Text in PO(text tab in header & item) is not shown in the Print Preview

Hi Guys,
            I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item) is not shown in the Print Preview.
            Can you guys help.Do I need to write a subroutine pool for this.
            <<text removed by moderator>>
Regards,
Rajiv
Edited by: Matt on Nov 12, 2008 1:20 PM

Hi ,
Use bapi bapi_po_getdetail .
CALL FUNCTION 'BAPI_PO_GETDETAIL'
    EXPORTING
      purchaseorder   = is_ekko-ebeln
      item_texts      = c_x
      header_texts    = c_x
    TABLES
      po_header_texts = it_header_text
      po_item_texts   = it_item_text.
Regards
Neetesh

Similar Messages

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Reporting tab is not shown in the console

hi everyone
the reporting tab is not shown in the service manager console, the topology i am using is 2 servers [one for DW and the other for management server] both servers have their SQL server installed on each one, could you please tell me how i can start to get
this working or the steps i have to follow ?? isn't supposed to be working out of the box ? i have checked reporting services and they are running

Probably your report server is not pointing to the DWDATAMART database, try login to:
http://YourDWDatabase/Reports/Pages/Folder.aspx?ItemPath=%2fSystemCenter%2fServiceManager&ViewMode=List
click on DWDATAMART Connection, under connection string, do you see your DWDATAMART DB name and server name?
Antoine AL Ibry

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Some items were not copied to the iphone because they cannot be played on this iPhone

Hi Team,
I am using IPhone 2G Model: A1203. While iam transfering Videos(mp4 format) from itunes to iphone it shows this Error "Some items were not copied to the iphone because they cannot be played on this iPhone". Itunes is 11 version Please help me to get rid of this error.
Thanks in Advance

Hey Ratnakar Reddy,
Thanks for the question. I understand that you are experiencing issues syncing your iPhone with iTunes. The following resource outlines the exact error message you are receiving:
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Thanks,
Matt M.

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

Depreciation value not shown under the tab 'posted value' in AW01N

Dear experts
I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
Could someone comment how to control deprecation value shown or not on the second tab by local book?
Best Regards,
Nicole

Hi,
If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
As you have put "area doesnot post" for the local book, it will not show the balance.
Thanks,
sravankumar

In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Item category not available in the table T184

Hi Gurus,
When the PP consultant is trying to Create Individual Items using MD81, it is giving the error " Item category not available in the table T184" But from the SD side, I have assigned the item category to the sales document type. also the field for item category ( PSTYV ) is present in the table T184. What can be the problem? is this any issue related to SD?
Thanks & Regards
Kaushik Ghosh

Check the material master for the material for which you are trying to create the Independent Requirements. The Item Category group mentioned should be be wrong there, as by message i am understanding that system is not able to determine the Item Category for your concerned material.
Item category determination is done in T184 table with the combination Sales Document Type/Item Category group/Item Usage/Item Category of Higher level item/ Default Item Category.
Hope this helps.
Regards,
Vivek Sahni

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

cor-el
Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
bossman344

"EA02 The item is not found in the container portion of the"

GW2012 (on the OES2).
One of users can't open the accepted letter in gwwebaccess.
In attempt to open the received letter receives a mistake:
[EA02] The item is not found in the container portion of the uid.
Additional information:
1) the "mailbox" folder empty, at work in gwwebaccess.
But if to work in WIndows GW Clients - in the "Mailbox" folder the received letters are visible and accesible.
2) In the gwwebaccess visible recieved mail in the "Unopened Items" folder ! . But when open mail from this folder - have error:
[EA02] The item is not found in the container portion of the uid.
All this only for the user: amuzchil.
Before upgrade from GW8 -> gw2012 all was ok for amuzchil.
Repair, Rebuild, Recreate mailbox "amuzchil" - don`t help. ;(
Please, help me.
Serg

Originally Posted by Michael Bell
On 5/14/2012 11:16 AM, skoltogyan wrote:
>
> GW2012 (on the OES2).
>
> One of users can't open the accepted letter in gwwebaccess.
> In attempt to open the received letter receives a mistake:
> [EA02] The item is not found in the container portion of the uid.
>
> Additional information:
> 1) the "mailbox" folder empty, at work in gwwebaccess.
> But if to work in WIndows GW Clients - in the "Mailbox" folder the
> received letters are visible and accesible.
> 2) In the gwwebaccess visible recieved mail in the "Unopened Items"
> folder ! . But when open mail from this folder - have error:
> [EA02] The item is not found in the container portion of the uid.
>
> All this only for the user: amuzchil.
>
> Before upgrade from GW8 -> gw2012 all was ok for amuzchil.
>
> Repair, Rebuild, Recreate mailbox "amuzchil" - don`t help. ;(
>
>
> Please, help me.
>
> Serg
>
>
That's going to be a soap item corruption issue. You're going to have to
open an SR. Turn on SOAP tracing at the poa and try to trace the issue.
Problem Resolved.
The user created the additional folder: "mailbox" under "Cabinet"-folder.
After removal of this folder everything began to work.
Serg

Material item text not appearing in PO Print Preview

Hi experts,
We have created a new PO type . We have assigned it with PO text via Spro>Purchasing>Purchase Order > Message > Text for messages > define text for purchase order
Maintained text for document header
Maintained text for document item
But still in Purchase Order , the material PO text at item level , is not appearing at the time of print preview / print out.
Please suggest .
Regards,
( Rajneesh Gulati )

If I understand correctly, you want to copy the purchase order text from the material master directly into the PO's for this material.
I got the same problem; text appears in PO item text, but doesn't appear on print preview.
=> check your forms first
=> if you can't find an error here, check the copying control in
SPRO -> Materials Management -> Purchasing -> Purchase Order -> Texts for purchase orders -> Define copying rules for item texts
go to the text linkages of the text type that you want to see appearing
=> make sure that the entries with source object 'material master' have the Fix value (blank) rather than N or * (if you see the text appearing in the PO but not on the print out, this means that this setting is currently set on *)
Hope this helps

Item text is not appearing in the print output through IDOC?

Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
    idoc_data-segnam = 'E1BPMEPOTEXT'.
    e1bpmepotext-po_item = Po line item number .
    e1bpmepotext-text_id = txtid.
    e1bpmepotext-text_form = textform.
    e1bpmepotext-text_line = line item text .
    idoc_data-sdata = e1bpmepotext.
    APPEND idoc_data.
    CLEAR idoc_data.
    CLEAR e1bpmepotext.
please help me it is urgent
Thanks
Venkatesh

Hi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra.

Service long text not copied in PO print preview

Hi,
I have maintained Long text while creating Service master...Now when i am creating PO for that service...In the Item table under Service text coloumn , if i am clicking on it , i am getting my text which was maintained while creating Service master...Now after saving, if i am seeing this is print preview, my long text data is not getting copied in PO print preview..
What went wrong?
uts

Hi Utsav,
If the text was short is it shown in prinit preview ?
If yes , then Contact ur ABAPer for adjusting the form .
If not ,change the Form - Sapscript through ABAPer to print the changes
Regards
Ramesh Ch

Text in PO(text tab in header & item) is not shown in the Print Preview

Similar Messages

Maybe you are looking for