Populate one cell based on the contents of another

Greetings to all
I am entering street addresses into numbers. In an effort to save time I would like the entry into column B to determine what is automatically entered into column C
Example:
If I enter Jones in column B, I want Street to automatically populate column C in the same row
If I enter Smith in column B, I want Avenue to automatically populate column C in the same row.
Thanks in advance for any help.
AJ

I assume that "Jones" is "Jones Street" and "Smith" is "Smith Avenue".
You will need a lookup table with a column containing all of the road names you will be entering, and a second column listing the the matching road type (Street, Avenue, Boulevard, Place, etc.) for each name. Fill the formula shown in the illustration down to all the cells in column C of the Main table.
I've used IFERROR to flag street names that are not found in the table. To omit the "no match" message and instead show an empty cell, change "no match" to "" in the formula.
Regards,
Barry

Similar Messages

Using javascript to populate one menu based on the choice in another menu

I have several menus which are dynamically populated (with PHP and MYSQL). The information is category based. How do I dynamically populate the second menu based on the choice the user makes in the first menu (without having to submit and refresh the page-- i.e. I need to use javascript instead of the server-side PHP).
Example:
Main Categories: 1) Numbers     2) Letters
Sub Categories:        1                      a
                               2                      b
                               3                      c
                              etc.                  etc.
the first menu contains the two main categories. I want the second list to be populated with only the sub categories of the main category the user chooses in the first menu (i.e. 1,2,3 etc. if he chose the main category 'Numbers' and a,b,c, etc. if he chose the main category 'Letters')
Is there an easy way to do this in Dreamweaver?
Thanks,
YWSW

How many items do you have in each dropdown? If it's a small number, you can download all of the options for the second dropdown and use client side javascript to filter based on the choice of the first dropdown. If the number is large, you'll need to use AJAX to dynamically pull the related items from the database.
Search the web for "dependent dropdown" or "cascading dropdown" for some technical details.

Changing content of one label, based on the content of another

Hello all,
I need some advice on how to go about doing something that should be simple.
Basically, I have two labels, that will be used in a marquee animation. When label one gets changed, I want label two to mimic label one's content. Since there is no ContentChanged Event for labels, I have been relying on the SizeChanged event of label one
to do the job.
However, the issue arises when label one's content extends past that of its parent container, thus no longer firing SizeChanged.
When label one's supposed length is equal to or greater than that of its container, is when I would start the marquee animation.
Basically, I need a sure fire, reliable, 100% accurate way to update label two's content to match that of label one's despite its length.
I have read the following: Label.Content Changed Event
However this does not solve the issue, as the event fires for "all" custom label classes, due to the ContentProperty being declared Static/Shared.
Thanks in advance!

<UserControl x:Class="CustomControls.UserControls.ValidationUserControl"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
mc:Ignorable="d" Height="36" Width="120">
<Grid x:Name="z">
<TextBox x:Name="txtBase" Text="TextBox" Margin="0,0,0,13"/>
<Label x:Name="lblStatus" Content="Status" HorizontalAlignment="Left" Margin="5,0,0,0" VerticalAlignment="Bottom" FontSize="10" Foreground="#FFE12828" FontWeight="Bold">
<Label.Effect>
<DropShadowEffect BlurRadius="5" ShadowDepth="1"/>
</Label.Effect>
</Label>
<Label x:FieldModifier="Friend" x:Name="lblMarquee" Content="{Binding ElementName=lblStatus, Path=Content}" HorizontalAlignment="Right" Margin="0,23,-29,0" FontSize="10" Foreground="#FFE12828" FontWeight="Bold" Background="Transparent" Height="13" VerticalAlignment="Top">
<Label.Effect>
<DropShadowEffect BlurRadius="5" ShadowDepth="1"/>
</Label.Effect>
</Label>
</Grid>
</UserControl>

Display an exception on one keyfigure based on the value of another key fig

Hello all,
How to run a exception based on some condition i.e
i want to highlight the sales(key figure) which r less than the average sales..
where sales and average sales r keyfigures...
i also created a cal key fig which has has value 1 if sale > avg sale...
i.e How do i display an exception on one keyfigure depending on the value of another keyfigure??
plz reply its urgent...
thnx in advance...

Hello Ajay, did you got an answer for your problem? I'm interested...
Thx Masen
Edited by: Masen-Fuad Marei on Nov 25, 2009 6:26 PM

[ADF BC] Showing a list of values based on the contents of another list

I have tried to make a simplified example to illustrate what I want to do. Here is a picture of my example schema:
Example Schema Image
There are three entity tables: Employee, Department and Location.
There are also two intersection tabels: Employee_Location and Department_Location.
My ADF BC model layer is based on this schema.
What I am trying to do is have a creation process for an employee where you first fill in the employee details (forname and surname), then you assign the employee to a department, then - based on the locations assigned to the department - assign one or more locations to the employee.
Imagine that the employee is a door-to-door salesman and that each department in is company has several areas of a town that they cover (locations). Each employee will cover a subset of the locations that the department covers.
The first two steps are easy - the details page can be created using a form on the employee view and the department assignment can be done with a list of values drop down on the departments view.
The third step is a little more complex. You can use a shuttle to assign one or more locations to the employee, but you shouldn't just show a list of all locations, since some of these will not be covered by the department and therefore not be available to the employee. What I want is only the locations associated with the employee's department to appear in the list.
So my question is how do I model this using ADF Business Components?
Also, if an employee is allowed to be assigned to more than one department (adding another intersection table between the employee and department tables), how would I model that?

Hi,
For your reference variable name should be simply any name i.e resorts_resort.No need to put @ in front when declaring variable and to refer presentation variable you should use the below syntax
@{Variable_name}{Default_value} where default_value is some default value you want to give.
Now coming to your problem you can fulfill your requirement by simply checking constrain checkbox.If you choose all values instaed of SQL results constrain checkbox will appear.Approach followed by you should also work but constrain is an easy option.
Thanks
Sandeep
Edited by: Sandeep Saini on 10-Sep-2010 00:59
Edited by: Sandeep Saini on 10-Sep-2010 00:59

DYNAMIC INTERNAL TABLE CREATION BASED ON THE CONTENT OF ANOTHER INTERNAL TA

Hi All
I need to create an internal table at runtime.
I have a selection screen parameter which is specific to country, Which can take values below
eg:- IT_AREA for Italy(IT)
FR_AREA for France(FR)
IE_AREA for Ireland(IE).....And similary for other countries
Based on the Above parameter, I need to create Internal Table as below
DATA: itab TYPE italy_data Occurs 0.
If I declare as above, Then itab has fields from italy_data. And this internal table i will be sending it to Function Module to get data into it.
My Requirement is to Create the Internal table itab during runtime for tables italy_data OR france_data OR ireland_data based on selection screen parameter. Tables on Country may have different number of fields in it.
Can anyone help me on this??

Hi,
Here is a sample code to create a dynamic internal table.
REPORT ytrab03.
TABLES: mara, makt.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
DATA: e_params LIKE zutsvga_alv_01.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
PARAMETERS: p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
is_fcat-fieldname = 'COL01'.
is_fcat-ref_fieldname = 'MATNR'.
is_fcat-ref_tabname = 'MARA'.
APPEND is_fcat TO it_fcat.
is_fcat-fieldname = 'COL02'.
is_fcat-ref_fieldname = 'MAKTX'.
is_fcat-ref_tabname = 'MAKT'.
APPEND is_fcat TO it_fcat.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
CONCATENATE is_fieldcat-ref_table is_fieldcat-ref_field
INTO vg_campos SEPARATED BY '~'.
APPEND vg_campos TO i_campos.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
SELECT (i_campos) FROM mara INNER JOIN makt
ON mara~matnr = makt~matnr
UP TO p_max ROWS
INTO TABLE <l_table>.
LOOP AT <l_table> INTO <l_line>.
LOOP AT it_fcat INTO is_fcat.
ASSIGN COMPONENT is_fcat-fieldname
OF STRUCTURE <l_line> TO <l_field>.
IF sy-tabix = 1.
WRITE: /2 <l_field>.
ELSE.
WRITE: <l_field>.
ENDIF.
ENDLOOP.
ENDLOOP.
Regards,
Karuna.

Looking to set the result of a variable based on the content of another (new to scripts)

Hi,
I'm new to scripts, new to acrobat forms to be honest, so be gentle with me
I have a text field Acc1pnt which can accept either Y or N as an entry. Based on the answer, text field Acc1snd would always be N/A if the result of Acc1pnt is N. I'm looking for a script that will add N/A to the second text field and skip over it (make read only?) if the answer to the first field is N.
Sorry if I'm making this look like hard work. Basically a check is made as to whether an accessory is received and, if it is, whether it is 'sound' or 'damaged'. Obviously if it isn't received then it's condition is irrelevant hence N/A in the senond text field.
Also, is there something simple I can add to convert an entry to a capital letter?
Thanks in advance
Cliff

Hi Gilad
I've shied away from radio buttons as the users are used to tabbing through the fields and 'clicking' a radio button would mean taking their hands from the keyboard, I will certainly consider it though.
Acc1snd (the 2nd variable) should be editable ONLY if the answer to Acc1pnt (the 1st variable) is Y. If the value of the 1st variable is N then Acc1snd can only be N/A (not applicable) and should not be editable.
Obviously if the user makes an initial mistake and needs to change the value of the 1st variable to Y then the 2nd variable would then need to be editable.
I will run through the tutorials this evening

The drop down list values want to vary based on the contents of another drop down field

hi,
hi in search page i have two drop down list. i have two tables and one mapping tables. service line and subservice line are tables and i have one mapping table. using rapid application i create one component using mapping table. now in search page i have two drop list. one is servline and another is sub serviceline. in service line i have values like 1,2 k for subservice 3,4.5,6 for one service line ex. for 1 i have two subservice 3,4 and for 2 i have 5,6. now my requirment in if i choose service line 1 in first drop down list, automatically in second drop down list want to contain values 3, 4. before both the drop down list have values.if i chose one value the correponding mapping value want to come in drop down list in same context node.

Hi,
This requirement involves defining p-getter for the service type, and the v-getter of you sub type.
Since this involves to populate the values of subtype attribute depending on value of service type, u need a round trip.
This is done in the p-getter of the 1st attribute(service type in your case).
In the v-getter of the 2nd attribute, 1st fetch the current value of attribute 1, then filter the value in the dropdown table according to ur logic.
Ref :Drop down values in table view
Regrads
Anish

How to calc sum of one column, based on the condition of another column?

I would like to create a formula that adds up the total cost from column F for each specified service in column D. For example, the result for PM (project management) would be $495. Any ideas?

I think you could use this formula, using your cell references:
=SUMIF(D4:D21,"=CM",F4:F21)
Then, change the "=CM' to "=PM", etc. for each service.
Like JaxJason, I can't test this in Numbers right now, but it works in Excel, and the functions are identical.
SUMIF(test-range, "condition", [sum-range]):
* test-range: A reference to the range of cells containing values to test. Must be the same dimensions as sum-range.
* "condition": Any comparison statement that results in a logical TRUE or FALSE value.
* sum-range: Optional; a reference to the range of cells containing the numbers to be added. Must have the same dimensions as test-range. If omitted, test-range is used.
I hope this helps.
- Michael
Message was edited by: Apple fan Michael

How to modify F4 help of one parameter based on the value of another?

Hi,
My Query is as follows:
I have 3 select-options / parameters on the selection screen.
If I enter some value in the first parameter the values in the second parameter should reflect accordingly.
For example: The 3 selection-screen parameters are:
select-options: s_werks for pa0001-werks no intervals,
                      s_btrtl for pa0001-btrtl no intervals,
                      s_kostl for pa0001-kostl no intervals.
On exceuting the report, say I do a F4 and select '1000' for the first parameter (s_werks).
Now after selecting the value for the first parameter if I do a F4 on the second parameter (s_btrtl) then it should prompt me with a F4 help containing values only corresponding to '1000' entered in s_werks and not all the values maintainined for btrtl.
I have tried AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_BTRTL-LOW.
And then used the FM F4IF_INT_TABLE_VALUE_REQUEST.
But At Selection-Screen On Value Request the selection screen parameter s_werks does not show any value. It reflects the value only once it reaches Start-of-selection.
Can anyone please guide me how to go about it?

hi
Please do it in this way..
TABLES: pa0001.
select-options: s_werks for pa0001-werks no intervals,
s_btrtl for pa0001-btrtl no intervals,
s_kostl for pa0001-kostl no intervals.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_BTRTL-LOW.
PERFORM sub_pop_btrtl .
*&      Form sub_pop_btrtl
      text
--> p1        text
<-- p2        text
form sub_pop_btrtl .
DATA : l_wa_dynp TYPE dynpread,
        l_i_dynp TYPE STANDARD TABLE OF dynpread,
        l_wa_temp LIKE LINE OF S_werks.
REFRESH s_temp[].
l_wa_dynp-fieldname = 'S_WERKS-LOW'.
APPEND l_wa_dynp TO l_i_dynp.
Get the screen values of template
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = l_i_dynp
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc <> 0.
Do Nothing
ENDIF.
Put the screen value in the select-options
READ TABLE l_i_dynp INTO l_wa_dynp INDEX 1.
l_wa_temp-sign = 'I'.
l_wa_temp-option = 'EQ'.
l_wa_temp-low = l_wa_dynp-fieldvalue.
Now you use l_wa_temp as plant field
endform.                    " sub_pop_btrtl

Conditionally Formatting One Column Based On The Value of Another Column

I have the following requirement:
I have 2 columns in a report showing Actual Sales & Budget Sales each year. I am using a bar chart to show the different values for these 2 columns.
I need to conditionally format the column "Actual Sales" so that if it is less than the "Budget Sales" it will appear in red, and green if "Actual Sales" is greater than "Budget Sales." So in a nutshell,
CASE WHEN "Actual Sales" < "Budget Sales" THEN
RED
ELSE
GREEN
END
Thoughts anyone?

CASE WHEN (COL1 - COL2) < 0 then Red else Green end
regards
John
http://obiee101.blogspot.com

Conditional format of one cell based on contents of another cell

Preparing list of appointments for visitors with time for each. There are four possible status categories for visitors based on projected activity and whether they have shown up or not. (A Group Scheduled, A Group Showed, B Group Scheduled, B Group Showed). I've created the calendar in iCal with different calendars, then accessed that through Bento iCal Events. Bento adds the column with name of calendar from iCal. Info is now in Numbers. (iWorks 09)
It shows Title, Start Date, Location, Calendar. I'm adding more fields using Lookup in Numbers drawing on entire data base brought over from Bento. I'm trying to get what info I need, but none that I don't, so the form isn't too crowded and busy.
I would like to be able to conditionally format the Time column based on the contents of the Calendar column. If successful, the color of the Time column would tell me all I need to know about visitor status, and I could hide the Calendar column and clean up the form.
I hope I've described it adequately. Can this be done, and if so, how?
Thanks! Have a great Thanksgiving!

jpcranch wrote:
Does it work to format two cells based on contents of one of them?
Conditional formatting of a cell depends on the contents of that individual cell, compared with another value, so no.
But you could use a two-table approach.
In general terms, the technique is to:
• make the original table's cell fill transparent,
• Add a second table to the sheet,
• Set the second table to copy the control values into a column of cells,
• Select the cells in that column of Table 2,
• Apply conditional formatting rules for each possible control value (see below)
• Set the text opacity for these cells to 0 (full transparency),
• Click on Table 2 in the sidebar, then use (shift and) the arrow keys to slide Table 2 behind Table 1 to align the highlighted cells with the cells to appear highlighted in Table 1.
• Set the colour of the cell borders on table 2 to none.
Using the information you gave regarding the calendar column, you'll need four rules for conditional formatting of this column. All are of the same format:
Text contains: A Group Scheduled
With the text changed to match each possible entry.
Regards,
Barry
BTW: by changing the width of the formatted column on table 2, you can appear to highlight as many columns as you wish on Table 1.

Can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF

can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF?

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

Duplicate checking based on the content of the incoming file

Hi,
We have a requirement where in we have to check whether a file has been duplicated or not based on the contents of an incoming file.The threads which I have seen in SDN deal with the duplicate checking based on the filename of the incoming file.
The incoming file has the following structure :
Recordset                                     Occurance-1
       |....... Idoc                              Occurance 1...unbounded
                   |...... segment             Occurance 1
We are required to make a check based on certain fields which occur in the segment.There are about 4 fields which we will have to take from the incoming file and carry out the check.These 4 fields exist in different segments.We will have to update a ztable with these 4 fields and then perform an rfc lookup to check for the contents of the incoming files with this table,and reject or process the file based on whether the entries exist in the table or not.
Please let me know if there is any way this can be achieved.
Appreciate if anyone could help me on this.
Thanks and Regards,
Induja

SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
Use this crazy piece for any RFC Mapping Lookups!
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5877---- [original link is broken] [original link is broken] [original link is broken]
Imp
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API
The specified item was not found.
The specified item was not found.
Making CSV File Lookup Possible In SAP XI !!!
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1888-----Imp [original link is broken] [original link is broken] [original link is broken]
Triggering XI Alerts from a User Defined Function
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II

Searching based on the content of an uploaded document

Hi,
Is it possible to search based on the content of the document I have uploaded. The system used is ECC 5.0.
Eg : I have uploaded resumes of employees and I have search based on their skills. Is it possible to search based on the skill which is mentioned in the resumes and provide the output.
Thanks,
Sarath.C

I can't do that without knowing the structure of your document, it all depends on wether the data you need is in a fixed position in a fixed line or it's in a variable position and the correct line or position needs to be found before using it.

Populate one cell based on the contents of another

Similar Messages

Maybe you are looking for