Popup on clicked, not focused control
Hi,
Is there anything that can be done about the feature that if field A has focus and the user right-clicks on field B, the popup for field A (the focused one) is shown?
I was afraid so, PJCs won't probably help since this seems to be a top-level thing with mouse handling...
Similar Messages
-
Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html -
Why can't i delete songs from older i-pod touch, delete feature greyed out and right click or holding control and clicking do not offer delete option in I-tunes. I've tried using both a Mac Book and PC with newer and older versions of I-tunes.
It sounds like you are try to delete the songs by connecting the iPod to other than the computer from which the songs were synced. You can only delete songs synced to an an older iPod (pre iOS 5) by connecting the iPod to its syncing computer and unsync them.
If you want to change syncing computers see:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Firefox inspector not focus on the element through clicking inspect.
As the new firefox for developer came out, I downloaded & used it as main browser.
However, I found out that the Inspector not focus or show direct element I inspected. It just open the inspector window & show the whole body tag.
Is this something from the new Firefox? or from any add-ons of mine?It happens all the time. As I start Firefox in Safe Mode, it works just fine.
Then I start Firefox normally & disable hardware acceleration + some add-ons that I haven't install on my previous Firefox.
It somehow seems to work right now even though I turned hardware acceleration back on & enable almost every add-on of mine + appearance except Wired Marker + ADB Helper from Firefox. -
Popup (minimized) out of focus - external ws call
Hi All,
I have a popup and a dialog (Ok, Cancel). On this popup I have exposed a java wrapper for calling an external web service as a data control button, say "Search Employee" button.
When I make a call on this popup by clicking the "Search Employee" button, the pop up stays for few seconds, and then loses focus (basically, I lose it). However, on re-clicking the button it is back in focus with the search results.
How can I have the popup stay up (in focus) until I click dialog buttons either Ok, or Cancel?
I have set type property on af:dialog to "okCancel", and did not see any difference.
Thank you,
VJIn the popup Property Inspector under "Other" options there is a property called "AutoCancel" default value is "enabled" change it to "disabled" and this should fix popup being out of focus issue. There is excellent documentation for it here:
here -
Menu on right-click for numeric control
Hello,
is there a way to program a "menu on right-click" for a control (e.g. numeric), like there is for table controls?
I'm working with CVI 8.0.1
Thanks & Best Regards,
GregYes, every control can be added a popup menu with a few instructions.
Design the menu nar in the UIR editor; do not associate it to any panel
Load the menu bar when needed with the line menuHandle = LoadMenuBar (0, "myfile.uir", menuBar): by passing 0 as the panel handle it will not be associated to any of them
In the numeric callback add these instructions:
switch (event) {
case EVENT_RIGHT_CLICK:
// Context menu
choice = RunPopupMenu (menuHandle, menuBar_Menu, panel, eventData1, eventData2, 0, 0, 0, 0);
switch (choice) {
case menuBar_menu_item1:
// menu item handling code
break;
break;
Passing eventData parameters to RunPopupMenu function ensures that the menu is displayed at the mouse position.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Why do I get a popup upon arriving at my page that says "
Click to activate control". It doesn't allow the button that is
designed with a rollover effect to work until I first click
somewhee on the page. This is making me have to double click every
button to get the action I am asking for from it to work.
I am using explorer version 6. However, when I use another
users firefox brouser I do not see this message " Click to activate
control", it works as I intended it to.
Can anybody tell me what I am doing wrong?It's a great question aniebel - and the answer is - a better
forum structure - one that supports
stickies and announcements and many of the features that are
availeble in free forum software like
phpbb.
I use a newsreader to access this forum because the web forum
is just too slow and lacking of
features that would enable repeat topics to diminish and
various other tools.
We can only hope that someday this forum is improved for the
betterment of all.
-c
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
aniebel wrote:
> I feel the same way but I have to admit that when I
first started out, it was
> not obvious to me that the answers could be found via
Google or even by
> searching the forums. Sometimes people don't know to
look because it doesn't
> occur to them that that's an option. I know... weird in
this day and age.
>
> In any case, I would also like to see the number of
repeat questions reduced
> but how does that get accomplished on this forum? It
doesn't seem incredibly
> user friendly or robust as some have mentioned. If these
things were more
> obvious, I doubt this would happen as much. I guess it
is what it is since it's
> free.
>
> Any suggestions on how to prevent repeat posts?
> -
Canon 6D will not focus or flash in "Live View" mode.
My Canon 6D will not focus or flash in "Live View" mode. I have a canon 430ex II and a E-ttl flash connected with a sync cord for E-ttl function. The camera does simulate shutter action, but no photo is taken. How can I over-come this problem.
Once in a while, after trying to take several photos it will start working, but usually not.
Solved!
Go to Solution.Hi Shadowcat!
Thanks for posting.
It sounds like the AF Method is set to Quick Mode. When the camera is set for Live View Shooting, there are different AF Methods that can be set. In Quick Mode, the camera uses its dedicated AF sensor to focus when you press the shutter button down halfway.
The image on the LCD will be interrupted while the camera tries to focus because the shutter closes and the mirror drops back over the image sensor. This may look as though the camera is taking a picture, but it is not, it is only focusing. No flash is fired during this process either. Continue to hold the shutter button halfway until focus is achieved, at which point the image will return to the LCD. Then you can press the shutter button the rest of the way down to take the picture. The flash will fire and an image will be recorded.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
How to close the detach popup on click of a button in the panel collection
Hi,
I'm using Jdeveloper 11.1.2.3.0.
I have an af table surrounded by panel collection. There is a button on panel collection to commit the changes in the table.
Clicked detach button to view the table in full browser.
On click of Commit button, the detach popup is not closed. I have set partialSubmit of that button to false. Then also detach popup is not closed.
Can anybody suggest me how to close the detach popup on click of a button in the toolbar.
Thanks,
VinodHi Frank,
Thanks for your response. Popup is not closed.
I tried this approach, when the view tree is navigated on the Detach, I see that the tree is same as if it is traversed on the page without detach.
Printed client id and UI component class in the while loop, result is as below.
r1:0:pc1:t3 class oracle.adf.view.rich.component.rich.layout.RichToolbar
r1:0:pc1 class oracle.adf.view.rich.component.rich.output.RichPanelCollection
r1:0:ph2 class oracle.adf.view.rich.component.rich.layout.RichPanelHeader
r1:0:pgl1 class oracle.adf.view.rich.component.rich.layout.RichPanelGroupLayout
r1 class oracle.adf.view.rich.component.rich.fragment.RichRegion
pgl1 class oracle.adf.view.rich.component.rich.layout.RichPanelGroupLayout
db2 class oracle.adf.view.rich.component.rich.layout.RichDecorativeBox
db1 class oracle.adf.view.rich.component.rich.layout.RichDecorativeBox
psl1 class oracle.adf.view.rich.component.rich.layout.RichPanelStretchLayout
ps1 class oracle.adf.view.rich.component.rich.layout.RichPanelSplitter
f1 class oracle.adf.view.rich.component.rich.RichForm
Tried with setting partialsubmit property to false on the command button, still the popup is not closed and my Faces Message are shown behind the detach popup.
Thanks,
Vinod -
Has anyone a solution to two update having the following popup-"We could not complete your request". There was an error in the App store. Please try again later. I've tried over 4 days without any change.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Single click on tree control navigation
Hello I have a tree control where I have include the navigation, I know that there is a method
HANDLE_NODE_DOUBLE_CLICK FOR G_TREE
but is there an method for only one click, I want to change my alv grid data when I click on several nodes in my tree controlHello Muhammet
I have re-written my sample report ZUS_SDN_TWO_ALV_GRIDS into ZUS_SDN_TREE_AND_GRID_CONTROL which is now display a tree control together with the ALV grid.
When you analyze this new report you will see that every step of the program logic is as I described in my previous e-mails.
*& Report ZUS_SDN_TWO_ALV_GRIDS
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
* PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
* PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
*& Thread: single click on tree control navigation
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1143770"></a>
REPORT zus_sdn_tree_and_grid_control.
TYPE-POOLS: abap, cntl.
TYPES: node_table_type LIKE STANDARD TABLE OF mtreesnode
WITH DEFAULT KEY.
* CAUTION: MTREESNODE is the name of the node structure which must
* be defined by the programmer. DO NOT USE MTREESNODE!
CONSTANTS:
BEGIN OF c_nodekey,
root TYPE tv_nodekey VALUE 'Root', "#EC NOTEXT
child1 TYPE tv_nodekey VALUE 'Child1', "#EC NOTEXT
* child2 type tv_nodekey value 'Child2', "#EC NOTEXT
new1 TYPE tv_nodekey VALUE 'New1', "#EC NOTEXT
new2 TYPE tv_nodekey VALUE 'New2', "#EC NOTEXT
* new3 type tv_nodekey value 'New3', "#EC NOTEXT
* new4 type tv_nodekey value 'New4', "#EC NOTEXT
END OF c_nodekey.
DATA:
gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_left TYPE REF TO cl_gui_container,
go_cell_right TYPE REF TO cl_gui_container,
go_tree TYPE REF TO cl_gui_simple_tree,
go_grid1 TYPE REF TO cl_gui_alv_grid,
** go_grid2 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1,
gt_knvv TYPE STANDARD TABLE OF knvv.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
** CALL METHOD go_grid1->set_current_cell_via_id
** EXPORTING
*** IS_ROW_ID =
*** IS_COLUMN_ID =
** is_row_no = es_row_no.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
* CLASS LCL_APPLICATION DEFINITION
CLASS lcl_application DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_event TYPE string READ-ONLY,
md_node_key TYPE tv_nodekey READ-ONLY.
CLASS-METHODS:
handle_node_double_click
FOR EVENT node_double_click
OF cl_gui_simple_tree
IMPORTING node_key,
handle_expand_no_children
FOR EVENT expand_no_children
OF cl_gui_simple_tree
IMPORTING node_key.
ENDCLASS. "LCL_APPLICATION DEFINITION
* CLASS LCL_APPLICATION IMPLEMENTATION
CLASS lcl_application IMPLEMENTATION.
METHOD handle_node_double_click.
" this method handles the node double click event of the tree
" control instance
" show the key of the double clicked node in a dynpro field
md_event = 'NODE_DOUBLE_CLICK'.
md_node_key = node_key.
" Trigger PAI and set ok-code = 'DETAIL'
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DETAIL'
* IMPORTING
* rc =
MESSAGE md_node_key TYPE 'I'.
ENDMETHOD. "HANDLE_NODE_DOUBLE_CLICK
METHOD handle_expand_no_children.
" this method handles the expand no children event of the tree
" control instance
DATA: node_table TYPE node_table_type,
node TYPE mtreesnode.
" show the key of the double clicked node in a dynpro field
md_event = 'EXPAND_NO_CHILDREN'.
md_node_key = node_key.
IF node_key = 'Child1'.
* add two nodes to the tree control (the children of 'Child1')
* Node with key 'New1'
CLEAR node.
node-node_key = c_nodekey-new1.
node-relatkey = c_nodekey-child1.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-isfolder = ' '.
node-text = 'New1'(ne1).
APPEND node TO node_table.
* Node with key 'New2'
CLEAR node.
node-node_key = c_nodekey-new2.
node-relatkey = c_nodekey-child1.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-n_image = '@10@'.
node-expander = ' '.
node-text = 'New2'(ne2).
APPEND node TO node_table.
CALL METHOD go_tree->add_nodes
EXPORTING
table_structure_name = 'MTREESNODE'
node_table = node_table
EXCEPTIONS
failed = 1
error_in_node_table = 2
dp_error = 3
table_structure_name_not_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
** MESSAGE A000.
ENDIF.
ENDIF.
ENDMETHOD. "HANDLE_EXPAND_NO_CHILDREN
ENDCLASS. "LCL_APPLICATION IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1 UP TO 100 ROWS
WHERE bukrs = '1000'.
PERFORM init_controls.
* Display data
gs_layout-grid_title = 'Customers: Sales Areas'.
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'KNVV'
is_layout = gs_layout
CHANGING
it_outtab = gt_knvv
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid1->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
* User has pushed button "Display Details"
WHEN 'DETAIL'.
MESSAGE gd_okcode TYPE 'I'.
PERFORM entry_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ENTRY_SHOW_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM entry_show_details .
* define local data
DATA:
ld_row TYPE i,
ls_knb1 TYPE knb1.
IF ( gt_knvv IS INITIAL ).
SELECT * FROM knvv INTO TABLE gt_knvv
FOR ALL ENTRIES IN gt_knb1
WHERE kunnr = gt_knb1-kunnr.
ELSE.
REFRESH: gt_knvv.
ENDIF.
ENDFORM. " ENTRY_SHOW_DETAILS
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 1
columns = 2
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_left.
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = go_cell_right.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_double_click FOR go_grid1.
PERFORM create_and_init_tree.
ENDFORM. " INIT_CONTROLS
*& Form CREATE_AND_INIT_TREE
* text
* --> p1 text
* <-- p2 text
FORM create_and_init_tree .
DATA: lt_node_table TYPE node_table_type,
lt_events TYPE cntl_simple_events,
ls_event TYPE cntl_simple_event.
* create a tree control
CREATE OBJECT go_tree
EXPORTING
parent = go_cell_left
node_selection_mode = cl_gui_simple_tree=>node_sel_mode_single " single node selection is used
EXCEPTIONS
lifetime_error = 1
cntl_system_error = 2
create_error = 3
failed = 4
illegal_node_selection_mode = 5.
IF sy-subrc <> 0.
** MESSAGE a000.
ENDIF.
* define the events which will be passed to the backend
" node double click
ls_event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
** ls_event-appl_event = 'X'. " process PAI if event occurs
" NOTE: Do NOT register as application event !!!!!
APPEND ls_event TO lt_events.
CALL METHOD go_tree->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
IF sy-subrc <> 0.
** MESSAGE a000.
ENDIF.
SET HANDLER:
lcl_application=>handle_node_double_click FOR go_tree,
lcl_application=>handle_expand_no_children FOR go_tree.
* add some nodes to the tree control
* NOTE: the tree control does not store data at the backend. If an
* application wants to access tree data later, it must store the
* tree data itself.
PERFORM build_node_table USING lt_node_table.
* node_table_structure_name = 'MTREESNODE'
* A programmer using the tree control must create a structure in the
* dictionary. This structure must include the structure TREEV_NODE
* and must contain a character field with the name 'TEXT'.
CALL METHOD go_tree->add_nodes
EXPORTING
table_structure_name = 'MTREESNODE'
node_table = lt_node_table
EXCEPTIONS
failed = 1
error_in_node_table = 2
dp_error = 3
table_structure_name_not_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
** MESSAGE a000.
ENDIF.
ENDFORM. " CREATE_AND_INIT_TREE
*& Form build_node_table
* text
* --> p1 text
* <-- p2 text
FORM build_node_table
USING
node_table TYPE node_table_type.
DATA: node LIKE mtreesnode.
* Build the node table.
* Caution: The nodes are inserted into the tree according to the order
* in which they occur in the table. In consequence, a node must not
* occur in the node table before its parent node.
* Node with key 'Root'
node-node_key = c_nodekey-root.
" Key of the node
CLEAR node-relatkey. " Special case: A root node has no parent
CLEAR node-relatship. " node.
node-hidden = ' '. " The node is visible,
node-disabled = ' '. " selectable,
node-isfolder = 'X'. " a folder.
CLEAR node-n_image. " Folder-/ Leaf-Symbol in state "closed":
" use default.
CLEAR node-exp_image. " Folder-/ Leaf-Symbol in state "open":
" use default
CLEAR node-expander. " see below.
node-text = 'Root'(roo).
APPEND node TO node_table.
* Node with key 'Child1'
node-node_key = c_nodekey-child1.
" Key of the node
" Node is inserted as child of the node with key 'Root'.
node-relatkey = c_nodekey-root.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-hidden = ' '.
node-disabled = ' '.
node-isfolder = 'X'.
CLEAR node-n_image.
CLEAR node-exp_image.
node-expander = 'X'. " The node is marked with a '+', although
" it has no children. When the user clicks on the
" + to open the node, the event
" expand_no_children is fired. The programmer can
" add the children of the
" node within the event handler of the
" expand_no_children event
" (see method handle_expand_no_children
" of class lcl_application)
node-text = 'Child1'(ch1).
node-style = cl_gui_simple_tree=>style_emphasized_positive.
APPEND node TO node_table.
ENDFORM. " build_node_table
Regards
Uwe -
Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
Firefox 17.0.1 windows 7 64-bit, not focused during start
Hello sir,
I recently installed the firefox latest version (This is not an upgrade) on my new laptop running windows 7 premium, 64-bit.
When I start the firefox, it's loosing the focus and I need to click somewhere in the firefox to make it focus.
When I start the firefox in safemode, everything is working great. As understood from other questions, this seems to be the problems with the add-ons I installed. So, to investigate it, I disabled all the plugins and extensions, but no luck. Firefox is starting and but it's not focused.
The issue is reported by my friend too, who is running the same configuration.
This unfocused window is very annoying, please help us to resolve it.
You help will be highly appreciated.hello rpg.jhansi, please try this: go to firefox > help > troubleshooting information and click on profile folder/show folder. a windows explorer window should open up - in there delete the file named '''localstore.rdf''' & restart firefox afterwards. (this will reset the customizations to appearance & windows dimensions in firefox)
-
I've just installed Mavericks on my Macbook Pro, which took forever to install, and everything appears to be fine except for iPhoto. When I try and open iPhoto I get a popup saying its not supported by this OS. Anyone have any ideas??? Help please.
Click App Store from your Apple menu drop down menu then select Updates from the App Store menu bar.
-
Popup menu does not show in JTextField
I have a JPanel with a popup menu that works perfectly, as long as the right mouse button is clicked on the JPanel. However the popup menu does not show if the right mouse button is clicked on a JTextField that is within the JPanel.
What has to be done that the popup menu shows always?
this.addMouseListener(new java.awt.event.MouseAdapter()
public void mouseReleased(MouseEvent e)
this_mouseReleased(e);
protected void this_mouseReleased(MouseEvent e)
if (e.isPopupTrigger())
popPopup.show(this, e.getX(), e.getY());There are up to 20 JTextFields in the JPanels an the application has a lot of JPanels of course. Adding the listener to each and every JTextField means a lot of extra code. Is there really no generic solution to this problem???
Maybe you are looking for
-
Is there a Sync/Internet Connection Issue??
Yesterday my weather disappeared off my phone (location still there). When I try to update it gives me a "lost connection while downloading" message. I also have issue with Facebook, Twitter, you tube, and my bookmarks. They get stuck in "loading
-
5.5.3 and now difficulties connecting to remote speakers
Ever since the update to 5.5.3 I am having issues with my two airport express units which are both are set to stream music. It often now takes iTunes quite awhile to connect to the remote speakers. Not always both. More often the one that is set up
-
Hi, I have been doing various test for LFA on PRP2 IOS-XR 4.0.3. It seems that Cisco do not consider Node protection as a option while computing LFA and finding alternate backup path. Consider below topology : All routers are in ISIS L1 area and prim
-
Tranferring files from windows 7 back up file
How do I transfer my windows 7 system back up from an external hard drive to my new Mac OS X 10.7.2? The old laptop is dead.
-
Brand new ipod cracked. no damage to case...
So what gives here, I've owned several ipods, starting at the beginning with the 5g, a couple of weeks after they came out. So my wife buys me a black 60g G5 ipod, engraved, for our anniversary, and I pick it up after having it at work with me for th