject" option beside the name of the drive.
I have found only one solution that was dated in 2008 where someone was deleting volumes from their machine and the instructions were not quite clear, so I'm hoping for some new insight on this issue. Honestly, I just didn't understand how to do what he said...several have asked him to elaborate but no further explanations and all other links are now dead. It seems this is a common issue. I'm aware many people will read this and want to say..."i Have this problem too, when im doing something with windows and other computers..." There are many solutions for these situations that I have found....but no recent ones for those with ONLY one drive and an airport extreme running only Apple computers. So guys, lets try to keep this thread for one topic only. Hopefully a quick and helpful thread with a few replies and some step by step directions to solve everyones toubles.
I even had my router replaced and still the same issue. Also, the hard drive works perfectly when hardwired to my computer. So the issue must lay within the settings of my MacBook Pro, OS X 10.9.1. If you feel I should provide any other information I would be happy to do so!

Lexvo,
Thanks for the input. I had to look up what SMB stood for, server message block? So I'm assuming this is not something I'm using.
Also, this is not a "sometimes" problem. This is a consistent and reproducible issue.
As far as an update...I dont see an OS update fixing my issue unless something is overwritten, but maybe not.
I think a good point to consider and open to discussion is why does logging in as a root user solve the issue? What can be done or manipulated to allow functionality with my regular login info versus a root user?

The operation can't be completed because the original item for " your drive name here " can't be found

Hey all,
I hope someone can help. I am running 10.7.5 OSX currently on my Mac Book Pro. I recently got a new Windows 8 desktop. A ceap one running Windows 8. I currently have 5 drives shared over my home network. 3 are working just fine (the 3 I just put on the network today). The other 2, however, were previously on my old Windows Vista computer also shared over my network. My Mac Book Pro had access just fine (I set up sharing on my vista comp) and everything ran smooth. Today when I hooked up my new Windows 8 computer and put the 5 drives on and shared them via my network, same way as I done before, 3 are working fine but the two original drives give me an error when I try and access them from my Mac over my home network. They both show up with the correct names but when I try and access them it tells me:
The operation can’t be completed because the original item for “M&V” can’t be found.
M&V is the name of one of the drives. Here is the trouble shooting I have done:
- Renamed the drives multiple times
- Tripple checked my permissions
- Checked for updates and installed both on my PC and Mac
- Restarted my PC and Mac
- Tried Both of my dual frequencies on my netowork
- Tried hooking up with ethernet cable
- Changed the user name and password for my shared access on my PC multiple times and put in the correct info on my Mac
- Tried taking away all passwords (unsecured)
- My other Windows PS's can access all drives just fine
But still I get the above error. I have isolated it to an issue with my Mac. I was thinking maybe if there is a way to have my Mac forget the shared drives and I can re-add them and put in my password, I am not sure if that is even possible. I am at al loss on what to do. Any help you can give would be greatly appreciated.

I am having the same exact issue and I've been busting my testi-balls to figure it out. I've got 15 years experience in the computer game and still can't figure it out. I see a lot of people having similiar issues, but no one seems to have an answer for MY issue, which is virtually the same as the OP.
Brand new Macbook Retina.
Windows 7 x64 Machine.
ALL drives shared with ALL permissions of ALL accounts manually inserted on the Windows 7 side.
ALL other PC's in the house can access the drives on the Windows 7 machine without issue.
Only the Macbook Retina has the problem connecting. Every Windows drive I shared is visible under "network" in finder, but when I click on any of them it gives the quoted error message the OP stated.
PLEASE, if anyone finds a fix for this, let us know!

I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

Time Capsule "can't be found" as a hard disk in Snow Leopard

I've had a Time Capsule for a year and a half. No problems until I installed Snow Leopard.
Time Machine seems to work fine, my backups proceed regularly, but if I try to actually mount the hard disk and upload or download files from the drive, I can't. The path "My Computer/Network/Time Capsule" shows up in a Finder window, but when I click on the icon for the Time Capsule drive, it says "The alias 'My Time Capsule' can't be opened because the original item can't be found." I can "Delete Alias", "Fix Alias..." or "OK".
Clicking on Fix Alias leads to the file selector dialog box. If I select the drive, it claims that it is already connected. So the only available option in the dialog box is "cancel".
Clicking on Delete Alias gives the error message "The item 'My Time Capsule' can't be moved to the Trash because it can't be deleted."
Clicking on OK, naturally, accomplishes nothing.
I tried going to Disk Utility and repairing disk permissions and rebooting. Nada.
I tried connecting directly to the Time Capsule via ethernet. Didn't make a difference.
Help!!!

I'm having the same problem. Internet connection is fine; backups work correctly. But I get a message telling me there's an update I should install for Time Capsule, and when I click to install it, it tells me it can't find the hard drive.
I also can't print, although my printer driver is installed and the image of the printer appears. My printer is connected to the Time Capsule.

When i got a new PC and transferred ITunes, when i tried to sync my 3G nano, it keeps saying 100 files can't be found and I can't get my checked songs to sync. Is it a problem with software or my ipod or ??? I am leaving on a long trip in a week

When I got my new computer and transferred I tunes my songs in my play list play on my computer, but when I try to sync to my 3g Ipod, it only syncs a few albums and gives me a message that 100 song files can't be found. So only half of what I want is on my Ipod. I leave on a long trip now and really need the Ipod full of my music. I've tried reloading some CDs and replacing the old ones on there, but still they won't sync. What do I do?

You need to copy everything from the old computer or your backup copy of your old computer to the new one.
The iphone will sync itunes content and pics with one and only one computer at a time. If you sync to another, then it will erase the current content from the iphone and replace with content from the new computer.
The music sync is one - way -computer to iphone. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
If you sync contacts and calendars to a blank computer, then they will be erased as well.
Copy everything from the old computer.

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to sync my iPhoto to my iPad from my Mac but iTunes keeps telling me that my iPhoto Library can't be found.

I am trying to sync my iPhoto to my iPad from my Mac but iTunes keeps telling me that my iPhoto Library can't be found. I obviously can see that I have many photos and events so I am not sure why I'm getting this message.I have all the current software and have been playing around with it for hours and can't figure out the problem. Any help would be greatly appreciated.

im having the same problem!

Long running reports end successfully - present s "page can not be found"

Long running reports and browser timeouts - page can not be found"
We are launching Oracle 9i Reports from a Portal 9ias (release 9.0.2.2) system. We are in production with about 100 users. It is not going well with respect to Report problems.
We have the following problems:
1) hanging reports,
2) reports where parameter screens will not present due to large LOV on parameter screen,
3) and the most aggravating problem is "Page can not be found" presented to user when in fact the report ran successfully and create a .pdf.
We are at our wits end with Oracle Support and the Oracle Portal and Reports product.
As I said, I am launching Oracle Reports 9i from a Portal 9.0.2.2 application. I have several long running reports that complete successfully but return to the user an error "Page can not be found". Meta-link Note: 189454.1 suggests a modification to ReceiveTimeout parameter in the pc registry. We set the ReceiveTimeout parameter to 7200000. This did not solve the problem. Users still receive "Page can not be found".
Is there a report server side setting that we must set also ... or some other setting we should check?
I need to solve this issue. Is there someone out there that can help? Are there other people having similar Oracle Reports issues? According to Oracle Support we are the only people with these issues. Are we?

1) If you can reproduce the Reports Hanging issue consistently you can push Oracle Support to file a bug.
2) I am not sure about this now, but again you can take this to Oracle Support and push for resolution.
3) There are some problems with IE - Adobe integration. This is not a Reports bug. You can try
(a) Switching off Adobe - web integration in Adobe Acrobat reader settings, so that Adobe will not automatically open pdf file in web. Instead a dialog will be shown as to which application to open the pdf file or save it to disk and user can save the file to disk and open.
(b) Use IE latest version. (or some other browser like Netscape )
[ You can roll back the ReceiveTimeout param change you made to see the impacts one at a time ]
1) To confirm that this is a Adobe - IE pdf problem run the same report to htmlcss, rtf. If these come fine, then we can ascertain that this is Adobe - IE issue.
2) Give http://host:port/reports/rwservlet/showjobs?server=server_name. You can see all the jobs and their jobids. For the concerned jobs you can click and see whether output is actually generated or not.
Thanks
The Oracle Reports Team
The statements and opinions expressed here are my own and not that of my employer

My itunes will not start in Win XP. I get an error that says MSVCR80.dll can't be found. I am scared if I just reinstall iTunes that I will lose all my music and apps that are in the old itunes. What can I do.

My iTunes will not start in Win XP. I am getting an error that says MSVCR80.dll can't be found. I am concerned that if I just do a reinstall
of iTunes it will overwrite or delete all the music and apps I have on the current app that won't start. When I boot the PC I get the following:
APSDaemon.exe - unable to locate. MSVCR80.dll not found. Reinstalling application may fix this problem. How can I get iTunes started without losing
all my music and apps? Thanks

It won't unless a problem occurs. Back them up, uninstall iTunes and all related components, and reinstall them.
(100013)

Podcasts Can't Be Found

Similar Messages

Maybe you are looking for