Pop up windows in SharePoint 2013

hello expert...
i have a report that has drilled through action (open subreport on click) in a new window. i have deployed the same report on the SharePoint 2013 however when i performed drill through action and expected the subreport to open in new window
but nothing happens.
i want to ask how can i perform pop up window in sharepoint 2013?

For some reason I thought I ran into this problem but it's been so long ago. One thing you might end up having to do is link directly to the sub report using paramaters passed via URL. So something like
https://sharepoint.domain.org/reports/report1.rpt?parameter1=x;parameter2=y so it loads the report using those parameters.
Basically try to do a click link in the report to google using the pop up code and see if you can at least get like google to come up separate, then you can just build a URL link to a report with the paramets to get into the report with the data needed.

Similar Messages

SharePoint 2013 Workflow Calendar Entry Create Time AM PM Conflict

Windows 2012, SharePoint 2013 Enterprise.
I have a change control form that basically creates a calendar entry once it's been approved. Works well, but discovered a bug with the calendar create portion when there are events that have the same time in AM\PM.
Use case:
1. Create a change control item in the list with a planned start time of 2PM, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM, all good.
2. Create another change control item in the list with a planned start time of 2AM this time, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM and not 2AM. ???
Yes the original event entry created in the list shows planned start time of 2AM, but its being created in the calendar entry as 2PM. This only happens when the time is exact. For example if I had created the second entry at 3PM, it will create the calendar
entry at 3PM. It only happens if there is an existing entry for the same time, then all subsequent entries for the same time will have the same AM\PM depending on the first entry.
I can manually create an entry in the calendar and specify 2PM and it will take, so its something with the workflow that is causing it. The workflow is very simple all its doing is checking the item to see if the field says approved for the change request
form if so, create calendar event and carry over the fields, planned start time, planned end time, title description, that's it.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Hi James,
In my test per your description, I cannot reproduce the issue, however, I attached the screenshot of my test for your reference, let me know if there is misunderstanding.
Please capture the screenshot of your workflow process design so I can try to reproduce or find out if there is action that may cause the issue.
In addition, could you please try to locate workflow error message? If there is obvious error information, please refer to the Activate Workflow Manager Logs part in the article below:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Windows Updates for SharePoint 2013 Environment

Hi
I created a visual machine for SharePoint 2013 development by following steps mentioned below.
--Install Winows Server 2008 R2
--SQL Server 2008 R2
--SP2 for SQL Server 2008 R2
--SP1 for Winows Server 2008 R2
--Sharepoint 2013 Pre-Requisites
--Sharepoint 2013 Setup
--Sharepoint 2013 Designer
--Installed March and August 2013 Cumulative Updates for SharePoint 2013
--Installed SP1 for SharePoint 2013
I want to ask do i need to install Windows Updates after installing different updates as i mentioned above because everty now and then windows updates message keep pops up and i did'nt install windows updates yet.
Why is it necessary or what impact window updates would have on my environment if i need to do it??

Windows Updates cover security updates as well as stability improvements, and so on. You're simply patching SharePoint and SQL in the above case.
It should be noted that any SharePoint patches that come down through Windows Update need to be manually handled as you'll need to run the Config Wizard (e.g. MS14-022 and MS14-050 which are SharePoint updates).
When you're installing SharePoint 2013, you only need to install SP1 if that is your target. There is no requirement to install March 2013 or August 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Creating a "Pop Up" Window/Box in Sharepoint 2010

Hi,
I have a CEWP with several image buttons in it. When a user clicks on the images, a "pop up" window should appear which will have several different links for the user to choose from. So when the user selects the the link he/she wants to go to,
the user will then be directed towards that page/list/form.
How can i create a "pop up" window/box for the 1st requirement?
Any assistance would be appreciated.
Thanks, Aarti

Hi ,
Pls check if it can helps you
http://social.technet.microsoft.com/Forums/office/en-US/a2fec044-669f-45a2-b979-7ec324831a8b/how-to-create-a-popup-message-box-in-sharepoint-2013-?forum=sharepointdevelopment
http://social.technet.microsoft.com/Forums/office/en-US/9b5a0fa5-0c09-4753-b276-8e8e42c21542/create-pop-up-window-from-a-listview-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

SharePoint 2013 Log in Pop up is coming randomly.

The log-in pop up window is coming some time in the SharePoint 2013 Publishing site template although it has been configured as window authentication with NTLM. The user is able to see the site after cancel it. But main problem is why it is coming for domain
user.
The site has been added to local intranet zone in the Browser.
Kindly refer to the below screen shot.
Regards
Anil thakur

Is the URL the same as the .local address in the authentication prompt? If it is not, you most likely have something on the page that is not using relative paths. You could work around this by adding the address in the authentication prompt
as an AAM to the site.
MCITP-EA | "Never test how deep the water is with both feet"

Credential Pop up while opening word document in SharePoint 2013

Hi
When I open office documents from SharePoint library, it is asking for credentials. Even if I put my credentials, pop up window will not go away. I have IE 11 and SharePoint 2013.
I have put this site in trusted site zone. User Authentication - Automatic logon with current user name and password.
I have clicked on Remember my credentials. I can see my saved credentials in credential manager.
The thing is, I was able to open word document without asking for password before. But recently, I have changed IE settings to be default level for some other reason, and since then it is asking me for credentials.
I looked online so many articles, but nothing has helped me yet.
Any help will be appreciated.
Thanks

Hi Cameron
Thanks for your response. Yesterday night, when I tried to open documents from sharepoint site from my home, it didn't ask me for credentials. I was using same laptop which I used in the office.
Again, today in the office, It started asking for credentials when I open office document.
The only difference is internet connection is different between my home and the office.
Not sure what could be the issue.
Thanks

SharePoint 2013 Pop-Up Dialog Boxes are Blank

Hi all,
I'm having a weird issue where any "dialog" pop-up window appears completely blank, but has the word "Dialog" in the top left hand corner of the box. Or, I'll just get the "Working on it" message for a couple minutes, and the
box goes to a blank rectangle shape (no content whatsoever inside of it).
This applies to all lists or libraries that have the "Launch forms in a dialog" option to YES or any that use that behavior by default (i.e. calendar or doc library upload dialog).
Any idea what could be causing this?
Thanks!

Hi,
Is the master page is customized. Please inspect using developer tool any css class preventing to appear. just a quick thought.
Thanks!
Hello!
In this case, the sites are using the default master page. However, one thing to note is these are sites that were migrated from a different SharePoint 2013 server farm. I'm not sure if that matters or not.

Sharepoint 2013 installation in windows 2012 R2 server

Hi,
I am unable to install Sharepoint 2013 server on Windows 2012 R2 Server.
I am getting below error
The tool was unable to install Application Server Role, Web Server (IIS) Role.
I checked my IIS it is working fine.
Please help me out.
Regards,
Siva.

Make sure you have the SharePoint 2013 with Service Pack 1 ISO. Pre-SP1 will not install to SP 2013, and you cannot slipstream it yourself.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2013 SP1 on Windows 2012 R2

Hello all,
Excited as I was to finally get the slip-streamed version of SP 2013 with SP1 so I could install it on Windows 2012 R2 I'm having trouble installing the pre-requisites.
I've found this article here -
http://support.microsoft.com/kb/2765260/en-gb - but the resolution won't work. The update (KB2771431) won't install on 2012 R2 and the manual fix fails even though I am connected to the internet.
Has anyone successfully installed SP 2013 SP1 on 2012 R2 ?
Thanks

Hi etala,
Please intall Windows Server AppFabric manually.
Here are some links, please take a look at:
http://blogs.technet.com/b/praveenh/archive/2013/02/22/sharepoint-2013-prerequisites-fails-with-msi-installer-error-code-1603-while-installing-appfabric-1-1.aspx
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
http://www.spjeff.com/2012/07/19/fixed-sharepoint-2013-setup-error-appfabric-is-not-correctly-configured/
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Install SharePoint 2013 on Windows 2012 R2

What are the right steps to slipsteam SP 2013 with SP1, from what I understand this will fix the issues with Windows 2012 R2

You currently cannot install SharePoint 2013 on 2012 R2. You will need to wait for an updated ISO release from Microsoft for SharePoint 2013 with Service Pack 1, which will have an updated pre-req installer binary.
The SP1 currently out does not update that binary.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Install sharepoint 2013 demo on windows 2012 r2 essentials

Am configuring my laptop for demo so installing windows 2012 r2 essentials (which requires to be the DC). I know SharePoint 2013 server is not recommended to be installed on the DC. I have seen the Workflow 2013 is not supported on the DC but
still can work with the 2010 workflow. any other SharePoint 2013 features are not available on the DC ? From the SQL Server perspective this will only be a security issue the way I see, but am using this laptop for demo/test only.

HI,As you said,SharePoint 2013 does not support installation on to a domain controller. A single label domain (SLD) names or single label forests is also not supported. Because the use of SLD names is not a recommended practice, . Therefore, there may be
incompatibility issues when SharePoint 2013 are implemented in a single label domain environment.Apart from this no issues.you can find the detailed installation of sharepoint 2013 in below.
http://expertsharepoint.blogspot.de/2013/11/detailed-sharepoint2013-installation-i.html.
you can find the details on latest patches in the same site.
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem Kumar

To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2013 RTM and WIndows Server Core 2012

Hi,
I've got a simple question I couldn't find the answer on the net.
Is SharePoint 2013 officially supported (supported, not just working almost fine) by Microsoft if installed on a Windows 2012 Server Core? Does it depend on the roles of the farm?
If possible I would like to have official sources from Microsoft.
Thanks for helping :)
Cya

First, I guess I should start with a disclaimer. I do work for Microsoft, but I do not speak for the product group and have no authority over what is/is not/will/will be supported with regards to SharePoint 2013.
My assumption however is that we'll treat it the same way we did for SharePoint 2010. It should work just fine and should be supported. The software requirements that Jason points out indicate that SharePoint requires Windows Server
2012 Standard or DataCenter. Choosing to install in core or with a UI doesn't change the fact that you've installed either Standard or DataCenter.
Also, from a support perspective, you can use remote tools in order to perform common tasks, such as checking the event log, restarting services, etc.
Roger Cormier
Microsoft
Premier Field Engineer, SharePoint
Blog: http://blogs.msdn.com/b/rcormier/
Twitter:
LinkedIn:
Note: My posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Windows Server 2012 R2 - SharePoint 2013

After an front end server upgrade from Windows Server 2012 Datacenter to Windows Server 2012 R2 Datacenter of our SharePoint 2013 farm, the following error is being experienced when trying to open a document library with Windows Explorer (this
feature worked prior to the upgrade): Message from webpage "We're having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again."
Our domain is in the trusted sites list (*domain.com), the Webclient services are running, and the User Interfaces and Infrastructure > Desktop Experience feature is installed.
It looks like this error was previously remedied with KB2903928. This update doesn't seem to apply to Windows Server 2012 R2 Datacenter.
UPDATE: We have also discovered that site email boxes are not working.
Thank you for your assistance,
Jeanne

Hi,
Glad that the issue was solved.
Meanwhile, please understand that before the release of Microsoft SharePoint Server 2013 Service Pack 1 (SP1), Microsoft did not support the installation of SharePoint Server 2013 in a Windows Server 2012 R2-based environment.
http://support.microsoft.com/kb/2891274/en-au
Regards.
Vivian Wang

Sharepoint 2013 + Windows Server 2012 as reverse proxy

Hello All -
I'd like to ask if anyone has any experience with the new Windows Server 2012 (reverse) proxy, in providing a single sign-on service to Sharepoint 2013.
Scenario:
My client has a Sharepoint 2013 with 3 web applications (portal, teamsites, mysites). All three URLs are available externally via HTTPS only. All clients have AD credentials (no requirement for claims based authentication), although this includes 3 domains
in two different forests (trusts exist). Everything is already configured to allow clients access from domain-joined devices.
My client would like mobile devices (not domain-joined) to be able to access the three web applications without repeated logon prompts. Browser default settings must be used, they do not want to instruct people to perform any configuration on their mobile
device - it all has to work "out of the box" from the client side. Clients will be using iPads and iPhones with Safari, Windows Phones, Androids etc.
I'm considering proposing the use of a reverse-proxy, and rather than using the now depracated Forefront TMG or probably soon-to-be depracated UAG, I would like to jump straight in to the new and very cool looking Windows 2012 proxy server.
It's my understanding that this will provide a single sign-on service in this scenario. I'm unsure whether an ADFS server is also required even for pass-through, the information available is unclear, and also whether any special configuration is required
to a domain controller (DCs in the environment are all 2008R2, with 2008R2 functional level).
I would appreciate it if anyone could give an overview or point me in the direction of some accurate documentation regarding all of the above. Most importantly, if any of my assumptions above seem incorrect, please let me know.
Thank you!
sysadmin

I've heard no supportability statement with SharePoint and the Web Application Proxy (likely because it isn't GA yet). However, it does use ADFS for SSO, so you'll have to SAML-enable your Web Applications. The only downside to this is if you
use anything that is SAML-unfriendly, like PowerPivot [Data Refresh] and at least in 2010, Visio Services and InfoPath Forms Services.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Pop up windows in SharePoint 2013

Similar Messages

Maybe you are looking for