Populating deliv.add on po line item through inbound idoc

I could not populate delivery address on to po line item in backgroun i.e., through inbound idoc. please help , its a bit urgent.

Hi.
I have one PO 4500000001 for which I have created the inbound delivery 180000001. This inbound delivery has been created through an IDOC. I have another PO 4500000002 having one line item. Now i want to add another line item into the inbound delivery 180000001 for the PO 4500000002 as second line item. To add a second line item to the existing inbound delivery, which IDOC type should I use.
Hope it clarifies the requriement.
Thanks & Regards
Satya

Similar Messages

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

Idoc Type to add a new line item to existing Inbound delivery

Hi Friends,
we have one requirement.
In the system Inbound delivery is created through Idoc. Once the inbound delivery is created, we need to change that inbound delivery by adding a new line item to that inbound delivery where the line item belongs to another PO. Means, I have an existing inbound delivery number for a PO having one line item. Now I want to add another line item into the inbound delivery for another PO. I have created the inbound delivery through Idoc using the idoc type DESADV. Now I want to change the inbound delivery for adding the line item. Can anybody please tell me which idoc type should I use for this above highlighted requirement?
Thanks & Regards
Satya

Hi.
I have one PO 4500000001 for which I have created the inbound delivery 180000001. This inbound delivery has been created through an IDOC. I have another PO 4500000002 having one line item. Now i want to add another line item into the inbound delivery 180000001 for the PO 4500000002 as second line item. To add a second line item to the existing inbound delivery, which IDOC type should I use.
Hope it clarifies the requriement.
Thanks & Regards
Satya

How to add a new line item to a Purchase Requisition number

Hello All,
Can anyone please provide me with some FM or BAPI to add a new line item to an existing Purchase Requisition number.
Can it be done using BAPI_REQUISITION_CHANGE; if yes, then how do I pass the parameters into the BAPI tables..?
Useful pointers would be appreciated...!!
Thanks & Regards,
Tarun Gambhir

@Gautham,
Thanks for the quick reply.
I want to update the table EBAN, so should I use the parameter table XEBAN to put in the new line item and then execute..
Also to fill up this table I need to pass certain value, so can I use BAPI_REQUISITON_GETDETAIL and pass the same details as found from the same BAPI and create a new line item...
Regards,
Tarun Gambhir

Add or Delete Line Item in Billing Creation (VF01)

Hi,
During the billing document creation (VF01) for Order-Related Billing (example: Doc Type F5 - Pro Forma for Order), can you
manually add or delete line items?
Let's say if Sales Order was created with 3 line items and only 2 line items should be included in Billing Doc F5. During the
billing document creation (VF01), it automatically copies all 3 line items. How can I delete the line item that I don't want
to be included in Billing Doc F5? Only way that I know is to put a billing block on Sales Order item so it won't automatically
copied into a billing document. But this process is inconvenient. After F5 document is created, my user will then need to
remember to go back to Sales order and remove a billing block from that line item.
Also vice verse, can an item be manually added to a billing document during the creation mode (VF01)? Is there somewhere
in the configuration that I can change to allow this? Or is it a standart SAP practice all items on a billind document have to
be Order or Delivery-Related?
Thanks,
Michelle

Hi,
While creating the invoice via VF01. Please go to selection list icon. this will take to you another screen. here you can select the line item you want to copy/bill.
Please try and let us know.
Thanks,
Vishal

List of Customer Line Items through F.21

Hi,
I am trying to generate a list of customer line items through F.21 and I am using ECC6. I noticed that other tick boxes (line items required, subtotal, total by currency, total per business area, etc) for output control that we used to have in 4.7 are missing. We are need these tick boxes. Is there any way that we can bring back those options in the selection screen? Please advice.
Thank you!

Hi,
The tick boxes (line items required, subtotal, total by currency, total per business area, etc) are taken away in F.21 selection screen of ECC. These functions/details are provided in report output of ECC. In ECC, there are several new Icons viz. sort by ascending/descending order, Filter, Layout create/change, etc. are provided. These Icons were not there in 4.7.
You can create a required layout (total per business area, total by currency, etc.) through "Filter", etc. in ECC. This layout you can enter in selection screen of F.21 so the report output will be displayed for this layout.
So you do not require those check boxes in selection screen of ECC.
Rg,
ADI

How to add a new line item when i click on UPDATE in orderpage B2B webshop?

Hi Gurus,
I need to add a new line item based on some condition when i click on update in the order page in b2b web shop. Is there any way to pass some parameters to the BADI crm_isa_basket_items and create a new line item when i update? If so can you please tell the parameters that i need to pass to the badi.
Any help will be highly appreciated!!!!!
Thanks in advance,
Lakshman.

You can put condition when you call java script function while clicking on "update" button.
On order.jsp update button call "submit_refresh()" java script function. You can check your condition over here.
You can find this function in "orderTools.js" file.
And when you enter item in last line on order page and click on the update button it will automatically add new empty lines on your order page as per your selected new line items from drop down box.
Or may be you can call your custome action class when you click on update to check particular condition.
I hope it will help you.
Thanks and Regards.
eCommerce Developer

Undeletion of line item through ME22N

Hi all,
In PO i have a line item for which GR and invoice reciept is done. Deletion indicator is set for this line item. Now when I am trying to undelete the line item it is giving error as " Order unit cannot be changed"
But when I am Undeleting it through ME22 it is allowing to undelete it . Why so?
How can I undelete the line item through ME22N.
Thanks and Regards
Chetan

what changes are made to the PO before this message comes up.
What changes do you you have in the PO at all?
the message is triggert in SAP include MM06EF0M_MASSEINHEITEN
And SAP compares and old unit with a new unit.
And in case your PO has already been quantity or invoice received then it will not allow the cahnge.
Debug the include wenn the message is triggert and compare the 2 unit fields.
See OSS note 662054 and 655365. They explain some circumstance when the message is issued.

How to upload a file which has more than 999 line item through BDC ?

Hello Techards
Hi to all
Can any body tell me how to upload a file which has more than 999 line item through BDC for traction F-02 ?
Thanks in advance.
Shovan

Hello Shovan,
You split it up to post two accounting documents with the help of a "suspense" a/c.
Say, you have to post the following line items below:
line 1 - dr. - GL a/c X - $1000
line 2 - cr. - GL a/c Y - $1
line 3 - cr. - GL a/c Y - $1
line 1001 - cr. - GL a/c Y - $1
You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
Doc1
line 1 - dr - GL a/c X - $1000
line 2 - cr - GL a/c Y - $1
line 3 - cr - GL a/c Y - $1
line 998 - cr - GL a/c Y - $1
line 999 - cr - SUSPENSE a/c - $3
Doc2
line 1 - dr - SUSPENSE a/c - $3
line 2 - cr - GL a/c Y - $3
Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
Hope this helps,
Cheers,
Sougata.

Populating BSEG-ZUONR for GL Line item

Hi experts,
I need the system to copy field VBRK-ZUONR to BSEG-ZUONR when posting a billing document. The situation is as follows:
- When I post the billing document to accounting BSEG-ZUONR is populated for the customer open item but
- BSEG-ZUONR is BLANK for the Sales Revenue line item
This only seems to occur when I define SORT KEY 000 against the G/L Account Master (SKB1-ZUAWA). Sort Key 000 is for Allocation number (which points back to ZUONR). If I use a different SORT key (such as posting date) it works perfectly (copies the posting date to BSEG-ZUONR).
Is there something I am missing in configuration/user exits that need to be switched on?
There was a mention somewhere about using function module EXIT_SAPLV60B_004 but i cannot find this program in program SAPLV60B.
Other information:
- I am in SAP 7.0
- There is no FI consultant on site to help
- I have search through WIKI to find a suitable answer for this problem but do not seem to get the exact information.
Your help is very much appreciated.
Thanks,
Rubi

Hi,
Lakshmipathi and Shiva are right. The easier manner to solve it is with OB16.
If you want know more about the exit that you try to use, see Note 301077 - User exits for the interface to accounting. Use the table MODSAP to find the link between enhancement and components (function modules EXIT_*).
Regards
Eduardo

Advance ajdustment for Vendor line items through F110

Hello
We have to make advance ajustment through F110 for the Vendor line items . Advance is posted with special indicators through F-48 and invoice booked through FB60 and MIRO.
I have checked the configuration in FBZP "All Company Codes" where special indicators is assigned. Still advance is not getting adjusted.
Please help me to resolve this issue.
Regards,

Hello Prashant,
Check F110 Addtional log tab > Due date check box & also check F110 > Parameter > Next payment date it should be more that what you expecting due date selection
Rgds
Suma

Incoming Payment - Posting more than 999 line items through EDI

Hi guys,
I having following issues.
1. incoming 820 is not posting into customer a/c even I configured processing - REMC but creating payment advice
2. once i tried to process payment advice by using f-28 it is posting in to custmer a/c without payment advice ref. also the payment advice still exist in the system.
3. trying to post payment advice having more than 999 items by using f-28 system shows error after 999 items.
4. I tried to process payment advice executing through RFAVIS40 error displays "Payment advice note in Customizing not defined for posting"
I appreciate if some one guide me to solve above.
Thanks,
RK
Message was edited by: RK Talabathula

Hi RK,
Pt 3: There is an SAP Notes on this issue 117708 ,
also refer Re: F-44 - Clearing of more than 999 line items
Pt 4: Check OSS note 17449 see for "Payment
advice upon form overflow"
hope this helps.
Please assign points as way to say thanks
Ravi Rana

Unable to create PO with multiple line items through LSMW-BAPI method

Hi All,
I have a requirement of creating PO through LSMW. I can't use LSMW standard batch input program since there are some fileds not available and also it has many limitations. I'm using LSMW-BAPI method ( Business object BUS2012) which create IDOC and uses BAPI_PO_CREATE1 to ultimately post the PO in the system. I am trying to create PO from a single file which contains both Header and Item data.
Now my problem is that everytime PO is being created with Single line item only. Everytime I am giving multiple item data in the source file LSMW is preparing multiple IDOCs for multiple line items. As per my understanding this is happenng since header and item is in the same hierarchy level of IDOC type PORDCR102 and the control record is inserted for every line item in the source file.
It seems that through LSMW-BAPI it is not possible to create PO with multiple line items. Can anybody provide some input regarding this? Thanks in advance.
BR,
Atanu Mukherjee

Solved by myself.
Earlier the problem was that LSMW was not being able to recognize items under same header. It was creating new IDOCs every time it gets a new item. To enable this we need to create two structure HEADERDATA and ITEMDATA. Two additional identifier fields with identifier value 'H' and 'I' should be added in these two structures respectively. Then we need one sequential file with the identifiers field followed by the header and Item data. Example:
H~header data
I~item data
I~item data
This would help the standard program to understand what are the items under same header and ultimately create PO with multiple line items.
BR,
Atanu Mukherjee

Issue in Delivery Line Item through VL01N

Hi,
During Delivery creation through VL01N, in Line Item details under Financial Processing Tab, Cost Center is showing as non-changable... We cann't enter any value in this field..
We have two options--
1. By make the field as changable, so that we can enter the related cost center.
2. Automatic Cost center should should according to Profit center...
Please provide the best solution...
Thanks..

hi
cost center its comes from setting related , it related with business area , it delivery its not possible to enter cost center ,
it is totally related with fico ,
so first you maintain the cost element , it cost element you can check previous delivery document accounting , goto delivery goods issue document document( mb03), click on display document , ofter click on accounting document , her double click on accounting document , system sows , accounting for debit and credit here g/l account and cost element account you can find,
goto okb9 , and select your company and cost element ,click on valuation area/business area based , here you plant and business area ,cost center find,
in delivery no need direct enter the cost center , its automatic picking when you click on PGI,Updating at mb03,
please check this , and also you contact your fico consultant

Need to Create Line Items through CRM_ORDER_MAINTAIN

Hi all,
I need code for creating Line Items with product and Quantity through CRM_ORDER_MAINTAIN,
I am able to create header and the partner data through CRM_ORDER_MAINTAIN.
Suggest the solution.

Since you have already used the function module CRM_ORDER_MAINTAIN for partners, it shouldn't be difficult for you to use it for more sets of data. Well, the idea is to know what is required to be filled in the input fields and keys. There is a report program CRM_ORDER_READ. Use this with an existing transaction that contains the type of data you want to know about. You will get lot of insight into the data required to for any set of data.
Also, see this thread for some sample code
Set item, partner data of sales order using BAPI_BUSPROCESSND_CREATEMULTI

Populating deliv.add on po line item through inbound idoc

Similar Messages

Maybe you are looking for