POP Forwarding Agent for Groupwise 7

Is there a POP Forwarding Agent for Groupwise 7

Dave Parkes wrote:
> http://www.imailds.com/Frames/Master/Products.htm
>
> is probably your best bet. The old PFA agent is still available from
> CoolSolutions, but hasn't been touched in a while.
>
> Also, probably best asked in the GW7 gateways forum by the way <g>
>
> Cheers Dave
>
Hi Dave,
Youre a lifesaver...
Thank you for your suggestion.
I checked out the link you recommended... www.imailds.com .
And it looks like its going to be a solution to my ISP Dynamic IP problem.
I'm a big Netware/GroupWise enthusiast, trying to offer people relevant
networking alternatives using Novell.
Thanks for the Help.
Ill let you know how I make out.
[email protected]
>

Similar Messages

Forwarding agent for Delivery?

Hello SAPients!
Where can I find the forwarding agent (carrier) for a Delivery? It's supposed to be in LIKP-OIC_LIFNR but it's not there. Where else should I be looking for it?
I can see the field populated in VL02N in the header of the delivery, in the 'shipment' tab, there is a button 'Ext. Dtls' (External Details) and I see the field with the value but when I go to technical details (F1...) I see a structure pointing to OIC_LIFNR but I can't find the table.
Thanks!

it should be VTTK-TDLNR .
just get the forward agent based on delivery
do compare with LIKP-vbeln = vttp-vbeln,then get tknum from VTTP,do compare with VTTK-tknum,and get the TDLNR
Thanks
Seshu

Error while changing forwarding agent in shipment

Hi all,
Im trying to make change in forwarding agent for a shipment in VT02n . When i try to save it , one pop up came with message "Express document - Update was terminated by author'' .
The error info is " ZT 907: The communications link to the IT System has been interrupted"
Any idea why this error is coming ?
Thanks in advance .
Regards,
Anil

ru trying to modify the SAP internal table in the user exit. Modify index is wrong or update indicator can be an issue. Check the custom message ZT-907

How to create Forwarding Agent?

Hi Gurus,
Can anybody throw some light regarding Forwarding Agent,Personnel and contact persons.....
1.How to create them(In detail)?
2.How to mention them in CMR of sold to party?
3.Who are they?
Thanks in advance.
Points will be awarded for sure.
Venkat

Contact persons are natural persons whom you must contact at the customers for business processing (for example, purchasers) It is not necessary for you to be a customer employee, you could, for example, be an independent advisor.
You can create contact persons directly in the customer master record. You are then assigned to this customer. The contact persons can however be assigned to other customers.
Forwarding agent
A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
Possible partner functions on the credit side in the sales process are for example,interpreters, auditors.
Personnel
Employee responsible
Sales personnel
You can enter an employee from your firm as the person responsible:
In the customer master: if the employee is normally responsible for processing transactions with this customer
In the sales document: if the employee is responsible for processing the business transaction.
sales and distribution under Basic functions--> Partner Determination -
>Define and assign partner determination procedures.

Fixing forwarding Agent based on Sales Order volume

Hi Experts,
Based on the Sales Order total volume, how can I fix a forwarding agent for that. Eg. If the Sales Order volume (Pls note this is not order Quantity) is more than 500 lbs that has to be despatch only through forwarding agent DHL.
Waiting for the help to solving this issue.
Christine.

You will need to add code to do you determination via a user exit or badi.
Take a look at mv45afzz or some of the include exits around it in sapmv45a.
You will need to supplement delivered logic with your own in order to do what you want to do.

Boundarys forwarding agent

Hi All,
How to boundary forwarding agent in shipment process so only forwarding agent for transportation appear in list.
Thanks
Saiful arif

Hello,
If you have configured forwarding agent and route determination then go to tcode : 0VTC . There is a field service agent ( tcode : 0VTC ) .Maintain the forwarding agent in route .
Thanks
RK

Reconcillation account for Forwarding Agent V-11

Gurus
I have copied company code from standard 1000, without the G/L accounts.
I have created account group with OBD4, and G/L accounts withe FS00, which i used in customer master as reconcillation account ( so as to see effect of accounting document)
While creating forwarding agent V-11 ( For Route determination ), When I use one of the G/L accounts I created, I get an error
" Account 4200000000 is invalid reconcillation account in company code XXXX "
I do not know in detail about settings required for Reconcillation account.
Would appreciate if explained step by step.
Regards
Trupti

You have not indicated whether you have assigned the Account Group 0005 to your Partner Functions.
Also, in VT01N, what message system was popping up. Please update.
thanks
G. Lakshmipathi

Foreign Trade for Freight Forwarding Agents within USA

My client uses foreign trade to export materials from US to outside countries.
I've done all necessary configurations by going through the SAP documentation on Foreign Trade.   It works perfect with key combination of Sales Organization + Bill-to party (where Bill-to party's country is outside USA.
But it does NOT work when we create a condition table with key combination of Sales Organization + Ship-to Party (where ship-to party country is USA).
Material Master (Export Foreign Trade) has already been setup with appropriate commodity codes.
We send customs invoice (boarder broker document) to Freight Forwarding agent (Ship-to Party) whose address is within USA.   And they then take responsibility to export the material to outside USA.
Problem-1: During Delivery creation, the system automatically copies the FT information from MM when the Ship-to Party's country code is outside USA. But NOT for Ship-to Party's country code within USA.
Problem-2: Customs condition table on key combination Sales Organization + Ship-to does NOT work during creation of billing document (VF01 or VF04).   We need this custom so the custom invoice to print automatically using the custom output type.
Need your help.   Please respond ASAP. Points will be rewarded.
Thanks,
Nevill.

My client uses foreign trade to export materials from US to outside countries.
I've done all necessary configurations by going through the SAP documentation on Foreign Trade.   It works perfect with key combination of Sales Organization + Bill-to party (where Bill-to party's country is outside USA.
But it does NOT work when we create a condition table with key combination of Sales Organization + Ship-to Party (where ship-to party country is USA).
Material Master (Export Foreign Trade) has already been setup with appropriate commodity codes.
We send customs invoice (boarder broker document) to Freight Forwarding agent (Ship-to Party) whose address is within USA.   And they then take responsibility to export the material to outside USA.
Problem-1: During Delivery creation, the system automatically copies the FT information from MM when the Ship-to Party's country code is outside USA. But NOT for Ship-to Party's country code within USA.
Problem-2: Customs condition table on key combination Sales Organization + Ship-to does NOT work during creation of billing document (VF01 or VF04).   We need this custom so the custom invoice to print automatically using the custom output type.
Need your help.   Please respond ASAP. Points will be rewarded.
Thanks,
Nevill.

Shipment Cost for different Forwarding agents in one Shipment Document

Hi.
I have an requirement, can we create one shipment type, which is based on multiple Forwading Agents,
i.e suppose if we have a Route with priliminary & subsequent legs having forwrding agents different at each stage.cost has to be calculated according to the forwarding agents with in the document according to the ROUTE .plz suggest..
Regards.
Sujith.

Hi Sujith,
This situation may arriase anytime.
it is possible to create one shipment cost document for more than 2 forwarding agents.
Standard SAP gives all the option in such scenario.
No Z developments required for achieving seperate costing for individual forwarder.
Regards,
Dnyandeo H. Ainarkar

Forwarding Agent on Sales Order Coming as Customer ( I want it for Vendor )

Hello Folks,
When i select a forwarding agent on the sales order header , i am getting an error "Customer not created " and opens up an F4 help for customers . The thing is my forwarding agents have been created as vendors and I want my vendors to show up in F4 help.
FYI , in partner determination ,for the partner function FA(forwarding agent ) i have set up the partner type as LI (Vendor ). Even then it doesnt work.
Please advice what else I should do.
Thanks,

Hi,
At what level this is happening in sales order either @ Header or Item level.
- Re-check in Tx:VOPA - assigned partner determination procedure.
If you are using ECC 6.0
then use the partner fuction : CR - Forwarding agent - partner type (LI - as mentioned)
where as in Sales order, Partner fucntion you have to use it "SP-Forwarding agent" ( note: SP is not sold to party in SO , for Sold to Party its AG)
Check both @ Header & item level.
Regards,
Reazuddin MD

UserExit for Forwarding Agent

Hi
which user exit is for forwarding agent in delivery. I need to remove that user exit.
Regards
Vengat.G
Moderator message : Search for available information, read forum rules before posting. Thread locked.
Edited by: Vinod Kumar on Aug 18, 2011 3:38 PM

it should be VTTK-TDLNR .
just get the forward agent based on delivery
do compare with LIKP-vbeln = vttp-vbeln,then get tknum from VTTP,do compare with VTTK-tknum,and get the TDLNR
Thanks
Seshu

Forwarding agent in ME21N

How to include the forwarding agent in the PO header item .?The Pop up is not showing the forwarding agent.But it is available in the vendor master .
Thanks

hi,
you need to create the partner function "Forwarding Agent" and attach it to the vendor schema and this schema should be attached to the vendor account group. by doing this, whenever you create PO for the main vendor the partner function Forwarding agent will be picked up in the PO.
the configuration can be done in partner determination in SPRO-- material management-- purchasing-- partner determination.
hope this helps
regards
vikrama

Problem with the Forwarding agent in MIRO

Dear Guys ,
i have created 2 POs with 2 vendors V1 and V2 . Now in both the POs, the Forwarding agent is the same FA. We will maintain FA in both the POs with relevent Freight condition types and amounts too .The FA charges 10 rupees for V1 and 3 rupees for V2 . Now we have to do MIRO for both the POs in a single shot . Please help me regarding the same

Hi,
Your Forwarding agent FA should be a vendor (lets say V3).You created two POs with vendors V1 and V2 and during PO creation, you should assign Freight condition types to V3 for both POu2019s.
Once you finish GR, then you can do MIRO for two POu2019s to vendor-V3
During MIRO,
Select Purchase Order/Scheduling agreement, enter PO number
Select Planned Delivery Cost
After entering PO number, next to that, you have icon, Click on u201CMore Allocation Criteriau201D and you can enter other PO number in next pop-up screen and adopt it. Now you can see both PO number with two values( 10 & 3) for Vendor-V3, simulate and post document.
Regards,
Biju K

No log for am policy agent for iis6

Hello!
Im trying to get Policy Agent for IIS to run on my Win Srv 2003 with IIS6 and Sharepoint Services.
I am running the OpenSSO version of Access Manager.
I have installed the agent and done the initial cofiguration.
When i try to browse the resource i get a login prompt (IIS Basic Auth)and cannot login followed by "Not Authorized 401.3"
I should get redirected to the AM Login page, shouldn't I?
I tried to look for answers in the log file but the /debug/<id> directory i empty.
Anyone know what to do?
The amAgent.properties file:
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://login.lta.mil.se:8080/opensso/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://login.lta.mil.se:8080/opensso/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.sharepoint.lta.mil.se.80
# Set the logging level for the specified logging categories.
# The format of the values is
# <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
# 0 Disable logging from specified module*
# 1 Log error messages
# 2 Log warning and error messages
# 3 Log info, warning, and error messages
# 4 Log debug, info, warning, and error messages
# 5 Like level 4, but with even more debugging messages
# 128 log url access to log file on AM server.
# 256 log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level = 5
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = PN4rEZ1uhx1404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = C:/Sun/Access_Manager/Agents/2.2/iis6/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://sharepoint.lta.mil.se:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organiz ational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_BOTH
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://sharepoint.lta.mil.se:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = sharepoint.lta.mil.se
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = true
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port = true
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAuthFilter

If the agent doesnot start properly you would always get redirected to com.sun.am.policy.agents.config.accessdenied.url , if thats not specified you will get a 403.
For the agent itself check that the naming.url is correct. the agent username and passwords are correct, and see that the user has priviledges to write to the agent log files. Apart from these post the windows event logs.

Adding Forwarding Agent to Partner details in a Sales Order.

Hi Experts,
Below is the detailed scenario :
We have inbound orders been created by Idocs Orders04 using the Idoc_Input_orders function module.
the requirement is that if the partner forwarding agent is not been populated in Idoc then we need to add the same in the SO Partner details from Z table based on the sold to party in the idoc.
Can anyone please help how I can proceed with the requirement. I have created a Z table and maintain the entries. I am not understanding where i should be doing the Coding for the same.
Thanks and Regards,
Nimisha.

Hello,
inside the VA01-transaction there are the userexits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 influencing the partner determination. Think most probably you could use the EXIT_SAPLV09A_004
(Enhancement is V09A0004).
You could switch on that one and look, which partners are in the order at that point of time.
Regards
Wolfgang

POP Forwarding Agent for Groupwise 7

Similar Messages

Maybe you are looking for