Popup on click of a toolbar button during the call

Hi,
I created a custom button in the Interaction center toolbar to open up a decision popup. The popup opens fine when i am not in the call whereas if i am in a call the popup doesn't open.
Is this the standard behaviour? If that is the case is there any workaround to open a popup during the call?
Thanks
Selvan

IF param1-value EQ 'ZPOPUP'.
      DATA lo_popup TYPE REF TO if_bsp_wd_popup.
      lo_popup = me->comp_controller->window_manager->create_popup_2_confirm(
                            iv_title          = 'Test Popup'
                            iv_text           = 'Test Popup'
                            iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_yesno ).
      lo_popup->open( ).
      RETURN.
    ENDIF.

Similar Messages

Decision popup on click of a custom toolbar button during the call

Hi,
I created a custom button in the CTI toolbar to open up a decision popup. The popup opens fine when i am not in the call whereas if i am in a call the popup doesn't open.
Is this the standard behaviour? If that is the case is there any workaround to open a popup during the call?
Thanks
Selvan

IF param1-value EQ 'ZPOPUP'.
      DATA lo_popup TYPE REF TO if_bsp_wd_popup.
      lo_popup = me->comp_controller->window_manager->create_popup_2_confirm(
                            iv_title          = 'Test Popup'
                            iv_text           = 'Test Popup'
                            iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_yesno ).
      lo_popup->open( ).
      RETURN.
    ENDIF.

Adding toolbar buttons in the beginning

Hi Experts,
Can somebody tell me how to add my own toolbar buttons in ALV in the beginning.
When i am adding buttons using the event handler class it is adding the buttons only at the end. I want the buttons in the very beginning.

Hi Aditya,
I am adding toolbar buttons using the below method.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
    DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
    CLEAR ls_toolbar.
    MOVE 3 TO ls_toolbar-butn_type.
    APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to create new skills
    CLEAR ls_toolbar.
    MOVE 'CREATE'(000) TO ls_toolbar-function.
    MOVE icon_create TO ls_toolbar-icon.
    MOVE 'Create Detail'(001) TO ls_toolbar-quickinfo.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to change existing information
    CLEAR ls_toolbar.
    MOVE 'CHANGE'(003) TO ls_toolbar-function.
    MOVE icon_change TO ls_toolbar-icon.
    MOVE 'Change Detail'(004) TO ls_toolbar-quickinfo.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to display information
    CLEAR ls_toolbar.
    MOVE 'DISPLAY'(006) TO ls_toolbar-function.
    MOVE icon_display TO ls_toolbar-icon.
    MOVE 'Display Detail'(007) TO ls_toolbar-quickinfo.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to delete information
    CLEAR ls_toolbar.
    MOVE 'DELETE'(009) TO ls_toolbar-function.
    MOVE icon_delete TO ls_toolbar-icon.
    MOVE 'Delete Detail'(010) TO ls_toolbar-quickinfo.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.                    "handle_toolbar

Sending data during the call with java enabled mobile devices

hi every one ,
this is the problem :
i have 2 mobile phone with java enabled os , i want to call (dial) from phone1 to phone2 with java code , (this will be done by platformRequest("tell:123456"))
AND then i want to for example press key '1' in phone1 during the call some program send this key to phone2 and in phone2 i want to switch this key and understand that was key '1' ...
how can i send this data for example a key pressed event to another phone with J2ME ???
i am developing it with netbeans Mobile Application by the way ...
could you please tell me your opinion and help me in this ,
Thanks a lot ,
Omid

Hi Kanagaraja L,
Thanks for you response.
No I haven't created Created RFC Destination , this RFC destination will be of my JAVA system ???.
I have tried creating the partner logical system in WE20 and dine the following steps:
1. Partner No.   IDES800     Ides 800 System - Sender System
    Partn.Type    LS          Logical system
2. The tab Post processing : permitted agent is filled with default parameters.
3. Then in the outbound parameter table control I have pressed the add record button and got a new screen in
    which I have made the following entry :-
Partner No.           IDES800        Ides 800 System - Sender System
Partn.Type            LS             Logical system
Partner Role          LS             Logical system
    Message Type      SYNCH                            ALE:Dummy Message Type for De
    Message code
    Message function
Under tab Outbound options :
Receiver Port = A000000008 (This I have selected from F4 help)
Basic type = SYNCHRON
Saved it with the above data.
Now I am not able to understand how to do the things you have mentioned in 3rd step in your reply.
What are all the things I have to do kindly tell , as I am very new to Idocs so don't have much knowledge.
Edited by: Rachit Khanna on Dec 7, 2009 1:49 PM

Iphone 5 with IOS 7.02 sensive to change facetime during the call

It was an issue when using Ipgone 5 with ios & above.
when talking it was so eassy to touch the screen and chnage to facetime or mute the call
as i remember from the previous time it need to press the button to call those manual out...
according to this new arrangement, I have more than 50% of call will drop during the call.
plesae help to how prevent this

Hi cltbox,
Thanks for visiting Apple Support Communities.
If your iPhone does not connect to a Wi-Fi network, but other devices can, try these troubleshooting steps first:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Update your device to the latest version of software.
You can find the troubleshooting article with these steps here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers,
Jeremy

My LCD does not turn off during the call. I have a iphone 4. What do i do?

My LCD does not turn off during the call. I have a iphone 4. What do i do?

You may have a defective proximity sensor but try some basic troubleshooting first...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

When making or receiving calls on my iPhone 4, I can hear the person on the other end, but they can't hear me. This happens most of the time, but occaisionally, it works! Sometimes it starts during the call...Can you help me?

Infos:
IPhone 4, 32 GB
IOS 7.1.2
Problem:
Videos, memos and other sound microphone using applications work without any problem. It just appears when calling or being called. Sometimes it starts during the call.
Situation:
I sent my damaged IPhone 4 to apple for reparation. I bought it for 180 € + 20 € for my retailer.
Some calls later this problem started (only at the new or repaired IPhone). My 3 month warranty is almost over (4 weeks left)
Steps to solve the problem:
- rebootet the IPhone several times
- made a backup (iCloud and ITunes) and recovered it again
- I set back all settings to standard.
--> Nothing changed
Then I went to my retailer, who sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Started at the second call I received. Now the warranty time is going to run out in 4 weeks.
Open Questions:
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. Do they want to cheat me, so my warranty runs out? Thanks for any help

I have the same problem.
IPhone 4
IOS 7.1.2
My retailer sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Now the warranty time is going to run out in 4 weeks.
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed.

Im from argentina and i got a problem with my earphone of the iphone 4s when i make a call i earphone or speaker make and strange noise or like an interference during the call and when i finish the call still doing the same noise and i dont know why?

my eraphone of my iphone 4s white unlocked make strange noises during the call and still doing the noise like an interference or saturing the spekaer

This is a common problem with iPhone 4s (and IOS 5) There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.

Disturbing sounds during the calls / impossibility to finish the call then

Dear Apple,
always when any message comes or alarm is set upetc and I am having a phonecall at this moment, always all these sounds are disturbingme during this call. And the biggest problem is to finish the call then – i cantclick on „Finish“ because of previously incoming notifications shown on thescreen. How to solve this situation? Is there any chance not to be bothered bysounds during the calls?
Thanks for your help. Pavel

Flip the ring/silent switch while on a call.

An exception occurred during the call of a business method

An unexpected exception occurred during the call of a
business method...Im calling the business object thru the business Delegate.Im calling the business method with an argument as hash table .. And Im using Oracle 9i application server.. Hash table contains data packed in the form of xml...
The exception thrown is
java.lang.IndexOutOfBoundsException int java.io.ObjectInputStream.read(byte[], int, int) ObjectInputStream.java:1808 void oracle.xml.io.XMLObjectInput.ensureCapacity(int) XMLObjectI nput.java:347 byte oracle.xml.io.XMLObjectInput.peekByte() XMLObjectInput.java :163 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1800 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1797 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1797 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1797 void oracle.xml.parser.v2.XMLElement.readExternal(java.io.ObjectI nput) XMLElement.java:1574 int java.io.ObjectInputStream.inputObject(boolean) ObjectInputS tream.java:1212 java.lang.Object java.io.ObjectInputStream.readObject(boolean) ObjectInputSt ream.java:386 java.lang.Object java.io.ObjectInputStream.readObject() ObjectInputStream.ja va:236 void java.util.Hashtable.readObject(java.io.ObjectInputStream) H ashtable.java:799 java.lang.Object java.lang.reflect.Method.invoke(java.lang.Object, java.lang.Object[]) native code boolean java.io.ObjectInputStream.invokeObjectReader(java.lang.Objec t) ObjectInputStream.java:2214 int java.io.ObjectInputStream.inputObject(boolean) ObjectInputS tream.java:1411 java.lang.Object java.io.ObjectInputStream.readObject(boolean) ObjectInputSt ream.java:386 java.lang.Object java.io.ObjectInputStream.readObject() ObjectInputStream.ja va:236 java.lang.Object com.evermind.server.ejb.EJBUtils.cloneObject(java.lang.Objec t, com.evermind.server.ejb.AbstractEJBHome)

Carol,
The file is not being read by the programmer.
The problem seems to be coming when the code tries to return from an ejb call A hashtable is returned while coming back. In this hashtable, the data is present in the form of XML DOM Object(oracle implmentation, because oracle xml development kit is used). I think this exception is coming when EJB tries to serialise the object to send it back.
So, this exception is compeletely stemming from internal classes of Oracle
The code is part of a web project.
regards,
Amol Behrani

How to delete keypad log made during the call???

Well , i am facing this problem that i m unable to clear the key pad log made during the call.
i tried to reboot the system ,but still the problem persists.
every time i call ,the last time dailled number flash
please help

Hello nandan1989,
You may need to reset your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If you're still seeing the last dialed number flashing on the screen, you may need to restore your iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Cheers,
Allen

WE DEMAND CALL RATES BACK DURING THE CALL!!! 6.20....

Hi
this has been going for some time now, i reported this with Skype's second tier level support at [e-mail removed for privacy and security], i was being told that the DEVs will implement this very soon, this was May and August, YET this feature is not back.
Can someone else email them there please? They are nice answeering back but not much done for this since 5 months+.
I think is one of the MOST USEFUL FEATURES to have, that is when you call that in the window you will display call costs!
I recently upgraded to the very latest 6.20.0.104 yet the feature is not YET back!
I am quite disappointed and i think it's a technique so that people will not see what they are spending during the calls!
Anyone with me? Let's keep this thread active until someone at Skype does something!
thanks
Gabrio

It also annoys me that the call credit is no longer shown during calls. This was a helpful feature in a previous version of Skype, especially when overseas or when calling mobile numbers. As I top up the credit manually, its handy to know when one is reaching $0.00 while a call is in progress.
Bring back the call $ meter
[Removed for privacy]

Can you adjust the height of the toolbar button in the skin file?

Can I manually adjust the height of the toolbar navigation buttons in the skin file? It seems no matter how tall I make the nav panel, the buttons adjust size accordingly. Can I tell it to be 50% or something like that? For example, this is what I see for the glossary button.
<toolbaritem mode="BtnWithIcon Mode" type="built-in-glossary" id="4">
   <name>Glossary</name>
   <text>::??DefaultWebSkinText??::</text>
   <color></color>
   <image></image>
   <icontype>none</icontype>
   <selected>
    <color></color>
    <image></image>
    <icontype>none</icontype>
   </selected>
   <style>100</style>
</toolbaritem>
Notice I am not using custom images or anything, just plain text.
Thanks

Hi Josh
You must be someone that dearly loves digging into code.
The simplest way to adjust the buttons is to use the built in Skin Editor.
Hmmm, and in writing that response it occurs to me that you haven't exactly advised which of the outputs you are creating. The skin editor I'm referring to is the WebHelp skin editor. To open it, click View > Pods > Project Set-up. Once that pod is open you should see the Skins folder. Expand that and double-click the skin you are using to open and edit it using the skin editor.
Cheers... Rick

How to remove the delete and edit toolbar buttons from the Overview page

Hi,
In the account/contact overview page, we see that the interaction history assignment block does not support the EDIT and DELETE options.
However, when we click on the hyperlink description of an activity in the interaction history, we get into the overview page of the activity. Here we can see the DELETE button and the EDIT button.
Is there a way to remove these two options from the overview page of an activity which is in COMPLETED status and in the interaction history section?
Please advice.
Thanks & Best Regards,
Ramesh.
PS: We use CRM 5.2 Web UI.

You can hide the box that shows the snippets and the "Restore Previous Session" box with code in userContent.css
*http://kb.mozillazine.org/userContent.css
*http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
*ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
<pre><nowiki>@-moz-document url(about:home){
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
/* hide sessionRestore container on the about:home page */
#sessionRestoreContainer { display: none !important; }
</nowiki></pre>

Click on a link button by the SDK

Is this possible to CLICK on a LINK BUTTON so it automaticly open the form
For instence, I would like to click on the link button of an Opportunity to open the Business Parner Form
Can it be made from the SDK ?
From what I saw, there's no Click or Execute or anything from a LinkButton object

Hi,
U can catch the item press event and write code
if(pVal.ItemUID=="id of link button")
oSboApplication.ActivateMenuItem("2561");
Hope u will get help...
Thanks and Regards,
Lalit Narayan

Popup on click of a toolbar button during the call

Similar Messages

Maybe you are looking for