Pool creation issues

Environment:
2 RD Web Access servers 2012 R2
2 RD Connection Brokers 2012 R2 (who are also RD Licensing servers)
6 RD Virtualization Hosts 2012 R2
When creating a new pool from a newly created master image (sysprep done), I am getting a bunch of the same error message on the RD Virtualization Host and after around two hours the creation of the pool fails with message:
"Failed: The virtual machine is not ready for the virtual machine-based desktop deployment."
The error messages on the RDVH all say:
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Remote Desktop Virtualization Host failed to set zeroconfig information from the virtual machine [vm-name]
Hresult: 0x800706D9
Creating a new pool from an old master image works fine.
Can someone clarify the meaning of this error please?

Hi,
Accroding to the error message "Remote Desktop Virtualization Host failed to set zeroconfig information from the virtual machine", it originally occurres on the template VM and wouldn't allow the creation of the VDI pool. Maybe it is
due to the VM created from the new image is not in the correct status. You can check the status of the VM and make sure it is running.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Dynamic Connection Pool Creation Failing in a cluster

Hi,
I am trying to create a connection pool in a clustered environment. This connection
pool is created lazily behind a Stateless Session Bean. We first attempt to determine
whether, the connection pool exists using JdbcServices.poolExists(someName), and
create it if it does not exist. A failure occurs on creation because it looks
like the connection pool might have been created by a bean on a different weblogic
VM instance. Is there any way to dynamically create a connection pool and make
it visible to the whole cluster? Thanks in advance for any help. Michael Dolbear
Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence of connection pool
Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection pool ContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException: weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
at weblogic.management.internal.Helper.createMBean(Helper.java:376)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
at weblogic.management.internal.Helper.createMBean(Helper.java:383)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
        at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
        at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
        at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
        at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
        at weblogic.management.internal.Helper.createMBean(Helper.java:376)
        at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
        at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
        at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
        at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
        at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
        at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
        at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.java:47
2)
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:727
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:709
at com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.createConne
ctionPool(ConnectionPoolCreator.java:82)
at com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnectionPoo
lIfNonExistent(DataStoreRepository.java:211)
at com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createConnec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.create
ConnectionPoolIfNeeded(Unknown Source)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.getIma
ge(Unknown Source)
at com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unknown
Source)
at java.lang.reflect.Method.invoke(Native Method)
at com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescriptio
n.java:181)
at com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.java:7
9)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.java:
186)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invoke(Ser
viceBean_bjedmi_EOImpl.java:37)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSkel.inv
oke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence of connection
pool Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection pool ContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException: weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
at weblogic.management.internal.Helper.createMBean(Helper.java:376)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
at weblogic.management.internal.Helper.createMBean(Helper.java:383)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
        at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
        at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
        at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
        at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
        at weblogic.management.internal.Helper.createMBean(Helper.java:376)
        at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
        at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
        at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
        at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
        at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
        at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
        at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.java:47
2)
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:727
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:709
at com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.createConne
ctionPool(ConnectionPoolCreator.java:82)
at com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnectionPoo
lIfNonExistent(DataStoreRepository.java:211)
at com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createConnec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.create
ConnectionPoolIfNeeded(Unknown Source)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.getIma
ge(Unknown Source)
at com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unknown
Source)
at java.lang.reflect.Method.invoke(Native Method)
at com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescriptio
n.java:181)
at com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.java:7
9)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.java:
186)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invoke(Ser
viceBean_bjedmi_EOImpl.java:37)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSkel.inv
oke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

The only way to do it is using MBeans. You could search this newsgroup
for "JDBCConnectionPoolMBean" to get an idea of how it could be done.
Slava
P.S. http://search.bea.com/weblogic/gonews
"Mark Mortensen" <[email protected]> wrote in message
news:[email protected]...
>
Slava,
I am working with Mike on this issue and wanted to add some moreclarifications.
We have a two server cluster where one of the EJB's on one of the Managedservers
creates the connection pool. The problem comes in when a request comes tothe
second server in the cluster. The connection pool is created by the firstserver
but it is only assigned to the first server in the targets section on theconsole.
It isn't assigned to the cluster. Is there a way to programmaticallyassign the
pool to the cluster instead of just the server that created the pool?
-Mark
"Michael Dolear" <[email protected]> wrote:
Hi Slava,
Here is what I am doing. The code is spread across a couple of classes.
I am using
what was described in BEA's doc on dynamic connection pool creation.
I didn't
see anything about MBean apis required:
* Dynamically create a connection pool using
aConnectionPoolProperties.
Please
see ConnectionPoolCreator
* for the required properties that must be sent in.
* @param aConnectionPoolProperties
public synchronized void createConnectionPoolIfNonExistent(Properties
aConnectionPoolProperties)
throwsPersistenceFrameworkInitializationException
ConnectionPoolCreator tempPoolCreator;
Pool tempPool;
tempPoolCreator = new ConnectionPoolCreator();
tempPool =tempPoolCreator.getConnectionPool(aConnectionPoolProperties);
if (tempPool == null)
tempPoolCreator.createConnectionPool(aConnectionPoolProperties);
>>
* Create Connection pool given the properties that I have beenconfigured
with
* @return Pool
public Pool createConnectionPool(Properties aConnectionProperties)
throwsPersistenceFrameworkInitializationException
JdbcServices tempServices;
try
tempServices = this.lookupJdbcServices();
tempServices.createPool(aConnectionProperties);
returntempServices.getPool(aConnectionProperties.getProperty(CONNECTION_POOL_NAME)
catch (Exception e)
PersistenceFrameworkUtils.logException(e);
throw newPersistenceFrameworkInitializationException(e.getMessage());
* Answer a connectionPool or null.
* @return Pool
public Pool getConnectionPool(Properties aConnectionProperties)
throwsPersistenceFrameworkInitializationException
JdbcServices tempServices;
try
tempServices = this.lookupJdbcServices();
if (tempServices.poolExists(
aConnectionProperties.getProperty(CONNECTION_POOL_NAME)))
return tempServices.getPool(
aConnectionProperties.getProperty(CONNECTION_POOL_NAME));
else
return null;
catch (Exception e)
PersistenceFrameworkUtils.logException(e);
throw
newPersistenceFrameworkInitializationException(e.getMessage());
"Slava Imeshev" <[email protected]> wrote:
Hi Michael,
Could you show us the code? Without looking at the code
I can only say that JdbcServices.poolExists(someName)
returns true only in case the pool is up and running.
If the connection pool MBean was created but not assigned
a target, subsequent tries to create it would fail.
Regards,
Slava Imeshev
"Michael Dolbear" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am trying to create a connection pool in a clustered environment.This
connection
pool is created lazily behind a Stateless Session Bean. We first
attempt
to determine
whether, the connection pool exists usingJdbcServices.poolExists(someName), and
create it if it does not exist. A failure occurs on creation becauseit
looks
like the connection pool might have been created by a bean on a
different
weblogic
VM instance. Is there any way to dynamically create a connection pooland
make
it visible to the whole cluster? Thanks in advance for any help.
Michael
Dolbear
Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence ofconnection pool
Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection poolContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException:weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
atweblogic.management.internal.Helper.createMBean(Helper.java:383)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at
weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.ja
va
:47
2)
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
727
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
709
at
com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.create
Co
nne
ctionPool(ConnectionPoolCreator.java:82)
at
com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnecti
on
Poo
lIfNonExistent(DataStoreRepository.java:211)
at
com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createC
on
nec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.c
re
ate
ConnectionPoolIfNeeded(Unknown Source)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.g
et
Ima
ge(Unknown Source)
at
com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unk
no
wn
Source)
at java.lang.reflect.Method.invoke(Native Method)
at
com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescr
ip
tio
n.java:181)
at
com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.j
av
a:7
9)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.
ja
va:
186)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invok
e(
Ser
viceBean_bjedmi_EOImpl.java:37)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSke
l.
inv
oke(Unknown Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.ja
va
:93
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence ofconnection
pool Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection poolContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException:weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
atweblogic.management.internal.Helper.createMBean(Helper.java:383)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at
weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.ja
va
:47
2)
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
727
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
709
at
com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.create
Co
nne
ctionPool(ConnectionPoolCreator.java:82)
at
com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnecti
on
Poo
lIfNonExistent(DataStoreRepository.java:211)
at
com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createC
on
nec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.c
re
ate
ConnectionPoolIfNeeded(Unknown Source)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.g
et
Ima
ge(Unknown Source)
at
com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unk
no
wn
Source)
at java.lang.reflect.Method.invoke(Native Method)
at
com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescr
ip
tio
n.java:181)
at
com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.j
av
a:7
9)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.
ja
va:
186)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invok
e(
Ser
viceBean_bjedmi_EOImpl.java:37)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSke
l.
inv
oke(Unknown Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.ja
va
:93
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

10.6.7 - general pdf creation issues?

I wondered whether anyone else had run into this issue after updating to 10.6.7 when using pdfs created by Preview - perhaps related to the pdf/font issue.
If it is generally happening, then the 10.6.7 pdf-font issue has an even larger
impact than previously described:
1. Open a pdf document in Preview
2. Select a region and save to clipboard
3. Save as a new pdf file
4. Then try importing it as a "Picture" into any of the new Office 2011 apps: Word, PPT, etc.
This crashes my office 2011 apps (latest version, 14.02) But NOT any earlier version of Office (2008. etc.), which may not do as much pdf checking.
Before the 10.6.7 upgrade (ie, 10.6.6), this never happened with Office 2011.
Acrobat complains when opening the Preview-created pdfs about 'missing fonts', so I suspect some sort of pdf creation issue.
Any fixes (besides the previously suggested one of downgrading to 10.6.6)
If it's a real bug (not just local to my system), then it's a more far-reaching one than previously described.

rcberwick wrote:
So, 3 different Apple tech support people say they know this problem affects
"multiple applications, including any that deal with pdf files" but that "no fix is
currently in the works"
That is wrong because it only involves OpenType Postscript fonts.
The only solution offered so far is to "downgrade by doing Archive & Install" and
then re-applying each Combo Upgrade, starting with 10.6.3 up to 10.6.6.
You wouldn't have to do that either. That is the point of a Combo update. You only need to apply the one you want. It includes all of the previous updates.

5.1.0 sp11 Connection pool refresh issue, revisited....again...!!!

"Hello,
From reading of these newsgroups I've seen many different manifestations
of what seems to be the same root cause with connection pools and
connections which are refreshed/replaced when found broken. In our
case weblogic server hangs.
Kit: 2xWeblogic 5.1.0 sp11 (not clusterd), Solaris 8,
java 1.3.1_01, 1xoracle 8.1.6, latest JDBC 2.0 drivers from oracle. Each weblogic instance and oracle have their own machines.
We do indeed have a firewall employed to run our subnets, and hence
our weblogic servers and oracle databses are in different DMZ's, but are
allowed to communicate to each other via rules set up on the firewall and
inspection of the logs show no such connections being dropped.
As far as the db is concerned, lookups (no writes) never take more than a few
hundred milliseconds and are then closed and given back to the connection pool
immediately from within the 'finally' block of code, hence hard to see when,if ever, the db is
is closing them due to excessive idle time.
weblogic.jdbc.connectionPool.RecipeDBPool=\
url=jdbc:oracle:thin:@foo:1521:BAA,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=30,\
maxCapacity=50,\
capacityIncrement=1,\

Alkesh wrote:
Hi Joe,
The fix you suggested has been implemented and has been running fine
now for the past 3 days. I'm delighted with the result,Great. Glad to help.
but am concerned as to why this problem wasnt highlighted during our
load-testing phases...It's a possibility that your load-testing didn't present the same sort
of load that your actual runtime does.
Thanks for your time on this.Well sure. We want you successful.
Joe
Alkesh
At 01:52 PM 2/22/2002 +0000, you wrote:
Hi Joe,
Thanks for your reply
Please find attached a copy of the jvm thread dump we got from thelast time
that weblogic blocked upon trying to refresh a broken connection.
We have turned off JIT with the environment settingJAVA_COMPILER=NONE.
FYI hotspot is enabled with '-hotspot', these settings can be foundin the
attached 'startWeblogic.sh'.Hi. I found a serious problem by reading the thread dump:
"ExecuteThread-11" daemon prio=5 tid=0x179d40 nid=0x19 waiting for
monitor entry
[0xeee80000..0xeee819e0]
at java.sql.DriverManager.getConnection(DriverManager.java:144)
- waiting to lock <f8e77ad0> (a java.lang.Class)
at com.akqa.sainsburys.jv_recipe.ejb.session.RecipeBean.getConnection(Re
cipeBean.java:759)
It is important to never call DriverManager methods in a multithreaded
application
such as Weblogic, because these JVM methods are alloverly synchronized
at
the class level. One such method, DriverManager.println(), is called
continuously
by all JDBC drivers as well as the SQLException constructor. If one
server thread
makes a long-lasting or hanging call to DriverManager.getConnection(),
it can halt
all JDBC in the whole JVM including work on other open driver
connections.
Please show me the code for RecipeBean.java, and I will send you an
altered version
that should solve this problem. In fact, I can infer from the thread
dump what is needed.
Change the one method getConnection() to this:
// Make once and re-use a driver instance directly, avoiding
DriverManager
Driver d = (Driver)class.forName("weblogic.jdbc.jts.Driver").newInstance();
public Connection getConnection()
return d.connect("jdbc:weblogic:jts:yourPoolNameHere", null );
Also, change your pool definition. I assume you have
testConnsOnReserve set to true.
(You should). Also, you should change your refresh minutes to
something huge, like
9999999. The refresh is interfering with your online performance and
is unnecessary
if you have testConnsOnReserve set. I recommend:
weblogic.jdbc.connectionPool.RecipeDBPool=\
url=jdbc:oracle:thin:@foo:1521:BAA,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=50,\ <------ note that this should be the
same as max, so all cons are made at startup
maxCapacity=50,\
testTable=dual,\
testConnsOnReserve=true,\
refreshTestMinutes=9999999,\
etc.
Joe
I've also attached some firewall logs around the time of weblogicblocking
(12.09). I could only get screen dumps for you, this may or maynot be
useful.
For the firewall logs use the following legend :-
195.110.64.205 - DNS
172.16.160.195 - host webserver 1 (i.e. what our licenses are boundto)
172.16.160.196 - host webserver 2
172.16.160.220 - website 1
172.16.160.230 - website 2
Thanks
Alkesh
-----Original Message-----
From: Joe [mailto:[email protected]]
Sent: 20 February 2002 22:09
To: [email protected]
Subject: Re: 5.1.0 sp11 Connection pool refresh issue,
revisited....again...!!!
At 02:47 PM 2/20/2002 +0000, you wrote:
Hi Joe,
Please find attached a copy of our thread dumps for the most recentoccasion
that weblogic server has stopped.
Apologies for any misunderstandings with my previous post, it appears to
have been cropped. Full posting below (yes we do have testConnOnReserve and
testTable properties set).
Thanks for your time.sure, but first let's get you running OK. These dumps seem to be
very cryptic, as if you're running a highly optimized JVM that
loses almost all of the Java class references I'd normally see.
Can you run again with a more basic JVM? I am beginning to suspect
the JIT JVM...
Joe
Alkesh
Joseph Weinstein wrote:
Hello,
From reading of these newsgroups I've seen many
different manifestations of what seems to be the sameroot cause with connection pools and connections
which are refreshed/replaced when found broken. In our
case weblogic server hangs.
Kit: Weblogic 5.1.0 sp11 (not clusterd),
Solaris 8, java 1.3.1_01, oracle 8.1.6,
latest JDBC 2.0 drivers from oracle.
We do indeed have a firewall employed to run our subnets,
and hence our weblogic servers and oracle databses are
in different DMZ's, but are allowed to communicate to each
other via rules set up on the firewall and inspection of
the logs show no such connections being dropped.
As far as the db is concerned, lookups (no writes) never
take more than a few hundred milliseconds and are then
closed and given back to the connection pool immediately
from within the 'finally' block of code, hence hard to
see when,if ever, the db is is closing them due to excessive idle time.
weblogic.jdbc.connectionPool.RecipeDBPool=\
url=jdbc:oracle:thin:@foo:1521:BAA,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=30,\
maxCapacity=50,\
capacityIncrement=1,\
allowShrinking=false,\
testTable=dual,\
testConnsOnReserve=true,\
shrinkPeriodMins=1,\
refreshTestMinutes=10,\ // has been 1 and 5 but 10 'more' stable.
Fequently however, connections are found to be broken
(either by periodical refresh - refreshTestMinutes or
testing connection before granting it to the
application - testConnsOnReserve=true), this has been
confirmed by viewing JDBC.log .
When this is so, weblogic attempts to replace these
broken connections with new ones and then proceeds
to grant it to the application. Once in a while however
(and by no means 'x' refreshes later), weblogic will not
come back.
One of 2 errors occur in our deployment which cuase weblogic
to refresh a connection.
<JDBC Pool RecipeDBPool> java.sql.SQLException: No more data to read fromsocket
and
<JDBC Pool RecipeDBPool> java.sql.SQLException: Io exception: Broken pipe
I believe these settings to all be correct, JDBC drivers
in the correct point BEFORE weblogic.aux in classpath, yet
still have the issue of broken connections.
Any ideas ? I've been reading a lot into this probelm
on various postings now, and i'm completely stumped.
Thanks for your time.
Alkesh

Session creation issues with DS3.2

We are using BODS 3.2 for development. We are aware that a newer version of DS has been released quite a long time ago but due to some reasons we are still using DS 3.2.
We are facing some session creation issues. We are using Teradata and Oracle as source and extracting\updating data using some SQLs in script tasks. SQLs are targeting huge amount of data. We executed a job and checked on the servers, sessions were created on the databases. Job kept on executing for long time and was not getting completed, there was no error also. After waiting so long, I checked on Database server and found that session was lost for these SQLs on Database servers. We are able to create a successful connection using Data Stores.
Please suggest something, Why the sessions are not getting lost on the database servers?.
Thanks & Regards,
Gaurav Bansal

ginger_11 wrote:
Hi...I'm new to the forum.
2 of the same phones in my household having similar issues since OS upgrade.
-Text automatically going to MMS when sending pics and the pics won't send. 1 phone freezes, the other acts like its sent but not sent-this phone won't load emailed pics either.
-Keep getting notifications that passwords need updated for email accounts.
-Facebook app won't load on 1 phone-tried deleting, pulling battery and re-installing. Still getting "session re log-in required" but there is nowhere to load the log-in info under accounts. Getting the same message on the other phone but the app is still listed under accounts so am able to log in.
-Both phones are randomly re-starting. Multiple times over past 3 days.
Any known issues like these?
There must be some common factor why both phones are having the same problem.
With the 10.2.1.537, the only problem I had was a few contacts merged and surnames were repeated.
I haven't noticed any difference with the latest upgrade.
Maybe a security wipe and restore contacts and email then one app at a time.

Talent pool creation

Hi Experts,
Can anyone guide regarding Talent Pool Creation?
Is it possible in standard configuration or additional complexities are there?
Regards,
RK.

Hi,
you have to logon to Talent Management specialist via enterprise portal. There you can create Talent Pools. It is only possible with the web dynpro UI! It is not possible from SAP backend.
But you need enterprise search up and running to assign employees to the talent pool as talent management specialist.
As a Manager you can assignt employees to a Talent pool.
best regards
Martin Hastik

KMS Pool creation

Has anyone been successful on a pool creation with using KMS?... I have tried with ISO and existing VM. Main reason I ask is that when I tried using a MAK key after a while the pool vms became not activated which eventually became not geniune. Which prevents any use of them and I then have to recreate the pool using MAK keys. Any input on this subject would be appreciated.

Hi,
Accroding to the error message "Remote Desktop Virtualization Host failed to set zeroconfig information from the virtual machine", it originally occurres on the template VM and wouldn't allow the creation of the VDI pool. Maybe it is
due to the VM created from the new image is not in the correct status. You can check the status of the VM and make sure it is running.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Microsoft Project - Resource Pool Major Issues (continuation)

Hi All,
I have followed the the very helpful discussions in this forum under "Resource Pool Major Issues". I have read all the other related discussions as well.
I still have a question on the Resource Pool:- I am using a stand-alone version of Project Professional 2007
I create a Resource Pool; a Master Schedule and then insert several different Project Schedules into the Master.
I have gone through the motions of harmonizing the calenders and all the other good stuff recommended in the blog.
I then share the resources from the Pool.
When I open each activity to load the resources, I cannot see the shared resources except at the Project level (but not at the task level)
The only way I can pull the resources into the tasks is
if I break the links of each inserted Project. (incidentally the inserted tasks are automatically linked option is de-selected)
Even then, I get an irritating message pop-up saying that the calender does not exist.
Has anyone had this experience, is it the correct way to share the resources; and do you have any thoughts, suggestions on this matter?
Thanks
FK

Hard Core,
You indicate you have Project 2007 but you didn't tell us if you have SP3 installed. If not, do so.
Since you indicate that you have "read all related discussions" I will assume that you are aware of the tenuous nature of linked structures in Project and that they are prone to corruption.
Please clarify something. What exactly do you mean by "open each activity" and "I cannot see the shared resources except at the Project level"? Also, which links are you breaking?
We can't really tell you if what you are doing is the correct way, (probably not if you have to break links for it to work), until we understand exactly what you are doing.
John

Site Creation Issue.

We had a user report a site creation issue with their site. They had been able to create sites with no problem up to this point. But now, when attempting to crate a site they get an error "User can't be found". But if they create a blank site
I or a blank team workspace. The site creates without incident. Any idea? The permissions appear to be correct but they can't create anything but blank sites without receiving the error. Maybe check permissions to webparts and templates (Do you know where
I could do that)?

Hi,
Did you mean create site collections in the CA?
Did the users have admin permission or other permission? You can use the admin account to check whether it works.
To narrow down the issue, you can use other web application to check whether it works.
Maybe the web application had been corrupted.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Issues with Weblogic connection pool creation

Hi,
I need to create a Connection pool in weblogic to access a mdb file(MS Access) .
Iam not able to see any precoded drivers in weblogic for accessing MS Access.
Let me know if anyone has details on this.
Thanks.

I tried this one and this seems to be a trial version.
Are there any free apis available? In case there are any other way do let me know.
Thanks.

Custom infotype creation issue

Hi Experts,
I have a requirement to create a custom infotype based on certain conditions. But there is a problem while saving data in the infotype. The infotype is populated from another infotype automatically through dynamic actions.
But while saving the data for the first time it happens as per the requirements and data gets saved properly.
But when the data is saved for the second time for the same pernr , the previous data is over written even though the new record starts with a different begin data.Also i have created the infotype with time constraint '1'.
can you please let me know if i am missing anything while creating or is this a logic issue .? all the logic has been coded in the flow logic part of the screen.
also if i dont save the data in the infotype it does not pop up any message like 'data not saved' which usually happens with every infotype. Please clarify me on this as well...
Thanks,
Raj Thilak.

Hi,
Check the logic how it is updating the custom infotype . I think it is nothing to do with creation of custom info type
Regards
Krishna

Intercompany PO Creation issue ??

hii
While doing Po i getting below error
" Goods receipt date cannot be in the past "
How to rectify this ?? and why its occuring ??
Thanks

Jürgen L. wrote:
> compare the goods receipt date with the goods issue date in the delivery. I guess the delivery has a GI date bigger than the date that you use for GR.
sorry, I thought you get this error when doing goods receipt, but just realized you said at PO creation.
can you please give the message number,as I cannot find a message like written by you in my SAP.
(all messages are stored in table T100)
doubleclick the message or click the question mark next to the message

Customer sales return - excise inv creation issue

Dear expert,
        We are testing the "Customer sales Return" scenario for one of our client. Our process is,
1. Create sales return order (VA01) with ref or without reference
2. Create return delivery (VL01N)
3. Perform Post goods Receipt (VL02N)
4. Create Credit Note (VF01) - Here in this case we are differ. We are creating the "Credit Note" with reference to return delivery not with ref to sales return order
               Since we planned to create the credit note with reference to "Return delivery", we have defined the CIN related customizing as "Assign Billing Types to Delivery Types".
           Then we tried to create the excise Invoice using Transaction J1IIN. But we are getting the error message as
                              Billing document 3134000001 does not exist
                              Message no. 8I422
Kindly give your suggestion to overcome this issue.
Warm Regards,
Nag

Dear Experts,
         Thanks for your quick response.
Yes, already we maintained the billing relevance field in item category maintained as "A" & Copy contorl in VTFL also. Due to this we can able to create the "credit Note" in Transaction VF01. But during excise Invoice creation only we are facing the above mentioned issue.
Feedback for the response from SDL:-
                 Yes, we came to know that, for customer sales return process we need to raise a JV only not the excise invoice creation in J1IIN. But we are in the assumption that, this scenario is applicable of we are creating the "Credit Note" with reference to return sales order.
             But in our case, we are creating the "Credit Note" with reference to "Return delivery". Since delivery is involved in the process we are in the assumption that we can able to create the excise invoice using J1IIN after maintaining the configuration in the "Assign Billing Types to Delivery Types" area.
Please give your valuable feedback on this.
Warm Regards,
Nag

Company code creation issue

Hi All,
When I am creating company code I am getting an error as below.
"you may not change the currency since documents exist with this currency"
Above issue is coming while new co code creation or copying of existing co code also.
Please advice on the above issue.
Regards,
Riyaz

Hi,
I hope you are creating new company code by copying from the exiting company code. If you copy one company code to another company code then you will get few pop- up message like do you want to use same chart of account or do you want to use same currecny like that. So may be you have selected different currecny. Sap has come up with country template for each country. So you can use country template to create the new company code.
Thanks & Regards
R.K

Web service proxy creation issue

am facing an issue with the creation of web service proxy for an esb project that i have created based on oracle esb tutorial. In the web service proxy creation wizard, it is accepting the concrete URL for the wsdl in the first step however in the second step it is not showing any endpoint URL. Also the wizard does not allow to go beyond step 2 of the web service proxy creation. following is my wsdl to which the concrete wsdl url points to. What am i missing here. Please help
following is my wsdl
<?xml version= '1.0' encoding= 'UTF-8' ?>
<definitions
name="custinsoap_RS"
targetNamespace="http://oracle.com/esb/namespaces/custdata"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://oracle.com/esb/namespaces/custdata"
xmlns:inp1="http://xmlns.oracle.com/Esb/CustomerData"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://xmlns.oracle.com/Esb/CustomerData" schemaLocation="public_html/LegacyCustomer.xsd" />
</schema>
</types>
<message name="CustomerData_request">
<part name="CustomerData" element="inp1:CustomerData"/>
</message>
<portType name="Readcustsoapdata_ppt">
<operation name="Readcustsoapdata">
<input message="tns:CustomerData_request"/>
</operation>
</portType>
<binding name="readsoapbinding" type="tns:Readcustsoapdata_ppt">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="Readcustsoapdata">
<soap:operation soapAction="http://oracle.com/esb/namespaces/custdata/Readcustsoapdata"/>
<input>
<soap:body use="literal" parts="CustomerData"/>
</input>
<output>
<soap:body use="literal" parts=""/>
</output>
</operation>
</binding>
<service name="readcustdatasoapservice">
<port name="soapport" binding="tns:readsoapbinding">
<soap:address location="http://myhost.mycompany.com/esb/wsil/custdata/custinsoap_RS"/>
</port>
</service>
</definitions>

Hi,
Are you accessing teh WSDl from a deployed service ? If yes, when providing the Web Service URL, did you extend the URL with ?WSDL ?
Frank

Pool creation issues

Similar Messages

Maybe you are looking for