Populating text in RFQ header

Hi all,
I have the below the requirement.
Whenever RFQ is created (manually, referring PR thru ME57, or referring contract) some
text need to be populated in 'Header text' of RFQ Header.
How to achieve the requirement? Are there any user exit which could fulfill
this requirement.
Please give your inputs.
Regards,
Partha

Hi,
Can you please explain in detail?
My requirement is that the text need to be populated automatically
whenever RFQ is created.No User intervention on this.
Partha

Similar Messages

Copy the PR header Text to RFQ header Text while Creating W.R.T

Dear Guru's
While Creating with reference I want to Copy the PR Header text into RFQ Header Text..
Please do the needfulll
Thanks in Advance.
GSANA

Dear You can not copy the header text of PR to RFQ in the standard SAp, as PR is internal document and RFQ is external. but if you even want to do it then contact your ABAP team.
regards,
qsm sap

PR HEADER NOTE TEXT TO RFQ HEADER NOTE TEXT

Hello all
We are maintaining the PR Header Note & we are creating the RFQ with reference to the PR , we are maintaing the PR Header note , but it is not getting copy in RFQ Header note
Kindly suggest
Thanks in advance
Regards,
Rajesh

hello
Thanks for reply
After selecting the Header note in RFQ under Copying rules for header text & Selecting the Header note only text linkage is allow is RFQ
whether i have to make new entry as PR
No entry of PR availbale in for selection
Please suggest
regards
Rajesh Dalal

RFQ header text in Sapscripts

I have copied MEDRUCK sapscripts to ZMEDRUCK and I have a requirement to print some rfq header text. I have got the Text ID (A01), Text name (600000022), Text Object (EKKO).
What is the syntax to print this header text using a INCLUDE statement ? I have to print the heading and the contents of this text object. Can I get some examples ?
Also, the heading should not print if the text is blank.
Thanks.
Edited by: NewComer on Dec 27, 2007 6:06 PM

Check these threads. U have sample code.
Display long text in SAPScript
Text printing in SapScript
Regards,
Maha

Warehouse instruction text. in PO header

Hi,
Following is the requirment,
we are looking for a possibility to store a permanent information in the warehouse instruction text.
Where can I maintain this?
This is in Purchase Order on header, Text Tab.
Regards,
Ajinkya

warehouse instruction text is probably an own defined PO header text in your system, as the PO goes usually to your vendor and not to your own warehouse.
How is this text defined with copy rules? From where does it get the text, probably not from material master, as this would be item level text. usually a header text is copied from vendor master, contract or RFQ or or copied from existing old PO or entered manually in each PO.
You can maintain general text in SO10, and can then include this text manually in the PO.
or you take this text with help of the Business Add-In (BAdI) ME_PROCESS_PO_CUST , which enables you to extend the business logic of the Enjoy purchase order on an individual basis.
Use the method Process_HEADER

Text in PO(text tab in header & item) is not shown in the Print Preview

Hi Guys,
 I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item) is not shown in the Print Preview.
 Can you guys help.Do I need to write a subroutine pool for this.
 <<text removed by moderator>>
Regards,
Rajiv
Edited by: Matt on Nov 12, 2008 1:20 PM

Hi ,
Use bapi bapi_po_getdetail .
CALL FUNCTION 'BAPI_PO_GETDETAIL'
 EXPORTING
 purchaseorder = is_ekko-ebeln
 item_texts = c_x
 header_texts = c_x
 TABLES
 po_header_texts = it_header_text
 po_item_texts = it_item_text.
Regards
Neetesh

How to add an image or static text in the header of EACH page of a cross-Tab report

Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.

Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald

Need help in populating Text ID using IDOC ORDERS05

I have following scenario.
PO is being send from ECC to EDI partner.
and we received the PO feedback from the EDI partner
For PO feed back, we are using ORDERS05 idoc type and ORDRSP message type.
Custom Text Id(F01) has been added to the Text tab of the header section of the Purchase order screen (ME23N).
Custom Text id (F02) has been added to the Text tab of the Item section of the purchase order screen.
(Text ID F01 and F02 are in object EKKO - checked in transaction se75)
Now, I m posting idoc with the following value but Text field (in header and item level) is not updating while displaying PO.
Header - E1EDKT1
     TDID -   F01
     TSSPRAS- E
                     TDOBJECT - EKKO
              E1EDKT2
     TDLINE   - "My Header Text"
Item Level - E1EDKT1
     TDID -   F02
     TSSPRAS- E
                     TDOBJECT - EKKO
              E1EDKT2
     TDLINE   - "My Item level Text"
Can we update the Text Id in PO using IDOC ORDRSP.ORDERS05? I have tried but it is not updating
Any suggestion.
Edited by: Chetankumar Patel on Mar 14, 2011 10:17 PM

Have you tried with updating other Long texts ? While going through the code of inbound function module IDOC_INPUT_ORDRSP, it is mentioned that only limited fields are available for updation. See remarks in line no : 88 of include LEINMF2O.
read document and prepare for update P.O. Item fields
* possible Update fields of EKPO: LABNR, IDNLF, NETPR

Vertical text in table heading

Hi,
I would like to save some space in some reports and I would like to change orientation of text in table heading.
Is it posible to have vertical text in table heading?
What I want is showed on this picture: [Vertical text|¨http://img179.imageshack.us/img179/234/obiverticaltext.jpg]
Thank you for some tips.

Hi,
Go through this...will help you solve your requirement....http://blog.trivadis.com/blogs/andreasnobbmann/archive/2009/07/17/vertical-text-in-obiee.aspx
Use the same code Writing-mode: tb-rl; filter: flipv fliph; in custom css style of column heading.(column properties->column format->edit format icon beside column heading->css style)
Regards,
Srikanth

How to get vendor text in PO header?

The requirement is to put vendor text in vendor master (XK03) and in Purchasing screen -> extras->text.
We have a Purchasing Memo as well as a "Purchase Order Text" which i fill up. I require that the "Purchase order text" field value from vendor master should show in the PO header text. But it is not appearing currently.
What could be the issue and how can i activate this?

Hi,
Make sure you have maintained the text rules in config.
IMG>MM>Purchasing>PO>Texts-->Copying rules for header texts
Maintain text linkages for header text (or whichever text value you want) with source object being vendor master and source "text purchase order text/memo".
Thanks.

Can the text in the header row be slanted?

In Excel the text in the header row can be slanted at an angle in order to show a long header text in a narrow column. Can this be done in Numbers?

John,
Numbers doesn't support this directly. A quick way to fake it is to make a chart with slanted category axis labels. This won't give you slanted cell borders, but then you didn't ask for that.
These particular instructions have an advantage over just pasting text boxes over the cells in that the same text is in the cell as in the label pasted over the cell. This may be helpful if you want to reference a header cell's content in an expression.
Jerry

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. How can this be done?

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. Can this be done?

See this thread: https://discussions.apple.com/thread/3728197?start=0&tstart=0

How to activate Long Text of Order Header in IW31/32

Hi Expert,
I have one reqm. like want to upload Long Text in Order Header.
I have used FM 'Create_Text', its working f9 i.e. creating Long Text for Order Header but not displaying it
in IW32/33 transaction. Entry for Long Text is available in Table STXL and STXH.
Please advice me how to activate that Header Long Text which I uploaded earlier.
Thanks,
Jay.

Hi Madhukar,
Yes I am passing everything correctly, as I am getting Long Text record created in Table STXL & STXH, but not able to see in IW32/33 at the header long text.
So this is my doubt like how 2 update or activate long text of Order Header?
Thanks,
Jay.

Itallic Text in Table header

Hello All,
We are using the TableView Control in one of our aplications to display search results.When we built this particular application we were on EP6 SP2 PL 29.
Some how in that version teh header text in the tabledataview control was displaying italic text.
We used the following piece of code do this.
bean.setSearchHeader("Search Result(s) For: "+ bean.getSearchString()+ " ("+ mySearch.getTrueResults()+ ")");"
This would display the keyword we searched for in Italic.
Now we have migrated from EP6 SP2 to EP6 SP16.
The correct portal version is:
J2EE Engine 6.40 PatchLevel 102141.313
Portal 6.0.16.0.0
KnowledgeManagementCollaboration 6.0.16.3.0 (NW04 SPS16 Patch3)
Now in this particular version when we search for any keywords.
The results are displayed but the header data does not show the keyword in Italics, however it displayes the "" tag.
Let me know whether we can display italic text in table Header.
Thanks and Regards
Manoj Kumar
Message was edited by: Manoj Kumar

Hi,
to customize the header of the TableView change the header renderer.
1. implement IHeaderRenderer interface:
public class HeaderRenderer implements IHeaderRenderer {
public void renderHeader(TableView tableView, IPageContext pcontext) {
TextView tv = new TextView();
tv.setEncode(false);
tv.setText("italic header text");
tv.render(pcontext);
public boolean willRenderHeader(TableView tableView, IPageContext pcontext) {
//allways render
return true;
2. set the header renderer class to your TableView object:
tableView.setHeaderRenderer(new HeaderRenderer());
this should show the text in the table header in italics.
Romano

IW32: Error getting message (Text for order header not maintain in lang.EN

Hello All,
We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
We have not done any configuration change in this particular system.
Can anyone help to resolve this.
Thanks

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

Populating text in RFQ header

Similar Messages

Maybe you are looking for