Popup windows on multiple windows is opened across both monitors.

I am using Firefox 6 the latest version on Windows 7 64 bit using 2 monitors.
I was on a website that wanted me to logon via facebook. So the browser opened a popup windows.
The window that opened covered both monitors. The left edge of the window stayed on the left most monitor (correct). The top edge of the window stayed on the top of both monitors (correct). The right edge of the monitor ended alittle beyond the right most side of the right monitor; I could see the minimized but not the maximized button (incorrect). The bottom edge of the window disappeared below the bottom of both monitors (incorrect). Neither the minimized nor maximized buttons worked.

Do they drag there and snap back, or do they not drag there at all?
If they don't drag there at all, check System Preferences > Displays > Arrangement to see how the system thinks the displays are related spatially. You may need to drag left or down instead of right.
Your profile says you are running Mountain Lion, but if you have upgraded to Mavericks, there's a setting that says whether displays are in one space or separate spaces. If it is set to use separate spaces, you may see a window snap to one of the other display.

Similar Messages

  • Firefox should save session when only popup windows is open

    When I have some window with multiple tabs open and I click close button on top, it saves the session and quits. Thats ok. But when there is some hidden popup window open (or source code) it destroys the session and leaves the popup open!!!! So the menu is gone and you lose your session. When i restart FF tabs are gone. So it should save session when only some popup windows are open.
    Also it should ask what to do when i click close window, when it's unclear what to do

    It is always a good idea to close a Firefox session by clicking File > Exit or Firefox button > Exit for proper shutdown.
    Those pop-up windows are produced by JavaScript. JavaScript can disable certain features in the pop-up window. You can set some preferences using '''about:config''' so that those features are not disabled in the pop-up window. See:
    *How to use '''about:config''': http://kb.mozillazine.org/About:config
    #type '''''about:config''''' in the URL/Location bar and press the Enter key
    #if you see a warning, accept it (promise to be careful)
    #Filter = '''dom. disable_window_open_feature.'''
    #reset preferences you want to '''''false''''' by double-clicking on that preference in the lower panel on the '''about:config''' tab
    #Preferences you can reset in this case: http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Adobe PDF Plug-In For Firefox and Netscape "9.4.3"
    *Shockwave Flash 10.2 r159
    *Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
    #**Use either of the links below:
    #***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
    #***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*After the installation, start Firefox and check your version again.
    #'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
    #*Download and SAVE to your Desktop so you can find the installer later
    #*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
    #*After download is complete, exit Firefox
    #*Click on the installer you just downloaded and install
    #**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
    #*Start Firefox and check your version again or test the installation by going back to the download link below
    #*'''Download and information''': http://www.adobe.com/software/flash/about/
    #**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
    #**Use IE to go to the above site to update the IE ActiveX
    #*'''Download Manual installers'''.
    #**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
    #**Note separate links for:
    #***Plugin for Firefox and most other browsers
    #***ActiveX for IE
    #'''Update the [[Java]] plugin''' to the latest version.
    #*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    #**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    #*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    #*Java Test: http://www.java.com/en/download/help/testvm.xml

  • Popup window not opening in IE 6.0, SP1

    Hi Friends,
    Whats the version information for Popup windows to open.
    Not able to view the popup window on Internet Explorer 6.0 , build 2800.1106, SP1.
    It gives Runtime Error.
    I can see the popup windows in IE6.0.2900.2180, SP2
    any clue?
    Thanks.
    Message was edited by: Nav

    Naveen,
      Normally the browser should support the javascript version you are using. The best way is to upgrade the browser to higher SP if it runs on a different SP.
    Usually, Javascript erros are very abstract, so tough to handle. So, got to be careful when coding.
    Check this link for details on Javascript erros etc
    http://www.irt.org/script/general.htm
    Hope this helps,
    Kumar

  • In a multiple monitor situation, how do I get popup windows to open on the same monitor as the parent application is displayed.

    I have two monitors. I have an application that I run all day, displayed on my secondary monitor. Whenever a popup windows is launched form that application, it always opens on the primary monitor. Very annoying. Any way to get the popup to launch in on the same monitor as the parent application?

    Did you solve this problem ?

  • How to configure a link in a popup window to open a tab in main window.

    I have put videos in popup windows with a link to their relevant main windows. I have used a behaviors extention from adobe to close the popup with the same link button, but the page doesn't open in the main window.
    Here is the link:
    <h2><a href="http://mydom.info/new.php" style="text-decoration:none" onclick="close_window()">Full Article</a></h2>
    I can't work out why the browser doesn't pick up the link? Is it because the link is doing two jobs, closing the window and linking to the page?
    Help would be great.

    Correct. You can use this code:
    app.launchURL("http:\\www.adobe.com", true);

  • How Popup window automatically open, when I got new approval from any user?

    Hi Friends,
    I have an application in Form6i, where different users send approvals to me, when somebody send me new approvals there is indication to me, I used timer, and I Execute Query in When Timer Expire trigger , so a display item is appear when I received new approval. But this is only applicable on the Approvals screen, when I navigate to another screen I have not get an indication of new Approvals.
    Now I want to get an indication of an approval on every screen in my application in the form of Popup window.
    A window is automatically open before me on any screen when new approval is come.
    THIS IS JUST LIKE YAHOO MAIL BOX, WHEN WE WORKING IN ANY APPLICATION JUST LIKE MS WORD, EXCEL ETC. AND WHEN NEW MAIL COMES IN ACCOUT THERE IS AN INDICATION IN STATUS BAR “RECEIVES ONE NEW MESSAGE”
    Please send me the solution of this problem on urgent basis.
    Best regards,
    Shahzad

    Instantiate from your forms application a second forms application which calls your form with the timer or which contains a procedure which has registred itself for a message (use dbms_pipe).
    Your starting form code will call via a host command ifrun32.exe with all required parameters and the name of the form containing the timer or listener. Now you have two forms applications running on your pc but the "mailbox"one can get minimized and maximized the moment a message is detected.
    Marcos

  • How to block popup windows that opens up on clicking a link?

    Hi,
    How to block pop-up windows that opens up when a link is clicked? The feature in IE is to set the Blocking level as 'High: Block all pop-ups (Ctrl + Alt to override)' in Pop-up Blocker settings.
    Is there a similar feature in Mac?
    Thanks & appreciate the support

    In the menu bar, Safari > Preferences > Security > Web Content
    Some popups will not be blocked by this method, but blockable popups will be.

  • Enhancement of Popup window of Open contracts during Sale Order Creation.

    Hi,
    I have a requirement as follows.
    1. During creation of Sales Order we are getting a pop up window with the list of open Contracts.
    Currently there are following fields in that popup.
    1. Doc Num, 2. Doc Type 3. Valid From 4. Valid To.
    Now my requirement is to add one more value (Document Description) in this. Please help me if any one did simillar enhancement.

    Transaction Code - VA01                     Create Sales Order
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    No of Exits:         15
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • Popup windows flash open then closed while watching videos or visitng websites.

    It seems to happen more often when I am watching a video on Youtube or Hulu.
    The video is playing normally and all of a sudden what looks like a pop up window opens and immediately closes. Sometimes you can see what looks like a person or an ad, but only for a fraction of a second and then it's gone. This will happen over and over again and it's super irritating. The windows seem to be of all sizes, they pop up in different parts of the screen and the frequency changes so that sometimes this happens a lot and other times there are fewer.
    I've scanned for viruses with several programs, Avast and Trendmicro HouseCall.
    OS is Windows 7
    Firefox and Flashplayer are all up to date.
    I've also scanned for Malware and Spyware.
    I have even turned off Firefox's popup blocker so I might see where these windows are coming from, but no popup ads ever open it just keeps flashing these windows open and immediatly closed.

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Please report back soon.

  • Maximise Task Pages in iFrame popup Window when opened From ADF Task List

    All,
    We have built a custom worklist application that implements the Out of the Box Task list ADF Task flow. For application reasons, we have disabled the preview window (bottom section of task list) by using the Task Flow paramters.
    When navigating from the tasklist, it launches a new browser window for the applicable task.FYI the browser url seems to take the pattern of that below.
    http://<Server>:8001/LVWorkspace/faces/__ADFvDlg__?_adf.ctrl-state=fpkt030re_18&_vir=/LVWorkspace/faces/adf.dialog-request%3F_adf.ctrl-state%3Dfpkt030re_18&loc=en-US&_minWidth=750&_minHeight=600&_rtrnId=1355238885906&_afrLoop=1204852572759076&_afrWindowMode=1&_afrWindowId=ADFDialog10
    My question is is it feasible to control the size of this window? It allows seems to open a set size. The ideal would be to maximise the window to a full screen. This would save the users having to do this manually. Does anyone know if this is feasible? Or have any ideas suggestions for items you have done to perform similar functionality.
    Any help would be appreciated to see if this is feasible.
    FYI, we are using SOA/BPM 11.1.1.6.3
    Many Thanks
    Dave

    Hi,
    Sorry to reply to my own threads. If anyone doesn't have a resolutin for this, has anyone experienced issues like this with your own custom workspaces?
    Also in IE, when the tasklist page is closed (prior to it launching completely) the workspace reamins in model form.
    Has anyone experience this issue?
    Regards Dave

  • How do I get a popup window to stay open with a validation failure?

    Environment:
    APEX 3.1.1.00.09 on AIX 5.3
    Oracle 10.2.0.2 EE on AIX 5.3
    Sample app on apex.oracle.com:
    Workspace: galway
    User: gwicke
    Pass: gwicke
    Steps:
    1- run Page 3
    2- select J & B Marketing from drop down
    3- select only contract from drop down
    4- click on Edit Existing Contract
    5- click on Add New Builder
    6- Enter the same builder from calling page: Builder Name: Alvarez Construction City: Baton Rouge State: LA
    7- click Add Builder
    The original version of this page would add the new builder to the database, pass the information back to the calling page and close the popup window. Cool.
    I have added a validation on the popup page (Page 4) to check for an existing builder with the same name and city.
    What I'd like to have happen is the popup window stay open so the user can see the error message with the instructions for them to click on the CANCEL button and then select the builder from the drop down list. When they click the CANCEL button I need to have the window close.
    What is happening is the window is closing as soon as the Add Builder button is clicked.
    This is because there is a region called 'scripts' that contains javascript to submit the page and close the window and the condition on the region is only that the Builder Name is not null. So, the good news is that I understand why the window is closing but I'm not sure the best way to keep it open when the error condition happens.
    Thanks very much for your help. I'm sure you recall everything about this app you helped me with many months ago. NOT!! :-)
    -gary

    Gary, I think I've got it working the way you want.
    1. I added a conditional branch to page 4 which fires on the not exists builder condition condition.
    2. I disabled the reset page process. With that running, the conditional branch to page 4 woul always fire because the builder name and city were always cleared by the time the branch executed.
    3. I noticed that the new builder did not show up in your select list until I refreshed page 2. I haven't had a chance to look at that. Maybe a branch back to page 2 from page 4 after successfully loading a new builder will take care of that.
    Bob

  • Open popup window and bring text to opener window jsp [help~]

    how to click a button then open popup window.
    and add somthing in the popup window, that can bring the text in the popup window to opener window in jsp.

    This is a javascript/html question, and has nothing to do with Java/JSP.
    You could do it with plain javascript/html using window.opener.
    I would recommend using something like a [YUI 2 Panel|http://developer.yahoo.com/yui/container/panel/] to do it.
    Opening new windows is a thing of the past.

  • Javascript to open popup window and disable parent window

    Hello,
    Can anyone please help me the javascript issue.
    I have a button which opens up a pop window and when this popup window is opened i want to disable the parent window and enable it when i close the popup window.
    can anyone please help me with a possible approach.
    Thanks,
    Orton
    Edited by: orton607 on Aug 25, 2010 2:19 PM

    jari,
    I have a problem with this modal window approach and I have noticed. The thing is I am able to open up a popup window which is a simple data entry form. In this form i have the button Create which calls a javascript function and then an pl/sql insert process.
    Below is the javascript function for the button create
    function createNew()
    doSubmit('CREATE');
    alert('Successfully inserted the record. Click OK to close popup window and to \n view details of the new inserted record please select the table on parent window.');
    window.close();//close the popup window
    window.opener.doSubmit('REFRESH');
    //call doSubmit function on the parent window to cause the page to refresh.
    }The problem, i have is when i open up a popup window in this window when I click on the create button, its again opening up a new empty window. i don't understand what might be the problem.
    can you please help me out with this one.
    thanks,
    orton
    Edited by: orton607 on Aug 25, 2010 4:19 PM

  • TIP: Building Modal Popup Windows

    Build Modal Popup Pages
    Introduction
    The following is based on the 'How To Document' - 'Build Custom Popup Pages'.
    This How To will show the developer how to create Modal Popup windows with the ability to pass information back to the parent window.
    Example Scenario
    The example described in this how to adds a custom modal popup LOV to a form on the SCOTT.EMP table. Clicking the popup LOV link on the form page will popup a Modal LOV page that allows users to search by ENAME, JOB, and SAL. Selecting a value from this LOV page will close that popup LOV page and populate the ENAME, JOB, and SAL fields on the form page with the selected values. Additionally, had the user entered some data into the ENAME, JOB, and/or SAL fields on the form page, that data would be used in the initial search when the popup LOV page is first shown.
    Step 1 - Create a simple form page on SCOTT.EMP
    To create the form page, simply step through the HTML DB "Form on a Table or View" wizard against the EMP table accepting the defaults. For this example, create the form with a page number of one, and make sure to allow the ename, job, and sal fields to be editable. When the wizard completes, page 1 of the application should have the items P1_ENAME, P1_JOB, and P1_SAL on it as text fields.
    Step 2 - Create a popup page with search fields
    Next, create a page that's to be used as the popup window: Page 2. Ultimately, this page will have javascript, a report region, and some buttons. For now, though, just create a page 2 with the items P2_ENAME, P2_JOB, and P2_SAL on it as text fields.
    Step 3 - Set Modal popup page header requirements
    A) Modal windows by default cache the information they display. When creating a popup window which displays different information each time it is called or to allow searching the caching default must be switched off.
    Add the following meta-tag to the "HTML Header" field of the page-level attributes screen for page 2 to accomplish this:
    <META HTTP-EQUIV="Pragma" CONTENT="no-cache">
    B) Modal windows by default open a new window when running any redirect calls. When creating a modal popup which passes back parameters to the parent window. The modal window has to be forced to fire redirect calls within its own window rather than open a new window for the redirect.
    Add the following tag to the "HTML Header" field of the page-level attributes screen for page 2 to accomplish this:
    <base target="_self">
    Step 4 - Add Javascript call to the popup page
    Because the popup page should filter its result set based on any values that the user might have entered onto the form page, you need to add a javascript function that would pass those values off. Add the following function to the "HTML Header" field of the page-level attributes screen for page 1 to accomplish this:
    <script language="JavaScript" type="text/javascript">
      function callMyPopup (formItem1,formItem2,formItem3) {
        var formVal1 = document.getElementById(formItem1).value;
        var formVal2 = document.getElementById(formItem2).value;
        var formVal3 = document.getElementById(formItem3).value;
        var url;
      url = 'f?p=&APP_ID.:2:&APP_SESSION.::::P2_ENAME,P2_JOB,P2_SAL:' + formVal1 + ',' + formVal2 + ',' + formVal3 ;
      // IE Browsers modal popup window
      if (window.showModalDialog) {
        w = showModalDialog(url, window.self,"status:0; scroll:1; resizable:1; dialogWidth:25; dialogHeight:43");
        // w is an array returned from the modal popup containing the passback values
        if (w) {
          document.getElementById("P1_ENAME").value = w[0];
          document.getElementById("P1_JOB").value = w[1];
          document.getElementById("P1_SAL").value = w[2];
          document.getElementById("P1_SAL").focus();
      else {
      // mozilla based browsers modal popup window
      w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600", modal="yes");
      if (w.opener == null)
        w.opener = self;
      w.focus();
    </script>Though you don't need to know how to read javascript for this example, it helps to understand that this function only does one important thing: it opens a modal popup window of page two in our application while passing values to P2_ENAME, P2_JOB, and P2_SAL. It gathers those values to pass from the names of the HTML DB items provided to it. The call to this function will be added in the next step below.
    Step 5 - Add a popup link next to the P1_SAL field on the form page
    Add a link to the form page that will call the callMyPopup function above and pass it the values it needs. To do so, place the following HTML in the "Post Element Text" field attribute of the P1_SAL item:
    <~a href="javascript:callMyPopup('P1_ENAME','P1_JOB','P1_SAL');">Click for LOV<~/a>NB. remove ~ from above when deploying
    Step 6 - Add the LOV report to the popup page
    The next step is to create a report on the popup page based on the values passed from the form on page one. The tricky part of this report is providing a means for the selected values to be passed back to the form page. This can be achieved by having a column of the report render as a javascript link that would close the popup window and pass the ename, job and sal values for that row back. Start by adding a simple report region to our Modal popup page that uses a query such as:
          select ename, job, sal , 'placeholder' the_link
            from emp
           where ename like '%'||:P2_ENAME||'%'
             and (job = :P2_JOB or :P2_JOB is null)
             and (sal = :P2_SAL or :P2_SAL is null)Note that the last column in this query is just a placeholder. once the region is created, turn that placeholder into a link by doing the following:
    Navigate to the Page Definition for page 2
    Next to the name of the report region created in step 6, Click Q
    Next to the column THE_LINK, click the edit icon
    In the "Link Text" field enter the string "select"
    In the URL field enter: javascript:passBack('#ENAME#','#JOB#','#SAL#'); Click the "Apply Changes" button
    Step 7 - Add the javascript function to the Modal popup page to pass selected values to the (parent) form page.
    In the previous step you added a call to a javascript function, passBack. Now add that function to the top of Modal popup page 2. In the same manner as step 4 above, add that passBack function to the page 2 by putting it in the "HTML Header" field of the page-level attributes screen. The function should look similar to the following:
    <script language="JavaScript">
       function passBack(passVal1, passVal2, passVal3)
         // IE Browser return the passback values in an array
         if (window.showModalDialog) {
           var retVal = new Array(passVal1, passVal2, passVal3);
           window.returnValue = retVal;
           window.close();
         // Mozilla based browsers right the passback values directly into the parent window
         else {
           opener.document.getElementById("P1_ENAME").value = passVal1;
           opener.document.getElementById("P1_JOB").value = passVal2;
           opener.document.getElementById("P1_SAL").value = passVal3;
           opener.document.getElementById("P1_SAL").focus();
           close();
    </script>This function simply sets the values of P1_ENAME, P1_JOB, and P1_SAL with the values of the whatever's stored to the three HTML DB item names passed to it. It also closes the current window and puts the cursor back into the P1_SAL field.
    Step 8 - Polishing
    The basic functionality of this custom modal popup window has been created in steps 1 though 7. To make its usage a little more friendly, it's advisable to add Cancel and Search buttons to the popup window page. The Search button should just be added as a regular button that branches back to the page 2. Adding this button allows users to re-query for LOV options without having to return to our form page. The Cancel button should be created with an "Action" of "Redirect to URL". The "URL Target" of the button should be javascript:window.close(). As the code suggests, the Cancel button would just close the popup window (with no values returned).
    Hope this is of use....

    Everything said above is working fine but in Mozilla small popup is coming in top left corner of browser..
    so please help me so that it is opened in proper width and height in mozilla.

  • Problem with combobox gets dispalyed infront of popup window

    when ever popup window is open and kept on combobox ,combobox appears in front or overlaps the popup window,where exactly i have to check the code.which place of code i have to look into... plz help if there is any problem with css then plz specify which property i have to look into..

    [problem with combobox comes infront of popup window|http://forum.java.sun.com/thread.jspa?threadID=5291468]

Maybe you are looking for