Populating internal table field with same value
Is there syntax that will fill a field value in every record in an internal table without looping?
Hi Rob,
I didn't know this, after studying online help on MODIFY itab, ABAP Statement
MODIFY itab - itab_lines
Syntax
... itab FROM wa TRANSPORTING comp1 comp2 ... WHERE log_exp.
I tried
DATA:
ls_t100 TYPE t100,
lt_t100 TYPE TABLE OF t100.
SELECT * INTO TABLE lt_t100 FROM t100 UP TO 20 ROWS.
MODIFY lt_t100 FROM ls_t100 TRANSPORTING text where text <> ls_t100-text .
clears field text in all rows of lt_t100.
after many years of field-symbols finally a reason to use MODIFY again
Regards,
Clemens
Similar Messages
-
How to populate dynamic internal table fields with data??
Hi Folks,
How to assign a particular internal table field to a dynamically assigned internal table?
I have an excel sheet, and i upload the excel sheet data into an internal IT_EXLOAD table using FM ALSM_EXCEL_TO_INTERNAL_TABLE
Now i created a dynamic internal table which has the same column as in my DB table.
I have to fill the dynamically created Internal table with the IT_EXLOAD data dynamically.
Suppose in future if i add some field in DB table and for that field if i add some column in excel sheet there is no need to change in the program.
Looking for reply...
Best Regards,
Sayakhi,
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_path
i_begin_col = '1'
i_begin_row = '2'
i_end_col = '2'
i_end_row = '1000'
TABLES
intern = intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
*declare intern_tmp as internal table tb_data in wich you want the data
*and declare a field symbol <fs_123>
LOOP AT intern.
ASSIGN COMPONENT intern-col OF STRUCTURE
intern_tmp TO <fs_123>.
IF NOT <fs_123> IS ASSIGNED.
CLEAR intern.
CLEAR intern_tmp.
CONTINUE.
ENDIF.
<fs_123> = intern-value.
AT END OF row.
CLEAR tb_data.
MOVE-CORRESPONDING: intern_tmp TO tb_data.
APPEND tb_data.
CLEAR intern_tmp.
ENDAT.
CLEAR intern.
ENDLOOP.
**paste this code and you can see the data in ur tables dynamically.
Thanks
Nitin Sachdeva -
How to populate internal table field with text data?
Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test, IO Test 1, CHAR, 20
ZEA_IO2, CHA, IO Test, IO Test 2, CHAR, 20
Here is the Code:
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = SPACE
HEADER_LENGTH = 0
DAT_MODE = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
I appreciate your help.
Regards,
MauI have used tab delimited file.
Here are file contents
io_name io_type io_txsht io_txlng io_datatype io_length
ZEA_IO1 CHA IO Test IO Test 1 CHAR 20
ZEA_IO2 CHA IO Test IO Test 2 CHAR 20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish -
Searching a Table field with multiple values using a shuttle item
Hello All,
I have a shuttle item whhich of course users can select multiple values:
eg: Orange:Pear:Banana
Now I have a table where I want to get the Crate Numbers where these fruit items reside.
The Fruit field has multiple stored values
eg:
Crate Fruits
=== ====
12487 Apple:Orange:Pear:Banana
17653 Orange:Pear:Grapes
12874 Apple:Banana
13655 Grapes:Watermelon:Pineapple
87643 Pear:Banana
53626 Strawberries:Apple
I would like to see a final report similiar to this
Crate Fruit
=== ===
12487 Orange
12487 Pear
12487 Banana
17653 Orange
17653 Pear
12874 Banana
87643 Pear
87643 Banana
I thought maybe this needs to be done using collections but I am not familiar with this function, if their is another way I would appreciate it
Hope u can help
FrankHi Frank,
I find that in this sort of case, it is easier to create a link table containing the individual values rather than lumping them into one column.
so the data is stored in the 'Crate, Fruit' format, rather then the 'Crate Fruits' format.
It is a bit more work maintaining the link table when the values are amended and populating the shuttle, but it is a 'proper' relational table then.
Regards
Michael -
Dont show fields with same value as previous row.
Hi, If I have a table like this:
DEPNO_MONTH__COST__ID
10_____ Jan______100___ 2
10_____ Jan______200___ 4
10_____ Jan_______50____3
20_____ Feb______30____4
30_____ Jan ______30____5
30_____ Feb______40____6
I need a select that shows the table like this:
DEPNO_MONTH_COST_ID
10______Jan_____100___2
________________200___4
________________50____3
20______Feb_____30____4
30______Jan_____30____5
________Feb_____40____6
Can someone please help me? (ingore underscore)
/Sörenlike this ?
SQL> select decode(rno1, 1, depno, null) depno,
2 decode(rno2, 1, mon, null) month,
3 cost, id
4 from (select depno,
5 mon,
6 row_number() over (partition by depno order by depno, mon, cost ) rno1,
7 row_number() over (partition by depno, mon order by depno, mon, cost ) rno2,
8 cost, id
9 from t1
10 order by depno, mon, cost );
DEPNO MONTH COST ID
10 Jan 50 3
100 2
200 4
20 Feb 30 4
30 Feb 40 6
Jan 30 5
6 rows selected.
SQL>
[pre] -
Assigning value to Field - Symbol ( which is type of internal table field )
Hi All,
I am facing problem to assign the value to a field symbol. My requirement is creating a dynamic internal table and populate values into that internal table, so that i can display the values .
I am having a structure with fields like status , Plant1 name , Plant2 name.....Plant n .
So i declared an internal table it_tab with this structure.
I am having one more table which having number of records for Plant1 ,Plant 2 ,....Plant n based on some condition.
I need to count the number of records for Plant1 and i need to put in the internal table it_tab.
For this i created field-symbol .
Here, t_deployment table will have the plants 1,2,3...and
t_devobject will have some records for these plants.
LOOP AT T_DEPLOYMENT.
clear w_count.
LOOP AT T_DEVOBJECT WHERE ZDEPLOYMENT = T_DEPLOYMENT-DOMVALUE_L AND
ZADSTATUS = '10'.
w_count = w_count + 1.
ENDLOOP.
concatenate 'it_tab-' t_deployment-domvalue_l into var_bet_name.
assign var_bet_name to <bet_var_name>.
now my internal table field i.e. it_tab-plant1 came into <bet_var_name> . But i want to assign a value for it.
at last what i need is it_tab-plant1 = w_count.
whaterver the w_count has value that needs to assign to it_tab-plant1. But i don't want to assign directly it it_tab-plant1. I want to assign dynamically. Because tommorrow some more plants added to t_deployments , i don't want to make changes to my program. It should take care....w/o changing the program.
I tried the following statement.
(<bet_var_name>) = w_count. But its not working.
Please let me know how i can get this.
Thanks in Advance.
Pavan.Hi pavan,
As ur requirement is creating a dynamic internal table,
try the following way,
remember the fieldcat should be of type LVC not SLIS.
BUILD LT_LVCFIELDCAT in a way that, the value from the internal table becomes the fieldname
ex:-
loop at it_models INTO WA_MODELS.
LS_LVCFIELDCAT-FIELDNAME = WA_models-MODEL.
LS_LVCFIELDCAT-SELTEXT = WA_models-MODEL.
append ls_lvcfieldcat to lt_lvcfieldcat.
endloop.
DATA: DREF TYPE REF TO DATA,WA_REF TYPE REF TO DATA.
FIELD-SYMBOLS: <TEMP_TAB> TYPE TABLE, <TEMP_WA> TYPE ANY.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = LT_LVCFIELDCAT
IMPORTING
EP_TABLE = DREF.
ASSIGN dref->* TO <TEMP_TAB>.
now basing on the fieldcatalog <temp_tab> is build.
NOW FILL <TEMP_TAB>.
WHILE FILLING, ASSIGN COMPONENT IDX/NAME.....
this statement will be very usefull.
i hope this will be help full.
pls reward the points if it helps u.
regards
Hyma -
Read Internal Table based on Multiple Values for Key Field
Hi Gurus,
i have one query can you tell me how read an internal table it_kna1 for multiple values of land1 DE US IND etc.
i had tried as below but i could not can you try and let me knwo at the earliest.
here i want read the values with DE or US and want further prosess them.
REPORT YC001.
tables kna1.
select-options: cust for kna1-kunnr.
data: begin of it_kna1 occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
land1 like kna1-land1,
end of it_kna1.
select kunnr name1 land1 into table it_kna1 from kna1 where kunnr in cust.
read table it_kna1 with key land1 = ( 'DE' OR 'US' ) .
can anybody suggest me some solution.
Thanks,
Jeevi.This should be what you need:
REPORT ztest NO STANDARD PAGE HEADING LINE-SIZE 80 MESSAGE-ID 00.
TABLES kna1.
SELECT-OPTIONS: cust FOR kna1-kunnr.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA: itab_index LIKE sy-tabix.
SELECT kunnr name1 land1
INTO TABLE it_kna1
FROM kna1
WHERE kunnr IN cust.
SORT it_kna1 BY land1.
READ TABLE it_kna1 WITH KEY
land1 = 'DE'
BINARY SEARCH.
itab_index = sy-tabix.
WHILE sy-subrc = 0.
itab_index = itab_index + 1.
WRITE: /001 it_kna1-kunnr, it_kna1-land1, it_kna1-name1.
READ TABLE it_kna1 INDEX itab_index.
IF it_kna1-land1 <> 'DE'.
sy-subrc = 99.
ENDIF.
ENDWHILE.
SKIP 1.
READ TABLE it_kna1 WITH KEY
land1 = 'US'
BINARY SEARCH.
itab_index = sy-tabix.
WHILE sy-subrc = 0.
itab_index = itab_index + 1.
WRITE: /001 it_kna1-kunnr, it_kna1-land1, it_kna1-name1.
READ TABLE it_kna1 INDEX itab_index.
IF it_kna1-land1 <> 'US'.
sy-subrc = 99.
ENDIF.
ENDWHILE.
Rob -
Populating Multirecord text fields from Tlists value's combinations
I have a UI wherein there are two T lists, one on the Left and other on the Right. The left one contains
From values and the Right one contains To values. There's one Button which when Pressed should populate
a Data Block which has multi record text fields just below the button with all the possible combinations of
the T lists elements. The Text fields have the values From, To, Time, Unit. When populated From and Two will
get the values from the combinations and the user will enter the values in other fields i.e. Time and Unit,
Then the user can save the Records.
e.g. If the Left T list contains Red, Blue and the Right T List contains Green, Black. Then on pressing
the button below the T lists, the text fields From and Two of a data block displayed in the same window
should get populated with all the possible combinations as:
From || To || Unit || Time
Red Green
Red Black
Blue Green
Blue Black
Now the user can enter the values for Unit as well as Time and when he does save the Records should be inserted
for the Data Blocks DML Source that's some table.
What I'm trying is:
On pressing the Button i'm writing code that will have Two PL/SQL Tables(Index by binary_integer). One will have
all the values of the left T List and the other with all the values of right T List.
I do it as in the WHEN BUTTON PRESSED as:
DECLARE
TYPE varchar_table IS TABLE OF VARCHAR2(30) INDEX BY BINARY_INTEGER;
from varchar_table;
to varchar_table;
v_count1 NUMBER;
v_count2 NUMBER;
v_count3 NUMBER;
v_count4 NUMBER;
BEGIN
v_count1 := Get_List_Element_Count('CONTROL.FROM_TYPE');
FOR i IN 1..v_count1 LOOP
from(i) := Get_List_Element_Value('CONTROL.FROM_TYPE', i);
END LOOP;
v_count2 := Get_List_Element_Count('CONTROL.TO_TYPE');
FOR i IN 1..v_count2 LOOP
to(i) := Get_List_Element_Value('CONTROL.TO_TYPE', i);
END LOOP;
END;
Now how will I populate the text fields with the values in the tables that i got with the piece of code above.
Any help would be appreciated. Any other method other than the one i'm trying is also welcome. Please note that
i'm not using any table to store the elements in the T Lists. The lists get values at runtime by
user's selection.
Thanks,
Abhishek.Try and stay civil in your postings. The solotion should be to simply issue a GO_BLOCK, followed by a CREATE_RECORD followed by setting the approriate values :block.value = <value from list>
-
Regarding Internal Table Field Validation [Modification]
Hi All,
I have a small issue with formatting of a field.
The Field is POTX1 - it would get the value as 'New MT-EPPE0097-COMP02',
Means i have one internal table field as i_error-POTX1 in that some times we get value as 'New MT-EPPE0097-COMP02'.
Whenever i get 'New' literal in that internal table field i have to remove that literal from that internal table field. And Left Justify the remaining part of the field.
Ex: 'New MT-EPPE0097-COMP02'
should become 'MT-EPPE0097-COMP02'.
For this first i have to find wether 'New' Literal exists in the Internal table field or not then i have to remove it.
Can anybody tell me how can i solve this issue.
Thanks in advance.
Thanks & Regards,
Rayeezuddin.Hi,
Take a look :
loop at i_error.
if i_error-potx1(3) = 'New'
w_potx1 = i_error-potx1.
i_error-potx1 = w_potx1+3(37).
MODIFY i_error.
endif.
ENDLOOP.
Regards,
Erwan.
Message was edited by: Erwan LE BRUN -
How to populate a hidden form field with a value passed from another page
I'm using PHP/MySQL and DW CS4.
I am trying to obtain the external key for a table, and include it as a hidden field in a form for a second table.
The user selects a "need" from a list and is taken to a new page which displays the need selected in the prior page and a form the user can fill out with details of his offer, there should also be a hidden field in this form that contains the index to the needs table, this hidden field holds the external key. Most of the code is working, except for populating the hidden field with the external key. I have proven(by printing it to the screen) that I have obtained the external key and stored it in a variable ($saveNeedId) . What I'm unable to do is assign this variable to the hidden field in the form I'm about to store in a table. Sometimes I get zero and sometimes I get the index to the first need in the table. This ought to be simple but I can't get it to work, I must be missing something obvious - still very new to PHP.
Here's the code that sets up the variable and prints it to the screen for test purposes
$saveNeedId = "-1";
if (isset($_GET['needId'])) {
$saveNeedId = $_GET['needId'];
print $saveNeedId;
Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
<input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
<input type="hidden" name="offerId" value="" />
<input type="hidden" name="MM_insert" value="form1" />
The page where the user sees the list of needs is here www.hollisterairshow.com/weneed.php
I'd really appreciate sone help with this, I've tried all combinations of double quotes, percent signs and nothing works...sigh.
TonyHere's the code that sets up the variable and prints it to the screen for test purposes
$saveNeedId = "-1";
if (isset($_GET['needId'])) {
$saveNeedId = $_GET['needId'];
print $saveNeedId;
Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
<input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
<input type="hidden" name="offerId" value="" />
<input type="hidden" name="MM_insert" value="form1" />
<input type="hidden" name="needId" value="<?php echo $_GET['needId']; ?>" />
I looked at your page. It looks like you figured it out. -
An internal table field has been defined too small
Hi,
We are getting a dump when trying to get the Financial Statements.
The error in the dump is u201CAn internal table field has been defined too smallu201D.
The field with the problem is u201CYou should define the field "HSL03" larger in program "SAPLFAGL_GLT0".The maximum size allowed for fields of type P is 16 (31 digits).
Itu2019s caused by a list of documents where the exchange rate must to be u201D/699,94001u201D but it was entered without the forward slash and it caused very big numbers
The biggest number in one document is 99,401,074,527.31 USD
The sum of all them is 13,008,701,915,208.50
Any ideas to fix this?
Thanks in advance
Jorgehave you reversed those documents with fb08 and post it with the correct exchange rate???
have you searched in SMP for similar problems - I think you've to correct the DB-values- but only in agreement with your audit firm / revision
A.
Edited by: Andreas Mann on Apr 6, 2010 3:13 PM
Edited by: Andreas Mann on Apr 6, 2010 3:16 PM -
Filtering internal table using select-option values
Hi,
I got an internal table with select-option values. for eg. it_perno with the values I BT 000160 000170.
Now i got another second internal table which is have the person number. Now i need to filter this second internal table based on the values from the select option table. my question is
i can collect all the values from 160 to 170 in a separate table by looping over the select option table. and then based on the values filter the second internal table person number.
But what would be the case if the select option contains both intervals and multiple options. For eg.
I BT 000160 000170.
I EQ 000185.
So can you suggest any good solution, that based on this select option table i need to filter the second internal table Person number.
Thanks in advance.
Regards,
anbu.Hi,
Can you not use the select-options in the Select query while populating the internal table.
SELECT pernr FROM pa0000 INTO it_tab WHERE pernr IN s_pernr.
If you cannot do this and you do not want to delete the unwanted entries, then you can use the WHERE clause in the LOOP statement to process the specific entries required:
LOOP AT it_tab INTO wa_tab WHERE pernr IN s_pernr.
Regards,
Aparna Alashe. -
Header to internal table fields
Hi All,
How can I add header description to the internal table fields and download this internal table to desktop as EXCEL form.
I want to show heading in the first line of the excel and then 2 - 3 blank lines and then next line should be populated with DATE and Exec. Time, then 2-3 blank lines , then the data with the header description to be displayed.
My sample internal table data is as below,
John M 12 2344
Thomas M 17 8960
Lin F 10 8467
Jan M 12 4323
I need to add, description as NAME above John, Thomas, Lin etc.
as GENDER above M,M,F etc.
as CODE above 12, 17,10 etc. and
as EXTENTION above 2344, 8960,8467 etc
final execl sheet should be as below,
COMPANY DATA
DATE 28 - 08 - 2009 TIME 12:32
NAME GENDER CODE EXTENTION
John M 12 2344
Thomas M 17 8960
Lin F 10 8467
Jan M 12 4323
Please let me know, how to do this.
Thanks in advance ,
SabuHi,
Kindly go through this sample code below:
"Create T_Head internal table with the required structure for the header
*func mod to download header and contents to the given path
call function 'GUI_DOWNLOAD'
exporting
write_field_separator = 'X'
filename = v_pathname "path entered by the user
tables
data_tab = t_head. "Header Internal table
refresh t_head.
clear t_head.
call function 'GUI_DOWNLOAD'
exporting
* BIN_FILESIZE =
filename = v_pathname
filetype = 'ASC'
append = 'X' "Here by giving 'X', header will be appended in the download int table
write_field_separator = 'X'
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
tables
data_tab = itab
* FIELDNAMES =
exceptions
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
others = 22
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endif.
Hope it helps
Regards
Mansi -
Mass changes of Material Master field with different values
Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu KumarHi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul. -
Accessing Dynamic Internal table fields
Hello All,
I have one internal table ep_tabx having 138 columns whose data is getting displayed
by using function module reuse_alv_grid_display.
Now my query is, i have created one custom button on the appl toolbar to download ep_tabx data.
IF the user changes the the layout of the output at runtime and then presses that custom button
then i have created one dynamic internal table using call method cl_alv_table_create=>create_dynamic_table suppose <dyn_table> whose struc will be that of
dynamic fieldcatalog returned by using FM REUSE_ALV_GRID_LAYOUT_INFO_GET.
And then I have put a loop on the int table ep_tabx and move corresponding to the int table
<dyn_table>. But when i download the <dyn_table> data through GUI_DOWNLOAD the
date fields data is not getting downloaded correctly. I have 4 date fields in my ep_tabx.
In the alv grid output the date is getting displayed like 08/30/2004(ie mon/date/yr) but in download
file it comes like 20040830(ie yr/mon/date and that too without /).How to access the dynamic
internal tables fields separately so asto convert them in the pgm before the download.
Kindly Help.
Thanks in advance.
MansiHi,
Search in SDN you would get loads of info on accessing dynamic itab's .
in order to convert your date format use WRITE stmt to convert the value in your itab before passing it to download FM.
Regards,
Raghavendra
Maybe you are looking for
-
After answering the three security questions to update an app on itunes connect the submit button is grayed out. It looks like an error on the website. Has anyone ran into this problem before? Any help would be greatly appreciated.
-
Can anyone make any sense of these java errors?
HI, Hoping someone with some OSX/java knowledge can help me shed some light on these errors I'm receiving when publishing to ios... Exception in thread "main" java.lang.AbstractMethodError: org.apache.xerces.dom.DeferredElementImpl.getTextContent()Lj
-
After updates the server will not restart
I upgraded from Snow Lepord to Lion to Lion Server. Everything was working ok until I just applied the apple updates and rebooted. Now the server just stops at the startup page with the circle spinning. Hardware is a 2009 Mac Pro tower.
-
Hi, Can anybody help me to get more documents about Web Desgin API other then the SAP help document ? Regards,
-
[iOS5] Safari crashing at iPad 2
Hi everybody, safari crashed very often at my iPad 2 since I updated it from iOS4 to iOS5. There are no warnings, nothing. This happened at the Safari Browser and all other browser that use the engine from the safari browser (Atomic Web Browser,...).