Populating Text Field using Dynamic Actions is not working

I've a Select List (P14_ACCOUNT) and Text Field (P14_BILLING_ADDRESS_1) on a form. On selecting a value on the Select List, I've to populate the Text Fields by fetching its values from the database by using the Select List value as the primary key. To do this, I created a Dynamic Actions (Advanced) on the Select List, with event onchange and Set Value as SQL. However this is not working.
Below are the sqls of Select List and Dynamic Action respectively:
select ACCOUNT_NO || ' - ' || COMPANY_NAME display_value, ACCOUNT_ID return_value
from ACCOUNT
order by 1
select a.address1 from account a where a.account_id = :P14_ACCOUNTNow when I substitute the Dynamic Action sql with any of the below sqls, the value shows up:
select address1 from account where account_id = 41
select address1 from account where rownum=1
select user from dualI thought of seeing the value of :P14_ACCOUNT in session or debug, but session does not show any value and on clicking debug it throws a popup message "Debugging is not enabled for this application."
I've been trying since few hours but with no luck. How can I debug further?
Thanks for the help.
--Hozy

Hozy,
Take alook at your application on apex.oracle.com
The session state for items, when SQL is used, is set using the Page Items to Submit parameter as has been set in your application.
Regards,

Similar Messages

Cursor won't show in text fields, Google Street View mouseup not working

My wife and I have nearly identical computers and update Firefox whenever a new version comes out.
Lately, only on her computer, when she clicks into the address bar or into a text field, the cursor sometimes does not appear. In some other text fields it does appear. In the address bar, whenever you click in it and then type, there is no cursor, and the entire address bar is always overwritten.
In Google Street View (I think it uses the Flash player), she can start dragging, but then the mouse "won't let go" - it is as if the mouse up command is ignored. I have to drag the mouse outside the picture area and then back in, or the dragging will continue.

Please see possible relations to [https://bugzilla.mozilla.org/show_bug.cgi?id=718939 Bug: 718939]
To test that this Bug report is related to your problem:
#Find a webpage with an embedded Java applet such as [[http://chir.ag/stuff/sand/]]
#Click into the Java applet
# Then try to click the address bar, or search bar.
**If Text Fields become unresponsive, click your Windows Taskbar, then click the address bar/search bar
Within the comments of the bug report will find a link to a Patched version of Firefox 10
* [http://ftp://ftp.mozilla.org/pub/firefox/try-builds/[email protected]/try-win32/firefox-10.0.en-US.win32.installer.exe Patched Version] (located in comment 40)
**Note that this is not an Office Release.
Unaware of when an Official Fix will be released

Populating text fields from dynamic select

I have been searching the net for a javascript/ajax solution
that will populate a number of text fields based on the selection
from a dynamic select field. Specifically, when the person selects
a company name, the companies address and phone number gets pulled
from a second recordset that gets filtered by the choice from the
dropdown. This needs to be done without postback.
The page is built using php/mysql and the select is populated
by one of the recordsets.
Any direct help or steering to a solution would be
appreciated.

Thanks for the reply.
Right now I'm starting with a blank form and once I get my head wrapped around this then I was going to modify what is already in use.
I'm attaching my scheme and xml file.
Thanks!
Derrick
I get an error when trying to upload my schema. I am pasting the content of the file here. I call it proofout.xsd
<?xml version="1.0" encoding="utf-8"?>
<xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="userList" type="UserList" />
<xs:complexType name="User">
<xs:sequence>
   <xs:element name="csrName" type="xs:string" />
   <xs:element name="csrExt" type="xs:int" />
   <xs:element name="csrFax" type="xs:string" />
   </xs:sequence>
   </xs:complexType>
   <xs:complexType name="UserList">
   <xs:sequence maxOccurs="unbounded">
    <xs:element name="user" type="User" />
    </xs:sequence>
    </xs:complexType>
    </xs:schema>

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to make a default value by using dynamic actions

Hi,
       I want to default a field nationality in infotype 0002 as a great britan, using dynamic actions but unable to go ahead. Any help regarding this really appreciate.
Regards
Niranjan

Hi,
I need some guidance around creating dynamic action with default value, Please guide me through.
I am aware I can set default values for new infotype, but I need to set default value for same infotype, let me explain the scenario.
Currently employee is on one pension scheme which is called NE1 and now we are moving this employee to CRESP Pension Scheme.
When employee is in NE1, his IT0071 has got a opt in field with a flag on, when the same employee is moved from NE1 pension scheme to CRESP Pension scheme, his new IT0071 record should have the same opt in field with a flag on, I want it to set this flag automatically using dynamic action. I dont want to update this field manually, while moving from NE1 to CRESP.
Currently the below dynamic action is coded when employees are being moved form NE1 to CRESP, but now they will have a opt in flag which should appear automatically, What needs to be done to make this happen?
Please let me know if I set default value for the Opt in field for the same infotype.
. When employees are being moved from NE1 to CRESP pension scheme we currently use a dynamic action as show below:
0071                      04      10      I        INS,0069
0071                      04      20      W       P0069-BEGDA=P0071-BEGDA
0071                      04      30      W       P0069-ENDDA=P0071-ENDDA
0071                      06      1        F        DYNACT_PAE031(ZHRPROG016)
Also if it is not possible via dynamic action could you please explain how to create it using user exit, I am not an ABAPer.
Your help is very much appreciated.
Kind Regards,
SK

About creating an AJAX page with DML procedures using dynamic actions

About creating an AJAX page with DML procedures in APEX using dynamic actions. Help with limitations.
I want to share my experience, creating AJAX procedures in APEX 4.0.
LIMITATIONS
•     How Can I Hide UPDATE button while I press NEW button. ??
•     How Can I Hide CREATE button while I’m UPDATING A RECORD. ??
•     How can I avoid multiple Inserts or Updates. ??
Here are the steps to create an AJAX Updatable Form using the sample table DEPTS. You can see the demo here: [http://apex.oracle.com/pls/apex/f?p=15488:1]
1)     Create a blank page
2)     Add a Report Region for departments (It shows the columns deptno, dname and loc).
3)     Add an HTML Region and create the elements to edit a Department.
a.     P1_DEPTNO (Hidden to store PK)
b.     P1_DNAME (Text Field)
c.     P1_LOC (Text Field)
4)     You also have to create a hidden element called P1_ACTION. This will help to trigger dynamic actions to perform DMLs.
5)     Open Page Attributes and in the HTML Header Section include the following code.
<script>
     function doSelect(pId){
          $x_Value(‘P1_DEPTNO’,pId);
          $x_Value(‘P1_ACTION’,’SELECT’);
</script>
6)     Modify the column DEPTNO in the report, to add column link. In the link text you can use #DEPTNO# , in target you must select ‘URL ‘ and in the URL field write javascript:doSelect(#DEPTNO#);
7)     Create the following Buttons in the Form Region.
CANCEL     Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’CANCEL’);
NEW          Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’NEW’);
SAVE          Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’UPDATE’);
CREATE          Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’CREATE’);
8)     Create the following Dynamic Action to Select a Department
Name:     Select Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     SELECT
Action:     Execute PL/SQL Code
PL/SQL Code:
SELECT dname, loc
INTO :P1_DNAME, :P1_LOC
FROM dept
WHERE deptno = :P1_DEPTNO;
Page Items to Submit:     P1_DEPTNO, P1_DNAME, P1_LOC
Don’t include any false action and create the Dynamic Action.
The first limitation, the value of page elements don’t do refresh so I added the following true actions to the dynamic action AFTER Execute PL/SQL Code.
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_DNAME
Page Items to submit:     (none) (leave it blank)
Affected Elements: Item P1_DNAME
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_LOC
Page Items to submit:     (none) (leave it blank)
Affected Elements: Item P1_LOC
These actions allow refresh the items display value.
9)     Create the following Dynamic Action to Update a Department
Name:     Update Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     CREATE
Action:     Execute PL/SQL Code
PL/SQL Code:
UPDATE dept SET
dname = :P1_DNAME,
loc = :P1_LOC
WHERE deptno = :P1_DEPTNO;
Page Items to Submit:     P1_DEPTNO, P1_DNAME, P1_LOC
Don’t include any false action and create the Dynamic Action.
Include the following True Actions BEFORE the Execute PL/SQL Code true Action.
Action:     Set Value
Unmark ‘Fire on page load’ and ‘Stop execution on error’
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_DNAME
Page Items to submit:     P1_DNAME
Affected Elements: Item P1_DNAME
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_LOC
Page Items to submit:     P1_LOC
Affected Elements: Item P1_LOC
These actions allow refresh the items display value.
Finally to refresh the Departments report, add the following true action at the end
Action:     Refresh
Affected Elements: Region Departments
10)     Create the following Dynamic Action to Create a Department
Name:     Create Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     CREATE
Action:     Execute PL/SQL Code
PL/SQL Code:
INSERT INTO dept(deptno,dname,loc)
VALUES (:P1_DEPTNO,:P1_DNAME,:P1_LOC);
Page Items to Submit:     P1_DEPTNO, P1_DNAME, P1_LOC
Don’t include any false action and create the Dynamic Action.
Include the following True Actions BEFORE the Execute PL/SQL Code true Action.
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Function Body
PL/SQL Function Body:
DECLARE
v_pk NUMBER;
BEGIN
SELECT DEPT_SEQ.nextval INTO v_pk FROM DUAL;; -- or any other existing sequence
RETURN v_pk;
END;
Page Items to submit:     P1_DEPTNO
Affected Elements: Item P1_DEPTNO
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_DNAME
Page Items to submit:     P1_DNAME
Affected Elements: Item P1_DNAME
Action:     Set Value
Unmark ‘Fire on page load’ and ‘Stop execution on error’
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_LOC
Page Items to submit:     P1_LOC
Affected Elements: Item P1_LOC
These actions allow refresh the items display value.
Finally to refresh the Departments report, add the following true action at the end
Action:     Refresh
Affected Elements: Region Departments
11)     Create the following Dynamic Action to delete a department
Name:     Delete Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     DELETE
Action:     Execute PL/SQL Code
PL/SQL Code:
DELETE dept
WHERE deptno = :P1_DEPTNO;
Page Items to Submit:     P1_DEPTNO
Don’t include any false action and create the Dynamic Action.
Include the following True Actions AFTER the Execute PL/SQL Code true Action.
Action:     Refresh
Affected Elements: Region Departments
Action:     Clear
Unmark ‘Fire on page load’
Affected Elements: Items P1_DEPTNO, P1_DNAME, P1_LOC
12)     Finally Create the following Dynamic Action for the NEW event
Name:     New Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     NEW
Action:     Clear
Unmark *‘Fire on page load’*
Affected Elements: Items P1_DEPTNO, P1_DNAME, P1_LOC

I need some help to solve this issues
•     How Can I Hide UPDATE button while I press NEW button. ??
•     How Can I Hide CREATE button while I’m UPDATING A RECORD. ??
•     How can I avoid multiple Inserts or Updates. ??

Is it possible to change LOV definition using dynamic action?

Hi,
I have a multi-select LOV page item, P27_MULTI_CLASS_CODE, defined as below. On page load, this list only contains values based on what has been passed to P27_OLO_CODE or P27_OLO_CODE_SW.
SELECT DISTINCT c.class_code d, c.class_code r
FROM ORGANIZATION o,
       POSITION p,
       CLASS c
WHERE o.org_wk = p.org_wk
   AND p.class_wk = c.class_wk
   AND o.org_active_flag = 'Y'
   AND p.pos_active_flag = 'Y'
   AND c.class_active_flag = 'Y'
   AND (o.olo_code = :P27_OLO_CODE
        OR o.olo_code = :P27_OLO_CODE_SW)
ORDER BY c.class_code ASC
Before submitting the page, I would like the LOV definition of P27_MULTI_CLASS_CODE to change to the following (similar query without reference to P27_OLO_CODE or P27_OLO_CODE_SW) based on whether the user selects checkbox item, P27_ALLOW_SW.   By doing this, P27_MULTI_CLASS_CODE would contain a full range of values rather than limited values.
SELECT DISTINCT c.class_code d, c.class_code r
FROM ORGANIZATION o,
       POSITION p,
       CLASS c
WHERE o.org_wk = p.org_wk
   AND p.class_wk = c.class_wk
   AND o.org_active_flag = 'Y'
   AND p.pos_active_flag = 'Y'
   AND c.class_active_flag = 'Y'
ORDER BY c.class_code ASC
I wanted to avoid writing Javascript. Is this possible using dynamic actions...or at least somehow refresh P27_MULTI_CLASS_CODE so that it ignores P27_OLO_CODE and P27_OLO_CODE_SW?
I've tried creating a dynamic action to clear the value of P27_OLO_CODE or P27_OLO_CODE_SW, in hope it would trigger P27_MULTI_CLASS_CODE to display all values, but it has not been successful. Any ideas?
APEX 4.2

I was able to resolve by changing the SQL statement to P27_MULTI_CLASS_CODE. Note: I also included an additional condition.
SELECT DISTINCT c.class_code d, c.class_code r
FROM ORGANIZATION o,
       POSITION p,
       CLASS c
WHERE o.org_wk = p.org_wk
   AND p.class_wk = c.class_wk
   AND o.org_active_flag = 'Y'
   AND p.pos_active_flag = 'Y'
   AND c.class_active_flag = 'Y'
   AND (:P27_ALLOW_SW = 'Y'
        OR (o.olo_code = :P27_OLO_CODE
            OR o.olo_code = :P27_OLO_CODE_SW)
   AND (:P27_PAY_PLAN IS NULL
         OR p.pay_plan = :P27_PAY_PLAN)
ORDER BY c.class_code ASC
I also changed the Cascading LOV Parent Item(s) value to: P27_OLO_CODE,P27_OLO_CODE_SW,P27_PAY_PLAN,P27_ALLOW_SW. Optimize Refresh = No, since a change in any one of these values should trigger refresh of LOV.
The Dynamic Action was also modified to NULL out P27_OLO_CODE,P27_OLO_CODE_SW when P27_ALLOW_SW was enabled.
So far, so good! Thanks for your suggestions Tom and Howard!

How to use dynamic action to fill multi item on a page ?

Hi..
I want to fill multi items on a page so I build a dynamic action ( Execute PL/SQL Code ) to do it .The problem is that when the page loads I can't see any data and I tried to see the session values using debug and I found data. Moreover when I save the row I got these data saved.
So what is the magic there?
Thanks

Firstly, to get the multi-select populated with "pre-selected" values the easiest approach is to use Computation or Process at a process point On Load Before Header or After Header or Before Regions.
All you need to do is populate your "Select List " page Item with : (colon) separated list of selected values. E.g is you want A,B and C out of A,B,C,D,E selected then get A:B:C into the Page Item.
If you have used Dynamic Actions, what is your event on which the action fires? For Dynamic-Actions the page (HTML DOM) needs to be existing , so it must fire after the page has loaded.
Regards,

Why we are using dynamic actions in HR

why we are using dynamic actions in HR?? main purpose of it>>

Check the link -
Re: Dynamic Actions
Re: dynamic actions
Re: Dynamic Actions
www.hrexpertonline.com/downloads/Rehan%20Zaidi%20Online%20Portion.doc
Regards,
Amit
Reward all helpful replies.

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

Sending mail of infotype record using dynamic actions

Hi
How can we send mail of info type record using dynamic actions if possible give me one example
Mail to me: [email protected]
Thanks & Regards
santhosh reddy

Hi..
Already Standard Entries exists for the same.. pls check T588Z

Sending mails using dynamic actions

Hi
How we can send mails using dynamic actions.
Regards
Santhosh

Hi,
Sending mails is possible by using the feature M0001. This is to be coded in the dynamic action depending on the requirement with function code "M".
Hope this would help you to explore further. Incase of any specific query you can post back.
Regards
Tharak

Send mail using Dynamic actions

Hello experts,
How to send a mail using Dynamic Actions??
Requirement : Lets say one employee is hired on 26th Aug, so after 10 days he will be confirmed. so on 8th day need to send a mail to concerned person reminding the confirmation date.
so how do i do that using dynamic actions??
Thanks in advance.
Saurabh

Hi,
In dynamic actions there is an option for calling sub-routine from any program or subroutine pool. So u can make subroutine for sending mail according to ur requirement. An call on th same from dynamic actions.
if u want sample code for this, pls let me know.
<removed_by_moderator>
Regards,
Ranjith
Edited by: Julius Bussche on Aug 26, 2008 3:25 PM

SSRS - Action: MailTo not working in Excel Export

Hello:
In my reports, I have a link that enables users to send me an email if they want to provide feedback. This is done by using a "mailto:" expression in Action.
If the user clicks on the link in IE, the link functions correctly and Outlook will open up with my email address, the Subject I've specified, etc.
However, if the user exports the report to Excel and then clicks on thel link, a "Reference is not valid" error message gets thrown. This is because the link automatically have
file:///tempFileLocation/fileName - appended to the beginning of the link. Therefore it becomes something like "file:///tempFileLocation/fileName - mailto:emailAddress?subject=subjectName"
etc.
Why is the file location automatically appended to the beginning when the url is "mailto:"? The other links will export and function correctly when exported to Excel. However, any link with "mailto:" Action
will not work when the report is exported to Excel. What is the fix for this?
Thank you in advance!

Hi yosedesh,
According to your description, you create an action to open Outlook email. The action works fine in IE, but after exporting the report to an Excel file, the action can’t work correctly.
In Reporting Services, when we create an expression and concatenate the ‘MailTo:’ to the beginning of the field for the “Go to URL” option, the hyperlink will be changed after Excel render automatically. The hyperlink will add the name of exported Excel
file at the beginning of the hyperlink like you mentioned. This is a by-design behavior. So in your scenario, if you want users to open outlook email via the hyperlink, you have to modify the hyperlink within the Excel file manually.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Command.text with ODBC escape sequence is not working in VC++, Bug in OLEDB ?

Command.text with ODBC escape sequence is not working in VC++. The Code, which written in VB is working perfectly. Is there any different syntax in VC++ or bug in
OLE DB provider ?. I am using OraOLEDB 8.1.7 version.
Thanks
Mani
VB Code
' Enable PLSQLRSet property
Cmd.Properties("PLSQLRSet") = True
' Stored Procedures returning resultsets must be called using the
' ODBC escape sequence for calling stored procedures.
Cmd.CommandText = "{CALL corpuser.GetCorpUserRec(?, ?)}"
Set Rst1 = Cmd.Execute
VC++ Code (while execute it is giving error )
pCommand->CommandText = "{CALL corpuser.GetCorpUserRec(?, ?)}";
pRs1 = pCommand->Execute(NULL,NULL,adCmdStoredProc);

Hi
The odbc escape sequence for calling stored procedures works fine with VC++ also.
You can check the sampe application at following url :
http://otn.oracle.com/sample_code/tech/windows/ole_db/content.html
Hope this helps
Chandar

Populating Text Field using Dynamic Actions is not working

Similar Messages

Maybe you are looking for