Pop up box is not handel in BDC program
hi to all experts,
in tcode ' IP10 ' one pop up box is came in simple processing and recording also. but when i used the system source code in program , this pop up box is not encounter on this conditions. how can i solve this issue.
Help is appriciated.
Regards:
Mahesh
hi,
if the warning message coming in a pop-up window then it can be supressed in the following way.
1. comment the lines of the code of bdc recording of that pop-up screen along with the perform of bdc ok code '=ENTE".
2. use the structure ctu_params and fill the correspondings fiels, particularly the field nobinpt = 'X' and then use this structure in the call transcation statement as
call transcation 'ME11'
using bdcdata
options from opt ( structure of ctu_params )
3. At the time of recording use the option of check box " no batch input session ".
regards,
Alok
Similar Messages
-
"save as" pop up box does not allow me to save the document.
Hello ,
"save as" pop up box does not allow me to save the document. Shows a blank screen. Any idea what would cause this? I just purchased acrobat pro dc.
Thanks!Found this solution:
The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files": -
Select query is not working in BDC Program
Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond -
Hi,
We have created some pop-up boxes (Text object with html), but we would like them to be displayed based on certain conditions. For instance, if a function is executed successfully, the pop-up box should not appear. Or if a key figure has a specific amount, the pop-up box should appear.
Is there a way to build a logic to achieve that?
The white paper 'How To validate key figure values in Manual planning' can issue error messages but does not give the user the ability to execute or not a subsequent function.
Thanks for any help.
David ThoumieuxHi David,
What are your javascript skills like?
You could use javascript to read the contents of the message box, check for successful planning functions, then throw up a pop-up choice to execute a BPS planning function (search the forum - there are a few threads for executing functions using javscript) depending on a condition determined by a range of key fig values that you specify....
Marc Bernard posted the following script as a way to sort through the message box and only return messages of a certain message number...........use this as a start to scroll through a return/find certain message types, then write a little script which executes the relevant BPS function.....
Good luck,
Rael
<SCRIPT LANGUAGE="JavaScript">
var msg_table = document.all("msg_table");
if (msg_table != undefined ) {
// Loop over all rows and hide some
for (var j = 0; j < msg_table.rows.length; j++) {
var msg_text = msg_table.rows[j].innerHTML;
// Regular expression pattern to look for message
var msg_search = /msgid=UPC.*msgno=301/i;
if (msg_text.search(msg_search) > 0) {
msg_table.rows[j].style.display = "none";
</SCRIPT> -
Pop-up box problems - mobile version
In the mobile version of my site the pop-up box will not close. I can see there is an option to have a close button in the 'parts' section but it's greyed out. I don't have this problem in my desktop version - pop up boxes close with a click anywhere else on the page.
Help!Thank you for posting.
Are you referring to the lightbox pop up box? Please provide us a screenshot of what you are referring to.
Thanks,
Aishvaray Raj Rastogi -
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
-
I keep getting a pop up box on my iPhone asking me to enter my password - and the apple id does not match mine. I click 'Cancel' but it keeps reappearing and interfering with other apps. What did I do to get this and what do I do to get rid of it? Is it someone or something phishing for my password? The only app I recently downloaded was PF Chang's and I got that directly from the App Store.
Try signing out and then back in again by going into Settings>Store>Apple ID:>Sign Out>
-
Pop up box with Ok and Cancel choices, not working. Please Help.
Hello! I am trying to create a pop up box that allows users to choose Ok and Cancel (i'm just testing with Ok and Cancel for now). For some reason when I run it a CMD line pops up and closes very quickly, but i do not get errors. Here is my code:
private void button1_Click(object sender, EventArgs e)
PopupForm popup = new PopupForm();
DialogResult dialogresult = popup.ShowDialog();
if (dialogresult == DialogResult.OK)
Console.WriteLine("You clicked OK");
else if (dialogresult == DialogResult.Cancel)
Console.WriteLine("You clicked either Cancel or X button in the top right corner");
popup.Dispose();
Please help!
Thanks
- Rocketman123Hi Rocketman123,
Per my understanding, you are developing a winform application, but in your code, I see "Console.WriteLine".
So please use MessageBox.Show() instead.
http://msdn.microsoft.com/query/dev12.query?appId=Dev12IDEF1&l=EN-US&k=k(System.Windows.Forms.MessageBox.Show);k(TargetFrameworkMoniker-.NETFramework,Version%3Dv4.5);k(DevLang-csharp)&rd=true
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I want to totally disable Mozilla's pop-up blocker. I went to the tools/options page and found that the pop up blocker box is not checked but it is still blocking pop-ups. I see that others are having the same problem. How do we fix it, or, is this a programming issue and if so, is Firefox fixing it? It is quite annoying.
Could you click the Exceptions button to the right of "Block pop-up windows" and make sure none of those sites is specifically blocked?
If you have unchecked the box and there is no site-specific setting, that usually does it...
Is it possible that an add-on is doing the blocking? A standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
Check the Options dialog > Content to make sure the pop-up blocker is turned off.
If popups now work correctly, this points to one of your extensions as the most likely culprit. If you restart in normal mode, you can try disabling (or adjusting the options of) any that seem possibly popup-related (e.g., security related) here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions category
Any change? -
Flashplayer pop up box "Requesting permission to store info on my computer" does not respond and will not go away. How do I get rid of it. It is most annoying as it stays right in the middle of the screen.
Move cursor onto video. Right click. Click Settings, Click the "never ask again" box. Then click Close. That will work.
For some reason, that always worked for me, but in the last two days, it does not work, and it seems to freeze on the
video. See, if it works for you. -
When I open a attachment from an email a box always pops up that says what program do i want to open this document with. How do i get rid of this pop up box?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins
Do a malware check with some malware scanning programs on the Windows computer.<br />
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
these are the boxes that open up:
I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.anyone able to help me with the above?
-
TypeError: this.oRoot.enable is not a function
This is popping up when I befor I open my browser,in a pop up box under the heading JAVA SCRIPT EXE. What is it, how do I get rid of it?I did it in my computer, but I can not uninstall the Site Advisor alone. I need to uninstsll the the total McAfee plus. What should I do?
But another user in my computer they do not have this problem. If I try to use IE or Chrome etc , I can not find this problem. I use firefox since 2006 and do not want to change another one. What should I do?
By the way I have this problem after I update Firefox6 3 weeks ago and always allow 1 plugin work. The other user in this computer they just allow firefox plugin working 1 times.
It will pop out if I disable the siteadivsor.
many thanks -
all of a sudden i'm getting this pop up box saying 'could not complete your request. File is locked. ' Did i mistakenly lock the file by pressing a button without realizing it?
>> "NSDArray...[numbers/letters]".
That's an error from the OS leaking into Photoshop. It is due to a bug in MacOS 10.10 that occurs in the open and save dialogs (which are controlled by the OS). Apple is aware of this and working on solutions.
Some people have had luck changing the view in the open/save dialogs to grid view or list view. -
Continually get pop up box "The song "song title" could not be used because the original file could not be found. Would you like to locate it?"
Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh
Maybe you are looking for
-
Ethernet connection from iMac to pc transfer question
I'm going to be getting an iMac shortly. I currently have a Windows PC. I'm sure I read somewhere that its possible to connect a Mac and a Windows PC together with an Ethernet cable. What I'm wanting to do is, rather than transfer my music, photos,
-
Have renewed my ExportPDF Subscription, have the confirmation email, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)
-
Can I sync "on my mac" mailboxes to my iphone without using mobile me? Thank you
-
Table that stores Job Log details
Dear Experts.....!! I have an issue, for which I need to access the Start Date, Start Time and the End Time for a Particular Back-ground Job. I'm not able to figure-out the table that contains these details. The Input that I can p
-
Computer is Windows XP. Printer is wired network connection. Printer is new OfficeJet Pro 8600 N911g and has the latest drivers and firmware.