Pop Up: The software you are installing for this hardware has not passed Windows Logo testing - AntiVirus

When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
The software you are installing for this hardware has not passed Windows Logo
testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?

Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
Jason | http://blog.configmgrftw.com
Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
Description: 0x8004FF03.                                   
InstallUpgradeOrUpdateInProgress=4.1.509.0

Similar Messages

  • "Software has not passed Windows logo testing"

    My sister just bought a new 30G Ipod. During the installation a window popped up saying
    "The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP"
    However my dad also has a 30GB Ipod that he's had for a few months now and its working just fine. So I guess my question is
    (1)Is there a difference in the systems or something that the new one isn't compatible?
    (2)Is there anyway to perhaps have it tested somehow by the computer or some other solution to get past this?
    (I myself don't know much about Ipods or Apple products so I apologize if this is a doofy question!)
    Compaq 9500   Windows XP  

    try downloading and saving a fresh copy of the installer to your hard drive. (run the install from there rather than online.) switch off antispyware and antivirus applications prior to the install.
    iTunes 7.0.2.16 Installer
    if you get the message again with the fresh installer, perhaps try checking through the following Microsoft Knowledge Base document:
    (MS) You cannot install some updates or programs

  • Software CD has not passed Windows Logo testing???

    This is what it showed when I was installing the softwares from the CD which came with my N73 music edition... "...has not passed Windows Logo testing"
    I still clicked on "continue anyway" tab and went ahead... But now the data cable doesn't connect to the softwares. For transferring music, I clicked on media player option and it said messaging is using my memory card, so first change settings in messaging. On clicking Nokia PC suite option, it keeps on detecting the device but nothing happens...
    My PC has Windows XP only, the CD's cover shows its compatibility with XP... what can be the problem then??

    you can generally ignore the error message if you are using trusted software ie from nokia etc as it just means your operating system is unable to verify its authentisity (sp) but for transfering data your better to select data transfer when connecting the usb and then dragging and dropping the files into the handset.
    go to my computer then open the icon called removable disk, there will be a folder called music or something similar -this is your phones mass memory, drop the songs into here.
    hope this helps

  • Itunes 7.6 update not passing windows logo testing for compatibility

    I have tried to update itunes 3 times. It downloads fine but when it gets to the installation part, I get a warning from windows saying that this software has not passed the windows logo test for compatibility and that if I proceed with the installaton, The system may get impaired. So I stop installation, but eventually I have to update itunes. My ipod gets updated but itunes is not. Lately I've been having problems with my ipod acting buggy. Is this familiar to anyone? Why is this happening and what do I need to do? Thanks!

    With that particular message, it might be worth checking through the techniques from the following Microsoft document:
    (MS) You cannot install some updates or programs

  • Need software that has passed windows logo testing

    can not install the wireless Officejet 6500.  The 6500 is installed on the network.  Message while do installation is "windows logo testing failed to verify compatibilty with windows XP"  installation will not go beyond this point.  The odd part of this is that I had it installed at one time and then the installtion failed.
    I have tried your XP solutions and here is the message I received  "an error ocurred during installation.  The driver can not be installed because it is either not digitally signed or not signed in an approtriate manner"
    Where do I go from here?

    Hi callison11,
    On the Software Installation screen with the 'Windows logo testing ' error, click Continue Anyway .
    NOTE:You might receive more than one prompt about the software not passing Windows logo testing. Click Continue Anyway each time you receive the prompt.
    Windows logo testing is part of Microsoft's WHQL (Windows Hardware Quality Lab) program, which helps customers identify products that are compatible with the Windows operating system. WHQL certification is not related to product functionality. You can still install and use the HP printer and software without the WHQL certification.
    2.  Follow the on-screen instructions until you get to the Found New Hardware Wizard screen. This screen might include a list of products and prompt you to Please select the best match for your hardware from the list below . Leave the selection at the default, and then click Next .
    3.  Continue following the on-screen instructions to complete the HP software installation.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Attempting to update my itunes and a box stating this pops up "the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.64.msi

    Atthempting to update my itunes and a box stating this pops up "the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.64.msi

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card?

    "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card? There is a hardware fault but this is confined to the internal sim card receivers and purely the parts related to the sim card there are no other hardware faults! I've tried dfu mode and a restore and cant find anything related to this anywhere on the internet, thanks for any help in advance, Bobby

    iPhones require a SIM card, that card does not need to be active.

  • I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supp

    I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When I try to log in to my BC account I get a message that says this"Server Error in '/' Application.  The resource cannot be found.  Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its nam

    When I try to log in to my BC account I get a message that says this"Server Error in '/' Application.  The resource cannot be found.  Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.   Requested URL: /Admin/Index2.aspx"
    Any ideas???

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • Fix for "The version of the server you are trying to connect to is not supported."

    Like many of you, I experienced the following problem with Lion:
    "The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem."
    I googled and found a workaround for that. It worked for me, maybe worth a try:
    http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
    Koos

    Same problem here, and the above fixes do not work. I'm running 10.7.5, and the defaults write commands do not appear to work: the plist reverts to its default state after each connection attempt.
    I can confirm that the correct values are entered in the plist immediately after performing the defauts write commands (while logged in as root) described in those links, by opening the plist file in xcode. But regardless of rebooting or not, the file immediately reverts to its default values as soon as an afp connection is made. Extremely frustrating. The "defaults write" simply doesn't stick.
    I desperately need to pull some data off of a Mac IIci that is running Shareway IP under System 7.5.5. This always worked seamlessly in 10.4 though 10.6: I really need a working solution for 10.7. Thanks for any help...

  • Windows 7 help The topic you are looking for is not available in this version of Windows

    When I click on help, I get this message:  The topic you are looking for is not available in this version of Windows.
    I forget what my topic was, however, that is the response for any I try to get help for.

    Hi Akikuno
    It sounds like you are having issues with your help not coming up when you need to use it. I am providing you a link to a Microsoft Forum Thread where they are addressing the exact error message you are receiving.
    http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/the-topic-you-are-looking-for-is-not-avail...
    I would like to thank you for posting on the HP Forums and hope this resolves your issue so you can go back to enjoying your HP product. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Can not see training videos - message "We can't find the page you are looking for, please return to the Apple Support homepage?

    Can not open Training Videos shown on Apple Site - message comes us " we can not find the page you are looking for - please return to the main Apple Site"? Help

    You've used the wrong name for the folder that holds the html page.
    http://web.mac.com/artworksforyouth/iWeb/Site/Home.html
    Is what it is trying to find (and it doesn't exist).
    www.artworksforyouth.org redirects to www.artworksforyouth.com which then redirects to your iWeb page.
    Rather than the word "Site" in your URL you need to use ArtWorks%20for%20Youth

  • HTTP 404 - The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

    I have created a web app in our SP 2010 test env. From our dev environment I brought in a content db and attached it to this web app using Mount Powershell command.The command worked without errors.The content db had one site collection in it. When I navigate
    to that site I get the error below.I followed the same approach in dev and didn't have any issues.The content DB was migrated from MOSS 2007 site collection.
    Please help.
    HTTP Error 404.0 - Not Found
    The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
    It says the most likely causes are:
    The directory or file specified does not exist on the Web server.
    The URL contains a typographical error.
    A custom filter or module, such as URLScan, restricts access to the file.
    This error means that the file or directory does not exist on the server. Create the file or directory and try the request again.
    Sreeni

    try this trick
    open page in web browser and go to view source and check the file that missing

Maybe you are looking for